rpms/ultrastardx/devel ultrastardx-ffmpeg-headers.patch, NONE, 1.1 .cvsignore, 1.2, 1.3 sources, 1.2, 1.3 ultrastardx.spec, 1.4, 1.5
by Felix Kaechele
Author: felix
Update of /cvs/free/rpms/ultrastardx/devel
In directory se02.es.rpmfusion.net:/tmp/cvs-serv19006
Modified Files:
.cvsignore sources ultrastardx.spec
Added Files:
ultrastardx-ffmpeg-headers.patch
Log Message:
* Wed Apr 01 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.6.20090331
- new snapshot and reworked ffmpeg headers
ultrastardx-ffmpeg-headers.patch:
--- NEW FILE ultrastardx-ffmpeg-headers.patch ---
Index: src/lib/ffmpeg/avformat.pas
===================================================================
--- src/lib/ffmpeg/avformat.pas (Revision 1657)
+++ src/lib/ffmpeg/avformat.pas (Arbeitskopie)
@@ -27,7 +27,7 @@
(*
* Conversion of libavformat/avformat.h
* Min. version: 50.5.0 , revision 6577, Sat Oct 7 15:30:46 2006 UTC
- * Max. version: 52.25.0, revision 16986, Wed Feb 4 05:56:39 2009 UTC
+ * Max. version: 52.32.0, revision 18286, Tue Mar 31 22:29:24 2009 UTC
*)
unit avformat;
@@ -60,7 +60,7 @@
const
(* Max. supported version by this header *)
LIBAVFORMAT_MAX_VERSION_MAJOR = 52;
- LIBAVFORMAT_MAX_VERSION_MINOR = 25;
+ LIBAVFORMAT_MAX_VERSION_MINOR = 32;
LIBAVFORMAT_MAX_VERSION_RELEASE = 0;
LIBAVFORMAT_MAX_VERSION = (LIBAVFORMAT_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBAVFORMAT_MAX_VERSION_MINOR * VERSION_MINOR) +
@@ -653,6 +653,18 @@
cur_len: cint;
cur_pkt: TAVPacket;
{$IFEND}
+
+ {$IF LIBAVFORMAT_VERSION > 52030000} // > 52.30.0
+ // Timestamp generation support:
+ (**
+ * Timestamp corresponding to the last dts sync point.
+ *
+ * Initialized when AVCodecParserContext.dts_sync_point >= 0 and
+ * a DTS is received from the underlying container. Otherwise set to
+ * AV_NOPTS_VALUE by default.
+ *)
+ reference_dts: cint64;
+ {$IFEND}
end;
(**
Index: src/lib/ffmpeg/swscale.pas
===================================================================
--- src/lib/ffmpeg/swscale.pas (Revision 1657)
+++ src/lib/ffmpeg/swscale.pas (Arbeitskopie)
@@ -44,13 +44,14 @@
uses
ctypes,
+ avcodec,
avutil,
UConfig;
const
(* Max. supported version by this header *)
LIBSWSCALE_MAX_VERSION_MAJOR = 0;
- LIBSWSCALE_MAX_VERSION_MINOR = 6;
+ LIBSWSCALE_MAX_VERSION_MINOR = 7;
LIBSWSCALE_MAX_VERSION_RELEASE = 1;
LIBSWSCALE_MAX_VERSION = (LIBSWSCALE_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBSWSCALE_MAX_VERSION_MINOR * VERSION_MINOR) +
@@ -130,8 +131,8 @@
// coeffs cannot be shared between vectors
PSwsVector = ^TSwsVector;
TSwsVector = record
- coeff: PCdouble;
- length: cint;
+ coeff: PCdouble; ///< pointer to the list of coefficients
+ length: cint; ///< number of coefficients in the vector
end;
// vectors can be shared
@@ -152,13 +153,52 @@
procedure sws_freeContext(swsContext: PSwsContext);
cdecl; external sw__scale;
+(**
+ * Allocates and returns a SwsContext. You need it to perform
+ * scaling/conversion operations using sws_scale().
+ *
+ * @param srcW the width of the source image
+ * @param srcH the height of the source image
+ * @param srcFormat the source image format
+ * @param dstW the width of the destination image
+ * @param dstH the height of the destination image
+ * @param dstFormat the destination image format
+ * @param flags specify which algorithm and options to use for rescaling
+ * @return a pointer to an allocated context, or NULL in case of error
+ *)
function sws_getContext(srcW: cint; srcH: cint; srcFormat: TAVPixelFormat;
dstW: cint; dstH: cint; dstFormat: TAVPixelFormat; flags: cint;
srcFilter: PSwsFilter; dstFilter: PSwsFilter; param: PCdouble): PSwsContext;
cdecl; external sw__scale;
-function sws_scale(context: PSwsContext; src: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint; srcSliceH: cint;
+
+(**
+ * Scales the image slice in \p srcSlice and puts the resulting scaled
+ * slice in the image in \p dst. A slice is a sequence of consecutive
+ * rows in an image.
+ *
+ * @param context the scaling context previously created with
+ * sws_getContext()
+ * @param srcSlice the array containing the pointers to the planes of
+ * the source slice
+ * @param srcStride the array containing the strides for each plane of
+ * the source image
+ * @param srcSliceY the position in the source image of the slice to
+ * process, that is the number (counted starting from
+ * zero) in the image of the first row of the slice
+ * @param srcSliceH the height of the source slice, that is the number
+ * of rows in the slice
+ * @param dst the array containing the pointers to the planes of
+ * the destination image
+ * @param dstStride the array containing the strides for each plane of
+ * the destination image
+ * @return the height of the output slice
+ *)
+function sws_scale(context: PSwsContext; srcSlice: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint; srcSliceH: cint;
dst: PPCuint8Array; dstStride: PCintArray): cint;
cdecl; external sw__scale;
+(**
+ * @deprecated Use sws_scale() instead.
+ *)
function sws_scale_ordered(context: PSwsContext; src: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint;
srcSliceH: cint; dst: PPCuint8Array; dstStride: PCintArray): cint;
cdecl; external sw__scale; deprecated;
@@ -169,14 +209,38 @@
function sws_getColorspaceDetails(c: PSwsContext; var inv_table: PQuadCintArray; var srcRange: cint; var table: PQuadCintArray; var dstRange: cint;
var brightness: cint; var contrast: cint; var saturation: cint): cint;
cdecl; external sw__scale;
+
+(**
+ * Returns a normalized Gaussian curve used to filter stuff
+ * quality=3 is high quality, lower is lower quality.
+ *)
function sws_getGaussianVec(variance: cdouble; quality: cdouble): PSwsVector;
cdecl; external sw__scale;
+
+(**
+ * Allocates and returns a vector with \p length coefficients, all
+ * with the same value \p c.
+ *)
function sws_getConstVec(c: cdouble; length: cint): PSwsVector;
cdecl; external sw__scale;
+
+(**
+ * Allocates and returns a vector with just one coefficient, with
+ * value 1.0.
+ *)
function sws_getIdentityVec: PSwsVector;
cdecl; external sw__scale;
+
+(**
+ * Scales all the coefficients of \p a by the \p scalar value.
+ *)
procedure sws_scaleVec(a: PSwsVector; scalar: cdouble);
cdecl; external sw__scale;
+
+(**
+ * Scales all the coefficients of \p a so that their sum equals \p
+ * height."
+ *)
procedure sws_normalizeVec(a: PSwsVector; height: cdouble);
cdecl; external sw__scale;
procedure sws_convVec(a: PSwsVector; b: PSwsVector);
@@ -187,23 +251,53 @@
cdecl; external sw__scale;
procedure sws_shiftVec(a: PSwsVector; shift: cint);
cdecl; external sw__scale;
+
+(**
+ * Allocates and returns a clone of the vector \p a, that is a vector
+ * with the same coefficients as \p a.
+ *)
function sws_cloneVec(a: PSwsVector): PSwsVector;
cdecl; external sw__scale;
+(**
+ * @deprecated Use sws_printVec2() instead.
+ *)
procedure sws_printVec(a: PSwsVector);
cdecl; external sw__scale;
+
+(**
+ * Prints with av_log() a textual representation of the vector \p a
+ * if \p log_level <= av_log_level.
+ *)
+
+procedure sws_printVec2(a: PSwsVector; log_ctx: TAVClass; log_level: cint);
+ cdecl; external sw__scale;
+
procedure sws_freeVec(a: PSwsVector);
cdecl; external sw__scale;
-function sws_getDefaultFilter(lumaGBlur: cfloat; chromaGBlur: cfloat; lumaSarpen: cfloat; chromaSharpen: cfloat; chromaHShift: cfloat;
+function sws_getDefaultFilter(lumaGBlur: cfloat; chromaGBlur: cfloat; lumaSharpen: cfloat; chromaSharpen: cfloat; chromaHShift: cfloat;
chromaVShift: cfloat; verbose: cint): PSwsFilter;
cdecl; external sw__scale;
procedure sws_freeFilter(filter: PSwsFilter);
cdecl; external sw__scale;
+(**
+ * Checks if \p context can be reused, otherwise reallocates a new
+ * one.
+ *
+ * If \p context is NULL, just calls sws_getContext() to get a new
+ * context. Otherwise, checks if the parameters are the ones already
+ * saved in \p context. If that is the case, returns the current
+ * context. Otherwise, frees \p context and gets a new context with
+ * the new parameters.
+ *
+ * Be warned that \p srcFilter and \p dstFilter are not checked, they
+ * are assumed to remain the same.
+ *)
function sws_getCachedContext(context: PSwsContext;
- srcW: cint; srcH: cint; srcFormat: cint;
- dstW: cint; dstH: cint; dstFormat: cint; flags: cint;
+ srcW: cint; srcH: cint; srcFormat: TAVPixelFormat;
+ dstW: cint; dstH: cint; dstFormat: TAVPixelFormat; flags: cint;
srcFilter: PSwsFilter; dstFilter: PSwsFilter; param: PCdouble): PSwsContext;
cdecl; external sw__scale;
Index: src/lib/ffmpeg/avcodec.pas
===================================================================
--- src/lib/ffmpeg/avcodec.pas (Revision 1657)
+++ src/lib/ffmpeg/avcodec.pas (Arbeitskopie)
@@ -27,7 +27,7 @@
(*
* Conversion of libavcodec/avcodec.h
* Min. version: 51.16.0, revision 6577, Sat Oct 7 15:30:46 2006 UTC
- * Max. version: 52.11.0, revision 16912, Sun Feb 1 02:00:19 2009 UTC
+ * Max. version: 52.22.3, revision 18286, Tue Mar 31 22:29:24 2009 UTC
*)
unit avcodec;
@@ -60,8 +60,8 @@
const
(* Max. supported version by this header *)
LIBAVCODEC_MAX_VERSION_MAJOR = 52;
- LIBAVCODEC_MAX_VERSION_MINOR = 11;
- LIBAVCODEC_MAX_VERSION_RELEASE = 0;
+ LIBAVCODEC_MAX_VERSION_MINOR = 22;
+ LIBAVCODEC_MAX_VERSION_RELEASE = 3;
LIBAVCODEC_MAX_VERSION = (LIBAVCODEC_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBAVCODEC_MAX_VERSION_MINOR * VERSION_MINOR) +
(LIBAVCODEC_MAX_VERSION_RELEASE * VERSION_RELEASE);
@@ -233,6 +233,9 @@
CODEC_ID_MOTIONPIXELS,
CODEC_ID_TGV,
CODEC_ID_TGQ,
+ CODEC_ID_TQI,
+ CODEC_ID_AURA,
+ CODEC_ID_AURA2,
//* various PCM "codecs" */
CODEC_ID_PCM_S16LE= $10000,
@@ -354,6 +357,8 @@
CODEC_ID_EAC3,
CODEC_ID_SIPR,
CODEC_ID_MP1,
+ CODEC_ID_TWINVQ,
+ CODEC_ID_TRUEHD,
//* subtitle codecs */
CODEC_ID_DVD_SUBTITLE= $17000,
@@ -753,6 +758,7 @@
* is this picture used as reference
* The values for this are the same as the MpegEncContext.picture_structure
* variable, that is 1->top field, 2->bottom field, 3->frame/both fields.
+ * Set to 4 for delayed, non-reference frames.\
* - encoding: unused
* - decoding: Set by libavcodec. (before get_buffer() call)).
*)
@@ -886,7 +892,17 @@
*)
reordered_opaque: cint64;
{$IFEND}
-
+
+ {$IF LIBAVCODEC_VERSION >= 52021000} // 52.21.0
+ (**
+ * hardware accelerator private data (FFmpeg allocated)
+ * - encoding: unused
+ * - decoding: Set by libavcodec
+ *)
+ hwaccel_data_private: pointer;
+ hwaccel_picture_private: pointer;
+ {$IFEND}
+
{$IF LIBAVCODEC_VERSION >= 51070000} // 51.70.0
(**
* Bits per sample/pixel of internal libavcodec pixel/sample format.
@@ -928,6 +944,40 @@
*)
rc_min_vbv_overflow_use: cfloat;
{$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0
+ (**
+ * Hardware accelerator in use
+ * - encoding: unused.
+ * - decoding: Set by libavcodec
+ *)
+ hwaccel: pointer;
+ {$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52020000} // 52.20.0
+ (**
+ * For some codecs, the time base is closer to the field rate than the frame rate.
+ * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration
+ * if no telecine is used ...
+ *
+ * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2.
+ *)
+ ticks_per_frame: cint;
+ {$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52021000} // 52.21.0
+ (**
+ * Hardware accelerator context.
+ * For some hardware accelerators, a global context needs to be
+ * provided by the user. In that case, this holds display-dependent
+ * data FFmpeg cannot instantiate itself. Please refer to the
+ * FFmpeg HW accelerator documentation to know how to fill this
+ * is. e.g. for VA API, this is a struct vaapi_context.
+ * - encoding: unused
+ * - decoding: Set by user
+ *)
+ hwaccel_context: pointer;
+ {$IFEND}
end;
const
@@ -1273,6 +1323,13 @@
* decoder to draw a horizontal band. It improves cache usage. Not
* all codecs can do that. You must check the codec capabilities
* beforehand.
+ * The function is also used by hardware acceleration APIs.
+ * It is called at least once during frame decoding to pass
+ * the data needed for hardware render.
+ * In that mode instead of pixel data, AVFrame points to
+ * a structure specific to the acceleration API. The application
+ * reads the structure and can change some fields to indicate progress
+ * or mark state.
* - encoding: unused
* - decoding: Set by user.
* @param height the height of the slice
@@ -1505,7 +1562,8 @@
release_buffer: procedure (c: PAVCodecContext; pic: PAVFrame); cdecl;
(**
- * If 1 the stream has a 1 frame delay during decoding.
+ * Size of the frame reordering buffer in the decoder.
+ * For MPEG-2 it is 1 IPB or 0 low delay IP.
* - encoding: Set by libavcodec.
* - decoding: Set by libavcodec.
*)
@@ -2511,7 +2569,102 @@
{$IFEND}
end;
+type
(**
+ * AVHWAccel.
+ *)
+ PAVHWAccel = ^TAVHWAccel;
+ TAVHWAccel = record
+ (**
+ * Name of the hardware accelerated codec.
+ * The name is globally unique among encoders and among decoders (but an
+ * encoder and a decoder can share the same name).
+ *)
+ name: PAnsiChar;
+
+ (**
+ * Type of codec implemented by the hardware accelerator.
+ *
+ * See CODEC_TYPE_xxx
+ *)
+ type_: TCodecType;
+
+ (**
+ * Codec implemented by the hardware accelerator.
+ *
+ * See CODEC_ID_xxx
+ *)
+ id: TCodecID;
+
+ (**
+ * Supported pixel format.
+ *
+ * Only hardware accelerated formats are supported here.
+ *)
+ pix_fmt: {const} PAVPixelFormat;
+
+ (**
+ * Hardware accelerated codec capabilities.
+ * see FF_HWACCEL_CODEC_CAP_*
+ *)
+ capabilities: cint;
+
+ next: PAVCodec;
+
+ (**
+ * Called at the beginning of each frame or field picture.
+ *
+ * Meaningful frame information (codec specific) is guaranteed to
+ * be parsed at this point. This function is mandatory.
+ *
+ * Note that \p buf can be NULL along with \p buf_size set to 0.
+ * Otherwise, this means the whole frame is available at this point.
+ *
+ * @param avctx the codec context
+ * @param buf the frame data buffer base
+ * @param buf_size the size of the frame in bytes
+ * @return zero if successful, a negative value otherwise
+ *)
+ start_frame: function (avctx: PAVCodecContext; buf: PByteArray; buf_size: cint): cint; cdecl;
+
+ (**
+ * Callback for each slice.
+ *
+ * Meaningful slice information (codec specific) is guaranteed to
+ * be parsed at this point. This function is mandatory.
+ *
+ * @param avctx the codec context
+ * @param buf the slice data buffer base
+ * @param buf_size the size of the slice in bytes
+ * @return zero if successful, a negative value otherwise
+ *)
+ decode_slice: function (avctx: PAVCodecContext; buf: PByteArray; buf_size: cint): cint; cdecl;
+
+ (**
+ * Called at the end of each frame or field picture.
+ *
+ * The whole picture is parsed at this point and can now be sent
+ * to the hardware accelerator. This function is mandatory.
+ *
+ * @param avctx the codec context
+ * @return zero if successful, a negative value otherwise
+ *)
+ end_frame: function (avctx: PAVCodecContext): cint; cdecl;
+
+ {$IF LIBAVCODEC_VERSION < 52021000} // < 52.21.0
+ (**
+ * Size of HW accelerator private data.
+ *
+ * Private data is allocated with av_malloc() before
+ * AVCodecContext::get_buffer() and deallocated after
+ * AVCodecContext::release_buffer().
+ *)
+ priv_data_size: cint;
+ {$IFEND}
+
+ end;
+
+(**
* four components are given, that's all.
* the last component is alpha
*)
@@ -2603,6 +2756,30 @@
function audio_resample_init (output_channels: cint; input_channels: cint;
output_rate: cint; input_rate: cint): PReSampleContext;
+ cdecl; external av__codec; deprecated;
+
+
+(**
+ * Initializes audio resampling context
+ *
+ * @param output_channels number of output channels
+ * @param input_channels number of input channels
+ * @param output_rate output sample rate
+ * @param input_rate input sample rate
+ * @param sample_fmt_out requested output sample format
+ * @param sample_fmt_in input sample format
+ * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
+ * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
+ * @param linear If 1 then the used FIR filter will be linearly interpolated
+ between the 2 closest, if 0 the closest will be used
+ * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
+ * @return allocated ReSampleContext, NULL if error occured
+ *)
+function av_audio_resample_init (output_channels: cint; input_channels: cint;
+ output_rate: cint; input_rate: cint;
+ sample_fmt_out: TSampleFormat; sample_fmt_in: TSampleFormat;
+ filter_length: cint; log2_phase_count: cint;
+ linear: cint; cutoff: cdouble): PReSampleContext;
cdecl; external av__codec;
function audio_resample (s: PReSampleContext; output: PSmallint; input: PSmallint; nb_samples: cint): cint;
@@ -2611,15 +2788,44 @@
procedure audio_resample_close (s: PReSampleContext);
cdecl; external av__codec;
-
+(**
+ * Initializes an audio resampler.
+ * Note, if either rate is not an integer then simply scale both rates up so they are.
+ * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq
+ * @param log2_phase_count log2 of the number of entries in the polyphase filterbank
+ * @param linear If 1 then the used FIR filter will be linearly interpolated
+ between the 2 closest, if 0 the closest will be used
+ * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate
+ *)
function av_resample_init (out_rate: cint; in_rate: cint; filter_length: cint;
log2_phase_count: cint; linear: cint; cutoff: cdouble): PAVResampleContext;
cdecl; external av__codec;
+(**
+ * resamples.
+ * @param src an array of unconsumed samples
+ * @param consumed the number of samples of src which have been consumed are returned here
+ * @param src_size the number of unconsumed samples available
+ * @param dst_size the amount of space in samples available in dst
+ * @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context.
+ * @return the number of samples written in dst or -1 if an error occurred
+ *)
function av_resample (c: PAVResampleContext; dst: PSmallint; src: PSmallint; var consumed: cint;
src_size: cint; dst_size: cint; update_ctx: cint): cint;
cdecl; external av__codec;
+(**
+ * Compensates samplerate/timestamp drift. The compensation is done by changing
+ * the resampler parameters, so no audible clicks or similar distortions occur
+ * @param compensation_distance distance in output samples over which the compensation should be performed
+ * @param sample_delta number of output samples which should be output less
+ *
+ * example: av_resample_compensate(c, 10, 500)
+ * here instead of 510 samples only 500 samples would be output
+ *
+ * note, due to rounding the actual compensation might be slightly different,
+ * especially if the compensation_distance is large and the in_rate used during init is small
+ *)
procedure av_resample_compensate (c: PAVResampleContext; sample_delta: cint;
compensation_distance: cint);
cdecl; external av__codec;
@@ -2692,6 +2898,7 @@
* If a planar format is specified, several pointers will be set pointing to
* the different picture planes and the line sizes of the different planes
* will be stored in the lines_sizes array.
+ * Call with ptr == NULL to get the required size for the ptr buffer.
*
* @param picture AVPicture whose fields are to be filled in
* @param ptr Buffer which will contain or contains the actual image data
@@ -2712,11 +2919,14 @@
(**
* Calculate the size in bytes that a picture of the given width and height
* would occupy if stored in the given picture format.
+ * Note that this returns the size of a compact representation as generated
+ * by avpicture_layout, which can be smaller than the size required for e.g.
+ * avpicture_fill.
*
* @param pix_fmt the given picture format
* @param width the width of the image
* @param height the height of the image
- * @return Image data size in bytes
+ * @return Image data size in bytes or -1 on error (e.g. too large dimensions).
*)
function avpicture_get_size (pix_fmt: TAVPixelFormat; width: cint; height: cint): cint;
cdecl; external av__codec;
@@ -2730,6 +2940,17 @@
procedure avcodec_set_dimensions(s: PAVCodecContext; width: cint; height: cint);
cdecl; external av__codec;
+(**
+ * Returns the pixel format corresponding to the name \p name.
+ *
+ * If there is no pixel format with name \p name, then looks for a
+ * pixel format with the name corresponding to the native endian
+ * format of \p name.
+ * For example in a little-endian system, first looks for "gray16",
+ * then for "gray16le".
+ *
+ * Finally if no pixel format has been found, returns \c PIX_FMT_NONE.
+ *)
function avcodec_get_pix_fmt(name: {const} PAnsiChar): TAVPixelFormat;
cdecl; external av__codec;
@@ -2851,6 +3072,11 @@
}
{$IFEND}
+(**
+ * If c is NULL, returns the first registered codec,
+ * if c is non-NULL, returns the next registered codec after c,
+ * or NULL if c is the last one.
+ *)
{$IF LIBAVCODEC_VERSION >= 51049000} // 51.49.0
function av_codec_next(c: PAVCodec): PAVCodec;
cdecl; external av__codec;
@@ -2882,9 +3108,13 @@
*
* @see avcodec_init()
*)
+{$IF LIBAVCODEC_VERSION >= 52014000} // 52.14.00
+procedure avcodec_register(codec: PAVCodec);
+ cdecl; external av__codec; deprecated;
+{$ELSE}
procedure register_avcodec(codec: PAVCodec);
- cdecl; external av__codec;
-
+ cdecl; external av__codec; deprecated;
+{$IFEND}
(**
* Finds a registered encoder with a matching codec ID.
*
@@ -3207,7 +3437,7 @@
* which formats you want to support, by using the individual registration
* functions.
*
- * @see register_avcodec
+ * @see avcodec_register
* @see av_register_codec_parser
* @see av_register_bitstream_filter
*)
@@ -3271,6 +3501,15 @@
next_frame_offset: cint64; (* offset of the next frame *)
(* video info *)
pict_type: cint; (* XXX: put it back in AVCodecContext *)
+ (**
+ * This field is used for proper frame duration computation in lavf.
+ * It signals, how much longer the frame duration of the current frame
+ * is compared to normal frame duration.
+ *
+ * frame_duration = (1 + repeat_pict) * time_base
+ *
+ * It is used by codecs like H.264 to display telecined material.
+ *)
repeat_pict: cint; (* XXX: put it back in AVCodecContext *)
pts: cint64; (* pts of the current frame *)
dts: cint64; (* dts of the current frame *)
@@ -3293,6 +3532,98 @@
{$IF LIBAVCODEC_VERSION >= 51057001} // 51.57.1
cur_frame_end: array [0..AV_PARSER_PTS_NB - 1] of cint64;
{$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52016000} // 52.16.0
+ (*!
+ * Set by parser to 1 for key frames and 0 for non-key frames.
+ * It is initialized to -1, so if the parser doesn't set this flag,
+ * old-style fallback using FF_I_TYPE picture type as key frames
+ * will be used.
+ *)
+
+ key_frame: cint;
+ {$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52018000} // 52.18.0
+ (**
+ * Time difference in stream time base units from the pts of this
+ * packet to the point at which the output from the decoder has converged
+ * independent from the availability of previous frames. That is, the
+ * frames are virtually identical no matter if decoding started from
+ * the very first frame or from this keyframe.
+ * Is AV_NOPTS_VALUE if unknown.
+ * This field is not the display duration of the current frame.
+ *
+ * The purpose of this field is to allow seeking in streams that have no
+ * keyframes in the conventional sense. It corresponds to the
+ * recovery point SEI in H.264 and match_time_delta in NUT. It is also
+ * essential for some types of subtitle streams to ensure that all
+ * subtitles are correctly displayed after seeking.
+ *)
+ convergence_duration: cint64;
+ {$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0
+ // Timestamp generation support:
+ (**
+ * Synchronization point for start of timestamp generation.
+ *
+ * Set to >0 for sync point, 0 for no sync point and <0 for undefined
+ * (default).
+ *
+ * For example, this corresponds to presence of H.264 buffering period
+ * SEI message.
+ *)
+ dts_sync_point: cint;
+
+ (**
+ * Offset of the current timestamp against last timestamp sync point in
+ * units of AVCodecContext.time_base.
+ *
+ * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
+ * contain a valid timestamp offset.
+ *
+ * Note that the timestamp of sync point has usually a nonzero
+ * dts_ref_dts_delta, which refers to the previous sync point. Offset of
+ * the next frame after timestamp sync point will be usually 1.
+ *
+ * For example, this corresponds to H.264 cpb_removal_delay.
+ *)
+ dts_ref_dts_delta: cint;
+
+ (**
+ * Presentation delay of current frame in units of AVCodecContext.time_base.
+ *
+ * Set to INT_MIN when dts_sync_point unused. Otherwise, it must
+ * contain valid non-negative timestamp delta (presentation time of a frame
+ * must not lie in the past).
+ *
+ * This delay represents the difference between decoding and presentation
+ * time of the frame.
+ *
+ * For example, this corresponds to H.264 dpb_output_delay.
+ *)
+ pts_dts_delta: cint;
+ {$IFEND}
+
+ {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0
+ (**
+ * Position of the packet in file.
+ *
+ * Analogous to cur_frame_pts/dts
+ *)
+ cur_frame_pos: array [0..AV_PARSER_PTS_NB - 1] of cint64;
+
+ (**
+ * Byte position of currently parsed frame in stream.
+ *)
+ pos: cint64;
+
+ (**
+ * Previous frame byte position.
+ *)
+ last_pos: cint64;
+ {$IFEND}
end;
TAVCodecParser = record
@@ -3332,11 +3663,47 @@
poutbuf: PPointer; poutbuf_size: PCint;
buf: {const} PByteArray; buf_size: cint;
pts: cint64; dts: cint64): cint;
+ cdecl; external av__codec; deprecated;
+(**
+ * Parse a packet.
+ *
+ * @param s parser context.
+ * @param avctx codec context.
+ * @param poutbuf set to pointer to parsed buffer or NULL if not yet finished.
+ * @param poutbuf_size set to size of parsed buffer or zero if not yet finished.
+ * @param buf input buffer.
+ * @param buf_size input length, to signal EOF, this should be 0 (so that the last frame can be output).
+ * @param pts input presentation timestamp.
+ * @param dts input decoding timestamp.
+ * @param pos input byte position in stream.
+ * @return the number of bytes of the input bitstream used.
+ *
+ * Example:
+ * @code
+ * while(in_len){
+ * len = av_parser_parse2(myparser, AVCodecContext, &data, &size,
+ * in_data, in_len,
+ * pts, dts, pos);
+ * in_data += len;
+ * in_len -= len;
+ *
+ * if(size)
+ * decode_frame(data, size);
+ * }
+ * @endcode
+ *)
+function av_parser_parse2(s: PAVCodecParserContext;
+ avctx: PAVCodecContext;
+ poutbuf: PPointer; poutbuf_size: PCint;
+ buf: {const} PByteArray; buf_size: cint;
+ pts: cint64; dts: cint64;
+ pos: cint64): cint;
cdecl; external av__codec;
+
function av_parser_change(s: PAVCodecParserContext;
- avctx: PAVCodecContext;
- poutbuf: PPointer; poutbuf_size: PCint;
- buf: {const} PByteArray; buf_size: cint; keyframe: cint): cint;
+ avctx: PAVCodecContext;
+ poutbuf: PPointer; poutbuf_size: PCint;
+ buf: {const} PByteArray; buf_size: cint; keyframe: cint): cint;
cdecl; external av__codec;
procedure av_parser_close(s: PAVCodecParserContext);
cdecl; external av__codec;
@@ -3434,20 +3801,20 @@
* Copy image 'src' to 'dst'.
*)
procedure av_picture_copy(dst: PAVPicture; src: {const} PAVPicture;
- pix_fmt: cint; width: cint; height: cint);
+ pix_fmt: TAVPixelFormat; width: cint; height: cint);
cdecl; external av__codec;
(**
* Crop image top and left side.
*)
function av_picture_crop(dst: PAVPicture; src: {const} PAVPicture;
- pix_fmt: cint; top_band: cint; left_band: cint): cint;
+ pix_fmt: TAVPixelFormat; top_band: cint; left_band: cint): cint;
cdecl; external av__codec;
(**
* Pad image.
*)
-function av_picture_pad(dst: PAVPicture; src: {const} PAVPicture; height: cint; width: cint; pix_fmt: cint;
+function av_picture_pad(dst: PAVPicture; src: {const} PAVPicture; height: cint; width: cint; pix_fmt: TAVPixelFormat;
padtop: cint; padbottom: cint; padleft: cint; padright: cint; color: PCint): cint;
cdecl; external av__codec;
{$IFEND}
@@ -3499,7 +3866,7 @@
*
* @return 0 in case of a successful parsing, a negative value otherwise
* @param[in] str the string to parse: it has to be a string in the format
- * <frame_rate_nom>/<frame_rate_den>, a float number or a valid video rate abbreviation
+ * <frame_rate_num>/<frame_rate_den>, a float number or a valid video rate abbreviation
* @param[in,out] frame_rate pointer to the AVRational which will contain the detected
* frame rate
*)
@@ -3518,11 +3885,13 @@
EDOM = ESysEDOM;
ENOSYS = ESysENOSYS;
EILSEQ = ESysEILSEQ;
+ EPIPE = ESysEPIPE;
{$ELSE}
ENOENT = 2;
EIO = 5;
ENOMEM = 12;
EINVAL = 22;
+ EPIPE = 32;
EDOM = 33;
{$IFDEF MSWINDOWS}
// Note: we assume that ffmpeg was compiled with MinGW.
@@ -3559,11 +3928,27 @@
AVERROR_NOMEM = AVERROR_SIGN * ENOMEM; (**< not enough memory *)
AVERROR_NOFMT = AVERROR_SIGN * EILSEQ; (**< unknown format *)
AVERROR_NOTSUPP = AVERROR_SIGN * ENOSYS; (**< Operation not supported. *)
- AVERROR_NOENT = AVERROR_SIGN * ENOENT; {**< No such file or directory. *}
+ AVERROR_NOENT = AVERROR_SIGN * ENOENT; (**< No such file or directory. *)
+ AVERROR_EOF = AVERROR_SIGN * EPIPE; (**< End of file. *)
// Note: function calls as constant-initializers are invalid
//AVERROR_PATCHWELCOME = -MKTAG('P','A','W','E'); {**< Not yet implemented in FFmpeg. Patches welcome. *}
AVERROR_PATCHWELCOME = -(ord('P') or (ord('A') shl 8) or (ord('W') shl 16) or (ord('E') shl 24));
+
+(**
+ * Registers the hardware accelerator \p hwaccel.
+ *)
+procedure av_register_hwaccel (hwaccel: PAVHWAccel)
+ cdecl; external av__codec;
+
+(**
+ * If hwaccel is NULL, returns the first registered hardware accelerator,
+ * if hwaccel is non-NULL, returns the next registered hardware accelerator
+ * after hwaccel, or NULL if hwaccel is the last one.
+ *)
+function av_hwaccel_next (hwaccel: PAVHWAccel): PAVHWAccel;
+ cdecl; external av__codec;
+
implementation
end.
Index: src/lib/ffmpeg/avutil.pas
===================================================================
--- src/lib/ffmpeg/avutil.pas (Revision 1657)
+++ src/lib/ffmpeg/avutil.pas (Arbeitskopie)
@@ -29,7 +29,7 @@
*
* libavutil/avutil.h:
* Min. version: 49.0.1, revision 6577, Sat Oct 7 15:30:46 2006 UTC
- * Max. version: 49.14.0, revision 16912, Sun Feb 1 02:00:19 2009 UTC
+ * Max. version: 50.2.0, revision 18286, Tue Mar 31 22:29:24 2009 UTC
*
* libavutil/mem.h:
* revision 16590, Tue Jan 13 23:44:16 2009 UTC
@@ -62,8 +62,8 @@
const
(* Max. supported version by this header *)
- LIBAVUTIL_MAX_VERSION_MAJOR = 49;
- LIBAVUTIL_MAX_VERSION_MINOR = 14;
+ LIBAVUTIL_MAX_VERSION_MAJOR = 50;
+ LIBAVUTIL_MAX_VERSION_MINOR = 2;
LIBAVUTIL_MAX_VERSION_RELEASE = 0;
LIBAVUTIL_MAX_VERSION = (LIBAVUTIL_MAX_VERSION_MAJOR * VERSION_MAJOR) +
(LIBAVUTIL_MAX_VERSION_MINOR * VERSION_MINOR) +
Index: .cvsignore
===================================================================
RCS file: /cvs/free/rpms/ultrastardx/devel/.cvsignore,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- .cvsignore 31 Mar 2009 09:09:33 -0000 1.2
+++ .cvsignore 1 Apr 2009 08:14:09 -0000 1.3
@@ -1,3 +1 @@
-ultrastardx-20090303.tar.lzma
-ultrastardx-256x256.png
-ultrastardx-32x32.png
+ultrastardx-20090331.tar.lzma
Index: sources
===================================================================
RCS file: /cvs/free/rpms/ultrastardx/devel/sources,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- sources 31 Mar 2009 09:09:33 -0000 1.2
+++ sources 1 Apr 2009 08:14:09 -0000 1.3
@@ -1,3 +1 @@
-0c33aff1ad3d1fba02724f65c3b988af ultrastardx-20090303.tar.lzma
-06d53bbf4696562e89cc3d4f4f93738c ultrastardx-256x256.png
-15839edfa9383201bee0565e4a8b9d53 ultrastardx-32x32.png
+80a32a078bafe5caa94f72be81d13e97 ultrastardx-20090331.tar.lzma
Index: ultrastardx.spec
===================================================================
RCS file: /cvs/free/rpms/ultrastardx/devel/ultrastardx.spec,v
retrieving revision 1.4
retrieving revision 1.5
diff -u -r1.4 -r1.5
--- ultrastardx.spec 31 Mar 2009 09:09:33 -0000 1.4
+++ ultrastardx.spec 1 Apr 2009 08:14:09 -0000 1.5
@@ -1,8 +1,8 @@
-%define prever 20090303
+%define prever 20090331
Name: ultrastardx
Version: 1.1.1
-Release: 1%{?prever:.5.%{prever}}%{?dist}
+Release: 1%{?prever:.6.%{prever}}%{?dist}
Summary: Karaoke game inspired by a popular commercial karaoke game
Group: Amusements/Games
@@ -14,6 +14,7 @@
Source2: ultrastardx-256x256.png
Source100: ultrastardx-snapshot.sh
Patch0: ultrastardx-desktop.patch
+Patch1: ultrastardx-ffmpeg-headers.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
Requires: bitstream-vera-sans-fonts gnu-free-sans-fonts
@@ -32,6 +33,7 @@
%prep
%setup -q -n %{name}%{?prever:-%{prever}}
%patch0 -p1
+%patch1
# replace the font paths with Fedora's own
sed -i 's|File=|File=%{_datadir}/fonts/|g' game/fonts/fontsTTF.ini
@@ -92,6 +94,9 @@
%changelog
+* Wed Apr 01 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.6.20090331
+- new snapshot and reworked ffmpeg headers
+
* Tue Mar 31 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.5.20090303
- fixed font deps
15 years, 6 months