July 2008 - rpmfusion-commits

rpms/arcem/F-8 README_arcem.dribble, NONE, 1.1 arcem-cvs_20070611-improvemakefile.patch, NONE, 1.1 arcem-cvs_20070611-manual.patch, NONE, 1.1 arcem-cvs_20070611-soundfix.patch, NONE, 1.1 arcem-cvs_20070611-uichanges.patch, NONE, 1.1 arcem.sh, NONE, 1.1 arcem.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/arcem/F-8 In directory se02.es.rpmfusion.net:/tmp/cvs-serv32242/F-8 Modified Files: .cvsignore sources Added Files: README_arcem.dribble arcem-cvs_20070611-improvemakefile.patch arcem-cvs_20070611-manual.patch arcem-cvs_20070611-soundfix.patch arcem-cvs_20070611-uichanges.patch arcem.sh arcem.spec Log Message: First import --- NEW FILE README_arcem.dribble --- ArcEm Dribble Readme -------------------- The version of ArcEm from Dribble is launched using a wrapper script which is installed as "/usr/bin/arcem". If arcem is called with the parameter 'auto', or launched via the desktop menu entry then it will automatically setup an appropriate ArcEm environment for you. It will continue to use this environment everytime it's launched in this way. This environment is maintained in your homespace, in the .arcem directory. If ArcEm is launched without the auto parameter then it behaves verbatim and will not use that environment by default. The 'auto' parameter will: -------------------------- * Ensure all of ArcEm's files are kept in and read from ~/.arcem * Setup all the supported extension modules, eg ScrollWheel support and extended screenmodes. * Provide a virtual hard disc inside ArcEm (under RISC OS only) pointing to your homespace. * Launch arcem with the 'ARM Linux' rom, unless a 'RISC OS 3.XX' rom is present in ~/.arcem and called ROM. NOTE: RISC OS roms cannot be included with ArcEm for legal reasons. It is up to the end user to obtain these by a legal means. The 'ARM Linux' rom is largely included so you may see ArcEm running, but is probably of little practical use to most people. Please consult the ArcEm manual.html for further information on using floppy disc images and hard disc images etc. Remember to place these in ~/.arcem if you are using the auto environment. arcem-cvs_20070611-improvemakefile.patch: --- NEW FILE arcem-cvs_20070611-improvemakefile.patch --- --- arcem/Makefile.orig 2006-09-24 14:14:03.000000000 +0100 +++ arcem/Makefile 2007-06-13 20:03:22.000000000 +0100 @@ -50,25 +50,17 @@ # Should stay as LITTLEEND when used in ArcEm ENDIAN=LITTLEEND -WARN = -Wall -Wno-return-type -Wno-unknown-pragmas -Wshadow \ - -Wpointer-arith -Wcast-align -Wstrict-prototypes \ - -Wmissing-prototypes -Wmissing-declarations -Wnested-externs \ - -Wcast-qual -Wwrite-strings - -ifeq ($(PROFILE),yes) -CFLAGS = -O -g -pg -ftest-coverage -fprofile-arcs -else -CFLAGS = -O3 -funroll-loops -fexpensive-optimizations -ffast-math \ - -fomit-frame-pointer -frerun-cse-after-loop -endif +WARN = + +RPMFLAGS = -CFLAGS += \ +CFLAGS = $(RPMFLAGS) \ -D$(ENDIAN) $(CFL) -DNOOS -DNOFPE $(WARN) \ -I$(SYSTEM) -Iarch -I. -prefix=/usr/local +prefix=/usr -INSTALL_DIR = $(prefix)/bin +INSTALL_DIR = INSTALL=cp @@ -138,8 +130,8 @@ endif ifeq (${SYSTEM},X) -CFLAGS += -DSYSTEM_X -I/usr/X11R6/include -LIBS += -L/usr/X11R6/lib -lXext -lX11 +CFLAGS += -DSYSTEM_X -I/usr/include/X11 +LIBS += -lXext -lX11 endif ifeq (${SYSTEM},win) @@ -188,7 +180,8 @@ all: $(TARGET) install: all - $(INSTALL) armul $(INSTALL_DIR) + mkdir -p $(INSTALL_DIR)/$(prefix)/bin + $(INSTALL) arcem $(INSTALL_DIR)/$(prefix)/bin/arcem.bin $(TARGET): $(OBJS) $(MODEL).o $(LD) $(LDFLAGS) $(OBJS) $(LIBS) $(MODEL).o -o $@ arcem-cvs_20070611-manual.patch: --- NEW FILE arcem-cvs_20070611-manual.patch --- --- arcem/manual.html.orig 2003-04-20 23:24:36.000000000 +0100 +++ arcem/manual.html 2007-06-11 21:13:02.000000000 +0100 @@ -1,259 +1,480 @@ <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html><head> - -<title> - ArcEm Manual -</title> - +<html> +<head> +<title>ArcEm Manual</title> </head> <body> +<h1>ArcEm - The Acorn System Emulator</h1> +<h3>Version 1.02, 6th April 2006</h3> +This is a combined manual for the release version 1.00 and the later versions + from CVS, when a feature is only available from the CVS it is marked CVS. + <a href="http://arcem.sf.net/">http://arcem.sf.net</a> + +  +<hr> +<h2>Contents</h2> +<ul> + <li><a href="#install">Installing ArcEm</a></li> + <li><a href="#compiling">Compiling ArcEm</a></li> + <li><a href="using">Using ArcEm</a> + <ul> + <li><a href="#romimages">ROM Images</a></li> + <li><a href="#mouseinput">Mouse Input</a></li> + <li><a href="#floppies">Using floppies</a></li> + <li><a href="#HDimages">Using HD images</a></li> + <li><a href="#commandline">Commandline options CVS</a></li> + <li><a href="#arcemrc">arcemrc file</a></li> + <li><a href="#riscosusage">RISC OS specific Usage</a> + <ul> + <li><a href="#riscosusagehostfs">HostFS CVS</a></li> + <li><a href="#riscosusagescrollwheel">Mouse Scrollwheel support CVS</a></li> + <li><a href="#riscosusageextramodes">Extra Screen Modes CVS</a></li> + </ul> + </li> + </ul> + </li> + <li><a href="#issues">Known Issues and bugs</a> + <ul> + <li><a href="#knownall">All platforms</a></li> + <li><a href="#knownX">Unix/X Windows</a></li> + <li><a href="#knownWIN32">Microsoft Windows</a></li> + <li><a href="#knownOSX">Mac OS X</a></li> + <li><a href="#knownRO">RISC OS</a></li> + <li><a href="#knownGP2X">GP2x</a></li> + <li><a href="#knownAMIGA">Amiga</a></li> + </ul></li> + <li><a href="#changelog">ChangeLog</a> +</ul> +<hr> + +<a name="install"></a> +<h3>Installation</h3> +Once installed all versions require a ROM image file, see below +<ul> + <li>Unix/X Windows + Download the src archive and follow the compilation instructions below. + Once compiled copy the arcemrc file to your home directory as .arcemrc. + When run there is some output on the console. + </li> + </li> + <li>Microsoft Windows + Extract the archive and supply a ROM image, the program is called ArcEm.exe. Create a shortcut to this file if you want to add it to your start menu or desktop. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + Please see the !Help file within the !ArcEm application for usage information. + </li> + <li>GP2x + Copy the arcemrc and hexcmos files to a folder called 'arcem' on the root of your SD card. Add a 'rom' file here, too. + </li> + <li>Amiga + Extract the archive to any directory you choose, just add a file called ROM as described below. + </li> +</ul> +<hr> +<a name="compiling"> +<h3>Compiling ArcEm</h3> +</a> +<ul> + <li>Unix/X Windows + The X windows version compiles up using the 'Makefile' contained in the + root of the source package. If you have a big endian processor, such as + Sparc or PowerPC edit the Makefile to add the -DHOST_BIGENDIAN flag to + the CFLAGS field. In CVS versions simply edit + the HOST_BIGENDIAN=no to HOST_BIGENDIAN=yes near the top of the Makefile. + <pre> + make + </pre> + + </li> + <li>Microsoft Windows + ArcEm will build under <a href="http://sources.redhat.com/cygwin/">Cygwin</a>. + It builds a version which is independent of Cygwin (unlike the previous + version of ArcEm for Windows), so you will also need to ensure you have + mingw-runtime library installed (from Cygwin setup). Use the following + command: + <pre> + make SYSTEM=win + </pre> + Additionally, ArcEm will build in Microsoft Visual C 6. Project files are + provided for this in the 'vc' directory. In CVS versions + there are also project files in 'vc' for Microsoft Studio 2005. + + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + ArcEm builds with GCC. You should use the following command: + <pre> + make SYSTEM=riscos-single + </pre> + It is possible to build with Leo White's RiscXLib if you really want to make + an X Windows version under RISC OS, but that is beyond the scope of + this guide. Finally, it is also possible to cross compile it using <a href="http://hard-mofo.dsvr.net/gcc/">GCCSDK</a>. + e.g.: + <pre> + CC=/home/riscos/cross/bin/gcc make SYSTEM=riscos-single + </pre> + The desktop version of ArcEm has not been developed yet, and will not build. + + </li> + <li>GP2x + The Makefile assumes that you have DevKitGP2X installed in D:/gp2x/ + You can build by simply: + <pre> + make SYSTEM=gp2x + </pre> + + </li> + <li>Amiga + You will need the official Amiga OS4 SDK and GCC, then build with the following commands: +<pre> +stack 500000 +make SYSTEM=amiga +</pre> + It will not compile with anything other than the OS4 includes. GCC 3.4.4 and 4.0.2 are known to work. + + </li> +</ul> <hr> -<h1>ArcEm - Archimedes Emulator</h1> +<a name="using"> +<h3>Using ArcEm</h3> +</a> <a name="romimages"> +<h4>ROM images</h4> +</a> +As ArcEm is only a hardware emulator to make it do anything useful you need + an operating system ROM. ArcEm has been tested with and is known to work with + ARM Linux, RISC OS 3.10, RISC OS 3.11 and RISC OS 3.19. ARM Linux ROMs are + freely available, check the website. RISC OS 3.1x ROMs can be extracted from + a real Acorn machine using the following commands on RISC OS. +<pre> + *save :0.$.ROM1 3800000 3880000 + *save :0.$.ROM2 3880000 3900000 + *save :0.$.ROM3 3900000 3980000 + *save :0.$.ROM4 3980000 3a00000 +</pre> +Copy these files to your host operating system, RISC OS 3.1x supports DOS formatted +floppy discs so you can use them to transfer the files. ArcEm needs the ROM file +to be in one part (rather than the 4 you just created) so join them back together +using this command. + +<ul> + <li>Unix/XWindows + From a shell prompt + <pre>cat ROM1 ROM2 ROM3 ROM4 > ROM</pre> + </li> + <li>Windows + From a cmd.exe command prompt + <pre>copy /b ROM1+ROM2+ROM3+ROM4 ROM</pre> + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + From the commandline + <pre>join ROM1 ROM2 ROM3 ROM4 as ROM</pre> + </li> +</ul> +Alternate sources of ROM images, you can download a copy of the RISC OS 3.10 + ROM image as a support file from the <a href="http://home.tiscali.nl/~jandboer/">!A310emu + website</a>, it's in the file <a href="http://home.tiscali.nl/~jandboer/support2.zip">support2.zip</a> and + is called ro310, you should rename ro310 to ROM before using it with ArcEm. +<a name="mouseinput"> +<h4>Mouse Input</h4> +</a> +Some of the platforms require specific instructions to let you move the mouse + around. +<ul> + <li>Unix/X Windows + Whilst the Main display window has the focus, press the + key on the numeric + keypad to 'capture' the mouse. To 'free' the mouse again for use with the + rest of your X desktop press numeric keypad + again. + </li> + <li>Windows + Although there is some mouse movement when you move the cursor over the + display window, you can use the Unix/XWindows style numeric keypad + toggle + to 'capture' and 'free' the mouse for better performance. Currently mouse + handling on the Windows build is very poor. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + The Amiga version runs full-screen and captures all mouse input until you quit the program. You can quit ArcEm from the menu you can bring up with the Left Amiga key. + </li> +</ul> +<a name="floppies"> +<h4>Using floppies</h4> +</a> +All the platforms support using .adf format floppy disc images. A + disc image is a binary dump of the contents of a floppy disc. ArcEm has no + support for directly using the host computers real floppy disc drive. +The basic support for floppy discs is to allow you to have the following + floppy disc images in the current working directory of the ArcEm executable. + FloppyImage0 + FloppyImage1 + FloppyImage2 + FloppyImage3 + These are then available under RISC OS as the 4 disc drives ADFS:0 to ADFS:3, + on Linux they are accessible as TODO. +Some platforms provide extra support for using floppy discs. +<li>Unix/XWindows + Whilst the control pane window has the focus, pressing 0, 1, 2 or 3 will + eject/insert floppy disc images, those images still have to be named as above, + but with moving of images around you should be able to change discs at run + time. +</li> +<li>Mac OS X + TODO Mention the GUI method of selecting disc images. +</li> +<li>Amiga + A menu to change the disc in drive 0 can be called up with the LAmiga key +</li> +<a name="HDimages"> +<h4>Using HD images</h4> +</a>ArcEm supports up to 4 Harddiscs, hard disc images are binary files that represent a hard drive's contents. ArcEm support the ST506 disc interface from Archimedes computers allowing it to support drives up to 64MB in size. Hard drive images should be placed in the current working directory of ArcEm and be named +HardImage0 +HardImage1 +HardImage2 +HardImage3 +You also need to specify the hard drive "shape" in the arcemrc config file. The "shape" lists the number of Heads, Cylinders, Sectors and the Record Size, these 4 numbers multiplied together are equal to the size in bytes of the hard drive image. +In RISC OS, you will also need to use the !Configure application to set the number of hard drives inside that OS. + +<a name="commandline"> +<h4>Commandline options CVS</h4> +</a> + +CVS versions of ArcEm support commandline options under Unix/X Windows and other platforms. The Amiga version will also accept them as tooltypes. +<table border="1"> +<tr><th>Option</th><th>Meaning</th><th>Allowed values</th><th>Default Value</th></tr> +<tr><td>--help</td><td>Display list of available options and exit</td></tr> +<tr><td>--version</td><td>Display version number and exit</td></tr> +<tr><td>--rom <value></td><td>Specify the name of a romimage other than ROM</td><td>Path from place of execution to ROM image</td><td>ROM</td></tr> +<tr><td>--extnromdir <value></td><td>Specify the directory to use as the extnrom directory</td><td>Path from place of execution for extnrom dir</td><td>extnrom/</td></tr> +<tr><td>--hostfsdir <value></td><td>Specify the directory to use as the base of hostfs</td><td>Path from place of execution to base of hostfs</td><td>hostfs/</td></tr> +<tr><td>--memory <value></td><td>Change the amount of memory the emulated machine has</td><td>256K 512K 1M 2M 4M 8M 12M 16M</td><td>4M</td></tr> +<tr><td>--processor</td><td>Change the emulated machine's processor</td><td>ARM2 ARM3 ARM250</td><td>ARM250</td></tr> + -<h3>Version 1.00, 6th May 2002</h3> -<a href="mailto:peter@chocky.org">Contact</a> +</table> + +<a name="arcemrc"> +<h4>arcemrc file</h4> +</a> +The arcemrc files stores information about the number and 'shape' of harddisc's attached to the emulated machine. Here is an example arcemrc: +<pre> +MFM disc +1 1024 8 32 256 +MFM disc +2 612 4 32 256 +</pre> +The five numbers represent the following: +1) Hard drive number: 0 to 3 inclusive. +2) Number of Cylinders: 1 to 1024 inclusive. +3) Number of Heads: 1 to 256 inclusive. +4) Number of Sectors per track: 1 to 256 inclusive. +5) Sector Length: 256, 512, 1024, 2048, or 4096. + +For the premade hard drive images available on the website the shape information should be available. For your own harddiscs that you have imaged you should check the Harddrive itself, as the number of cylinders, sectors and heads is normally printed on it. -<hr> +<a name="riscosusage"> +<h4>RISC OS specific Usage</h4> +</a> +This section details some of the code that is only relevant when ArcEm is running RISC OS, it does not apply for ARM Linux + +<a name="riscosusagehostfs"> +<h5>HostFS CVS</h5> +</a> +Make sure the files hostfs,ffa, hostfsfiler,ffa and arcemsupport,ffa are copied or 'sym-linked' from their support_modules sub directories into the 'extnrom' directory. +Create a directory called 'hostfs' in your executable directory, if it does not exist already. This directory is the root of the 'virtual harddisc'. (You can override this directory and put it in a different place with a commandline option). +When you boot up RISC OS 3.1x there should be a HostFS icon in the bottom left of the screen, clicking this will open up the host filing system and behaves in the same manner as a real Archimedes harddisc. +Simply copy files on your host into the hostfs directory and they will be available to RISC OS. +RISC OS filetypes are written to the host in the style of NFS mounts on Unix with a ,XXX on the end, eg a textfile would appear to be textfile,ffd. +Files copied into the hostfs directory are unlikely to have their RISC OS filetypes, use the RISC OS 'set type ' function in the filer. -<h2>Contents</h2> +Known Issues: +<ul> + <li>Does not work at all on Windows/RISC OS/GP2X builds of ArcEm.</li> + <li>Files on the host side are not allowed to have dollars in the filename, eg 'textfile$' would not work, but 'textfile' would be fine. + <li>Errors that occur when performing actions on the host filing system are often not well reported under RISC OS. +</ul> + +<a name="riscosusagescrollwheel"> +<h5>Mouse Scrollwheel support CVS</h5> +</a> +Make sure the file scrollwheel,ffa is copied or 'symlinked' from the 'support_modules/scrollwheel' directory into the 'extnrom' directory. +Spinning the scrollwheel up and down in RISC OS over windows that are vertically scrollable works in the way you'd expect. +Known Issues: <ul> - <li><a href="#changelog">ChangeLog</a> + <li>Only works in the Unix/X Windows, MS Windows and Amiga builds of ArcEm.</li> +</ul> - <li><a href="#install">Installation and Usage</a> +<a name="riscosusageextramodes"> +<h5>Additional Screen modes CVS</h5> +</a> +Make sure the file ArcemModes,ffa is copied or 'symlinked' from the 'support_modules/modes' directory into the 'extnrom' directory. + +Once the module is loaded these modes can be chosen in the normal RISC OS way, by typing: +<pre> +*wimpmode <number> +</pre> - <li><a href="#issues">Known Issues</a> +Here's a list of provided modes +<table border="1"> +<tr><th>Mode Number</th><th>X</th><th>Y</th><th>colours</th></tr> +<tr><td>32</td><td>800</td><td>600</td><td>256</td></tr> +<tr><td>100</td><td>1024</td><td>768</td><td>2</td></tr> +<tr><td>101</td><td>1024</td><td>768</td><td>4</td></tr> +<tr><td>102</td><td>1024</td><td>768</td><td>16</td></tr> +<tr><td>104</td><td>1280</td><td>1016</td><td>2</td></tr> +<tr><td>105</td><td>1280</td><td>1016</td><td>4</td></tr> +<tr><td>108</td><td>1152</td><td>864</td><td>2</td></tr> +<tr><td>109</td><td>1152</td><td>864</td><td>4</td></tr> +<tr><td>112</td><td>1400</td><td>520</td><td>16</td></tr> +<tr><td>120</td><td>1600</td><td>600</td><td>16</td></tr> +<tr><td>122</td><td>240</td><td>320</td><td>2</td></tr> +<tr><td>123</td><td>240</td><td>320</td><td>4</td></tr> +<tr><td>124</td><td>240</td><td>320</td><td>16</td></tr> +<tr><td>125</td><td>240</td><td>320</td><td>256</td></tr> +</table> - <li><a href="#faq">Quick FAQ</a> +Known Issues: +<ul> + <li>Modes larger than 800x600 will only work under Unix/X Windows and Amiga builds of ArcEm, however modes 32, 122, 123, 124 and 125 will work on all platforms.</li> + <li>Mode 122 is slightly buggy and looks very odd.</li> </ul> +<hr> +<a name="issues"> +<h3>Known Issues and bugs</h3> +</a> + +<a name="knownall"> +<h4>All platforms</h4> +</a> +There is no support for emulating 256K/512K/1MB RAM machines. +2MB RAM support incorrectly has a 32KB page size set, real machines have a 16KB page size, RISC OS copes with this and boots as normal. +All interlaced modes are displayed at their logical resolution, this means displays in some modes appear to be half the height they would appear on real monitors. + +<a name="knownX"> +<h4>Unix/X Windows</h4> +</a> +The display window doesn't resize on mode changes and remains at 800x600 (resolved in CVS). + +<a name="knownWIN32"> +<h4>Microsoft Windows</h4> +</a> +The version 1.00 binary is very unstable and crashes regularly. +The only menu items that do anything are Quit and About. +The mouse handling is very poor. +The Windows version has no diagnostics if anything goes wrong and will quite without warning (unless you rebuild with a console). +ARM Linux does not currently work in the Windows version of + the emulator. There is an unknown issue with harddrive access. + +<a name="knownOSX"> +<h4>Mac OS X</h4> +</a> +TODO -<hr> +<a name="knownRO"> +<h4>RISC OS</h4> +</a> +The RISC OS version is very slow. - +<a name="knownGP2X"> +<h4>GP2x</h4> +</a> +The GP2x version is very slow. + +<a name="knownAMIGA"> +<h4>Amiga</h4> +</a> +There is no error output when run from Workbench (it appears to do nothing +when ROM is not found). You can get the error output by +starting it from the Shell. +ArcEm always opens an 8-bit screen even if the emulation requests a lower +depth. +There is intentionally no keyboard remapping, keys are mapped based on +position. +It will only run full screen, not windowed. + +<hr> <a name="changelog"></a> <h3>ChangeLog:</h3> - - -<dl> - <dd> - 1.00 - 6th May 2002 - - <ul> - <li>New manual and new SourceForge page. Other documentation deprecated. - <li>Added project files for MS VC++, and fix warnings provoked by it. - <li>Further split of windowing/non-windowing functionality to - aid division of architecture-independent files. - <li>Windows version made independent from Cygwin. - <li>Windows support imported from eQRD version. Features brought - inline with other versions, including icon change, and - same format for choices file. - <li>Entirety of build warnings fixed under GCC, including those - that appeared from turning on harsh warning flags. - <li>General tidying. - <li>Makefile rearranged so that default Unix builds are more sensible. - </ul> - </dd> -</dl> - - -<dl> - <dd> - 0.60 - 30th September 2001 - - <ul> - <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls - <li> Split of the windowing aspects of the code, to allow independent - development. - <li> Some small speed ups. - <li> Source code tidying and warning fixes. - </ul> - </dd> -</dl> - - <dl> - <dd> - 0.50 - 4th September 1999 - </dd> + <dd> + 1.01 - 26th February 2006 + <ul> + <li>Added notes for GP2X port + </ul> + </dd> </dl> - - <dl> - <dd> - 0.40 - 27th July 1998 - </dd> + <dd> + 1.00 - 6th May 2002 + <ul> + <li>New manual and new SourceForge page. Other documentation deprecated. + <li>Added project files for MS VC++, and fix warnings provoked by it. + <li>Further split of windowing/non-windowing functionality to aid division + of architecture-independent files. + <li>Windows version made independent from Cygwin. + <li>Windows support imported from eQRD version. Features brought inline + with other versions, including icon change, and same format for choices + file. + <li>Entirety of build warnings fixed under GCC, including those that appeared + from turning on harsh warning flags. + <li>General tidying. + <li>Makefile rearranged so that default Unix builds are more sensible. + </ul> + </dd> </dl> - - <dl> - <dd>For details of older changes, see docs directory.</dd> + <dd> + 0.60 - 30th September 2001 + <ul> + <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls + <li> Split of the windowing aspects of the code, to allow independent development. + <li> Some small speed ups. + <li> Source code tidying and warning fixes. + </ul> + </dd> </dl> - -<hr> - - - -<a name="install"></a> -<h3>Installation and Usage:</h3> - -The emulator is initially configured for one MFM hard disc. If you -wish to change that, you will need to edit the arcemrc file. - -To make a useful program, you will have to add to this the file "ROM" -containing an Operating System ROM to your OS set up below. You may also have a -drive image file named "HardImage1". This can either usefully be a RISC OS -filecore image or Linux ext2 image. Note that RISC OS will quite -happily boot without a harddrive. - - -<h4>Windows</h4> - <dl> - <dd> - Warning: ARM Linux does not currently work in the Windows version - of the emulator. There is an unknown issue with harddrive access. - - Unpack the archive to a location of your choice. You should have - the following files: - - <ul> - <li>index.html, maual.html - Documentation. - <li>ArcEm.exe - The emulator itself. - <li>hexcmos - CMOS settings for the emulator. - <li>arcemrc - Configuration file. - </ul> - - The emulator is started by running the executable. Unfortunately, - if anything goes wrong, the emulator will simply quit with little or no - warning. This will be improved in future versions. - - - - Pressing the + key on the keypad will toggle display of the Windows - mouse. - - - </dd> + <dd> + 0.50 - 4th September 1999 + </dd> </dl> - - -<h4>RISC OS</h4> - <dl> - <dd> - Please see the !Help file within the !ArcEm application for usage - information. - - </dd> + <dd> + 0.40 - 27th July 1998 + </dd> </dl> - - -<h4>Unix</h4> - <dl> - <dd> - Copy the arcemrc file to your home directory as .arcemrc. Usage is - otherwise similar to the Windows notes, but with some output on - a console. - - - As for the Windows version, pressing the + key on the keypad will - capture the mouse. - - - If your keyboard doesn't generate the KP_Add keysym, use xmodmap(1) - to alter its configuration. - - <pre> - #! /bin/sh - - xmodmap - <<\E - ! Make the Happy Hacker's two diamond keys into Mode_switch keys so I - ! can access KP_Add by pressing Shift-Diamond-equal. - - keycode 115 = Mode_switch - keycode 116 = Mode_switch - clear mod3 - add mod3 = Mode_switch - keycode equal = equal plus KP_Equal KP_Add - E - </pre> - </dd> + <dd>For details of older changes, see docs directory.</dd> </dl> - -<hr> - - - -<a name="issues"></a> -<h3>Known Issues:</h3> - -<ul> - <li>The only menu item that does anything in Windows is Quit. - <li>The mouse handling in Windows is rather poor. - <li>The Windows version has no diagnostics if anything goes wrong - (unless you rebuild with a console). - <li>The RISC OS version is very slow. - <li>The X-Windows version has no size handling - you have to resize - the window manually. -</ul> - -<hr> - - - -<a name="faq"></a> -<h3>Quick FAQ:</h3> - -Q. Can ArcEm run RISC OS 3.5 or later? - -A. No. ArcEm only emulates Archimedes-style hardware. RiscPC-style -hardware is required for RISC OS 3.5 or later. I have no plans -to add this, due to the time and research involved, but if someone else -wanted to, I would be happy to help. - -Q. Where can I get RISC OS 3.1 ROMs? - -A. From your A5000, A3020, etc. ROM images obtained from -any other source may be of questionable legality. This topic has been -discussed at length in various forums, and will not be repeated here. - -To save ROMs from your machine, use four 720K DOS formatted floppies (or -1.44MB if your machine supports it) and use the following commands for -each floppy: - -<pre> - *save :0.$.ROM1 3800000 3880000 - *save :0.$.ROM2 3880000 3900000 - *save :0.$.ROM3 3900000 3980000 - *save :0.$.ROM4 3980000 3a00000 -</pre> - -Finally, ArcEm requires that the ROM image be a single file (unlike -the other emulators), so concatenate the files using your favourite method -to produce the final file. - - - -Q. It doesn't do anything when it starts/feature X doesn't seem to work? - -A. Recompile it with debugging turned on, and find out why. -I don't have a better answer than that for the time being if you -can't make it work. - -<hr> - -<a href="mailto:peter@chocky.org">Peter Naulls</a> - </body> </html> - arcem-cvs_20070611-soundfix.patch: --- NEW FILE arcem-cvs_20070611-soundfix.patch --- --- arcem/X/sound.c.orig 2005-01-29 17:18:20.000000000 +0000 +++ arcem/X/sound.c 2007-08-08 17:53:12.000000000 +0100 @@ -111,7 +111,7 @@ int sound_init(void) { - if ((soundDevice = open("/dev/dsp", O_CREAT | O_WRONLY )) < 0) { + if ((soundDevice = open("/dev/dsp", O_WRONLY )) < 0) { fprintf(stderr, "Could not open audio device /dev/dsp\n"); return -1; } arcem-cvs_20070611-uichanges.patch: --- NEW FILE arcem-cvs_20070611-uichanges.patch --- --- arcem/X/ControlPane.c.orig 2006-03-23 13:46:03.000000000 +0000 +++ arcem/X/ControlPane.c 2007-06-11 21:22:01.000000000 +0100 @@ -16,12 +16,12 @@ #include <string.h> -#define CTRLPANEWIDTH 640 -#define CTRLPANEHEIGHT 100 +#define CTRLPANEWIDTH 600 +#define CTRLPANEHEIGHT 110 #define LEDHEIGHT 15 #define LEDWIDTH 15 -#define LEDTOPS 90 +#define LEDTOPS 100 #define DC DISPLAYCONTROL @@ -139,18 +139,22 @@ y += 2; y = TextCenteredH(state, "http://arcem.sf.net/", y, 0, CTRLPANEWIDTH); - y+=2; + y += 2; XDrawLine(HD.disp, HD.ControlPane, HD.ControlPaneGC, 0, y, CTRLPANEWIDTH-1, y); y += 2; - y = TextCenteredH(state, "Type `q' to quit.", y, 0, CTRLPANEWIDTH); + y = TextCenteredH(state, "Type q to quit.", y, 0, CTRLPANEWIDTH); - y += 2; - y = TextCenteredH(state, "Type `0', `1', `2', or `3' to " + y += 4; + y = TextCenteredH(state, "Type 0, 1, 2, or 3 to " "insert/eject floppy image.", y, 0, CTRLPANEWIDTH); - y+=2; + y += 4; + y = TextCenteredH(state, "Type + on keypad to capture/" + "uncapture the mouse.", y, 0, CTRLPANEWIDTH); + + y += 2; draw_keyboard_leds(KBD.Leds); draw_floppy_leds(~ioc.LatchA & 0xf); } /* ControlPane_Redraw */ --- NEW FILE arcem.sh --- #!/bin/sh # # Wrapper script for arcem which sets up a useful default environment for the # user and ensures files are saved in a sensible location (.arcem), if the auto # parameter is used. Otherwise it simply executes arcem verbatim passing it any # parameters received. arcembin='/usr/bin/arcem.bin'; moddir='/usr/share/arcem/modules'; kdialog='/usr/bin/kdialog'; zenity='/usr/bin/zenity'; xmessage='/usr/bin/xmessage'; msg="This appears to be the first time you've launched ArcEm, so a default\ environment has been configured for you. For ArcEm to fully function you\ require either a 'RISC OS 3.XX' rom, or a freely available 'ARM Linux' rom. The rom file should be called 'ROM' and installed into the following directory: $HOME/.arcem NOTE: By default ArcEm will be launched with the bundled 'ARM Linux' rom unless\ a rom is installed in the above location. Please consult the documentation for further information" # Check binary exists and is executable if [ ! -x $arcembin ] ; then echo "error: $arcembin missing or not executable" 1>&2 exit 1 fi # If we are not in auto mode, run arcem verbatim, passing any parameters if [ "$1" != "auto" ] ; then exec $arcembin "$@" fi # Check home exists and is a directory if [ ! -d $HOME ] ; then echo "error: $HOME is missing or not a directory" 1>&2 exit 2 fi # Check if ~/.arcem exists and is a directory. If not, make it and setup up # the subsequent default environment. If .arcem already exists then no changes # will be made. Notify the user of the default environment and the need for a # ROM if [ ! -d "$HOME/.arcem" ] ; then mkdir -p "$HOME/.arcem/extnrom" # Setup extention modules pushd "$HOME/.arcem/extnrom" > /dev/null ln -s "$moddir/"* . popd > /dev/null if [ -x $kdialog ] ; then $kdialog --title "First Run" --msgbox "$msg" elif [ -x $zenity ] ; then $zenity --title "First Run" --info --text "$msg" else echo -e $msg | fold -s --width=50 | $xmessage -center -file - fi # Output to console also echo -e $msg fi # Change to ~/.arcem to ensure files are loaded/saved there cd "$HOME/.arcem" # Launch arcem with the linux ROM if no user ROM if [ -f "$HOME/.arcem/ROM" ] ; then exec $arcembin --hostfsdir $HOME --memory 16M else exec $arcembin --hostfsdir $HOME --memory 16M --rom /usr/share/arcem/linuxrom/ROM fi --- NEW FILE arcem.spec --- # The source is retrieved from cvs: # cvs -z3 -d:pserver:anonymous@arcem.cvs.sourceforge.net:/cvsroot/arcem co -P arcem # The arcem directory should be compressed as the following: # arcem-cvs_YYYYMMDD.tar.bz2 %define cvsdate 20070611 Name: arcem Version: 1.10 Release: 3.cvs_%{cvsdate}%{?dist} Summary: Highly portable Acorn Archimedes emulator Group: Applications/Emulators License: GPLv2+ URL: http://arcem.sourceforge.net Source0: %{name}-cvs_%{cvsdate}.tar.bz2 Source1: http://arcem.sourceforge.net/linuxrom.zip Source2: arcem.sh Source3: README_arcem.dribble Patch0: arcem-cvs_20070611-improvemakefile.patch Patch1: arcem-cvs_20070611-uichanges.patch Patch2: arcem-cvs_20070611-manual.patch Patch3: arcem-cvs_20070611-soundfix.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: desktop-file-utils BuildRequires: ImageMagick BuildRequires: libX11-devel BuildRequires: libXext-devel Requires: hicolor-icon-theme Requires: xorg-x11-apps %description ArcEm is a Acorn Archimedes A400 hardware emulator that is highly portable. As it's a hardware emulator it's capable of running multiple operating systems including RISC OS 3.XX and ARM Linux. ArcEm requires either a RISC OS 3.XX or ARM Linux ROM to fully function. Only the Linux ROM can be legally included. %prep %setup -qn %{name} # Makefile is heavily patched because it's largely broken in many ways %patch0 -p1 %patch1 -p1 %patch2 -p1 %patch3 -p1 unzip -qq %{SOURCE1} %build # Sound support seems stable but experimental, but largely doesn't work on PPC %ifarch %{ix86} x86_64 make %{?_smp_mflags} RPMFLAGS="%{optflags}" SOUND_SUPPORT=yes %else make %{?_smp_mflags} RPMFLAGS="%{optflags}" HOST_BIGENDIAN=yes %endif #Build icon image convert win/arc.ico %{name}.png # Build desktop icon cat >%{name}.desktop <<EOF [Desktop Entry] Encoding=UTF-8 Name=Arcem GenericName=Acorn Archimedes Emulator Comment=%{summary} Exec=%{name} auto Icon=%{name} Terminal=false Type=Application StartupNotify=false Categories=Game;Emulator; EOF %install rm -rf %{buildroot} make install INSTALL_DIR=%{buildroot} mkdir -p %{buildroot}%{_datadir}/%{name}/{modules,linuxrom} mkdir -p %{buildroot}%{_datadir}/icons/hicolor/32x32/apps install -pm0644 support_modules/*/*,ffa %{buildroot}%{_datadir}/%{name}/modules install -pm0644 ROM.linux %{buildroot}%{_datadir}/%{name}/linuxrom/ROM install -pm0755 %{SOURCE2} %{buildroot}%{_bindir}/%{name} install -pm0644 %{name}-0.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/%{name}.png install -pm0644 %{SOURCE3} . desktop-file-install --vendor dribble \ --dir %{buildroot}%{_datadir}/applications \ %{name}.desktop %clean rm -rf %{buildroot} %post touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %postun touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %files %defattr(-,root,root,-) %{_bindir}/%{name} %{_bindir}/%{name}.bin %{_datadir}/%{name} %{_datadir}/applications/dribble-%{name}.desktop %{_datadir}/icons/hicolor/32x32/apps/%{name}.png %doc docs/5thColumn.txt docs/COPYING index.html manual.html README_arcem.dribble %changelog * Wed Dec 12 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-3.cvs_20070611 - Minor spec changes for devel * Wed Aug 08 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-2.cvs_20070611 - Added patch to fix sound.c compilation on newer GCCs * Tue Aug 07 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-1.cvs_20070611 - Minor cleanups to the SPEC - Updated license field due to new guidelines * Mon Jun 11 2007 Ian Chapman <packages(a)amiga-hardware.com> 1.10-0.cvs_20070611 - Initial Release Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/arcem/F-8/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 31 May 2008 14:02:00 -0000 1.1 +++ .cvsignore 19 Jul 2008 18:37:09 -0000 1.2 @@ -0,0 +1,2 @@ +arcem-cvs_20070611.tar.bz2 +linuxrom.zip Index: sources =================================================================== RCS file: /cvs/free/rpms/arcem/F-8/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 31 May 2008 14:02:00 -0000 1.1 +++ sources 19 Jul 2008 18:37:09 -0000 1.2 @@ -0,0 +1,2 @@ +6f0ad6c1f9fd80887e26192736e085b6 arcem-cvs_20070611.tar.bz2 +a8b171aee91fda454a625b3dcfda7bdc linuxrom.zip

16 years, 4 months

1
0
0 / 0

rpms/arcem/F-9 README_arcem.dribble, NONE, 1.1 arcem-cvs_20070611-improvemakefile.patch, NONE, 1.1 arcem-cvs_20070611-manual.patch, NONE, 1.1 arcem-cvs_20070611-soundfix.patch, NONE, 1.1 arcem-cvs_20070611-uichanges.patch, NONE, 1.1 arcem.sh, NONE, 1.1 arcem.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/arcem/F-9 In directory se02.es.rpmfusion.net:/tmp/cvs-serv31925/F-9 Modified Files: .cvsignore sources Added Files: README_arcem.dribble arcem-cvs_20070611-improvemakefile.patch arcem-cvs_20070611-manual.patch arcem-cvs_20070611-soundfix.patch arcem-cvs_20070611-uichanges.patch arcem.sh arcem.spec Log Message: First import --- NEW FILE README_arcem.dribble --- ArcEm Dribble Readme -------------------- The version of ArcEm from Dribble is launched using a wrapper script which is installed as "/usr/bin/arcem". If arcem is called with the parameter 'auto', or launched via the desktop menu entry then it will automatically setup an appropriate ArcEm environment for you. It will continue to use this environment everytime it's launched in this way. This environment is maintained in your homespace, in the .arcem directory. If ArcEm is launched without the auto parameter then it behaves verbatim and will not use that environment by default. The 'auto' parameter will: -------------------------- * Ensure all of ArcEm's files are kept in and read from ~/.arcem * Setup all the supported extension modules, eg ScrollWheel support and extended screenmodes. * Provide a virtual hard disc inside ArcEm (under RISC OS only) pointing to your homespace. * Launch arcem with the 'ARM Linux' rom, unless a 'RISC OS 3.XX' rom is present in ~/.arcem and called ROM. NOTE: RISC OS roms cannot be included with ArcEm for legal reasons. It is up to the end user to obtain these by a legal means. The 'ARM Linux' rom is largely included so you may see ArcEm running, but is probably of little practical use to most people. Please consult the ArcEm manual.html for further information on using floppy disc images and hard disc images etc. Remember to place these in ~/.arcem if you are using the auto environment. arcem-cvs_20070611-improvemakefile.patch: --- NEW FILE arcem-cvs_20070611-improvemakefile.patch --- --- arcem/Makefile.orig 2006-09-24 14:14:03.000000000 +0100 +++ arcem/Makefile 2007-06-13 20:03:22.000000000 +0100 @@ -50,25 +50,17 @@ # Should stay as LITTLEEND when used in ArcEm ENDIAN=LITTLEEND -WARN = -Wall -Wno-return-type -Wno-unknown-pragmas -Wshadow \ - -Wpointer-arith -Wcast-align -Wstrict-prototypes \ - -Wmissing-prototypes -Wmissing-declarations -Wnested-externs \ - -Wcast-qual -Wwrite-strings - -ifeq ($(PROFILE),yes) -CFLAGS = -O -g -pg -ftest-coverage -fprofile-arcs -else -CFLAGS = -O3 -funroll-loops -fexpensive-optimizations -ffast-math \ - -fomit-frame-pointer -frerun-cse-after-loop -endif +WARN = + +RPMFLAGS = -CFLAGS += \ +CFLAGS = $(RPMFLAGS) \ -D$(ENDIAN) $(CFL) -DNOOS -DNOFPE $(WARN) \ -I$(SYSTEM) -Iarch -I. -prefix=/usr/local +prefix=/usr -INSTALL_DIR = $(prefix)/bin +INSTALL_DIR = INSTALL=cp @@ -138,8 +130,8 @@ endif ifeq (${SYSTEM},X) -CFLAGS += -DSYSTEM_X -I/usr/X11R6/include -LIBS += -L/usr/X11R6/lib -lXext -lX11 +CFLAGS += -DSYSTEM_X -I/usr/include/X11 +LIBS += -lXext -lX11 endif ifeq (${SYSTEM},win) @@ -188,7 +180,8 @@ all: $(TARGET) install: all - $(INSTALL) armul $(INSTALL_DIR) + mkdir -p $(INSTALL_DIR)/$(prefix)/bin + $(INSTALL) arcem $(INSTALL_DIR)/$(prefix)/bin/arcem.bin $(TARGET): $(OBJS) $(MODEL).o $(LD) $(LDFLAGS) $(OBJS) $(LIBS) $(MODEL).o -o $@ arcem-cvs_20070611-manual.patch: --- NEW FILE arcem-cvs_20070611-manual.patch --- --- arcem/manual.html.orig 2003-04-20 23:24:36.000000000 +0100 +++ arcem/manual.html 2007-06-11 21:13:02.000000000 +0100 @@ -1,259 +1,480 @@ <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html><head> - -<title> - ArcEm Manual -</title> - +<html> +<head> +<title>ArcEm Manual</title> </head> <body> +<h1>ArcEm - The Acorn System Emulator</h1> +<h3>Version 1.02, 6th April 2006</h3> +This is a combined manual for the release version 1.00 and the later versions + from CVS, when a feature is only available from the CVS it is marked CVS. + <a href="http://arcem.sf.net/">http://arcem.sf.net</a> + +  +<hr> +<h2>Contents</h2> +<ul> + <li><a href="#install">Installing ArcEm</a></li> + <li><a href="#compiling">Compiling ArcEm</a></li> + <li><a href="using">Using ArcEm</a> + <ul> + <li><a href="#romimages">ROM Images</a></li> + <li><a href="#mouseinput">Mouse Input</a></li> + <li><a href="#floppies">Using floppies</a></li> + <li><a href="#HDimages">Using HD images</a></li> + <li><a href="#commandline">Commandline options CVS</a></li> + <li><a href="#arcemrc">arcemrc file</a></li> + <li><a href="#riscosusage">RISC OS specific Usage</a> + <ul> + <li><a href="#riscosusagehostfs">HostFS CVS</a></li> + <li><a href="#riscosusagescrollwheel">Mouse Scrollwheel support CVS</a></li> + <li><a href="#riscosusageextramodes">Extra Screen Modes CVS</a></li> + </ul> + </li> + </ul> + </li> + <li><a href="#issues">Known Issues and bugs</a> + <ul> + <li><a href="#knownall">All platforms</a></li> + <li><a href="#knownX">Unix/X Windows</a></li> + <li><a href="#knownWIN32">Microsoft Windows</a></li> + <li><a href="#knownOSX">Mac OS X</a></li> + <li><a href="#knownRO">RISC OS</a></li> + <li><a href="#knownGP2X">GP2x</a></li> + <li><a href="#knownAMIGA">Amiga</a></li> + </ul></li> + <li><a href="#changelog">ChangeLog</a> +</ul> +<hr> + +<a name="install"></a> +<h3>Installation</h3> +Once installed all versions require a ROM image file, see below +<ul> + <li>Unix/X Windows + Download the src archive and follow the compilation instructions below. + Once compiled copy the arcemrc file to your home directory as .arcemrc. + When run there is some output on the console. + </li> + </li> + <li>Microsoft Windows + Extract the archive and supply a ROM image, the program is called ArcEm.exe. Create a shortcut to this file if you want to add it to your start menu or desktop. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + Please see the !Help file within the !ArcEm application for usage information. + </li> + <li>GP2x + Copy the arcemrc and hexcmos files to a folder called 'arcem' on the root of your SD card. Add a 'rom' file here, too. + </li> + <li>Amiga + Extract the archive to any directory you choose, just add a file called ROM as described below. + </li> +</ul> +<hr> +<a name="compiling"> +<h3>Compiling ArcEm</h3> +</a> +<ul> + <li>Unix/X Windows + The X windows version compiles up using the 'Makefile' contained in the + root of the source package. If you have a big endian processor, such as + Sparc or PowerPC edit the Makefile to add the -DHOST_BIGENDIAN flag to + the CFLAGS field. In CVS versions simply edit + the HOST_BIGENDIAN=no to HOST_BIGENDIAN=yes near the top of the Makefile. + <pre> + make + </pre> + + </li> + <li>Microsoft Windows + ArcEm will build under <a href="http://sources.redhat.com/cygwin/">Cygwin</a>. + It builds a version which is independent of Cygwin (unlike the previous + version of ArcEm for Windows), so you will also need to ensure you have + mingw-runtime library installed (from Cygwin setup). Use the following + command: + <pre> + make SYSTEM=win + </pre> + Additionally, ArcEm will build in Microsoft Visual C 6. Project files are + provided for this in the 'vc' directory. In CVS versions + there are also project files in 'vc' for Microsoft Studio 2005. + + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + ArcEm builds with GCC. You should use the following command: + <pre> + make SYSTEM=riscos-single + </pre> + It is possible to build with Leo White's RiscXLib if you really want to make + an X Windows version under RISC OS, but that is beyond the scope of + this guide. Finally, it is also possible to cross compile it using <a href="http://hard-mofo.dsvr.net/gcc/">GCCSDK</a>. + e.g.: + <pre> + CC=/home/riscos/cross/bin/gcc make SYSTEM=riscos-single + </pre> + The desktop version of ArcEm has not been developed yet, and will not build. + + </li> + <li>GP2x + The Makefile assumes that you have DevKitGP2X installed in D:/gp2x/ + You can build by simply: + <pre> + make SYSTEM=gp2x + </pre> + + </li> + <li>Amiga + You will need the official Amiga OS4 SDK and GCC, then build with the following commands: +<pre> +stack 500000 +make SYSTEM=amiga +</pre> + It will not compile with anything other than the OS4 includes. GCC 3.4.4 and 4.0.2 are known to work. + + </li> +</ul> <hr> -<h1>ArcEm - Archimedes Emulator</h1> +<a name="using"> +<h3>Using ArcEm</h3> +</a> <a name="romimages"> +<h4>ROM images</h4> +</a> +As ArcEm is only a hardware emulator to make it do anything useful you need + an operating system ROM. ArcEm has been tested with and is known to work with + ARM Linux, RISC OS 3.10, RISC OS 3.11 and RISC OS 3.19. ARM Linux ROMs are + freely available, check the website. RISC OS 3.1x ROMs can be extracted from + a real Acorn machine using the following commands on RISC OS. +<pre> + *save :0.$.ROM1 3800000 3880000 + *save :0.$.ROM2 3880000 3900000 + *save :0.$.ROM3 3900000 3980000 + *save :0.$.ROM4 3980000 3a00000 +</pre> +Copy these files to your host operating system, RISC OS 3.1x supports DOS formatted +floppy discs so you can use them to transfer the files. ArcEm needs the ROM file +to be in one part (rather than the 4 you just created) so join them back together +using this command. + +<ul> + <li>Unix/XWindows + From a shell prompt + <pre>cat ROM1 ROM2 ROM3 ROM4 > ROM</pre> + </li> + <li>Windows + From a cmd.exe command prompt + <pre>copy /b ROM1+ROM2+ROM3+ROM4 ROM</pre> + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + From the commandline + <pre>join ROM1 ROM2 ROM3 ROM4 as ROM</pre> + </li> +</ul> +Alternate sources of ROM images, you can download a copy of the RISC OS 3.10 + ROM image as a support file from the <a href="http://home.tiscali.nl/~jandboer/">!A310emu + website</a>, it's in the file <a href="http://home.tiscali.nl/~jandboer/support2.zip">support2.zip</a> and + is called ro310, you should rename ro310 to ROM before using it with ArcEm. +<a name="mouseinput"> +<h4>Mouse Input</h4> +</a> +Some of the platforms require specific instructions to let you move the mouse + around. +<ul> + <li>Unix/X Windows + Whilst the Main display window has the focus, press the + key on the numeric + keypad to 'capture' the mouse. To 'free' the mouse again for use with the + rest of your X desktop press numeric keypad + again. + </li> + <li>Windows + Although there is some mouse movement when you move the cursor over the + display window, you can use the Unix/XWindows style numeric keypad + toggle + to 'capture' and 'free' the mouse for better performance. Currently mouse + handling on the Windows build is very poor. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + The Amiga version runs full-screen and captures all mouse input until you quit the program. You can quit ArcEm from the menu you can bring up with the Left Amiga key. + </li> +</ul> +<a name="floppies"> +<h4>Using floppies</h4> +</a> +All the platforms support using .adf format floppy disc images. A + disc image is a binary dump of the contents of a floppy disc. ArcEm has no + support for directly using the host computers real floppy disc drive. +The basic support for floppy discs is to allow you to have the following + floppy disc images in the current working directory of the ArcEm executable. + FloppyImage0 + FloppyImage1 + FloppyImage2 + FloppyImage3 + These are then available under RISC OS as the 4 disc drives ADFS:0 to ADFS:3, + on Linux they are accessible as TODO. +Some platforms provide extra support for using floppy discs. +<li>Unix/XWindows + Whilst the control pane window has the focus, pressing 0, 1, 2 or 3 will + eject/insert floppy disc images, those images still have to be named as above, + but with moving of images around you should be able to change discs at run + time. +</li> +<li>Mac OS X + TODO Mention the GUI method of selecting disc images. +</li> +<li>Amiga + A menu to change the disc in drive 0 can be called up with the LAmiga key +</li> +<a name="HDimages"> +<h4>Using HD images</h4> +</a>ArcEm supports up to 4 Harddiscs, hard disc images are binary files that represent a hard drive's contents. ArcEm support the ST506 disc interface from Archimedes computers allowing it to support drives up to 64MB in size. Hard drive images should be placed in the current working directory of ArcEm and be named +HardImage0 +HardImage1 +HardImage2 +HardImage3 +You also need to specify the hard drive "shape" in the arcemrc config file. The "shape" lists the number of Heads, Cylinders, Sectors and the Record Size, these 4 numbers multiplied together are equal to the size in bytes of the hard drive image. +In RISC OS, you will also need to use the !Configure application to set the number of hard drives inside that OS. + +<a name="commandline"> +<h4>Commandline options CVS</h4> +</a> + +CVS versions of ArcEm support commandline options under Unix/X Windows and other platforms. The Amiga version will also accept them as tooltypes. +<table border="1"> +<tr><th>Option</th><th>Meaning</th><th>Allowed values</th><th>Default Value</th></tr> +<tr><td>--help</td><td>Display list of available options and exit</td></tr> +<tr><td>--version</td><td>Display version number and exit</td></tr> +<tr><td>--rom <value></td><td>Specify the name of a romimage other than ROM</td><td>Path from place of execution to ROM image</td><td>ROM</td></tr> +<tr><td>--extnromdir <value></td><td>Specify the directory to use as the extnrom directory</td><td>Path from place of execution for extnrom dir</td><td>extnrom/</td></tr> +<tr><td>--hostfsdir <value></td><td>Specify the directory to use as the base of hostfs</td><td>Path from place of execution to base of hostfs</td><td>hostfs/</td></tr> +<tr><td>--memory <value></td><td>Change the amount of memory the emulated machine has</td><td>256K 512K 1M 2M 4M 8M 12M 16M</td><td>4M</td></tr> +<tr><td>--processor</td><td>Change the emulated machine's processor</td><td>ARM2 ARM3 ARM250</td><td>ARM250</td></tr> + -<h3>Version 1.00, 6th May 2002</h3> -<a href="mailto:peter@chocky.org">Contact</a> +</table> + +<a name="arcemrc"> +<h4>arcemrc file</h4> +</a> +The arcemrc files stores information about the number and 'shape' of harddisc's attached to the emulated machine. Here is an example arcemrc: +<pre> +MFM disc +1 1024 8 32 256 +MFM disc +2 612 4 32 256 +</pre> +The five numbers represent the following: +1) Hard drive number: 0 to 3 inclusive. +2) Number of Cylinders: 1 to 1024 inclusive. +3) Number of Heads: 1 to 256 inclusive. +4) Number of Sectors per track: 1 to 256 inclusive. +5) Sector Length: 256, 512, 1024, 2048, or 4096. + +For the premade hard drive images available on the website the shape information should be available. For your own harddiscs that you have imaged you should check the Harddrive itself, as the number of cylinders, sectors and heads is normally printed on it. -<hr> +<a name="riscosusage"> +<h4>RISC OS specific Usage</h4> +</a> +This section details some of the code that is only relevant when ArcEm is running RISC OS, it does not apply for ARM Linux + +<a name="riscosusagehostfs"> +<h5>HostFS CVS</h5> +</a> +Make sure the files hostfs,ffa, hostfsfiler,ffa and arcemsupport,ffa are copied or 'sym-linked' from their support_modules sub directories into the 'extnrom' directory. +Create a directory called 'hostfs' in your executable directory, if it does not exist already. This directory is the root of the 'virtual harddisc'. (You can override this directory and put it in a different place with a commandline option). +When you boot up RISC OS 3.1x there should be a HostFS icon in the bottom left of the screen, clicking this will open up the host filing system and behaves in the same manner as a real Archimedes harddisc. +Simply copy files on your host into the hostfs directory and they will be available to RISC OS. +RISC OS filetypes are written to the host in the style of NFS mounts on Unix with a ,XXX on the end, eg a textfile would appear to be textfile,ffd. +Files copied into the hostfs directory are unlikely to have their RISC OS filetypes, use the RISC OS 'set type ' function in the filer. -<h2>Contents</h2> +Known Issues: +<ul> + <li>Does not work at all on Windows/RISC OS/GP2X builds of ArcEm.</li> + <li>Files on the host side are not allowed to have dollars in the filename, eg 'textfile$' would not work, but 'textfile' would be fine. + <li>Errors that occur when performing actions on the host filing system are often not well reported under RISC OS. +</ul> + +<a name="riscosusagescrollwheel"> +<h5>Mouse Scrollwheel support CVS</h5> +</a> +Make sure the file scrollwheel,ffa is copied or 'symlinked' from the 'support_modules/scrollwheel' directory into the 'extnrom' directory. +Spinning the scrollwheel up and down in RISC OS over windows that are vertically scrollable works in the way you'd expect. +Known Issues: <ul> - <li><a href="#changelog">ChangeLog</a> + <li>Only works in the Unix/X Windows, MS Windows and Amiga builds of ArcEm.</li> +</ul> - <li><a href="#install">Installation and Usage</a> +<a name="riscosusageextramodes"> +<h5>Additional Screen modes CVS</h5> +</a> +Make sure the file ArcemModes,ffa is copied or 'symlinked' from the 'support_modules/modes' directory into the 'extnrom' directory. + +Once the module is loaded these modes can be chosen in the normal RISC OS way, by typing: +<pre> +*wimpmode <number> +</pre> - <li><a href="#issues">Known Issues</a> +Here's a list of provided modes +<table border="1"> +<tr><th>Mode Number</th><th>X</th><th>Y</th><th>colours</th></tr> +<tr><td>32</td><td>800</td><td>600</td><td>256</td></tr> +<tr><td>100</td><td>1024</td><td>768</td><td>2</td></tr> +<tr><td>101</td><td>1024</td><td>768</td><td>4</td></tr> +<tr><td>102</td><td>1024</td><td>768</td><td>16</td></tr> +<tr><td>104</td><td>1280</td><td>1016</td><td>2</td></tr> +<tr><td>105</td><td>1280</td><td>1016</td><td>4</td></tr> +<tr><td>108</td><td>1152</td><td>864</td><td>2</td></tr> +<tr><td>109</td><td>1152</td><td>864</td><td>4</td></tr> +<tr><td>112</td><td>1400</td><td>520</td><td>16</td></tr> +<tr><td>120</td><td>1600</td><td>600</td><td>16</td></tr> +<tr><td>122</td><td>240</td><td>320</td><td>2</td></tr> +<tr><td>123</td><td>240</td><td>320</td><td>4</td></tr> +<tr><td>124</td><td>240</td><td>320</td><td>16</td></tr> +<tr><td>125</td><td>240</td><td>320</td><td>256</td></tr> +</table> - <li><a href="#faq">Quick FAQ</a> +Known Issues: +<ul> + <li>Modes larger than 800x600 will only work under Unix/X Windows and Amiga builds of ArcEm, however modes 32, 122, 123, 124 and 125 will work on all platforms.</li> + <li>Mode 122 is slightly buggy and looks very odd.</li> </ul> +<hr> +<a name="issues"> +<h3>Known Issues and bugs</h3> +</a> + +<a name="knownall"> +<h4>All platforms</h4> +</a> +There is no support for emulating 256K/512K/1MB RAM machines. +2MB RAM support incorrectly has a 32KB page size set, real machines have a 16KB page size, RISC OS copes with this and boots as normal. +All interlaced modes are displayed at their logical resolution, this means displays in some modes appear to be half the height they would appear on real monitors. + +<a name="knownX"> +<h4>Unix/X Windows</h4> +</a> +The display window doesn't resize on mode changes and remains at 800x600 (resolved in CVS). + +<a name="knownWIN32"> +<h4>Microsoft Windows</h4> +</a> +The version 1.00 binary is very unstable and crashes regularly. +The only menu items that do anything are Quit and About. +The mouse handling is very poor. +The Windows version has no diagnostics if anything goes wrong and will quite without warning (unless you rebuild with a console). +ARM Linux does not currently work in the Windows version of + the emulator. There is an unknown issue with harddrive access. + +<a name="knownOSX"> +<h4>Mac OS X</h4> +</a> +TODO -<hr> +<a name="knownRO"> +<h4>RISC OS</h4> +</a> +The RISC OS version is very slow. - +<a name="knownGP2X"> +<h4>GP2x</h4> +</a> +The GP2x version is very slow. + +<a name="knownAMIGA"> +<h4>Amiga</h4> +</a> +There is no error output when run from Workbench (it appears to do nothing +when ROM is not found). You can get the error output by +starting it from the Shell. +ArcEm always opens an 8-bit screen even if the emulation requests a lower +depth. +There is intentionally no keyboard remapping, keys are mapped based on +position. +It will only run full screen, not windowed. + +<hr> <a name="changelog"></a> <h3>ChangeLog:</h3> - - -<dl> - <dd> - 1.00 - 6th May 2002 - - <ul> - <li>New manual and new SourceForge page. Other documentation deprecated. - <li>Added project files for MS VC++, and fix warnings provoked by it. - <li>Further split of windowing/non-windowing functionality to - aid division of architecture-independent files. - <li>Windows version made independent from Cygwin. - <li>Windows support imported from eQRD version. Features brought - inline with other versions, including icon change, and - same format for choices file. - <li>Entirety of build warnings fixed under GCC, including those - that appeared from turning on harsh warning flags. - <li>General tidying. - <li>Makefile rearranged so that default Unix builds are more sensible. - </ul> - </dd> -</dl> - - -<dl> - <dd> - 0.60 - 30th September 2001 - - <ul> - <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls - <li> Split of the windowing aspects of the code, to allow independent - development. - <li> Some small speed ups. - <li> Source code tidying and warning fixes. - </ul> - </dd> -</dl> - - <dl> - <dd> - 0.50 - 4th September 1999 - </dd> + <dd> + 1.01 - 26th February 2006 + <ul> + <li>Added notes for GP2X port + </ul> + </dd> </dl> - - <dl> - <dd> - 0.40 - 27th July 1998 - </dd> + <dd> + 1.00 - 6th May 2002 + <ul> + <li>New manual and new SourceForge page. Other documentation deprecated. + <li>Added project files for MS VC++, and fix warnings provoked by it. + <li>Further split of windowing/non-windowing functionality to aid division + of architecture-independent files. + <li>Windows version made independent from Cygwin. + <li>Windows support imported from eQRD version. Features brought inline + with other versions, including icon change, and same format for choices + file. + <li>Entirety of build warnings fixed under GCC, including those that appeared + from turning on harsh warning flags. + <li>General tidying. + <li>Makefile rearranged so that default Unix builds are more sensible. + </ul> + </dd> </dl> - - <dl> - <dd>For details of older changes, see docs directory.</dd> + <dd> + 0.60 - 30th September 2001 + <ul> + <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls + <li> Split of the windowing aspects of the code, to allow independent development. + <li> Some small speed ups. + <li> Source code tidying and warning fixes. + </ul> + </dd> </dl> - -<hr> - - - -<a name="install"></a> -<h3>Installation and Usage:</h3> - -The emulator is initially configured for one MFM hard disc. If you -wish to change that, you will need to edit the arcemrc file. - -To make a useful program, you will have to add to this the file "ROM" -containing an Operating System ROM to your OS set up below. You may also have a -drive image file named "HardImage1". This can either usefully be a RISC OS -filecore image or Linux ext2 image. Note that RISC OS will quite -happily boot without a harddrive. - - -<h4>Windows</h4> - <dl> - <dd> - Warning: ARM Linux does not currently work in the Windows version - of the emulator. There is an unknown issue with harddrive access. - - Unpack the archive to a location of your choice. You should have - the following files: - - <ul> - <li>index.html, maual.html - Documentation. - <li>ArcEm.exe - The emulator itself. - <li>hexcmos - CMOS settings for the emulator. - <li>arcemrc - Configuration file. - </ul> - - The emulator is started by running the executable. Unfortunately, - if anything goes wrong, the emulator will simply quit with little or no - warning. This will be improved in future versions. - - - - Pressing the + key on the keypad will toggle display of the Windows - mouse. - - - </dd> + <dd> + 0.50 - 4th September 1999 + </dd> </dl> - - -<h4>RISC OS</h4> - <dl> - <dd> - Please see the !Help file within the !ArcEm application for usage - information. - - </dd> + <dd> + 0.40 - 27th July 1998 + </dd> </dl> - - -<h4>Unix</h4> - <dl> - <dd> - Copy the arcemrc file to your home directory as .arcemrc. Usage is - otherwise similar to the Windows notes, but with some output on - a console. - - - As for the Windows version, pressing the + key on the keypad will - capture the mouse. - - - If your keyboard doesn't generate the KP_Add keysym, use xmodmap(1) - to alter its configuration. - - <pre> - #! /bin/sh - - xmodmap - <<\E - ! Make the Happy Hacker's two diamond keys into Mode_switch keys so I - ! can access KP_Add by pressing Shift-Diamond-equal. - - keycode 115 = Mode_switch - keycode 116 = Mode_switch - clear mod3 - add mod3 = Mode_switch - keycode equal = equal plus KP_Equal KP_Add - E - </pre> - </dd> + <dd>For details of older changes, see docs directory.</dd> </dl> - -<hr> - - - -<a name="issues"></a> -<h3>Known Issues:</h3> - -<ul> - <li>The only menu item that does anything in Windows is Quit. - <li>The mouse handling in Windows is rather poor. - <li>The Windows version has no diagnostics if anything goes wrong - (unless you rebuild with a console). - <li>The RISC OS version is very slow. - <li>The X-Windows version has no size handling - you have to resize - the window manually. -</ul> - -<hr> - - - -<a name="faq"></a> -<h3>Quick FAQ:</h3> - -Q. Can ArcEm run RISC OS 3.5 or later? - -A. No. ArcEm only emulates Archimedes-style hardware. RiscPC-style -hardware is required for RISC OS 3.5 or later. I have no plans -to add this, due to the time and research involved, but if someone else -wanted to, I would be happy to help. - -Q. Where can I get RISC OS 3.1 ROMs? - -A. From your A5000, A3020, etc. ROM images obtained from -any other source may be of questionable legality. This topic has been -discussed at length in various forums, and will not be repeated here. - -To save ROMs from your machine, use four 720K DOS formatted floppies (or -1.44MB if your machine supports it) and use the following commands for -each floppy: - -<pre> - *save :0.$.ROM1 3800000 3880000 - *save :0.$.ROM2 3880000 3900000 - *save :0.$.ROM3 3900000 3980000 - *save :0.$.ROM4 3980000 3a00000 -</pre> - -Finally, ArcEm requires that the ROM image be a single file (unlike -the other emulators), so concatenate the files using your favourite method -to produce the final file. - - - -Q. It doesn't do anything when it starts/feature X doesn't seem to work? - -A. Recompile it with debugging turned on, and find out why. -I don't have a better answer than that for the time being if you -can't make it work. - -<hr> - -<a href="mailto:peter@chocky.org">Peter Naulls</a> - </body> </html> - arcem-cvs_20070611-soundfix.patch: --- NEW FILE arcem-cvs_20070611-soundfix.patch --- --- arcem/X/sound.c.orig 2005-01-29 17:18:20.000000000 +0000 +++ arcem/X/sound.c 2007-08-08 17:53:12.000000000 +0100 @@ -111,7 +111,7 @@ int sound_init(void) { - if ((soundDevice = open("/dev/dsp", O_CREAT | O_WRONLY )) < 0) { + if ((soundDevice = open("/dev/dsp", O_WRONLY )) < 0) { fprintf(stderr, "Could not open audio device /dev/dsp\n"); return -1; } arcem-cvs_20070611-uichanges.patch: --- NEW FILE arcem-cvs_20070611-uichanges.patch --- --- arcem/X/ControlPane.c.orig 2006-03-23 13:46:03.000000000 +0000 +++ arcem/X/ControlPane.c 2007-06-11 21:22:01.000000000 +0100 @@ -16,12 +16,12 @@ #include <string.h> -#define CTRLPANEWIDTH 640 -#define CTRLPANEHEIGHT 100 +#define CTRLPANEWIDTH 600 +#define CTRLPANEHEIGHT 110 #define LEDHEIGHT 15 #define LEDWIDTH 15 -#define LEDTOPS 90 +#define LEDTOPS 100 #define DC DISPLAYCONTROL @@ -139,18 +139,22 @@ y += 2; y = TextCenteredH(state, "http://arcem.sf.net/", y, 0, CTRLPANEWIDTH); - y+=2; + y += 2; XDrawLine(HD.disp, HD.ControlPane, HD.ControlPaneGC, 0, y, CTRLPANEWIDTH-1, y); y += 2; - y = TextCenteredH(state, "Type `q' to quit.", y, 0, CTRLPANEWIDTH); + y = TextCenteredH(state, "Type q to quit.", y, 0, CTRLPANEWIDTH); - y += 2; - y = TextCenteredH(state, "Type `0', `1', `2', or `3' to " + y += 4; + y = TextCenteredH(state, "Type 0, 1, 2, or 3 to " "insert/eject floppy image.", y, 0, CTRLPANEWIDTH); - y+=2; + y += 4; + y = TextCenteredH(state, "Type + on keypad to capture/" + "uncapture the mouse.", y, 0, CTRLPANEWIDTH); + + y += 2; draw_keyboard_leds(KBD.Leds); draw_floppy_leds(~ioc.LatchA & 0xf); } /* ControlPane_Redraw */ --- NEW FILE arcem.sh --- #!/bin/sh # # Wrapper script for arcem which sets up a useful default environment for the # user and ensures files are saved in a sensible location (.arcem), if the auto # parameter is used. Otherwise it simply executes arcem verbatim passing it any # parameters received. arcembin='/usr/bin/arcem.bin'; moddir='/usr/share/arcem/modules'; kdialog='/usr/bin/kdialog'; zenity='/usr/bin/zenity'; xmessage='/usr/bin/xmessage'; msg="This appears to be the first time you've launched ArcEm, so a default\ environment has been configured for you. For ArcEm to fully function you\ require either a 'RISC OS 3.XX' rom, or a freely available 'ARM Linux' rom. The rom file should be called 'ROM' and installed into the following directory: $HOME/.arcem NOTE: By default ArcEm will be launched with the bundled 'ARM Linux' rom unless\ a rom is installed in the above location. Please consult the documentation for further information" # Check binary exists and is executable if [ ! -x $arcembin ] ; then echo "error: $arcembin missing or not executable" 1>&2 exit 1 fi # If we are not in auto mode, run arcem verbatim, passing any parameters if [ "$1" != "auto" ] ; then exec $arcembin "$@" fi # Check home exists and is a directory if [ ! -d $HOME ] ; then echo "error: $HOME is missing or not a directory" 1>&2 exit 2 fi # Check if ~/.arcem exists and is a directory. If not, make it and setup up # the subsequent default environment. If .arcem already exists then no changes # will be made. Notify the user of the default environment and the need for a # ROM if [ ! -d "$HOME/.arcem" ] ; then mkdir -p "$HOME/.arcem/extnrom" # Setup extention modules pushd "$HOME/.arcem/extnrom" > /dev/null ln -s "$moddir/"* . popd > /dev/null if [ -x $kdialog ] ; then $kdialog --title "First Run" --msgbox "$msg" elif [ -x $zenity ] ; then $zenity --title "First Run" --info --text "$msg" else echo -e $msg | fold -s --width=50 | $xmessage -center -file - fi # Output to console also echo -e $msg fi # Change to ~/.arcem to ensure files are loaded/saved there cd "$HOME/.arcem" # Launch arcem with the linux ROM if no user ROM if [ -f "$HOME/.arcem/ROM" ] ; then exec $arcembin --hostfsdir $HOME --memory 16M else exec $arcembin --hostfsdir $HOME --memory 16M --rom /usr/share/arcem/linuxrom/ROM fi --- NEW FILE arcem.spec --- # The source is retrieved from cvs: # cvs -z3 -d:pserver:anonymous@arcem.cvs.sourceforge.net:/cvsroot/arcem co -P arcem # The arcem directory should be compressed as the following: # arcem-cvs_YYYYMMDD.tar.bz2 %define cvsdate 20070611 Name: arcem Version: 1.10 Release: 3.cvs_%{cvsdate}%{?dist} Summary: Highly portable Acorn Archimedes emulator Group: Applications/Emulators License: GPLv2+ URL: http://arcem.sourceforge.net Source0: %{name}-cvs_%{cvsdate}.tar.bz2 Source1: http://arcem.sourceforge.net/linuxrom.zip Source2: arcem.sh Source3: README_arcem.dribble Patch0: arcem-cvs_20070611-improvemakefile.patch Patch1: arcem-cvs_20070611-uichanges.patch Patch2: arcem-cvs_20070611-manual.patch Patch3: arcem-cvs_20070611-soundfix.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: desktop-file-utils BuildRequires: ImageMagick BuildRequires: libX11-devel BuildRequires: libXext-devel Requires: hicolor-icon-theme Requires: xorg-x11-apps %description ArcEm is a Acorn Archimedes A400 hardware emulator that is highly portable. As it's a hardware emulator it's capable of running multiple operating systems including RISC OS 3.XX and ARM Linux. ArcEm requires either a RISC OS 3.XX or ARM Linux ROM to fully function. Only the Linux ROM can be legally included. %prep %setup -qn %{name} # Makefile is heavily patched because it's largely broken in many ways %patch0 -p1 %patch1 -p1 %patch2 -p1 %patch3 -p1 unzip -qq %{SOURCE1} %build # Sound support seems stable but experimental, but largely doesn't work on PPC %ifarch %{ix86} x86_64 make %{?_smp_mflags} RPMFLAGS="%{optflags}" SOUND_SUPPORT=yes %else make %{?_smp_mflags} RPMFLAGS="%{optflags}" HOST_BIGENDIAN=yes %endif #Build icon image convert win/arc.ico %{name}.png # Build desktop icon cat >%{name}.desktop <<EOF [Desktop Entry] Encoding=UTF-8 Name=Arcem GenericName=Acorn Archimedes Emulator Comment=%{summary} Exec=%{name} auto Icon=%{name} Terminal=false Type=Application StartupNotify=false Categories=Game;Emulator; EOF %install rm -rf %{buildroot} make install INSTALL_DIR=%{buildroot} mkdir -p %{buildroot}%{_datadir}/%{name}/{modules,linuxrom} mkdir -p %{buildroot}%{_datadir}/icons/hicolor/32x32/apps install -pm0644 support_modules/*/*,ffa %{buildroot}%{_datadir}/%{name}/modules install -pm0644 ROM.linux %{buildroot}%{_datadir}/%{name}/linuxrom/ROM install -pm0755 %{SOURCE2} %{buildroot}%{_bindir}/%{name} install -pm0644 %{name}-0.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/%{name}.png install -pm0644 %{SOURCE3} . desktop-file-install --vendor dribble \ --dir %{buildroot}%{_datadir}/applications \ %{name}.desktop %clean rm -rf %{buildroot} %post touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %postun touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %files %defattr(-,root,root,-) %{_bindir}/%{name} %{_bindir}/%{name}.bin %{_datadir}/%{name} %{_datadir}/applications/dribble-%{name}.desktop %{_datadir}/icons/hicolor/32x32/apps/%{name}.png %doc docs/5thColumn.txt docs/COPYING index.html manual.html README_arcem.dribble %changelog * Wed Dec 12 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-3.cvs_20070611 - Minor spec changes for devel * Wed Aug 08 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-2.cvs_20070611 - Added patch to fix sound.c compilation on newer GCCs * Tue Aug 07 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-1.cvs_20070611 - Minor cleanups to the SPEC - Updated license field due to new guidelines * Mon Jun 11 2007 Ian Chapman <packages(a)amiga-hardware.com> 1.10-0.cvs_20070611 - Initial Release Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/arcem/F-9/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 31 May 2008 14:02:00 -0000 1.1 +++ .cvsignore 19 Jul 2008 18:36:01 -0000 1.2 @@ -0,0 +1,2 @@ +arcem-cvs_20070611.tar.bz2 +linuxrom.zip Index: sources =================================================================== RCS file: /cvs/free/rpms/arcem/F-9/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 31 May 2008 14:02:00 -0000 1.1 +++ sources 19 Jul 2008 18:36:01 -0000 1.2 @@ -0,0 +1,2 @@ +6f0ad6c1f9fd80887e26192736e085b6 arcem-cvs_20070611.tar.bz2 +a8b171aee91fda454a625b3dcfda7bdc linuxrom.zip

16 years, 4 months

1
0
0 / 0

rpms/arcem/devel README_arcem.dribble, NONE, 1.1 arcem-cvs_20070611-improvemakefile.patch, NONE, 1.1 arcem-cvs_20070611-manual.patch, NONE, 1.1 arcem-cvs_20070611-soundfix.patch, NONE, 1.1 arcem-cvs_20070611-uichanges.patch, NONE, 1.1 arcem.sh, NONE, 1.1 arcem.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/arcem/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv31604/devel Modified Files: .cvsignore sources Added Files: README_arcem.dribble arcem-cvs_20070611-improvemakefile.patch arcem-cvs_20070611-manual.patch arcem-cvs_20070611-soundfix.patch arcem-cvs_20070611-uichanges.patch arcem.sh arcem.spec Log Message: First import --- NEW FILE README_arcem.dribble --- ArcEm Dribble Readme -------------------- The version of ArcEm from Dribble is launched using a wrapper script which is installed as "/usr/bin/arcem". If arcem is called with the parameter 'auto', or launched via the desktop menu entry then it will automatically setup an appropriate ArcEm environment for you. It will continue to use this environment everytime it's launched in this way. This environment is maintained in your homespace, in the .arcem directory. If ArcEm is launched without the auto parameter then it behaves verbatim and will not use that environment by default. The 'auto' parameter will: -------------------------- * Ensure all of ArcEm's files are kept in and read from ~/.arcem * Setup all the supported extension modules, eg ScrollWheel support and extended screenmodes. * Provide a virtual hard disc inside ArcEm (under RISC OS only) pointing to your homespace. * Launch arcem with the 'ARM Linux' rom, unless a 'RISC OS 3.XX' rom is present in ~/.arcem and called ROM. NOTE: RISC OS roms cannot be included with ArcEm for legal reasons. It is up to the end user to obtain these by a legal means. The 'ARM Linux' rom is largely included so you may see ArcEm running, but is probably of little practical use to most people. Please consult the ArcEm manual.html for further information on using floppy disc images and hard disc images etc. Remember to place these in ~/.arcem if you are using the auto environment. arcem-cvs_20070611-improvemakefile.patch: --- NEW FILE arcem-cvs_20070611-improvemakefile.patch --- --- arcem/Makefile.orig 2006-09-24 14:14:03.000000000 +0100 +++ arcem/Makefile 2007-06-13 20:03:22.000000000 +0100 @@ -50,25 +50,17 @@ # Should stay as LITTLEEND when used in ArcEm ENDIAN=LITTLEEND -WARN = -Wall -Wno-return-type -Wno-unknown-pragmas -Wshadow \ - -Wpointer-arith -Wcast-align -Wstrict-prototypes \ - -Wmissing-prototypes -Wmissing-declarations -Wnested-externs \ - -Wcast-qual -Wwrite-strings - -ifeq ($(PROFILE),yes) -CFLAGS = -O -g -pg -ftest-coverage -fprofile-arcs -else -CFLAGS = -O3 -funroll-loops -fexpensive-optimizations -ffast-math \ - -fomit-frame-pointer -frerun-cse-after-loop -endif +WARN = + +RPMFLAGS = -CFLAGS += \ +CFLAGS = $(RPMFLAGS) \ -D$(ENDIAN) $(CFL) -DNOOS -DNOFPE $(WARN) \ -I$(SYSTEM) -Iarch -I. -prefix=/usr/local +prefix=/usr -INSTALL_DIR = $(prefix)/bin +INSTALL_DIR = INSTALL=cp @@ -138,8 +130,8 @@ endif ifeq (${SYSTEM},X) -CFLAGS += -DSYSTEM_X -I/usr/X11R6/include -LIBS += -L/usr/X11R6/lib -lXext -lX11 +CFLAGS += -DSYSTEM_X -I/usr/include/X11 +LIBS += -lXext -lX11 endif ifeq (${SYSTEM},win) @@ -188,7 +180,8 @@ all: $(TARGET) install: all - $(INSTALL) armul $(INSTALL_DIR) + mkdir -p $(INSTALL_DIR)/$(prefix)/bin + $(INSTALL) arcem $(INSTALL_DIR)/$(prefix)/bin/arcem.bin $(TARGET): $(OBJS) $(MODEL).o $(LD) $(LDFLAGS) $(OBJS) $(LIBS) $(MODEL).o -o $@ arcem-cvs_20070611-manual.patch: --- NEW FILE arcem-cvs_20070611-manual.patch --- --- arcem/manual.html.orig 2003-04-20 23:24:36.000000000 +0100 +++ arcem/manual.html 2007-06-11 21:13:02.000000000 +0100 @@ -1,259 +1,480 @@ <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/strict.dtd"> -<html><head> - -<title> - ArcEm Manual -</title> - +<html> +<head> +<title>ArcEm Manual</title> </head> <body> +<h1>ArcEm - The Acorn System Emulator</h1> +<h3>Version 1.02, 6th April 2006</h3> +This is a combined manual for the release version 1.00 and the later versions + from CVS, when a feature is only available from the CVS it is marked CVS. + <a href="http://arcem.sf.net/">http://arcem.sf.net</a> + +  +<hr> +<h2>Contents</h2> +<ul> + <li><a href="#install">Installing ArcEm</a></li> + <li><a href="#compiling">Compiling ArcEm</a></li> + <li><a href="using">Using ArcEm</a> + <ul> + <li><a href="#romimages">ROM Images</a></li> + <li><a href="#mouseinput">Mouse Input</a></li> + <li><a href="#floppies">Using floppies</a></li> + <li><a href="#HDimages">Using HD images</a></li> + <li><a href="#commandline">Commandline options CVS</a></li> + <li><a href="#arcemrc">arcemrc file</a></li> + <li><a href="#riscosusage">RISC OS specific Usage</a> + <ul> + <li><a href="#riscosusagehostfs">HostFS CVS</a></li> + <li><a href="#riscosusagescrollwheel">Mouse Scrollwheel support CVS</a></li> + <li><a href="#riscosusageextramodes">Extra Screen Modes CVS</a></li> + </ul> + </li> + </ul> + </li> + <li><a href="#issues">Known Issues and bugs</a> + <ul> + <li><a href="#knownall">All platforms</a></li> + <li><a href="#knownX">Unix/X Windows</a></li> + <li><a href="#knownWIN32">Microsoft Windows</a></li> + <li><a href="#knownOSX">Mac OS X</a></li> + <li><a href="#knownRO">RISC OS</a></li> + <li><a href="#knownGP2X">GP2x</a></li> + <li><a href="#knownAMIGA">Amiga</a></li> + </ul></li> + <li><a href="#changelog">ChangeLog</a> +</ul> +<hr> + +<a name="install"></a> +<h3>Installation</h3> +Once installed all versions require a ROM image file, see below +<ul> + <li>Unix/X Windows + Download the src archive and follow the compilation instructions below. + Once compiled copy the arcemrc file to your home directory as .arcemrc. + When run there is some output on the console. + </li> + </li> + <li>Microsoft Windows + Extract the archive and supply a ROM image, the program is called ArcEm.exe. Create a shortcut to this file if you want to add it to your start menu or desktop. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + Please see the !Help file within the !ArcEm application for usage information. + </li> + <li>GP2x + Copy the arcemrc and hexcmos files to a folder called 'arcem' on the root of your SD card. Add a 'rom' file here, too. + </li> + <li>Amiga + Extract the archive to any directory you choose, just add a file called ROM as described below. + </li> +</ul> +<hr> +<a name="compiling"> +<h3>Compiling ArcEm</h3> +</a> +<ul> + <li>Unix/X Windows + The X windows version compiles up using the 'Makefile' contained in the + root of the source package. If you have a big endian processor, such as + Sparc or PowerPC edit the Makefile to add the -DHOST_BIGENDIAN flag to + the CFLAGS field. In CVS versions simply edit + the HOST_BIGENDIAN=no to HOST_BIGENDIAN=yes near the top of the Makefile. + <pre> + make + </pre> + + </li> + <li>Microsoft Windows + ArcEm will build under <a href="http://sources.redhat.com/cygwin/">Cygwin</a>. + It builds a version which is independent of Cygwin (unlike the previous + version of ArcEm for Windows), so you will also need to ensure you have + mingw-runtime library installed (from Cygwin setup). Use the following + command: + <pre> + make SYSTEM=win + </pre> + Additionally, ArcEm will build in Microsoft Visual C 6. Project files are + provided for this in the 'vc' directory. In CVS versions + there are also project files in 'vc' for Microsoft Studio 2005. + + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + ArcEm builds with GCC. You should use the following command: + <pre> + make SYSTEM=riscos-single + </pre> + It is possible to build with Leo White's RiscXLib if you really want to make + an X Windows version under RISC OS, but that is beyond the scope of + this guide. Finally, it is also possible to cross compile it using <a href="http://hard-mofo.dsvr.net/gcc/">GCCSDK</a>. + e.g.: + <pre> + CC=/home/riscos/cross/bin/gcc make SYSTEM=riscos-single + </pre> + The desktop version of ArcEm has not been developed yet, and will not build. + + </li> + <li>GP2x + The Makefile assumes that you have DevKitGP2X installed in D:/gp2x/ + You can build by simply: + <pre> + make SYSTEM=gp2x + </pre> + + </li> + <li>Amiga + You will need the official Amiga OS4 SDK and GCC, then build with the following commands: +<pre> +stack 500000 +make SYSTEM=amiga +</pre> + It will not compile with anything other than the OS4 includes. GCC 3.4.4 and 4.0.2 are known to work. + + </li> +</ul> <hr> -<h1>ArcEm - Archimedes Emulator</h1> +<a name="using"> +<h3>Using ArcEm</h3> +</a> <a name="romimages"> +<h4>ROM images</h4> +</a> +As ArcEm is only a hardware emulator to make it do anything useful you need + an operating system ROM. ArcEm has been tested with and is known to work with + ARM Linux, RISC OS 3.10, RISC OS 3.11 and RISC OS 3.19. ARM Linux ROMs are + freely available, check the website. RISC OS 3.1x ROMs can be extracted from + a real Acorn machine using the following commands on RISC OS. +<pre> + *save :0.$.ROM1 3800000 3880000 + *save :0.$.ROM2 3880000 3900000 + *save :0.$.ROM3 3900000 3980000 + *save :0.$.ROM4 3980000 3a00000 +</pre> +Copy these files to your host operating system, RISC OS 3.1x supports DOS formatted +floppy discs so you can use them to transfer the files. ArcEm needs the ROM file +to be in one part (rather than the 4 you just created) so join them back together +using this command. + +<ul> + <li>Unix/XWindows + From a shell prompt + <pre>cat ROM1 ROM2 ROM3 ROM4 > ROM</pre> + </li> + <li>Windows + From a cmd.exe command prompt + <pre>copy /b ROM1+ROM2+ROM3+ROM4 ROM</pre> + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + From the commandline + <pre>join ROM1 ROM2 ROM3 ROM4 as ROM</pre> + </li> +</ul> +Alternate sources of ROM images, you can download a copy of the RISC OS 3.10 + ROM image as a support file from the <a href="http://home.tiscali.nl/~jandboer/">!A310emu + website</a>, it's in the file <a href="http://home.tiscali.nl/~jandboer/support2.zip">support2.zip</a> and + is called ro310, you should rename ro310 to ROM before using it with ArcEm. +<a name="mouseinput"> +<h4>Mouse Input</h4> +</a> +Some of the platforms require specific instructions to let you move the mouse + around. +<ul> + <li>Unix/X Windows + Whilst the Main display window has the focus, press the + key on the numeric + keypad to 'capture' the mouse. To 'free' the mouse again for use with the + rest of your X desktop press numeric keypad + again. + </li> + <li>Windows + Although there is some mouse movement when you move the cursor over the + display window, you can use the Unix/XWindows style numeric keypad + toggle + to 'capture' and 'free' the mouse for better performance. Currently mouse + handling on the Windows build is very poor. + </li> + <li>Mac OS X + TODO + </li> + <li>RISC OS + TODO + </li> + <li>GP2X + TODO + </li> + <li>Amiga + The Amiga version runs full-screen and captures all mouse input until you quit the program. You can quit ArcEm from the menu you can bring up with the Left Amiga key. + </li> +</ul> +<a name="floppies"> +<h4>Using floppies</h4> +</a> +All the platforms support using .adf format floppy disc images. A + disc image is a binary dump of the contents of a floppy disc. ArcEm has no + support for directly using the host computers real floppy disc drive. +The basic support for floppy discs is to allow you to have the following + floppy disc images in the current working directory of the ArcEm executable. + FloppyImage0 + FloppyImage1 + FloppyImage2 + FloppyImage3 + These are then available under RISC OS as the 4 disc drives ADFS:0 to ADFS:3, + on Linux they are accessible as TODO. +Some platforms provide extra support for using floppy discs. +<li>Unix/XWindows + Whilst the control pane window has the focus, pressing 0, 1, 2 or 3 will + eject/insert floppy disc images, those images still have to be named as above, + but with moving of images around you should be able to change discs at run + time. +</li> +<li>Mac OS X + TODO Mention the GUI method of selecting disc images. +</li> +<li>Amiga + A menu to change the disc in drive 0 can be called up with the LAmiga key +</li> +<a name="HDimages"> +<h4>Using HD images</h4> +</a>ArcEm supports up to 4 Harddiscs, hard disc images are binary files that represent a hard drive's contents. ArcEm support the ST506 disc interface from Archimedes computers allowing it to support drives up to 64MB in size. Hard drive images should be placed in the current working directory of ArcEm and be named +HardImage0 +HardImage1 +HardImage2 +HardImage3 +You also need to specify the hard drive "shape" in the arcemrc config file. The "shape" lists the number of Heads, Cylinders, Sectors and the Record Size, these 4 numbers multiplied together are equal to the size in bytes of the hard drive image. +In RISC OS, you will also need to use the !Configure application to set the number of hard drives inside that OS. + +<a name="commandline"> +<h4>Commandline options CVS</h4> +</a> + +CVS versions of ArcEm support commandline options under Unix/X Windows and other platforms. The Amiga version will also accept them as tooltypes. +<table border="1"> +<tr><th>Option</th><th>Meaning</th><th>Allowed values</th><th>Default Value</th></tr> +<tr><td>--help</td><td>Display list of available options and exit</td></tr> +<tr><td>--version</td><td>Display version number and exit</td></tr> +<tr><td>--rom <value></td><td>Specify the name of a romimage other than ROM</td><td>Path from place of execution to ROM image</td><td>ROM</td></tr> +<tr><td>--extnromdir <value></td><td>Specify the directory to use as the extnrom directory</td><td>Path from place of execution for extnrom dir</td><td>extnrom/</td></tr> +<tr><td>--hostfsdir <value></td><td>Specify the directory to use as the base of hostfs</td><td>Path from place of execution to base of hostfs</td><td>hostfs/</td></tr> +<tr><td>--memory <value></td><td>Change the amount of memory the emulated machine has</td><td>256K 512K 1M 2M 4M 8M 12M 16M</td><td>4M</td></tr> +<tr><td>--processor</td><td>Change the emulated machine's processor</td><td>ARM2 ARM3 ARM250</td><td>ARM250</td></tr> + -<h3>Version 1.00, 6th May 2002</h3> -<a href="mailto:peter@chocky.org">Contact</a> +</table> + +<a name="arcemrc"> +<h4>arcemrc file</h4> +</a> +The arcemrc files stores information about the number and 'shape' of harddisc's attached to the emulated machine. Here is an example arcemrc: +<pre> +MFM disc +1 1024 8 32 256 +MFM disc +2 612 4 32 256 +</pre> +The five numbers represent the following: +1) Hard drive number: 0 to 3 inclusive. +2) Number of Cylinders: 1 to 1024 inclusive. +3) Number of Heads: 1 to 256 inclusive. +4) Number of Sectors per track: 1 to 256 inclusive. +5) Sector Length: 256, 512, 1024, 2048, or 4096. + +For the premade hard drive images available on the website the shape information should be available. For your own harddiscs that you have imaged you should check the Harddrive itself, as the number of cylinders, sectors and heads is normally printed on it. -<hr> +<a name="riscosusage"> +<h4>RISC OS specific Usage</h4> +</a> +This section details some of the code that is only relevant when ArcEm is running RISC OS, it does not apply for ARM Linux + +<a name="riscosusagehostfs"> +<h5>HostFS CVS</h5> +</a> +Make sure the files hostfs,ffa, hostfsfiler,ffa and arcemsupport,ffa are copied or 'sym-linked' from their support_modules sub directories into the 'extnrom' directory. +Create a directory called 'hostfs' in your executable directory, if it does not exist already. This directory is the root of the 'virtual harddisc'. (You can override this directory and put it in a different place with a commandline option). +When you boot up RISC OS 3.1x there should be a HostFS icon in the bottom left of the screen, clicking this will open up the host filing system and behaves in the same manner as a real Archimedes harddisc. +Simply copy files on your host into the hostfs directory and they will be available to RISC OS. +RISC OS filetypes are written to the host in the style of NFS mounts on Unix with a ,XXX on the end, eg a textfile would appear to be textfile,ffd. +Files copied into the hostfs directory are unlikely to have their RISC OS filetypes, use the RISC OS 'set type ' function in the filer. -<h2>Contents</h2> +Known Issues: +<ul> + <li>Does not work at all on Windows/RISC OS/GP2X builds of ArcEm.</li> + <li>Files on the host side are not allowed to have dollars in the filename, eg 'textfile$' would not work, but 'textfile' would be fine. + <li>Errors that occur when performing actions on the host filing system are often not well reported under RISC OS. +</ul> + +<a name="riscosusagescrollwheel"> +<h5>Mouse Scrollwheel support CVS</h5> +</a> +Make sure the file scrollwheel,ffa is copied or 'symlinked' from the 'support_modules/scrollwheel' directory into the 'extnrom' directory. +Spinning the scrollwheel up and down in RISC OS over windows that are vertically scrollable works in the way you'd expect. +Known Issues: <ul> - <li><a href="#changelog">ChangeLog</a> + <li>Only works in the Unix/X Windows, MS Windows and Amiga builds of ArcEm.</li> +</ul> - <li><a href="#install">Installation and Usage</a> +<a name="riscosusageextramodes"> +<h5>Additional Screen modes CVS</h5> +</a> +Make sure the file ArcemModes,ffa is copied or 'symlinked' from the 'support_modules/modes' directory into the 'extnrom' directory. + +Once the module is loaded these modes can be chosen in the normal RISC OS way, by typing: +<pre> +*wimpmode <number> +</pre> - <li><a href="#issues">Known Issues</a> +Here's a list of provided modes +<table border="1"> +<tr><th>Mode Number</th><th>X</th><th>Y</th><th>colours</th></tr> +<tr><td>32</td><td>800</td><td>600</td><td>256</td></tr> +<tr><td>100</td><td>1024</td><td>768</td><td>2</td></tr> +<tr><td>101</td><td>1024</td><td>768</td><td>4</td></tr> +<tr><td>102</td><td>1024</td><td>768</td><td>16</td></tr> +<tr><td>104</td><td>1280</td><td>1016</td><td>2</td></tr> +<tr><td>105</td><td>1280</td><td>1016</td><td>4</td></tr> +<tr><td>108</td><td>1152</td><td>864</td><td>2</td></tr> +<tr><td>109</td><td>1152</td><td>864</td><td>4</td></tr> +<tr><td>112</td><td>1400</td><td>520</td><td>16</td></tr> +<tr><td>120</td><td>1600</td><td>600</td><td>16</td></tr> +<tr><td>122</td><td>240</td><td>320</td><td>2</td></tr> +<tr><td>123</td><td>240</td><td>320</td><td>4</td></tr> +<tr><td>124</td><td>240</td><td>320</td><td>16</td></tr> +<tr><td>125</td><td>240</td><td>320</td><td>256</td></tr> +</table> - <li><a href="#faq">Quick FAQ</a> +Known Issues: +<ul> + <li>Modes larger than 800x600 will only work under Unix/X Windows and Amiga builds of ArcEm, however modes 32, 122, 123, 124 and 125 will work on all platforms.</li> + <li>Mode 122 is slightly buggy and looks very odd.</li> </ul> +<hr> +<a name="issues"> +<h3>Known Issues and bugs</h3> +</a> + +<a name="knownall"> +<h4>All platforms</h4> +</a> +There is no support for emulating 256K/512K/1MB RAM machines. +2MB RAM support incorrectly has a 32KB page size set, real machines have a 16KB page size, RISC OS copes with this and boots as normal. +All interlaced modes are displayed at their logical resolution, this means displays in some modes appear to be half the height they would appear on real monitors. + +<a name="knownX"> +<h4>Unix/X Windows</h4> +</a> +The display window doesn't resize on mode changes and remains at 800x600 (resolved in CVS). + +<a name="knownWIN32"> +<h4>Microsoft Windows</h4> +</a> +The version 1.00 binary is very unstable and crashes regularly. +The only menu items that do anything are Quit and About. +The mouse handling is very poor. +The Windows version has no diagnostics if anything goes wrong and will quite without warning (unless you rebuild with a console). +ARM Linux does not currently work in the Windows version of + the emulator. There is an unknown issue with harddrive access. + +<a name="knownOSX"> +<h4>Mac OS X</h4> +</a> +TODO -<hr> +<a name="knownRO"> +<h4>RISC OS</h4> +</a> +The RISC OS version is very slow. - +<a name="knownGP2X"> +<h4>GP2x</h4> +</a> +The GP2x version is very slow. + +<a name="knownAMIGA"> +<h4>Amiga</h4> +</a> +There is no error output when run from Workbench (it appears to do nothing +when ROM is not found). You can get the error output by +starting it from the Shell. +ArcEm always opens an 8-bit screen even if the emulation requests a lower +depth. +There is intentionally no keyboard remapping, keys are mapped based on +position. +It will only run full screen, not windowed. + +<hr> <a name="changelog"></a> <h3>ChangeLog:</h3> - - -<dl> - <dd> - 1.00 - 6th May 2002 - - <ul> - <li>New manual and new SourceForge page. Other documentation deprecated. - <li>Added project files for MS VC++, and fix warnings provoked by it. - <li>Further split of windowing/non-windowing functionality to - aid division of architecture-independent files. - <li>Windows version made independent from Cygwin. - <li>Windows support imported from eQRD version. Features brought - inline with other versions, including icon change, and - same format for choices file. - <li>Entirety of build warnings fixed under GCC, including those - that appeared from turning on harsh warning flags. - <li>General tidying. - <li>Makefile rearranged so that default Unix builds are more sensible. - </ul> - </dd> -</dl> - - -<dl> - <dd> - 0.60 - 30th September 2001 - - <ul> - <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls - <li> Split of the windowing aspects of the code, to allow independent - development. - <li> Some small speed ups. - <li> Source code tidying and warning fixes. - </ul> - </dd> -</dl> - - <dl> - <dd> - 0.50 - 4th September 1999 - </dd> + <dd> + 1.01 - 26th February 2006 + <ul> + <li>Added notes for GP2X port + </ul> + </dd> </dl> - - <dl> - <dd> - 0.40 - 27th July 1998 - </dd> + <dd> + 1.00 - 6th May 2002 + <ul> + <li>New manual and new SourceForge page. Other documentation deprecated. + <li>Added project files for MS VC++, and fix warnings provoked by it. + <li>Further split of windowing/non-windowing functionality to aid division + of architecture-independent files. + <li>Windows version made independent from Cygwin. + <li>Windows support imported from eQRD version. Features brought inline + with other versions, including icon change, and same format for choices + file. + <li>Entirety of build warnings fixed under GCC, including those that appeared + from turning on harsh warning flags. + <li>General tidying. + <li>Makefile rearranged so that default Unix builds are more sensible. + </ul> + </dd> </dl> - - <dl> - <dd>For details of older changes, see docs directory.</dd> + <dd> + 0.60 - 30th September 2001 + <ul> + <li> Support for running RISC OS, by Alex Macfarlane Smith and Peter Naulls + <li> Split of the windowing aspects of the code, to allow independent development. + <li> Some small speed ups. + <li> Source code tidying and warning fixes. + </ul> + </dd> </dl> - -<hr> - - - -<a name="install"></a> -<h3>Installation and Usage:</h3> - -The emulator is initially configured for one MFM hard disc. If you -wish to change that, you will need to edit the arcemrc file. - -To make a useful program, you will have to add to this the file "ROM" -containing an Operating System ROM to your OS set up below. You may also have a -drive image file named "HardImage1". This can either usefully be a RISC OS -filecore image or Linux ext2 image. Note that RISC OS will quite -happily boot without a harddrive. - - -<h4>Windows</h4> - <dl> - <dd> - Warning: ARM Linux does not currently work in the Windows version - of the emulator. There is an unknown issue with harddrive access. - - Unpack the archive to a location of your choice. You should have - the following files: - - <ul> - <li>index.html, maual.html - Documentation. - <li>ArcEm.exe - The emulator itself. - <li>hexcmos - CMOS settings for the emulator. - <li>arcemrc - Configuration file. - </ul> - - The emulator is started by running the executable. Unfortunately, - if anything goes wrong, the emulator will simply quit with little or no - warning. This will be improved in future versions. - - - - Pressing the + key on the keypad will toggle display of the Windows - mouse. - - - </dd> + <dd> + 0.50 - 4th September 1999 + </dd> </dl> - - -<h4>RISC OS</h4> - <dl> - <dd> - Please see the !Help file within the !ArcEm application for usage - information. - - </dd> + <dd> + 0.40 - 27th July 1998 + </dd> </dl> - - -<h4>Unix</h4> - <dl> - <dd> - Copy the arcemrc file to your home directory as .arcemrc. Usage is - otherwise similar to the Windows notes, but with some output on - a console. - - - As for the Windows version, pressing the + key on the keypad will - capture the mouse. - - - If your keyboard doesn't generate the KP_Add keysym, use xmodmap(1) - to alter its configuration. - - <pre> - #! /bin/sh - - xmodmap - <<\E - ! Make the Happy Hacker's two diamond keys into Mode_switch keys so I - ! can access KP_Add by pressing Shift-Diamond-equal. - - keycode 115 = Mode_switch - keycode 116 = Mode_switch - clear mod3 - add mod3 = Mode_switch - keycode equal = equal plus KP_Equal KP_Add - E - </pre> - </dd> + <dd>For details of older changes, see docs directory.</dd> </dl> - -<hr> - - - -<a name="issues"></a> -<h3>Known Issues:</h3> - -<ul> - <li>The only menu item that does anything in Windows is Quit. - <li>The mouse handling in Windows is rather poor. - <li>The Windows version has no diagnostics if anything goes wrong - (unless you rebuild with a console). - <li>The RISC OS version is very slow. - <li>The X-Windows version has no size handling - you have to resize - the window manually. -</ul> - -<hr> - - - -<a name="faq"></a> -<h3>Quick FAQ:</h3> - -Q. Can ArcEm run RISC OS 3.5 or later? - -A. No. ArcEm only emulates Archimedes-style hardware. RiscPC-style -hardware is required for RISC OS 3.5 or later. I have no plans -to add this, due to the time and research involved, but if someone else -wanted to, I would be happy to help. - -Q. Where can I get RISC OS 3.1 ROMs? - -A. From your A5000, A3020, etc. ROM images obtained from -any other source may be of questionable legality. This topic has been -discussed at length in various forums, and will not be repeated here. - -To save ROMs from your machine, use four 720K DOS formatted floppies (or -1.44MB if your machine supports it) and use the following commands for -each floppy: - -<pre> - *save :0.$.ROM1 3800000 3880000 - *save :0.$.ROM2 3880000 3900000 - *save :0.$.ROM3 3900000 3980000 - *save :0.$.ROM4 3980000 3a00000 -</pre> - -Finally, ArcEm requires that the ROM image be a single file (unlike -the other emulators), so concatenate the files using your favourite method -to produce the final file. - - - -Q. It doesn't do anything when it starts/feature X doesn't seem to work? - -A. Recompile it with debugging turned on, and find out why. -I don't have a better answer than that for the time being if you -can't make it work. - -<hr> - -<a href="mailto:peter@chocky.org">Peter Naulls</a> - </body> </html> - arcem-cvs_20070611-soundfix.patch: --- NEW FILE arcem-cvs_20070611-soundfix.patch --- --- arcem/X/sound.c.orig 2005-01-29 17:18:20.000000000 +0000 +++ arcem/X/sound.c 2007-08-08 17:53:12.000000000 +0100 @@ -111,7 +111,7 @@ int sound_init(void) { - if ((soundDevice = open("/dev/dsp", O_CREAT | O_WRONLY )) < 0) { + if ((soundDevice = open("/dev/dsp", O_WRONLY )) < 0) { fprintf(stderr, "Could not open audio device /dev/dsp\n"); return -1; } arcem-cvs_20070611-uichanges.patch: --- NEW FILE arcem-cvs_20070611-uichanges.patch --- --- arcem/X/ControlPane.c.orig 2006-03-23 13:46:03.000000000 +0000 +++ arcem/X/ControlPane.c 2007-06-11 21:22:01.000000000 +0100 @@ -16,12 +16,12 @@ #include <string.h> -#define CTRLPANEWIDTH 640 -#define CTRLPANEHEIGHT 100 +#define CTRLPANEWIDTH 600 +#define CTRLPANEHEIGHT 110 #define LEDHEIGHT 15 #define LEDWIDTH 15 -#define LEDTOPS 90 +#define LEDTOPS 100 #define DC DISPLAYCONTROL @@ -139,18 +139,22 @@ y += 2; y = TextCenteredH(state, "http://arcem.sf.net/", y, 0, CTRLPANEWIDTH); - y+=2; + y += 2; XDrawLine(HD.disp, HD.ControlPane, HD.ControlPaneGC, 0, y, CTRLPANEWIDTH-1, y); y += 2; - y = TextCenteredH(state, "Type `q' to quit.", y, 0, CTRLPANEWIDTH); + y = TextCenteredH(state, "Type q to quit.", y, 0, CTRLPANEWIDTH); - y += 2; - y = TextCenteredH(state, "Type `0', `1', `2', or `3' to " + y += 4; + y = TextCenteredH(state, "Type 0, 1, 2, or 3 to " "insert/eject floppy image.", y, 0, CTRLPANEWIDTH); - y+=2; + y += 4; + y = TextCenteredH(state, "Type + on keypad to capture/" + "uncapture the mouse.", y, 0, CTRLPANEWIDTH); + + y += 2; draw_keyboard_leds(KBD.Leds); draw_floppy_leds(~ioc.LatchA & 0xf); } /* ControlPane_Redraw */ --- NEW FILE arcem.sh --- #!/bin/sh # # Wrapper script for arcem which sets up a useful default environment for the # user and ensures files are saved in a sensible location (.arcem), if the auto # parameter is used. Otherwise it simply executes arcem verbatim passing it any # parameters received. arcembin='/usr/bin/arcem.bin'; moddir='/usr/share/arcem/modules'; kdialog='/usr/bin/kdialog'; zenity='/usr/bin/zenity'; xmessage='/usr/bin/xmessage'; msg="This appears to be the first time you've launched ArcEm, so a default\ environment has been configured for you. For ArcEm to fully function you\ require either a 'RISC OS 3.XX' rom, or a freely available 'ARM Linux' rom. The rom file should be called 'ROM' and installed into the following directory: $HOME/.arcem NOTE: By default ArcEm will be launched with the bundled 'ARM Linux' rom unless\ a rom is installed in the above location. Please consult the documentation for further information" # Check binary exists and is executable if [ ! -x $arcembin ] ; then echo "error: $arcembin missing or not executable" 1>&2 exit 1 fi # If we are not in auto mode, run arcem verbatim, passing any parameters if [ "$1" != "auto" ] ; then exec $arcembin "$@" fi # Check home exists and is a directory if [ ! -d $HOME ] ; then echo "error: $HOME is missing or not a directory" 1>&2 exit 2 fi # Check if ~/.arcem exists and is a directory. If not, make it and setup up # the subsequent default environment. If .arcem already exists then no changes # will be made. Notify the user of the default environment and the need for a # ROM if [ ! -d "$HOME/.arcem" ] ; then mkdir -p "$HOME/.arcem/extnrom" # Setup extention modules pushd "$HOME/.arcem/extnrom" > /dev/null ln -s "$moddir/"* . popd > /dev/null if [ -x $kdialog ] ; then $kdialog --title "First Run" --msgbox "$msg" elif [ -x $zenity ] ; then $zenity --title "First Run" --info --text "$msg" else echo -e $msg | fold -s --width=50 | $xmessage -center -file - fi # Output to console also echo -e $msg fi # Change to ~/.arcem to ensure files are loaded/saved there cd "$HOME/.arcem" # Launch arcem with the linux ROM if no user ROM if [ -f "$HOME/.arcem/ROM" ] ; then exec $arcembin --hostfsdir $HOME --memory 16M else exec $arcembin --hostfsdir $HOME --memory 16M --rom /usr/share/arcem/linuxrom/ROM fi --- NEW FILE arcem.spec --- # The source is retrieved from cvs: # cvs -z3 -d:pserver:anonymous@arcem.cvs.sourceforge.net:/cvsroot/arcem co -P arcem # The arcem directory should be compressed as the following: # arcem-cvs_YYYYMMDD.tar.bz2 %define cvsdate 20070611 Name: arcem Version: 1.10 Release: 3.cvs_%{cvsdate}%{?dist} Summary: Highly portable Acorn Archimedes emulator Group: Applications/Emulators License: GPLv2+ URL: http://arcem.sourceforge.net Source0: %{name}-cvs_%{cvsdate}.tar.bz2 Source1: http://arcem.sourceforge.net/linuxrom.zip Source2: arcem.sh Source3: README_arcem.dribble Patch0: arcem-cvs_20070611-improvemakefile.patch Patch1: arcem-cvs_20070611-uichanges.patch Patch2: arcem-cvs_20070611-manual.patch Patch3: arcem-cvs_20070611-soundfix.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: desktop-file-utils BuildRequires: ImageMagick BuildRequires: libX11-devel BuildRequires: libXext-devel Requires: hicolor-icon-theme Requires: xorg-x11-apps %description ArcEm is a Acorn Archimedes A400 hardware emulator that is highly portable. As it's a hardware emulator it's capable of running multiple operating systems including RISC OS 3.XX and ARM Linux. ArcEm requires either a RISC OS 3.XX or ARM Linux ROM to fully function. Only the Linux ROM can be legally included. %prep %setup -qn %{name} # Makefile is heavily patched because it's largely broken in many ways %patch0 -p1 %patch1 -p1 %patch2 -p1 %patch3 -p1 unzip -qq %{SOURCE1} %build # Sound support seems stable but experimental, but largely doesn't work on PPC %ifarch %{ix86} x86_64 make %{?_smp_mflags} RPMFLAGS="%{optflags}" SOUND_SUPPORT=yes %else make %{?_smp_mflags} RPMFLAGS="%{optflags}" HOST_BIGENDIAN=yes %endif #Build icon image convert win/arc.ico %{name}.png # Build desktop icon cat >%{name}.desktop <<EOF [Desktop Entry] Encoding=UTF-8 Name=Arcem GenericName=Acorn Archimedes Emulator Comment=%{summary} Exec=%{name} auto Icon=%{name} Terminal=false Type=Application StartupNotify=false Categories=Game;Emulator; EOF %install rm -rf %{buildroot} make install INSTALL_DIR=%{buildroot} mkdir -p %{buildroot}%{_datadir}/%{name}/{modules,linuxrom} mkdir -p %{buildroot}%{_datadir}/icons/hicolor/32x32/apps install -pm0644 support_modules/*/*,ffa %{buildroot}%{_datadir}/%{name}/modules install -pm0644 ROM.linux %{buildroot}%{_datadir}/%{name}/linuxrom/ROM install -pm0755 %{SOURCE2} %{buildroot}%{_bindir}/%{name} install -pm0644 %{name}-0.png %{buildroot}%{_datadir}/icons/hicolor/32x32/apps/%{name}.png install -pm0644 %{SOURCE3} . desktop-file-install --vendor dribble \ --dir %{buildroot}%{_datadir}/applications \ %{name}.desktop %clean rm -rf %{buildroot} %post touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %postun touch --no-create %{_datadir}/icons/hicolor if [ -x %{_bindir}/gtk-update-icon-cache ]; then %{_bindir}/gtk-update-icon-cache --quiet %{_datadir}/icons/hicolor || : fi %files %defattr(-,root,root,-) %{_bindir}/%{name} %{_bindir}/%{name}.bin %{_datadir}/%{name} %{_datadir}/applications/dribble-%{name}.desktop %{_datadir}/icons/hicolor/32x32/apps/%{name}.png %doc docs/5thColumn.txt docs/COPYING index.html manual.html README_arcem.dribble %changelog * Wed Dec 12 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-3.cvs_20070611 - Minor spec changes for devel * Wed Aug 08 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-2.cvs_20070611 - Added patch to fix sound.c compilation on newer GCCs * Tue Aug 07 2007 Ian Chapman <packages[AT]amiga-hardware.com> 1.10-1.cvs_20070611 - Minor cleanups to the SPEC - Updated license field due to new guidelines * Mon Jun 11 2007 Ian Chapman <packages(a)amiga-hardware.com> 1.10-0.cvs_20070611 - Initial Release Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/arcem/devel/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 31 May 2008 14:02:00 -0000 1.1 +++ .cvsignore 19 Jul 2008 18:35:05 -0000 1.2 @@ -0,0 +1,2 @@ +arcem-cvs_20070611.tar.bz2 +linuxrom.zip Index: sources =================================================================== RCS file: /cvs/free/rpms/arcem/devel/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 31 May 2008 14:02:00 -0000 1.1 +++ sources 19 Jul 2008 18:35:05 -0000 1.2 @@ -0,0 +1,2 @@ +6f0ad6c1f9fd80887e26192736e085b6 arcem-cvs_20070611.tar.bz2 +a8b171aee91fda454a625b3dcfda7bdc linuxrom.zip

16 years, 4 months

1
0
0 / 0

rpms/fceultra/F-8 fceultra-0.98.13-cheatdir.patch, NONE, 1.1 fceultra-0.98.13-configure_fix_non_x86.patch, NONE, 1.1 fceultra-0.98.13-man.patch, NONE, 1.1 fceultra.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/fceultra/F-8 In directory se02.es.rpmfusion.net:/tmp/cvs-serv29299/F-8 Modified Files: .cvsignore sources Added Files: fceultra-0.98.13-cheatdir.patch fceultra-0.98.13-configure_fix_non_x86.patch fceultra-0.98.13-man.patch fceultra.spec Log Message: First import fceultra-0.98.13-cheatdir.patch: --- NEW FILE fceultra-0.98.13-cheatdir.patch --- --- src/drivers/pc/main.c 2004-08-17 23:08:44.000000000 +0100 +++ src/drivers/pc/main.c 2006-05-03 15:21:21.000000000 +0100 @@ -163,7 +163,7 @@ } #else mkdir(DrBaseDirectory,S_IRWXU); - for(x=0;x<5;x++) + for(x=0;x<6;x++) { sprintf(tdir,"%s"PSS"%s",DrBaseDirectory,subs[x]); mkdir(tdir,S_IRWXU); fceultra-0.98.13-configure_fix_non_x86.patch: --- NEW FILE fceultra-0.98.13-configure_fix_non_x86.patch --- --- fceu/configure.ac~ 2006-10-22 12:49:18.000000000 +0200 +++ fceu/configure.ac 2006-10-22 12:49:18.000000000 +0200 @@ -117,6 +117,8 @@ if expr match "$target_cpu" 'i.86' > /dev/null; then AC_DEFINE([C80x86]) AM_CONDITIONAL(C80x86, true) +else + AM_CONDITIONAL(C80x86, false) fi AC_C_BIGENDIAN([], [AC_DEFINE([LSB_FIRST])]) --- fceu/configure~ 2006-10-22 12:50:01.000000000 +0200 +++ fceu/configure 2006-10-22 12:50:01.000000000 +0200 @@ -5145,6 +5145,16 @@ C80x86_FALSE= fi +else + +if false; then + C80x86_TRUE= + C80x86_FALSE='#' +else + C80x86_TRUE='#' + C80x86_FALSE= +fi + fi echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 fceultra-0.98.13-man.patch: --- NEW FILE fceultra-0.98.13-man.patch --- --- fceu-0.98.12.orig/Documentation/fceu-sdl.6 +++ fceu-0.98.12/Documentation/fceu-sdl.6 @@ -2,7 +2,7 @@ .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) -.TH FCEU-SDL 6 "March 27, 2003" +.TH FCEU 6 "October 10, 2004" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: @@ -16,35 +16,30 @@ .\" .sp <n> insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME -fceu-sdl \- An emulator for the original (8-bit) Nintendo game console. +fceu \- An emulator for the original (8\-bit) Nintendo game console. .SH SYNOPSIS -.B fceu-sdl +.B fceu .RI [ options ] "filename" .SH DESCRIPTION .B FCE Ultra -is an emulator for the original (8-bit) Nintendo Entertainment System (NES). +is an emulator for the original (8\-bit) Nintendo Entertainment System (NES). It has a robust color palette rendering engine that is fully customizable, along with excellent sound and joystick support, and even includes TCP/IP based -network playing for head-to-head gaming with your friends! -.PP -The emulator is available in two versions for Linux (there are also versions -for DOS and Windows): an SDL-based version, and one based on SVGALIB. The two -versions are essentially the same \-\- use the SVGALIB version for the Linux -console, and the SDL version for playing in X. +network playing for head\-to\-head gaming with your friends! .SH OPTIONS -These are some of the more frequently used options in FCE Ultra SDL. Run -fceu-sdl without any options for a larger list, or see the README for the full +These are some of the more frequently used options in FCE Ultra. Run +fceu without any options for a larger list, or see the README for the full list. .TP .B \-fs {0|1} -Toggle full-screen mode. +Toggle full\-screen mode. .TP .B \-xres <res> -Set the Horizontal resolution for full-screen mode. +Set the Horizontal resolution for full\-screen mode. .TP .B \-yres <res> -Set the Vertical resolution for full-screen mode. +Set the Vertical resolution for full\-screen mode. .TP .B \-gg Enable Game Genie emulation support. @@ -69,7 +64,7 @@ .SH KEYBOARD COMMANDS .B FCE Ultra has a number of commands available within the emulator. -It also includes default keyboard bindings when emulating game pads or power pads. +It also provides keyboard bindings for emulating gamepads or powerpads. .SS Gamepad Keyboard Bindings .TS center box; @@ -89,7 +84,7 @@ Activate cheat interface. .TP 15 .BI <F4> -Toggle full-screen mode. +Toggle full\-screen mode. .TP 15 .BI <F5> Save game state into current slot (set using number keys). @@ -110,14 +105,9 @@ Quit .B FCE Ultra. .SH SEE ALSO -.BR fceu-svga (6) -.TP -.I /usr/share/doc/fceu-doc/readme-linux.txt.gz +.I /usr/share/doc/fceu/fceultra.html The -.B FCE Ultra README -for linux, available from the -.I fceu-doc -Debian package. +.B FCE Ultra README file. .TP .I http://fceultra.sourceforge.net/ The --- NEW FILE fceultra.spec --- Summary: A portable NES/Famicom emulator Name: fceultra Version: 0.98.13 Release: 0.5.pre%{?dist} License: GPLv2+ Group: Applications/Emulators URL: http://fceultra.sourceforge.net/ Source: http://dl.sf.net/sourceforge/%{name}/fceu-%{version}-pre.src.tar.bz2 Patch0: fceultra-0.98.13-man.patch Patch1: fceultra-0.98.13-cheatdir.patch Patch2: fceultra-0.98.13-configure_fix_non_x86.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: SDL-devel >= 1.2.0 BuildRequires: libGLU-devel BuildRequires: zlib-devel BuildRequires: automake16 %description FCE Ultra is a portable NES/Famicom emulator based on Bero's original FCE source code. Large portions of it have been rewritten, resulting in a much stabler and very compatible emulator. %prep %setup -q -n fceu %patch0 -p1 %patch1 -p0 %patch2 -p1 perl -pi -e's/-mcpu=i686/\$(RPM_OPT_FLAGS)/' Makefile* chmod 644 src/drivers/sexyal/convert.inc mv Documentation/fceu-sdl.6 Documentation/fceultra.6 %build %configure --with-opengl make %{?_smp_mflags} %install rm -rf %{buildroot} install -d %{buildroot}%{_bindir} install -m 755 src/fceu %{buildroot}%{_bindir}/fceultra install -d %{buildroot}%_mandir/man6 install -m 644 Documentation/fceultra.6 %{buildroot}%{_mandir}/man6 %clean rm -rf %{buildroot} %files %defattr(-,root,root) %doc AUTHORS COPYING TODO %doc Documentation/*.html Documentation/*.txt %{_bindir}/fceultra %{_mandir}/man6/fceultra.6* %changelog * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.5.pre - Changed license due to new guidelines. - Removed %%{?dist} tag from changelog. * Thu Mar 01 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.4.pre - Renamed binary from fceu to fceultra to avoid conflicts (Dribble #77). * Tue Oct 24 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.3.pre - Added missing libGLU-devel to BuildRequires. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.2.pre - Fixed Source tag URL. - Restored name to fceultra upon requests from Dribble. - Added a patch from Hans to fix compile on non x86. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.1.pre - First release for Dribble. - Changed name to fceu to match upstream tarball name. - Fixed Release to meet Fedora guidelines. - Fixed License tag. - Fixed Group tag. - Updated URL and Source tags. - Fixed Buildroot to meet Fedora guidelines. - Deleted not required dependences in BuildRequires. - Fixed src/drivers/sexyal/convert.inc file permissions. - No longer using old fceu-sdl name for exec file. - Added patch from Debian to fix man entry. - Added patch to save cheats to file (Gentoo #109359). - Added %%{?_smp_mflags} to make invocation to speed up SMP builds. - Avoided including man in %%doc. * Fri Feb 18 2005 Winston Chang <winston(a)stdout.org> - Updated to 0.98.13. * Wed Dec 3 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Updated to 0.97.5. * Fri Jun 13 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Initial build. Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/fceultra/F-8/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 11:43:43 -0000 1.1 +++ .cvsignore 19 Jul 2008 18:01:04 -0000 1.2 @@ -0,0 +1 @@ +fceu-0.98.13-pre.src.tar.bz2 Index: sources =================================================================== RCS file: /cvs/free/rpms/fceultra/F-8/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 11:43:43 -0000 1.1 +++ sources 19 Jul 2008 18:01:04 -0000 1.2 @@ -0,0 +1 @@ +1977214a15a341a4fd8bad14eda76866 fceu-0.98.13-pre.src.tar.bz2

16 years, 4 months

1
0
0 / 0

rpms/fceultra/F-9 fceultra-0.98.13-cheatdir.patch, NONE, 1.1 fceultra-0.98.13-configure_fix_non_x86.patch, NONE, 1.1 fceultra-0.98.13-man.patch, NONE, 1.1 fceultra.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/fceultra/F-9 In directory se02.es.rpmfusion.net:/tmp/cvs-serv29048/F-9 Modified Files: .cvsignore sources Added Files: fceultra-0.98.13-cheatdir.patch fceultra-0.98.13-configure_fix_non_x86.patch fceultra-0.98.13-man.patch fceultra.spec Log Message: First import fceultra-0.98.13-cheatdir.patch: --- NEW FILE fceultra-0.98.13-cheatdir.patch --- --- src/drivers/pc/main.c 2004-08-17 23:08:44.000000000 +0100 +++ src/drivers/pc/main.c 2006-05-03 15:21:21.000000000 +0100 @@ -163,7 +163,7 @@ } #else mkdir(DrBaseDirectory,S_IRWXU); - for(x=0;x<5;x++) + for(x=0;x<6;x++) { sprintf(tdir,"%s"PSS"%s",DrBaseDirectory,subs[x]); mkdir(tdir,S_IRWXU); fceultra-0.98.13-configure_fix_non_x86.patch: --- NEW FILE fceultra-0.98.13-configure_fix_non_x86.patch --- --- fceu/configure.ac~ 2006-10-22 12:49:18.000000000 +0200 +++ fceu/configure.ac 2006-10-22 12:49:18.000000000 +0200 @@ -117,6 +117,8 @@ if expr match "$target_cpu" 'i.86' > /dev/null; then AC_DEFINE([C80x86]) AM_CONDITIONAL(C80x86, true) +else + AM_CONDITIONAL(C80x86, false) fi AC_C_BIGENDIAN([], [AC_DEFINE([LSB_FIRST])]) --- fceu/configure~ 2006-10-22 12:50:01.000000000 +0200 +++ fceu/configure 2006-10-22 12:50:01.000000000 +0200 @@ -5145,6 +5145,16 @@ C80x86_FALSE= fi +else + +if false; then + C80x86_TRUE= + C80x86_FALSE='#' +else + C80x86_TRUE='#' + C80x86_FALSE= +fi + fi echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 fceultra-0.98.13-man.patch: --- NEW FILE fceultra-0.98.13-man.patch --- --- fceu-0.98.12.orig/Documentation/fceu-sdl.6 +++ fceu-0.98.12/Documentation/fceu-sdl.6 @@ -2,7 +2,7 @@ .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) -.TH FCEU-SDL 6 "March 27, 2003" +.TH FCEU 6 "October 10, 2004" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: @@ -16,35 +16,30 @@ .\" .sp <n> insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME -fceu-sdl \- An emulator for the original (8-bit) Nintendo game console. +fceu \- An emulator for the original (8\-bit) Nintendo game console. .SH SYNOPSIS -.B fceu-sdl +.B fceu .RI [ options ] "filename" .SH DESCRIPTION .B FCE Ultra -is an emulator for the original (8-bit) Nintendo Entertainment System (NES). +is an emulator for the original (8\-bit) Nintendo Entertainment System (NES). It has a robust color palette rendering engine that is fully customizable, along with excellent sound and joystick support, and even includes TCP/IP based -network playing for head-to-head gaming with your friends! -.PP -The emulator is available in two versions for Linux (there are also versions -for DOS and Windows): an SDL-based version, and one based on SVGALIB. The two -versions are essentially the same \-\- use the SVGALIB version for the Linux -console, and the SDL version for playing in X. +network playing for head\-to\-head gaming with your friends! .SH OPTIONS -These are some of the more frequently used options in FCE Ultra SDL. Run -fceu-sdl without any options for a larger list, or see the README for the full +These are some of the more frequently used options in FCE Ultra. Run +fceu without any options for a larger list, or see the README for the full list. .TP .B \-fs {0|1} -Toggle full-screen mode. +Toggle full\-screen mode. .TP .B \-xres <res> -Set the Horizontal resolution for full-screen mode. +Set the Horizontal resolution for full\-screen mode. .TP .B \-yres <res> -Set the Vertical resolution for full-screen mode. +Set the Vertical resolution for full\-screen mode. .TP .B \-gg Enable Game Genie emulation support. @@ -69,7 +64,7 @@ .SH KEYBOARD COMMANDS .B FCE Ultra has a number of commands available within the emulator. -It also includes default keyboard bindings when emulating game pads or power pads. +It also provides keyboard bindings for emulating gamepads or powerpads. .SS Gamepad Keyboard Bindings .TS center box; @@ -89,7 +84,7 @@ Activate cheat interface. .TP 15 .BI <F4> -Toggle full-screen mode. +Toggle full\-screen mode. .TP 15 .BI <F5> Save game state into current slot (set using number keys). @@ -110,14 +105,9 @@ Quit .B FCE Ultra. .SH SEE ALSO -.BR fceu-svga (6) -.TP -.I /usr/share/doc/fceu-doc/readme-linux.txt.gz +.I /usr/share/doc/fceu/fceultra.html The -.B FCE Ultra README -for linux, available from the -.I fceu-doc -Debian package. +.B FCE Ultra README file. .TP .I http://fceultra.sourceforge.net/ The --- NEW FILE fceultra.spec --- Summary: A portable NES/Famicom emulator Name: fceultra Version: 0.98.13 Release: 0.5.pre%{?dist} License: GPLv2+ Group: Applications/Emulators URL: http://fceultra.sourceforge.net/ Source: http://dl.sf.net/sourceforge/%{name}/fceu-%{version}-pre.src.tar.bz2 Patch0: fceultra-0.98.13-man.patch Patch1: fceultra-0.98.13-cheatdir.patch Patch2: fceultra-0.98.13-configure_fix_non_x86.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: SDL-devel >= 1.2.0 BuildRequires: libGLU-devel BuildRequires: zlib-devel BuildRequires: automake16 %description FCE Ultra is a portable NES/Famicom emulator based on Bero's original FCE source code. Large portions of it have been rewritten, resulting in a much stabler and very compatible emulator. %prep %setup -q -n fceu %patch0 -p1 %patch1 -p0 %patch2 -p1 perl -pi -e's/-mcpu=i686/\$(RPM_OPT_FLAGS)/' Makefile* chmod 644 src/drivers/sexyal/convert.inc mv Documentation/fceu-sdl.6 Documentation/fceultra.6 %build %configure --with-opengl make %{?_smp_mflags} %install rm -rf %{buildroot} install -d %{buildroot}%{_bindir} install -m 755 src/fceu %{buildroot}%{_bindir}/fceultra install -d %{buildroot}%_mandir/man6 install -m 644 Documentation/fceultra.6 %{buildroot}%{_mandir}/man6 %clean rm -rf %{buildroot} %files %defattr(-,root,root) %doc AUTHORS COPYING TODO %doc Documentation/*.html Documentation/*.txt %{_bindir}/fceultra %{_mandir}/man6/fceultra.6* %changelog * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.5.pre - Changed license due to new guidelines. - Removed %%{?dist} tag from changelog. * Thu Mar 01 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.4.pre - Renamed binary from fceu to fceultra to avoid conflicts (Dribble #77). * Tue Oct 24 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.3.pre - Added missing libGLU-devel to BuildRequires. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.2.pre - Fixed Source tag URL. - Restored name to fceultra upon requests from Dribble. - Added a patch from Hans to fix compile on non x86. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.1.pre - First release for Dribble. - Changed name to fceu to match upstream tarball name. - Fixed Release to meet Fedora guidelines. - Fixed License tag. - Fixed Group tag. - Updated URL and Source tags. - Fixed Buildroot to meet Fedora guidelines. - Deleted not required dependences in BuildRequires. - Fixed src/drivers/sexyal/convert.inc file permissions. - No longer using old fceu-sdl name for exec file. - Added patch from Debian to fix man entry. - Added patch to save cheats to file (Gentoo #109359). - Added %%{?_smp_mflags} to make invocation to speed up SMP builds. - Avoided including man in %%doc. * Fri Feb 18 2005 Winston Chang <winston(a)stdout.org> - Updated to 0.98.13. * Wed Dec 3 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Updated to 0.97.5. * Fri Jun 13 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Initial build. Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/fceultra/F-9/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 11:43:43 -0000 1.1 +++ .cvsignore 19 Jul 2008 18:00:10 -0000 1.2 @@ -0,0 +1 @@ +fceu-0.98.13-pre.src.tar.bz2 Index: sources =================================================================== RCS file: /cvs/free/rpms/fceultra/F-9/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 11:43:43 -0000 1.1 +++ sources 19 Jul 2008 18:00:10 -0000 1.2 @@ -0,0 +1 @@ +1977214a15a341a4fd8bad14eda76866 fceu-0.98.13-pre.src.tar.bz2

16 years, 4 months

1
0
0 / 0

rpms/fceultra/devel fceultra-0.98.13-cheatdir.patch, NONE, 1.1 fceultra-0.98.13-configure_fix_non_x86.patch, NONE, 1.1 fceultra-0.98.13-man.patch, NONE, 1.1 fceultra.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/fceultra/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv28793/devel Modified Files: .cvsignore sources Added Files: fceultra-0.98.13-cheatdir.patch fceultra-0.98.13-configure_fix_non_x86.patch fceultra-0.98.13-man.patch fceultra.spec Log Message: First import fceultra-0.98.13-cheatdir.patch: --- NEW FILE fceultra-0.98.13-cheatdir.patch --- --- src/drivers/pc/main.c 2004-08-17 23:08:44.000000000 +0100 +++ src/drivers/pc/main.c 2006-05-03 15:21:21.000000000 +0100 @@ -163,7 +163,7 @@ } #else mkdir(DrBaseDirectory,S_IRWXU); - for(x=0;x<5;x++) + for(x=0;x<6;x++) { sprintf(tdir,"%s"PSS"%s",DrBaseDirectory,subs[x]); mkdir(tdir,S_IRWXU); fceultra-0.98.13-configure_fix_non_x86.patch: --- NEW FILE fceultra-0.98.13-configure_fix_non_x86.patch --- --- fceu/configure.ac~ 2006-10-22 12:49:18.000000000 +0200 +++ fceu/configure.ac 2006-10-22 12:49:18.000000000 +0200 @@ -117,6 +117,8 @@ if expr match "$target_cpu" 'i.86' > /dev/null; then AC_DEFINE([C80x86]) AM_CONDITIONAL(C80x86, true) +else + AM_CONDITIONAL(C80x86, false) fi AC_C_BIGENDIAN([], [AC_DEFINE([LSB_FIRST])]) --- fceu/configure~ 2006-10-22 12:50:01.000000000 +0200 +++ fceu/configure 2006-10-22 12:50:01.000000000 +0200 @@ -5145,6 +5145,16 @@ C80x86_FALSE= fi +else + +if false; then + C80x86_TRUE= + C80x86_FALSE='#' +else + C80x86_TRUE='#' + C80x86_FALSE= +fi + fi echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 fceultra-0.98.13-man.patch: --- NEW FILE fceultra-0.98.13-man.patch --- --- fceu-0.98.12.orig/Documentation/fceu-sdl.6 +++ fceu-0.98.12/Documentation/fceu-sdl.6 @@ -2,7 +2,7 @@ .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) -.TH FCEU-SDL 6 "March 27, 2003" +.TH FCEU 6 "October 10, 2004" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: @@ -16,35 +16,30 @@ .\" .sp <n> insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME -fceu-sdl \- An emulator for the original (8-bit) Nintendo game console. +fceu \- An emulator for the original (8\-bit) Nintendo game console. .SH SYNOPSIS -.B fceu-sdl +.B fceu .RI [ options ] "filename" .SH DESCRIPTION .B FCE Ultra -is an emulator for the original (8-bit) Nintendo Entertainment System (NES). +is an emulator for the original (8\-bit) Nintendo Entertainment System (NES). It has a robust color palette rendering engine that is fully customizable, along with excellent sound and joystick support, and even includes TCP/IP based -network playing for head-to-head gaming with your friends! -.PP -The emulator is available in two versions for Linux (there are also versions -for DOS and Windows): an SDL-based version, and one based on SVGALIB. The two -versions are essentially the same \-\- use the SVGALIB version for the Linux -console, and the SDL version for playing in X. +network playing for head\-to\-head gaming with your friends! .SH OPTIONS -These are some of the more frequently used options in FCE Ultra SDL. Run -fceu-sdl without any options for a larger list, or see the README for the full +These are some of the more frequently used options in FCE Ultra. Run +fceu without any options for a larger list, or see the README for the full list. .TP .B \-fs {0|1} -Toggle full-screen mode. +Toggle full\-screen mode. .TP .B \-xres <res> -Set the Horizontal resolution for full-screen mode. +Set the Horizontal resolution for full\-screen mode. .TP .B \-yres <res> -Set the Vertical resolution for full-screen mode. +Set the Vertical resolution for full\-screen mode. .TP .B \-gg Enable Game Genie emulation support. @@ -69,7 +64,7 @@ .SH KEYBOARD COMMANDS .B FCE Ultra has a number of commands available within the emulator. -It also includes default keyboard bindings when emulating game pads or power pads. +It also provides keyboard bindings for emulating gamepads or powerpads. .SS Gamepad Keyboard Bindings .TS center box; @@ -89,7 +84,7 @@ Activate cheat interface. .TP 15 .BI <F4> -Toggle full-screen mode. +Toggle full\-screen mode. .TP 15 .BI <F5> Save game state into current slot (set using number keys). @@ -110,14 +105,9 @@ Quit .B FCE Ultra. .SH SEE ALSO -.BR fceu-svga (6) -.TP -.I /usr/share/doc/fceu-doc/readme-linux.txt.gz +.I /usr/share/doc/fceu/fceultra.html The -.B FCE Ultra README -for linux, available from the -.I fceu-doc -Debian package. +.B FCE Ultra README file. .TP .I http://fceultra.sourceforge.net/ The --- NEW FILE fceultra.spec --- Summary: A portable NES/Famicom emulator Name: fceultra Version: 0.98.13 Release: 0.5.pre%{?dist} License: GPLv2+ Group: Applications/Emulators URL: http://fceultra.sourceforge.net/ Source: http://dl.sf.net/sourceforge/%{name}/fceu-%{version}-pre.src.tar.bz2 Patch0: fceultra-0.98.13-man.patch Patch1: fceultra-0.98.13-cheatdir.patch Patch2: fceultra-0.98.13-configure_fix_non_x86.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: SDL-devel >= 1.2.0 BuildRequires: libGLU-devel BuildRequires: zlib-devel BuildRequires: automake16 %description FCE Ultra is a portable NES/Famicom emulator based on Bero's original FCE source code. Large portions of it have been rewritten, resulting in a much stabler and very compatible emulator. %prep %setup -q -n fceu %patch0 -p1 %patch1 -p0 %patch2 -p1 perl -pi -e's/-mcpu=i686/\$(RPM_OPT_FLAGS)/' Makefile* chmod 644 src/drivers/sexyal/convert.inc mv Documentation/fceu-sdl.6 Documentation/fceultra.6 %build %configure --with-opengl make %{?_smp_mflags} %install rm -rf %{buildroot} install -d %{buildroot}%{_bindir} install -m 755 src/fceu %{buildroot}%{_bindir}/fceultra install -d %{buildroot}%_mandir/man6 install -m 644 Documentation/fceultra.6 %{buildroot}%{_mandir}/man6 %clean rm -rf %{buildroot} %files %defattr(-,root,root) %doc AUTHORS COPYING TODO %doc Documentation/*.html Documentation/*.txt %{_bindir}/fceultra %{_mandir}/man6/fceultra.6* %changelog * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.5.pre - Changed license due to new guidelines. - Removed %%{?dist} tag from changelog. * Thu Mar 01 2007 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.4.pre - Renamed binary from fceu to fceultra to avoid conflicts (Dribble #77). * Tue Oct 24 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.3.pre - Added missing libGLU-devel to BuildRequires. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.2.pre - Fixed Source tag URL. - Restored name to fceultra upon requests from Dribble. - Added a patch from Hans to fix compile on non x86. * Sat Oct 21 2006 Andrea Musuruane <musuruan(a)gmail.com> 0.98.13-0.1.pre - First release for Dribble. - Changed name to fceu to match upstream tarball name. - Fixed Release to meet Fedora guidelines. - Fixed License tag. - Fixed Group tag. - Updated URL and Source tags. - Fixed Buildroot to meet Fedora guidelines. - Deleted not required dependences in BuildRequires. - Fixed src/drivers/sexyal/convert.inc file permissions. - No longer using old fceu-sdl name for exec file. - Added patch from Debian to fix man entry. - Added patch to save cheats to file (Gentoo #109359). - Added %%{?_smp_mflags} to make invocation to speed up SMP builds. - Avoided including man in %%doc. * Fri Feb 18 2005 Winston Chang <winston(a)stdout.org> - Updated to 0.98.13. * Wed Dec 3 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Updated to 0.97.5. * Fri Jun 13 2003 Axel Thimm <Axel.Thimm(a)physik.fu-berlin.de> - Initial build. Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/fceultra/devel/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 11:43:43 -0000 1.1 +++ .cvsignore 19 Jul 2008 17:59:23 -0000 1.2 @@ -0,0 +1 @@ +fceu-0.98.13-pre.src.tar.bz2 Index: sources =================================================================== RCS file: /cvs/free/rpms/fceultra/devel/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 11:43:43 -0000 1.1 +++ sources 19 Jul 2008 17:59:23 -0000 1.2 @@ -0,0 +1 @@ +1977214a15a341a4fd8bad14eda76866 fceu-0.98.13-pre.src.tar.bz2

16 years, 4 months

1
0
0 / 0

rpms/scottfree/F-8 scottfree-1.14.diff, NONE, 1.1 scottfree.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/scottfree/F-8 In directory se02.es.rpmfusion.net:/tmp/cvs-serv27542/F-8 Modified Files: .cvsignore sources Added Files: scottfree-1.14.diff scottfree.spec Log Message: First import scottfree-1.14.diff: --- NEW FILE scottfree-1.14.diff --- --- scottfree-1.14.orig/Makefile +++ scottfree-1.14/Makefile @@ -4,11 +4,16 @@ CC = gcc # # -all : ScottCurses +all : scottfree ScottCurses.o: ScottCurses.c Scott.h -ScottCurses: ScottCurses.o - $(CC) ScottCurses.o -o ScottCurses -lcurses -ltermcap +scottfree: ScottCurses.o + $(CC) ScottCurses.o -o scottfree -lcurses +install: + mkdir -p $(DESTDIR)/usr/bin + install -m 755 scottfree $(DESTDIR)/usr/bin +clean: + rm -f ScottCurses.o scottfree --- scottfree-1.14.orig/ScottCurses.c +++ scottfree-1.14/ScottCurses.c @@ -20,6 +20,8 @@ #include <curses.h> #include <stdarg.h> #include <signal.h> +#include <unistd.h> +#include <sys/types.h> #include "Scott.h" --- NEW FILE scottfree.spec --- Summary: Interpreter for Scott Adams format text adventure games Name: scottfree Version: 1.14 Release: 3%{?dist} License: GPLv2+ Group: Amusements/Games Source: ftp://ftp.gmd.de/if-archive/scott-adams/ScottFree.tar.gz Patch: scottfree-1.14.diff BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: ncurses-devel %description ScottFree is an interpreter for Scott-Adams-format text adventure games (remember those?). It reads and executes TRS-80 format data files. Most Adventure International Games are distributed as shareware and are available from ftp://ftp.gmd.de/if-archive/scott-adams/ %prep %setup -q -c %patch -p1 chmod 644 * %build make %{?_smp_mflags} %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root) %{_bindir}/scottfree %doc README Definition %changelog * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 1.14-3 - changed license due to new guidelines - removed %%{?dist} tag from changelog * Mon Oct 09 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-2 - changed patch name to lowercase to match RPM name - changed group to "Amusements/Games" - added %%{?_smp_mflags} to make invocation to speed up SMP builds * Sat Oct 07 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-1 - initial package based on the old RH 5.2 package and a patch from Debian Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/scottfree/F-8/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 12:34:14 -0000 1.1 +++ .cvsignore 19 Jul 2008 17:40:52 -0000 1.2 @@ -0,0 +1 @@ +ScottFree.tar.gz Index: sources =================================================================== RCS file: /cvs/free/rpms/scottfree/F-8/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 12:34:14 -0000 1.1 +++ sources 19 Jul 2008 17:40:52 -0000 1.2 @@ -0,0 +1 @@ +d7802a1fee4dc81d35eca76b75cac8eb ScottFree.tar.gz

16 years, 4 months

1
0
0 / 0

rpms/scottfree/F-9 scottfree-1.14.diff, NONE, 1.1 scottfree.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/scottfree/F-9 In directory se02.es.rpmfusion.net:/tmp/cvs-serv27331/F-9 Modified Files: .cvsignore sources Added Files: scottfree-1.14.diff scottfree.spec Log Message: First import scottfree-1.14.diff: --- NEW FILE scottfree-1.14.diff --- --- scottfree-1.14.orig/Makefile +++ scottfree-1.14/Makefile @@ -4,11 +4,16 @@ CC = gcc # # -all : ScottCurses +all : scottfree ScottCurses.o: ScottCurses.c Scott.h -ScottCurses: ScottCurses.o - $(CC) ScottCurses.o -o ScottCurses -lcurses -ltermcap +scottfree: ScottCurses.o + $(CC) ScottCurses.o -o scottfree -lcurses +install: + mkdir -p $(DESTDIR)/usr/bin + install -m 755 scottfree $(DESTDIR)/usr/bin +clean: + rm -f ScottCurses.o scottfree --- scottfree-1.14.orig/ScottCurses.c +++ scottfree-1.14/ScottCurses.c @@ -20,6 +20,8 @@ #include <curses.h> #include <stdarg.h> #include <signal.h> +#include <unistd.h> +#include <sys/types.h> #include "Scott.h" --- NEW FILE scottfree.spec --- Summary: Interpreter for Scott Adams format text adventure games Name: scottfree Version: 1.14 Release: 3%{?dist} License: GPLv2+ Group: Amusements/Games Source: ftp://ftp.gmd.de/if-archive/scott-adams/ScottFree.tar.gz Patch: scottfree-1.14.diff BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: ncurses-devel %description ScottFree is an interpreter for Scott-Adams-format text adventure games (remember those?). It reads and executes TRS-80 format data files. Most Adventure International Games are distributed as shareware and are available from ftp://ftp.gmd.de/if-archive/scott-adams/ %prep %setup -q -c %patch -p1 chmod 644 * %build make %{?_smp_mflags} %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root) %{_bindir}/scottfree %doc README Definition %changelog * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 1.14-3 - changed license due to new guidelines - removed %%{?dist} tag from changelog * Mon Oct 09 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-2 - changed patch name to lowercase to match RPM name - changed group to "Amusements/Games" - added %%{?_smp_mflags} to make invocation to speed up SMP builds * Sat Oct 07 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-1 - initial package based on the old RH 5.2 package and a patch from Debian Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/scottfree/F-9/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 12:34:14 -0000 1.1 +++ .cvsignore 19 Jul 2008 17:39:57 -0000 1.2 @@ -0,0 +1 @@ +ScottFree.tar.gz Index: sources =================================================================== RCS file: /cvs/free/rpms/scottfree/F-9/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 12:34:14 -0000 1.1 +++ sources 19 Jul 2008 17:39:57 -0000 1.2 @@ -0,0 +1 @@ +d7802a1fee4dc81d35eca76b75cac8eb ScottFree.tar.gz

16 years, 4 months

1
0
0 / 0

rpms/scottfree/devel scottfree.spec,1.1,1.2

by Andrea Musuruane

Author: musuruan Update of /cvs/free/rpms/scottfree/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv26833 Modified Files: scottfree.spec Log Message: * Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 1.14-3 - changed license due to new guidelines - removed %{?dist} tag from changelog Index: scottfree.spec =================================================================== RCS file: /cvs/free/rpms/scottfree/devel/scottfree.spec,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- scottfree.spec 19 Jul 2008 15:13:58 -0000 1.1 +++ scottfree.spec 19 Jul 2008 17:36:57 -0000 1.2 @@ -1,8 +1,8 @@ Summary: Interpreter for Scott Adams format text adventure games Name: scottfree Version: 1.14 -Release: 2%{?dist} -License: GPL +Release: 3%{?dist} +License: GPLv2+ Group: Amusements/Games Source: ftp://ftp.gmd.de/if-archive/scott-adams/ScottFree.tar.gz Patch: scottfree-1.14.diff @@ -37,11 +37,15 @@ %doc README Definition %changelog -* Mon Oct 09 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-2%{?dist} +* Fri Nov 02 2007 Andrea Musuruane <musuruan(a)gmail.com> 1.14-3 +- changed license due to new guidelines +- removed %%{?dist} tag from changelog + +* Mon Oct 09 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-2 - changed patch name to lowercase to match RPM name - changed group to "Amusements/Games" - added %%{?_smp_mflags} to make invocation to speed up SMP builds -* Sat Oct 07 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-1%{?dist} +* Sat Oct 07 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-1 - initial package based on the old RH 5.2 package and a patch from Debian

16 years, 4 months

1
0
0 / 0

rpms/scottfree/devel scottfree-1.14.diff, NONE, 1.1 scottfree.spec, NONE, 1.1 .cvsignore, 1.1, 1.2 sources, 1.1, 1.2

by Xavier Lamien

Author: laxathom Update of /cvs/free/rpms/scottfree/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv19149/devel Modified Files: .cvsignore sources Added Files: scottfree-1.14.diff scottfree.spec Log Message: Initial Import. scottfree-1.14.diff: --- NEW FILE scottfree-1.14.diff --- --- scottfree-1.14.orig/Makefile +++ scottfree-1.14/Makefile @@ -4,11 +4,16 @@ CC = gcc # # -all : ScottCurses +all : scottfree ScottCurses.o: ScottCurses.c Scott.h -ScottCurses: ScottCurses.o - $(CC) ScottCurses.o -o ScottCurses -lcurses -ltermcap +scottfree: ScottCurses.o + $(CC) ScottCurses.o -o scottfree -lcurses +install: + mkdir -p $(DESTDIR)/usr/bin + install -m 755 scottfree $(DESTDIR)/usr/bin +clean: + rm -f ScottCurses.o scottfree --- scottfree-1.14.orig/ScottCurses.c +++ scottfree-1.14/ScottCurses.c @@ -20,6 +20,8 @@ #include <curses.h> #include <stdarg.h> #include <signal.h> +#include <unistd.h> +#include <sys/types.h> #include "Scott.h" --- NEW FILE scottfree.spec --- Summary: Interpreter for Scott Adams format text adventure games Name: scottfree Version: 1.14 Release: 2%{?dist} License: GPL Group: Amusements/Games Source: ftp://ftp.gmd.de/if-archive/scott-adams/ScottFree.tar.gz Patch: scottfree-1.14.diff BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) BuildRequires: ncurses-devel %description ScottFree is an interpreter for Scott-Adams-format text adventure games (remember those?). It reads and executes TRS-80 format data files. Most Adventure International Games are distributed as shareware and are available from ftp://ftp.gmd.de/if-archive/scott-adams/ %prep %setup -q -c %patch -p1 chmod 644 * %build make %{?_smp_mflags} %install rm -rf %{buildroot} make install DESTDIR=%{buildroot} %clean rm -rf %{buildroot} %files %defattr(-,root,root) %{_bindir}/scottfree %doc README Definition %changelog * Mon Oct 09 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-2%{?dist} - changed patch name to lowercase to match RPM name - changed group to "Amusements/Games" - added %%{?_smp_mflags} to make invocation to speed up SMP builds * Sat Oct 07 2006 Andrea Musuruane <musuruan(a)gmail.com> 1.14-1%{?dist} - initial package based on the old RH 5.2 package and a patch from Debian Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/scottfree/devel/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 1 Jun 2008 12:34:14 -0000 1.1 +++ .cvsignore 19 Jul 2008 15:13:58 -0000 1.2 @@ -0,0 +1 @@ +ScottFree.tar.gz Index: sources =================================================================== RCS file: /cvs/free/rpms/scottfree/devel/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 1 Jun 2008 12:34:14 -0000 1.1 +++ sources 19 Jul 2008 15:13:58 -0000 1.2 @@ -0,0 +1 @@ +d7802a1fee4dc81d35eca76b75cac8eb ScottFree.tar.gz

16 years, 4 months

1
0
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

rpmfusion-commits July 2008