rpmfusion-commits April 2012

rpmfusion-commits@lists.rpmfusion.org

21 participants
428 discussions

rpms/mythtv/devel mythtv-0.25-fixes.patch, NONE, 1.1 mythtv_0.25_gcc_4.7.patch, NONE, 1.1 mythtv.spec, 1.89, 1.90 mythtv-0.24.2-fixes.patch, 1.1, NONE mythtv-0.24.2-gcc47.patch, 1.1, NONE

by Richard Shaw

Author: hobbes1069 Update of /cvs/free/rpms/mythtv/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv31553 Modified Files: mythtv.spec Added Files: mythtv-0.25-fixes.patch mythtv_0.25_gcc_4.7.patch Removed Files: mythtv-0.24.2-fixes.patch mythtv-0.24.2-gcc47.patch Log Message: * Tue Mar 20 2012 Richard Shaw <hobbes1069(a)gmail.com> - 0.25-1 - Update to latest release 0.25. mythtv-0.25-fixes.patch: mythplugins/mytharchive/i18n/mytharchive_fi.qm |binary mythplugins/mytharchive/i18n/mytharchive_fi.ts | 238 + mythplugins/mythbrowser/i18n/mythbrowser_fi.qm |binary mythplugins/mythbrowser/i18n/mythbrowser_fi.ts | 44 mythplugins/mythgallery/i18n/mythgallery_fi.qm |binary mythplugins/mythgallery/i18n/mythgallery_fi.ts | 264 + mythplugins/mythgame/i18n/mythgame_fi.qm |binary mythplugins/mythgame/i18n/mythgame_fi.ts | 178 mythplugins/mythmusic/i18n/mythmusic_fi.qm |binary mythplugins/mythmusic/i18n/mythmusic_fi.ts | 2219 +++++++++-- mythplugins/mythnetvision/i18n/mythnetvision_fi.qm |binary mythplugins/mythnetvision/i18n/mythnetvision_fi.ts | 96 mythplugins/mythnews/i18n/mythnews_fi.qm |binary mythplugins/mythnews/i18n/mythnews_fi.ts | 44 mythplugins/mythweather/i18n/mythweather_fi.qm |binary mythplugins/mythweather/i18n/mythweather_fi.ts | 60 mythplugins/mythzoneminder/i18n/mythzoneminder_fi.qm |binary mythplugins/mythzoneminder/i18n/mythzoneminder_fi.ts | 84 mythplugins/mythzoneminder/mythzmserver/zmserver.cpp | 3 mythtv/VERSION | 2 mythtv/docs/doxygen-create-developer-docs.cfg | 2 mythtv/filters/yadif/filter_yadif.c | 2 mythtv/i18n/mythfrontend_fi.qm |binary mythtv/i18n/mythfrontend_fi.ts | 3662 ++++++++++++------- mythtv/libs/libmyth/rssparse.h | 1 mythtv/libs/libmythbase/compat.h | 2 mythtv/libs/libmythtv/audioinput.h | 1 mythtv/libs/libmythtv/tv_play.cpp | 4 mythtv/programs/mythfrontend/guidegrid.cpp | 4 mythtv/programs/mythutil/markuputils.cpp | 4 30 files changed, 5131 insertions(+), 1783 deletions(-) --- NEW FILE mythtv-0.25-fixes.patch --- mythplugins/mytharchive/i18n/mytharchive_fi.qm | Bin 29996 -> 33814 bytes mythplugins/mytharchive/i18n/mytharchive_fi.ts | 238 ++- mythplugins/mythbrowser/i18n/mythbrowser_fi.qm | Bin 6953 -> 6977 bytes mythplugins/mythbrowser/i18n/mythbrowser_fi.ts | 44 +- mythplugins/mythgallery/i18n/mythgallery_fi.qm | Bin 13503 -> 18780 bytes mythplugins/mythgallery/i18n/mythgallery_fi.ts | 264 ++- mythplugins/mythgame/i18n/mythgame_fi.qm | Bin 15868 -> 16084 bytes mythplugins/mythgame/i18n/mythgame_fi.ts | 178 +- mythplugins/mythmusic/i18n/mythmusic_fi.qm | Bin 56677 -> 56868 bytes mythplugins/mythmusic/i18n/mythmusic_fi.ts | 2219 ++++++++++-- mythplugins/mythnetvision/i18n/mythnetvision_fi.qm | Bin 10270 -> 11758 bytes mythplugins/mythnetvision/i18n/mythnetvision_fi.ts | 96 +- mythplugins/mythnews/i18n/mythnews_fi.qm | Bin 4889 -> 4512 bytes mythplugins/mythnews/i18n/mythnews_fi.ts | 44 +- mythplugins/mythweather/i18n/mythweather_fi.qm | Bin 24061 -> 23685 bytes mythplugins/mythweather/i18n/mythweather_fi.ts | 60 +- .../mythzoneminder/i18n/mythzoneminder_fi.qm | Bin 6899 -> 7281 bytes .../mythzoneminder/i18n/mythzoneminder_fi.ts | 84 +- .../mythzoneminder/mythzmserver/zmserver.cpp | 3 - mythtv/VERSION | 2 +- mythtv/docs/doxygen-create-developer-docs.cfg | 2 +- mythtv/filters/yadif/filter_yadif.c | 2 +- mythtv/i18n/mythfrontend_fi.qm | Bin 532091 -> 613881 bytes mythtv/i18n/mythfrontend_fi.ts | 3662 +++++++++++++------- mythtv/libs/libmyth/rssparse.h | 1 + mythtv/libs/libmythbase/compat.h | 2 + mythtv/libs/libmythtv/audioinput.h | 1 + mythtv/libs/libmythtv/tv_play.cpp | 4 +- mythtv/programs/mythfrontend/guidegrid.cpp | 4 +- mythtv/programs/mythutil/markuputils.cpp | 4 +- 30 files changed, 5131 insertions(+), 1783 deletions(-) diff --git a/mythplugins/mytharchive/i18n/mytharchive_fi.qm b/mythplugins/mytharchive/i18n/mytharchive_fi.qm index 2fc0f91..8e2d841 100644 Binary files a/mythplugins/mytharchive/i18n/mytharchive_fi.qm and b/mythplugins/mytharchive/i18n/mytharchive_fi.qm differ diff --git a/mythplugins/mytharchive/i18n/mytharchive_fi.ts b/mythplugins/mytharchive/i18n/mytharchive_fi.ts index 1a10407..48fb51e 100644 --- a/mythplugins/mytharchive/i18n/mytharchive_fi.ts +++ b/mythplugins/mytharchive/i18n/mytharchive_fi.ts @@ -13,10 +13,64 @@ </message> </context> <context> + <name>BurnThemeUI</name> + <message> + <source>Has an intro and contains a main menu with 4 recordings per page. Does not have a chapter selection submenu.</source> + <translation>Sisältää intron ja päävalikon jossa 4 tallennetta per sivu.Ei ole kappaleita alivalikkona. </translation> + </message> + <message> + <source>Has an intro and contains a summary main menu with 10 recordings per page. Does not have a chapter selection submenu, recording titles, dates or category.</source> + <translation>Sisältää intron ja koostepäävalikon jossa 4 tallennetta per sivu.Ei ole kappaleita alivalikkona, tallenteiden nimiä, päivämääriä tai luokkaa.</translation> + </message> + <message> + <source>Has an intro and contains a main menu with 6 recordings per page. Does not have a scene selection submenu.</source> + <translation>Sisältää intron ja päävalikon jossa 6 tallennetta per sivu.Ei ole kohtauksia alivalikkona.</translation> + </message> + <message> + <source>Has an intro and contains a main menu with 3 recordings per page and a scene selection submenu with 8 chapters points. Shows a program details page before each recording.</source> + <translation>Sisältää intron ja koostepäävalikon jossa 3 tallennetta per sivu ja kohtaukset alivalikossa ja 8 kappalepistettä. Näyttää ohjelmatietosivun ennen jokaista tallennetta.</translation> + </message> + <message> + <source>Has an intro and contains a main menu with 3 recordings per page and a scene selection submenu with 8 chapters points. Shows a program details page before each recording. Uses animated thumb images.</source> + <translation>Sisältää intron ja koostepäävalikon jossa 3 tallennetta per sivu ja kohtaukset alivalikossa ja 8 kappalepistettä. Näyttää ohjelmatietosivun ennen jokaista tallennetta. Animoi pienoiskuvat.</translation> + </message> + <message> + <source>Has an intro and contains a main menu with 3 recordings per page and a scene selection submenu with 8 chapters points.</source> + <translation>Sisältää intron ja päävalikon jossa 3 tallennetta per sivu ja kohtausvalikon jossa 8 kappaletta alivalikkona. </translation> + </message> + <message> + <source>Has an intro and contains a main menu with 3 recordings per page and a scene selection submenu with 8 chapters points. All the thumb images are animated.</source> + <translation>Sisältää intron ja päävalikon jossa 3 tallennetta per sivu ja 8:n kappaleen alivalikko. Kaikki pienoiskuvat on animoituja.</translation> + </message> + <message> + <source>Creates an auto play DVD with no menus. Shows an intro movie then for each title shows a details page followed by the video in sequence.</source> + <translation>Luo automaattisesti käynnistyvän DVD:n ilman menuja. Näyttää introvideon ja jokaiselle nimikkeelle näytetään lisätietosivu jota seuraa videot järjestyksessä.</translation> + </message> + <message> + <source>Creates an auto play DVD with no menus and no intro.</source> + <translation>Luo automaattisesti käynnistyvän DVD:n ilman valikkoja ja introja.</translation> + </message> +</context> +<context> + <name>DVDThemeSelector</name> + <message> + <source>No theme description file found!</source> + <translation>Teeman kuvausta ei löydy!</translation> + </message> + <message> + <source>Empty theme description!</source> + <translation>Tyhjä teeman kuvaus!</translation> + </message> + <message> + <source>Unable to open theme description file!</source> + <translation>Ei saada teeman kuvaustiedostoa auki!</translation> + </message> +</context> +<context> <name>ExportNative</name> <message> <source>Cancel</source> - <translation>Peruuta</translation> + <translation type="obsolete">Peruuta</translation> </message> <message> <source>You need to add at least one item to archive!</source> @@ -24,7 +78,7 @@ </message> <message> <source>Menu</source> - <translation></translation> + <translation>Menu</translation> </message> <message> <source>Remove Item</source> @@ -58,6 +112,10 @@ <name>ImportNative</name> <message> <source>You need to select a valid chanID!</source> + <translation type="obsolete">Valitse kelvollinen kanava-id!</translation> + </message> + <message> + <source>You need to select a valid channel id!</source> <translation>Valitse kelvollinen kanava-id!</translation> </message> <message> @@ -65,27 +123,39 @@ <translation>Ei ollut mahdollista tuoda arkistoa. Tapahtui virhe ajettaessa 'mytharchivehelperiä'</translation> </message> <message> - <source>Select a ChanID</source> + <source>Select a channel id</source> <translation>Valitse kanava-id</translation> </message> <message> - <source>Select a ChanNo</source> + <source>Select a channel number</source> <translation>Valitse kanavanumero</translation> </message> <message> + <source>Select a channel name</source> + <translation>Valitse kanavanimi</translation> + </message> + <message> + <source>Select a ChanID</source> + <translation type="obsolete">Valitse kanava-id</translation> + </message> + <message> + <source>Select a ChanNo</source> + <translation type="obsolete">Valitse kanavanumero</translation> + </message> + <message> <source>Select a Channel Name</source> - <translation>Valitse Kanavanimi</translation> + <translation type="obsolete">Valitse Kanavanimi</translation> </message> <message> <source>Select a Callsign</source> - <translation>Valitse Kutsumanimi</translation> + <translation>Valitse kutsumanimi</translation> </message> </context> <context> <name>LogViewer</name> <message> <source>Cancel</source> - <translation>Peruuta</translation> + <translation type="obsolete">Peru</translation> </message> <message> <source>Show Progress Log</source> @@ -112,14 +182,22 @@ <name>MythBurn</name> <message> <source>Cancel</source> - <translation>Peruuta</translation> + <translation type="obsolete">Peruuta</translation> </message> <message> <source>Using Cutlist</source> - <translation>Käyttää leikkauslistaa</translation> + <translation type="obsolete">Käyttää leikkauslistaa</translation> </message> <message> <source>Not Using Cutlist</source> + <translation type="obsolete">Ei käytä leikkauslistaa</translation> + </message> + <message> + <source>Using Cut List</source> + <translation>Käyttää leikkauslistaa</translation> + </message> + <message> + <source>Not Using Cut List</source> <translation>Ei käytä leikkauslistaa</translation> </message> <message> @@ -140,17 +218,25 @@ </message> <message> <source>Menu</source> [...11761 lines suppressed...] + <source>Browse Filesystem (slow)</source> + <translation>Selaa tiedostojärjestelmää (hidas)</translation> + </message> </context> <context> <name>VideoFilterDialog</name> @@ -19650,55 +20782,67 @@ Jos valitset "Käytä oletus toistinta," laajennoksen toistokomento j </message> </context> <context> + <name>VideoScanner</name> + <message> + <source>Failed to Scan SG Video Hosts</source> + <translation>SG video palveuiden skannaus epäonnistui</translation> + </message> + <message> + <source>If they no longer exist please remove them</source> + <translation>Jos palvelut on lopetettu, ole hyvä ja poista ne.</translation> + </message> +</context> +<context> <name>VideoSetupWizard</name> <message> - <source>Select from one of the preconfigured playback profiles. When satisfied, you can test Standard Definition and High Definition playback with your choice before moving on.</source> - <translation type="unfinished"></translation> + <source>Select from one of the preconfigured playback profiles. When satisfied, you can test Standard Definition and High Definition playback with the selected profile before moving on.</source> + <translation>Valitse joku esiasetetuista toistoprofiileista. Kun olet tyytyväinen, voit kokeilla vakio- ja teräväpiirto toistoa valitulla profiililla ennen kuin jatkat.</translation> </message> <message> - <source>Test your playback settings with Standard definition content. (480p)</source> - <translation type="unfinished"></translation> + <source>Test your playback settings with Standard Definition content. (480p)</source> + <translation>Kokeile toistoasetuksiasi vakiopiirto materiaalilla (480p)</translation> </message> <message> - <source>Test your playback settings with High definition content (1080p).</source> - <translation type="unfinished"></translation> + <source>Test your playback settings with High Definition content (1080p).</source> + <translation>Kokeile toistoasetuksiasi teräväpiirtomateriaalilla (1080p).</translation> </message> <message> <source>Save these changes and move on to the next configuration step.</source> - <translation type="unfinished"></translation> + <translation>Tallenna muutokset ja siirry seuraaviin asetuksiin.</translation> </message> <message> <source>Return to the previous configuration step.</source> - <translation type="unfinished"></translation> + <translation>Palaa edellisiin asetuksiin.</translation> </message> <message> <source>A short test of your system's playback of Standard Definition content with the %1 profile.</source> - <translation type="unfinished"></translation> + <translation>Testaa pikaisesti järjestelmäsi vakiopiirto (SD) materiaalin toisto %1 profiililla.</translation> </message> <message> <source>Standard Definition Playback Test</source> - <translation type="unfinished"></translation> + <translation>Kokeile vakiopiirtoa (SD)</translation> </message> <message> <source>A short test of your system's playback of High Definition content with the %1 profile.</source> - <translation type="unfinished"></translation> + <translation>Testaa pikaisesti järjestelmäsi teräväpiirto (HD) materiaalin toisto %1 profiililla.</translation> </message> <message> <source>High Definition Playback Test</source> - <translation type="unfinished"></translation> + <translation>Kokeile teräväpiirtoa (HD)</translation> </message> <message> <source>Downloading Video Sample...</source> - <translation type="unfinished"></translation> + <translation>Ladataan koevideota...</translation> </message> <message> <source>Downloading Video Sample... (%1 of %2 MB)</source> - <translation type="unfinished"></translation> + <translation>Ladataan koevideota... +(%1 / %2 Mt)</translation> </message> <message> <source>Error downloading sample to backend.</source> - <translation type="unfinished"></translation> + <translation>Virhe ladatessa koemateriaalia palvelimelle.</translation> </message> </context> <context> @@ -19823,15 +20967,15 @@ Jos valitset "Käytä oletus toistinta," laajennoksen toistokomento j </message> <message> <source>Cancel</source> - <translation>Peruuta</translation> + <translation type="obsolete">Peruuta</translation> </message> <message> <source>Upcoming by title</source> - <translation type="unfinished"></translation> + <translation>Tulevat nimikkeen mukaan</translation> </message> <message> <source>Upcoming scheduled</source> - <translation type="unfinished"></translation> + <translation>Tulevat ajastukset</translation> </message> </context> <context> diff --git a/mythtv/libs/libmyth/rssparse.h b/mythtv/libs/libmyth/rssparse.h index 7408ac4..dfe1427 100644 --- a/mythtv/libs/libmyth/rssparse.h +++ b/mythtv/libs/libmyth/rssparse.h @@ -13,6 +13,7 @@ using namespace std; #include <QPair> #include <QMap> #include <QVariant> +#include <sys/types.h> #include "mythexp.h" diff --git a/mythtv/libs/libmythbase/compat.h b/mythtv/libs/libmythbase/compat.h index ff2890f..425624a 100644 --- a/mythtv/libs/libmythbase/compat.h +++ b/mythtv/libs/libmythbase/compat.h @@ -44,6 +44,8 @@ # include <sys/resource.h> // for setpriority # include <sys/socket.h> # include <sys/wait.h> // For WIFEXITED on Mac OS X +# include <stdio.h> // for snprintf(), used by inline dlerror() +# include <unistd.h> // for usleep() #endif #ifdef USING_MINGW diff --git a/mythtv/libs/libmythtv/audioinput.h b/mythtv/libs/libmythtv/audioinput.h index 67f05d1..9155349 100644 --- a/mythtv/libs/libmythtv/audioinput.h +++ b/mythtv/libs/libmythtv/audioinput.h @@ -22,6 +22,7 @@ #define _AUDIOINPUT_H_ #include <QString> +#include <unistd.h> class AudioInput { diff --git a/mythtv/libs/libmythtv/tv_play.cpp b/mythtv/libs/libmythtv/tv_play.cpp index d1133c5..badcb03 100644 --- a/mythtv/libs/libmythtv/tv_play.cpp +++ b/mythtv/libs/libmythtv/tv_play.cpp @@ -456,7 +456,7 @@ bool TV::StartTV(ProgramInfo *tvrec, uint flags) } sendPlaybackEnd(); - GetMythMainWindow()->PauseIdleTimer(true); + GetMythMainWindow()->PauseIdleTimer(false); LOG(VB_PLAYBACK, LOG_INFO, LOC + "StartTV -- end"); @@ -7066,7 +7066,7 @@ void TV::ChangeChannel(PlayerContext *ctx, uint chanid, const QString &chan) bool getit = false; if (ctx->recorder) { - if ((ctx->pseudoLiveTVState == kPseudoRecording) || chanid) + if (ctx->pseudoLiveTVState == kPseudoRecording) { getit = true; } diff --git a/mythtv/programs/mythfrontend/guidegrid.cpp b/mythtv/programs/mythfrontend/guidegrid.cpp index 6dbf1aa..17d5fad 100644 --- a/mythtv/programs/mythfrontend/guidegrid.cpp +++ b/mythtv/programs/mythfrontend/guidegrid.cpp @@ -1390,11 +1390,11 @@ void GuideGrid::customEvent(QEvent *event) } else if (resultid == "guidemenu") { - if (resulttext == tr("Record")) + if (resulttext == tr("Record This")) { quickRecord(); } - else if (resulttext == tr("Change Channel")) + else if (resulttext == tr("Change to Channel")) { enter(); } diff --git a/mythtv/programs/mythutil/markuputils.cpp b/mythtv/programs/mythutil/markuputils.cpp index 94fc136..fee2df3 100644 --- a/mythtv/programs/mythutil/markuputils.cpp +++ b/mythtv/programs/mythutil/markuputils.cpp @@ -144,8 +144,8 @@ static int CopySkipListToCutList(const MythUtilCommandLineParser &cmdline) cutlist[it.key()] = MARK_CUT_END; pginfo.SaveCutList(cutlist); - cout << QString("Cutlist copied to Commercial Skip List\n") - .toLocal8Bit().constData(); + cout << "Commercial Skip List copied to Cutlist\n"; + LOG(VB_GENERAL, LOG_NOTICE, "Commercial Skip List copied to Cutlist"); return GENERIC_EXIT_OK; } mythtv_0.25_gcc_4.7.patch: h264_qpel_mmx.c | 8 !!!!!!!! 1 file changed, 8 modifications(!) --- NEW FILE mythtv_0.25_gcc_4.7.patch --- *** ./mythtv/external/FFmpeg/libavcodec/x86/h264_qpel_mmx.c.org 2012-03-31 20:52:29.923150437 -0400 --- ./mythtv/external/FFmpeg/libavcodec/x86/h264_qpel_mmx.c 2012-03-31 21:58:48.422270780 -0400 *************** *** 398,404 **** "2: \n\t"\ \ : "+a"(src), "+c"(dst)\ ! : "S"((x86_reg)srcStride), "D"((x86_reg)dstStride), "g"(h)\ : "memory"\ );\ src += 4-(h+5)*srcStride;\ --- 398,404 ---- "2: \n\t"\ \ : "+a"(src), "+c"(dst)\ ! : "S"((x86_reg)srcStride), "D"((x86_reg)dstStride), "rm"(h)\ : "memory"\ );\ src += 4-(h+5)*srcStride;\ *************** *** 446,452 **** QPEL_H264HV(%%mm3, %%mm4, %%mm5, %%mm0, %%mm1, %%mm2, 15*48)\ "2: \n\t"\ : "+a"(src)\ ! : "c"(tmp), "S"((x86_reg)srcStride), "g"(size)\ : "memory"\ );\ tmp += 4;\ --- 446,452 ---- QPEL_H264HV(%%mm3, %%mm4, %%mm5, %%mm0, %%mm1, %%mm2, 15*48)\ "2: \n\t"\ : "+a"(src)\ ! : "c"(tmp), "S"((x86_reg)srcStride), "rm"(size)\ : "memory"\ );\ tmp += 4;\ *************** *** 823,829 **** "2: \n\t"\ \ : "+a"(src), "+c"(dst)\ ! : "S"((x86_reg)srcStride), "D"((x86_reg)dstStride), "g"(h)\ : XMM_CLOBBERS("%xmm0", "%xmm1", "%xmm2", "%xmm3", \ "%xmm4", "%xmm5", "%xmm6", "%xmm7",)\ "memory"\ --- 823,829 ---- "2: \n\t"\ \ : "+a"(src), "+c"(dst)\ ! : "S"((x86_reg)srcStride), "D"((x86_reg)dstStride), "rm"(h)\ : XMM_CLOBBERS("%xmm0", "%xmm1", "%xmm2", "%xmm3", \ "%xmm4", "%xmm5", "%xmm6", "%xmm7",)\ "memory"\ *************** *** 878,884 **** QPEL_H264HV_XMM(%%xmm3, %%xmm4, %%xmm5, %%xmm0, %%xmm1, %%xmm2, 15*48) "2: \n\t" : "+a"(src) ! : "c"(tmp), "S"((x86_reg)srcStride), "g"(size) : XMM_CLOBBERS("%xmm0", "%xmm1", "%xmm2", "%xmm3", "%xmm4", "%xmm5", "%xmm6", "%xmm7",) "memory" --- 878,884 ---- QPEL_H264HV_XMM(%%xmm3, %%xmm4, %%xmm5, %%xmm0, %%xmm1, %%xmm2, 15*48) "2: \n\t" : "+a"(src) ! : "c"(tmp), "S"((x86_reg)srcStride), "rm"(size) : XMM_CLOBBERS("%xmm0", "%xmm1", "%xmm2", "%xmm3", "%xmm4", "%xmm5", "%xmm6", "%xmm7",) "memory" Index: mythtv.spec =================================================================== RCS file: /cvs/free/rpms/mythtv/devel/mythtv.spec,v retrieving revision 1.89 retrieving revision 1.90 diff -u -r1.89 -r1.90 --- mythtv.spec 2 Mar 2012 22:15:39 -0000 1.89 +++ mythtv.spec 13 Apr 2012 18:28:53 -0000 1.90 @@ -30,15 +30,10 @@ # and override RPM's defaults. # --with debug Enable debug mode # -# The following options are disabled by default. Use these options to enable: -# -# --with directfb Enable directfb support -# # The following options are enabled by default. Use these options to disable: # # --without vdpau Disable VDPAU support # --without crystalhd Disable Crystal HD support -# --without xvmc Disable XvMC support # --without perl Disable building of the perl bindings # --without python Disable building of the python bindings # @@ -51,7 +46,6 @@ # --without mythmusic # --without mythnetvision # --without mythnews -# --without mythvideo # --without mythweather # --without mythzoneminder # --without mythweb @@ -70,13 +64,13 @@ %define _gitrev 40f3bae # Mythtv and plugins from github.com -%global githash1 g4627dc9 -%global githash2 c239b59 +%global githash1 g1f5962a +%global githash2 9615da9 # Mythweb from github.com -%global githash3 g946deb7 -%global githash4 28a6e31 +%global githash3 g1d056f7 +%global githash4 0fc49a5 -%define branch fixes/0.24 +%define branch fixes/0.25 # # Basic descriptive tags for this package: @@ -87,12 +81,12 @@ Group: Applications/Multimedia # Version/Release info -Version: 0.24.2 +Version: 0.25 %if "%{branch}" == "master" Release: 0.1.git.%{_gitrev}%{?dist} #Release: 0.1.rc1%{?dist} %else -Release: 2%{?dist} +Release: 1%{?dist} %endif # The primary license is GPLv2+, but bits are borrowed from a number of @@ -112,6 +106,7 @@ # The following options are enabled by default. Use --without to disable them %define with_vdpau %{?_without_vdpau: 0} %{?!_without_vdpau: 1} +%define with_vaapi %{?_without_vaapi: 0} %{?!_without_vaapi: 1} %if 0%{?rhel} %define with_crystalhd %{?_without_crystalhd: 1} %{?!_without_crystalhd: 0} @@ -119,13 +114,11 @@ %define with_crystalhd %{?_without_crystalhd: 0} %{?!_without_crystalhd: 1} %endif -%define with_xvmc %{?_without_xvmc: 0} %{?!_without_xvmc: 1} %define with_perl %{?_without_perl: 0} %{!?_without_perl: 1} +%define with_php %{?_without_php: 0} %{!?_without_php: 1} %define with_python %{?_without_python: 0} %{!?_without_python: 1} %define with_pulseaudio %{?_without_pulseaudio: 0} %{!?_without_pulseaudio: 1} -# The following options are disabled by default. Use --with to enable them -%define with_directfb %{?_with_directfb: 1} %{!?_with_directfb: 0} # FAAC is non-free, so we disable it by default %define with_faac %{?_with_faac: 1} %{?!_with_faac: 0} @@ -137,7 +130,6 @@ %define with_mythgame %{?_without_mythgame: 0} %{!?_without_mythgame: 1} %define with_mythmusic %{?_without_mythmusic: 0} %{!?_without_mythmusic: 1} %define with_mythnews %{?_without_mythnews: 0} %{!?_without_mythnews: 1} -%define with_mythvideo %{?_without_mythvideo: 0} %{!?_without_mythvideo: 1} %define with_mythweather %{?_without_mythweather: 0} %{!?_without_mythweather: 1} %define with_mythweb %{?_without_mythweb: 0} %{!?_without_mythweb: 1} %define with_mythzoneminder %{?_without_mythzoneminder: 0} %{!?_without_mythzoneminder: 1} @@ -145,11 +137,14 @@ ################################################################################ +# https://github.com/MythTV/mythtv/tarball/v0.25 Source0: MythTV-%{name}-v%{version}-0-%{githash1}.tar.gz +# https://github.com/MythTV/mythweb/tarball/v0.25 Source1: MythTV-mythweb-v%{version}-0-%{githash3}.tar.gz -Patch0: mythtv-%{version}-fixes.patch + +Patch0: mythtv-0.25-fixes.patch #Patch1: mythplugins-%{version}-fixes.patch -Patch2: mythtv-0.24.2-gcc47.patch +Patch2: mythtv_0.25_gcc_4.7.patch Source10: PACKAGE-LICENSING Source101: mythbackend.sysconfig @@ -165,16 +160,6 @@ Source401: mythweb.conf -################################################################################ -# Python setup - -#%if %{with_python} -#%{!?python_sitelib: %define python_sitelib %(%{__python} -c "from distutils.sysconfig import get_python_lib; print get_python_lib()")} -#%{!?python_version: %define python_version %(%{__python} -c 'import sys; print sys.version.split(" ")[0]')} -#%endif - -################################################################################ - # Global MythTV and Shared Build Requirements %if 0%{?fedora} >= 16 @@ -198,7 +183,7 @@ BuildRequires: gcc-c++ BuildRequires: mysql-devel >= 5 BuildRequires: qt-webkit-devel -BuildRequires: qt-devel >= 4.4 +BuildRequires: qt-devel >= 4.6 BuildRequires: phonon-devel BuildRequires: lm_sensors-devel @@ -233,18 +218,19 @@ BuildRequires: libdvdread-devel >= 0.9.4 BuildRequires: libcdio-devel # nb: libdvdcss will be dynamically loaded if installed -BuildRequires: libfame-devel >= 0.9.0 +#BuildRequires: libfame-devel >= 0.9.0 BuildRequires: libogg-devel BuildRequires: libtheora-devel BuildRequires: libvorbis-devel >= 1.0 BuildRequires: mjpegtools-devel >= 1.6.1 -BuildRequires: taglib-devel >= 1.5 +BuildRequires: taglib-devel >= 1.6 # Is transcode really a BR? #BuildRequires: transcode >= 0.6.8 BuildRequires: x264-devel BuildRequires: xvidcore-devel >= 0.9.1 # Audio framework support +BuildRequires: sox-devel BuildRequires: alsa-lib-devel BuildRequires: arts-devel BuildRequires: jack-audio-connection-kit-devel @@ -252,6 +238,13 @@ BuildRequires: pulseaudio-libs-devel %endif +# Bluray support +BuildRequires: libxml2-devel +#BuildRequires: libudf-devel + +# Subtitle support +BuildRequires: libass-devel + # Need dvb headers to build in dvb support BuildRequires: kernel-headers @@ -260,14 +253,14 @@ BuildRequires: libiec61883-devel BuildRequires: libraw1394-devel -%if %{with_directfb} -BuildRequires: directfb-devel -%endif - %if %{with_vdpau} BuildRequires: libvdpau-devel %endif +%if %{with_vaapi} +BuildRequires: libva-devel +%endif + %if %{with_crystalhd} BuildRequires: libcrystalhd-devel %endif @@ -286,11 +279,18 @@ BuildRequires: perl(HTTP::Request) BuildRequires: perl(Net::UPnP::QueryResponse) BuildRequires: perl(Net::UPnP::ControlPoint) +BuildRequires: perl(DBD::mysql) +BuildRequires: perl(IO::Socket::INET6) +%endif + +%if %{with_php} +# No php specific requirements yet. %endif %if %{with_python} BuildRequires: python-devel BuildRequires: MySQL-python +BuildRequires: python-urlgrabber %endif # Plugin Build Requirements @@ -305,21 +305,11 @@ BuildRequires: zlib-devel %endif -%if %{with_mythmusic} -BuildRequires: libcdaudio-devel >= 0.99.6 -BuildRequires: cdparanoia-devel -BuildRequires: libvisual-devel -BuildRequires: SDL-devel -%endif - %if %{with_mythnews} %endif BuildRequires: ncurses-devel -%if %{with_mythvideo} -Requires: perl(XML::Simple) -%endif %if %{with_mythweather} Requires: mythweather >= %{version} @@ -416,7 +406,7 @@ Requires: freetype >= 2 Requires: lame -Requires: qt4 >= 4.4 +Requires: qt4 >= 4.6 Requires: qt4-MySQL %description libs @@ -436,7 +426,7 @@ Requires: freetype-devel >= 2 Requires: mysql-devel >= 5 -Requires: qt4-devel >= 4.4 +Requires: qt4-devel >= 4.6 Requires: lm_sensors-devel Requires: lirc-devel @@ -488,14 +478,14 @@ Requires: libiec61883-devel Requires: libraw1394-devel -%if %{with_directfb} -Requires: directfb-devel -%endif - %if %{with_vdpau} Requires: libvdpau-devel %endif +%if %{with_vaapi} +Requires: libva-devel +%endif + %if %{with_crystalhd} Requires: libcrystalhd-devel %endif @@ -526,6 +516,7 @@ Summary: Client component of mythtv (a DVR) Group: Applications/Multimedia Requires: freetype, lame +Requires: perl(XML::Simple) Requires: mythtv-common = %{version}-%{release} Requires: mythtv-base-themes = %{version} Provides: mythtv-frontend-api = %{mythfeapiver} @@ -548,7 +539,6 @@ Group: Applications/Multimedia Requires: lame Requires: mythtv-common = %{version}-%{release} -Requires: wget Requires(pre): shadow-utils Conflicts: xmltv-grabbers < 0.5.37 @@ -569,7 +559,6 @@ Requires: freetype Requires: mythtv-backend = %{version}-%{release} Requires: mythtv-base-themes = %{version} -Requires: wget %description setup MythTV provides a unified graphical interface for recording and viewing @@ -621,6 +610,21 @@ ################################################################################ +%if %{with_php} + +%package -n php-MythTV +Summary: PHP bindings for MythTV +Group: Development/Languages +# Wish we could do this: +#BuildArch: noarch + +%description -n php-MythTV +Provides a PHP-based interface to interacting with MythTV. + +%endif + +################################################################################ + %if %{with_python} %package -n python-MythTV @@ -648,7 +652,6 @@ Group: Applications/Multimedia Requires: mythmusic = %{version}-%{release} -Requires: mythvideo = %{version}-%{release} Requires: mythweather = %{version}-%{release} Requires: mythgallery = %{version}-%{release} Requires: mythgame = %{version}-%{release} @@ -756,32 +759,6 @@ %endif ################################################################################ -%if %{with_mythvideo} - -%package -n mythvideo -Summary: A generic video player frontend module for MythTV -Group: Applications/Multimedia -Requires: mythtv-frontend-api = %{mythfeapiver} -Requires: mplayer -Requires: transcode >= 0.6.8 -Requires: python-imdb -Requires: python-MythTV = %{version}-%{release} - -Provides: mythdvd = %{version}-%{release} -Obsoletes: mythdvd < %{version}-%{release} - -%description -n mythvideo -MythVideo is a MythTV module that allows you to play videos, DVDs and -(optionally) VCDs. It can also be configured to let you rip DVDs and -transcode their video and audio content to other (generally smaller) -formats. The player can either use the MythTV internal software (which -now supports DVD menus), or simply to invoke your favorite DVD/XVCD -playing software (mplayer, ogle, xine, etc) as an external -command. The transcoding is based on and derived from the excellent -transcode package. - -%endif -################################################################################ %if %{with_mythweather} %package -n mythweather @@ -902,7 +879,7 @@ # chmod 644 settings.pro # We also need Xv libs to build XvMCNVIDIA - sed -i -e 's,VENDOR_XVMC_LIBS="-lXvMCNVIDIA",VENDOR_XVMC_LIBS="-lXvMCNVIDIA -lXv",' configure +# sed -i -e 's,VENDOR_XVMC_LIBS="-lXvMCNVIDIA",VENDOR_XVMC_LIBS="-lXvMCNVIDIA -lXv",' configure # On to mythplugins popd @@ -911,20 +888,20 @@ ##### MythPlugins %if %{with_plugins} -pushd mythplugins +#pushd mythplugins # Fix /mnt/store -> /var/lib/mythmusic - cd mythmusic - sed -i -e's,/mnt/store/music,%{_localstatedir}/lib/mythmusic,' mythmusic/globalsettings.cpp - cd .. +# cd mythmusic +# sed -i -e's,/mnt/store/music,%{_localstatedir}/lib/mythmusic,' mythmusic/globalsettings.cpp +# cd .. # Fix /mnt/store -> /var/lib/mythvideo - cd mythvideo - sed -i -e 's,/share/Movies/dvd,%{_localstatedir}/lib/mythvideo,' mythvideo/globalsettings.cpp - cd .. +# cd mythvideo +# sed -i -e 's,/share/Movies/dvd,%{_localstatedir}/lib/mythvideo,' mythvideo/globalsettings.cpp +# cd .. # And back to the compile root -popd +#popd @@ -956,8 +933,7 @@ --enable-libfftw3 \ --enable-x11 --x11-path=%{_includedir} \ --enable-xv \ - --enable-xvmc-vld \ - --enable-opengl-video --enable-opengl-vsync \ + --enable-opengl-video \ --enable-xrandr \ --enable-lirc \ --enable-ivtv \ @@ -967,25 +943,24 @@ --enable-libfaac --enable-nonfree \ %endif --enable-libmp3lame \ + --enable-libx264 \ --enable-libtheora --enable-libvorbis \ --enable-libxvid \ %if %{with_vdpau} --enable-vdpau \ %endif +%if %{with_vaapi} + --enable-vaapi \ +%endif %if %{with_crystalhd} --enable-crystalhd \ %endif -%if !%{with_xvmc} - --disable-xvmcw \ -%endif -%if %{with_directfb} - --enable-directfb \ -%else - --disable-directfb \ -%endif %if !%{with_perl} --without-bindings=perl \ %endif +%if !%{with_php} + --without-bindings=php \ +%endif %if !%{with_python} --without-bindings=python \ %endif @@ -1075,11 +1050,6 @@ %else --disable-mythnews \ %endif - %if %{with_mythvideo} - --enable-mythvideo \ - %else - --disable-mythvideo \ - %endif %if %{with_mythweather} --enable-mythweather \ %else @@ -1096,9 +1066,8 @@ --disable-mythnetvision \ %endif --enable-opengl \ - --enable-libvisual \ --enable-fftw \ - --enable-sdl +# --enable-sdl make %{?_smp_mflags} @@ -1119,6 +1088,7 @@ ln -s mythtv-setup %{buildroot}%{_bindir}/mythtvsetup mkdir -p %{buildroot}%{_localstatedir}/lib/mythtv + mkdir -p %{buildroot}%{_localstatedir}/lib/mythvideo mkdir -p %{buildroot}%{_localstatedir}/cache/mythtv mkdir -p %{buildroot}%{_localstatedir}/log/mythtv mkdir -p %{buildroot}%{_sysconfdir}/logrotate.d @@ -1178,9 +1148,6 @@ %if %{with_mythmusic} mkdir -p %{buildroot}%{_localstatedir}/lib/mythmusic %endif -%if %{with_mythvideo} - mkdir -p %{buildroot}%{_localstatedir}/lib/mythvideo -%endif %if %{with_mythgallery} mkdir -p %{buildroot}%{_localstatedir}/lib/pictures %endif @@ -1296,8 +1263,9 @@ %doc mythtv/COPYING %doc mythtv/FAQ %doc mythtv/database mythtv/keys.txt -%doc mythtv/docs/*.html mythtv/docs/*.png -%doc mythtv/docs/*.txt +# Do we really need the API documentation? +#%doc mythtv/docs/*.html mythtv/docs/*.png +#%doc mythtv/docs/*.txt %doc mythtv/PACKAGE-LICENSING %doc mythtv/contrib @@ -1306,20 +1274,27 @@ %dir %{_datadir}/mythtv %config(noreplace) %{_sysconfdir}/mythtv/mysql.txt %config(noreplace) %{_sysconfdir}/mythtv/config.xml +%{_bindir}/mythccextractor %{_bindir}/mythcommflag +%{_bindir}/mythmetadatalookup +%{_bindir}/mythutil %{_bindir}/mythpreviewgen %{_bindir}/mythtranscode %{_bindir}/mythwikiscripts %{_datadir}/mythtv/mythconverg*.pl %{_datadir}/mythtv/locales/ +%{_datadir}/mythtv/metadata/ +%{_datadir}/mythtv/hardwareprofile/ %files backend %{_bindir}/mythbackend %{_bindir}/mythfilldatabase %{_bindir}/mythjobqueue +%{_bindir}/mythmediaserver %{_bindir}/mythreplex %{_bindir}/mythffmpeg %{_datadir}/mythtv/MXML_scpd.xml +%{_datadir}/mythtv/backend-config/ %attr(-,mythtv,mythtv) %dir %{_localstatedir}/lib/mythtv %attr(-,mythtv,mythtv) %dir %{_localstatedir}/cache/mythtv %if 0%{?fedora} >=16 @@ -1332,6 +1307,7 @@ %config(noreplace) %{_sysconfdir}/logrotate.d/mythbackend %attr(-,mythtv,mythtv) %dir %{_localstatedir}/log/mythtv %{_datadir}/mythtv/internetcontent/ +%{_datadir}/mythtv/html/ %files setup %{_bindir}/mythtv-setup @@ -1340,7 +1316,6 @@ %{_datadir}/applications/*mythtv-setup.desktop %files frontend -%defattr(-,root,root,-) %{_datadir}/mythtv/CDS_scpd.xml %{_datadir}/mythtv/CMGR_scpd.xml %{_datadir}/mythtv/MFEXML_scpd.xml @@ -1350,11 +1325,10 @@ %{_datadir}/mythtv/setup.xml %{_bindir}/mythavtest %{_bindir}/mythfrontend -%{_bindir}/mythtvosd +#%%{_bindir}/mythmessage %{_bindir}/mythlcdserver %{_bindir}/mythshutdown %{_bindir}/mythwelcome -%{_bindir}/mythffplay %dir %{_libdir}/mythtv %dir %{_libdir}/mythtv/filters %{_libdir}/mythtv/filters/* @@ -1367,6 +1341,8 @@ %{_datadir}/applications/*mythfrontend.desktop %{_datadir}/pixmaps/myth*.png %{_datadir}/mythtv/metadata/ +# Myth Video is now Video Gallery +%attr(-,mythtv,mythtv) %{_localstatedir}/lib/mythvideo %files base-themes %{_datadir}/mythtv/themes/ @@ -1392,6 +1368,11 @@ %exclude %{perl_vendorarch}/auto/MythTV/.packlist %endif +%if %{with_php} +%files -n php-MythTV +%{_datadir}/mythtv/bindings/php/* +%endif + %if %{with_python} %files -n python-MythTV %{_bindir}/mythpython @@ -1471,18 +1452,6 @@ %{_datadir}/mythtv/i18n/mythnews_*.qm %endif -%if %{with_mythvideo} -%files -n mythvideo -%doc mythplugins/mythvideo/COPYING -%doc mythplugins/mythvideo/README* -%{_libdir}/mythtv/plugins/libmythvideo.so -%{_datadir}/mythtv/mythvideo -%{_datadir}/mythtv/i18n/mythvideo_*.qm -%{_datadir}/mythtv/video_settings.xml -%{_datadir}/mythtv/videomenu.xml -%attr(-,mythtv,mythtv) %{_localstatedir}/lib/mythvideo -%endif - %if %{with_mythweather} %files -n mythweather %doc mythplugins/mythweather/AUTHORS @@ -1529,6 +1498,9 @@ ################################################################################ %changelog +* Tue Mar 20 2012 Richard Shaw <hobbes1069(a)gmail.com> - 0.25-1 +- Update to latest release 0.25. + * Fri Mar 03 2012 Richard Shaw <hobbes1069(a)gmail.com> - 0.24.2-2 - Remove transcode as build requirement. - Misc. spec file cleanup. --- mythtv-0.24.2-fixes.patch DELETED --- --- mythtv-0.24.2-gcc47.patch DELETED ---

12 years, 7 months

1
0
0 / 0

rpms/realcrypt/devel noexecstack.patch, NONE, 1.1 realcrypt-7.1a-rebranding.patch, NONE, 1.1 realcrypt.spec, 1.19, 1.20 sources, 1.8, 1.9 realcrypt-7.0a-rebranding.patch, 1.2, NONE

by Leigh Scott

Author: leigh123linux Update of /cvs/nonfree/rpms/realcrypt/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv15272 Modified Files: realcrypt.spec sources Added Files: noexecstack.patch realcrypt-7.1a-rebranding.patch Removed Files: realcrypt-7.0a-rebranding.patch Log Message: * Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 - update to 7.1a - harden build noexecstack.patch: Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- NEW FILE noexecstack.patch --- --- truecrypt-7.1a-source/Makefile 2012-02-07 10:36:48.000000000 +0000 +++ truecrypt-7.1a-source/Makefile 2012-04-13 15:51:19.007700207 +0100 @@ -39,7 +39,7 @@ export CFLAGS := -Wall export CXXFLAGS := -Wall -Wno-unused-parameter C_CXX_FLAGS := -MMD -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES -I$(BASE_DIR) -I$(BASE_DIR)/Crypto export ASFLAGS := -Ox -D __GNUC__ -export LFLAGS := +export LFLAGS := -Wl,-z,noexecstack export PKG_CONFIG_PATH ?= /usr/local/lib/pkgconfig realcrypt-7.1a-rebranding.patch: Common/Language.xml | 638 ++++++------ Main/CommandLineInterface.cpp | 2 truecrypt-7.0a-source/Common/Tcdefs.h | 10 truecrypt-7.0a-source/Core/Unix/CoreService.cpp | 2 truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp | 8 truecrypt-7.0a-source/Core/Unix/CoreUnix.h | 2 truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp | 4 truecrypt-7.0a-source/Driver/Fuse/FuseService.h | 2 truecrypt-7.0a-source/Main/Application.h | 2 truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp | 4 truecrypt-7.0a-source/Main/Forms/Forms.cpp | 18 truecrypt-7.0a-source/Main/Forms/Forms.h | 14 truecrypt-7.0a-source/Main/Forms/MainFrame.cpp | 2 truecrypt-7.0a-source/Main/Forms/MainFrame.h | 2 truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp | 2 truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp | 2 truecrypt-7.0a-source/Main/LanguageStrings.cpp | 20 truecrypt-7.0a-source/Main/UserInterface.cpp | 42 truecrypt-7.0a-source/Makefile | 2 truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp | 4 truecrypt-7.1a-source/Main/GraphicUserInterface.cpp | 51 21 files changed, 397 insertions(+), 436 deletions(-) --- NEW FILE realcrypt-7.1a-rebranding.patch --- --- truecrypt-7.1a-source.orig//Common/Language.xml +++ truecrypt-7.1a-source/Common/Language.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="utf-8"?> -<TrueCrypt> +<RealCrypt> <localization prog-version="7.1a">  <language langid="en" name="English" en-name="English" version="0.0.0" translators="" /> @@ -12,21 +12,21 @@ <control lang="en" key="IDCANCEL">Cancel</control> <control lang="en" key="IDC_ALL_USERS">Install &for all users</control> <control lang="en" key="IDC_BROWSE">Bro&wse...</control> - <control lang="en" key="IDC_DESKTOP_ICON">Add TrueCrypt icon to &desktop</control> + <control lang="en" key="IDC_DESKTOP_ICON">Add RealCrypt icon to &desktop</control> <control lang="en" key="IDC_DONATE">Donate now...</control> - <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with TrueCrypt</control> + <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with RealCrypt</control> <control lang="en" key="IDC_OPEN_CONTAINING_FOLDER">&Open the destination location when finished</control> - <control lang="en" key="IDC_PROG_GROUP">Add TrueCrypt to &Start menu</control> + <control lang="en" key="IDC_PROG_GROUP">Add RealCrypt to &Start menu</control> <control lang="en" key="IDC_SYSTEM_RESTORE">Create System &Restore point</control> <control lang="en" key="IDC_UNINSTALL">&Uninstall</control> <control lang="en" key="IDC_WIZARD_MODE_EXTRACT_ONLY">&Extract</control> <control lang="en" key="IDC_WIZARD_MODE_INSTALL">&Install</control> - <control lang="en" key="IDD_INSTL_DLG">TrueCrypt Setup Wizard</control> - <control lang="en" key="IDD_UNINSTALL">Uninstall TrueCrypt</control> + <control lang="en" key="IDD_INSTL_DLG">RealCrypt Setup Wizard</control> + <control lang="en" key="IDD_UNINSTALL">Uninstall RealCrypt</control> <control lang="en" key="IDHELP">&Help</control> <control lang="en" key="IDT_EXTRACT_DESTINATION">Please select or type the location where you want to place the extracted files:</control> - <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the TrueCrypt program files. If the specified folder does not exist, it will be automatically created.</control> - <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove TrueCrypt from this system.</control> + <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the RealCrypt program files. If the specified folder does not exist, it will be automatically created.</control> + <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove RealCrypt from this system.</control> <control lang="en" key="IDC_ABORT_BUTTON">Abort</control> <control lang="en" key="IDC_BENCHMARK">&Benchmark</control> <control lang="en" key="IDC_CIPHER_TEST">&Test</control> @@ -38,7 +38,7 @@ <control lang="en" key="IDC_FILE_CONTAINER">Create an encrypted file container</control> <control lang="en" key="IDC_GB">&GB</control> <control lang="en" key="IDC_HIDDEN_SYSENC_INFO_LINK">More information</control> - <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden TrueCrypt volume </control> + <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden RealCrypt volume </control> <control lang="en" key="IDC_HIDDEN_VOL_HELP">More information about hidden volumes</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_DIRECT">Direct mode</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_FULL">Normal mode</control> @@ -60,13 +60,13 @@ <control lang="en" key="IDC_SHOW_PASSWORD">&Display password</control> <control lang="en" key="IDC_SHOW_PASSWORD_SINGLE">&Display password</control> <control lang="en" key="IDC_SINGLE_BOOT">Single-boot</control> - <control lang="en" key="IDC_STD_VOL">Standard TrueCrypt volume</control> + <control lang="en" key="IDC_STD_VOL">Standard RealCrypt volume</control> <control lang="en" key="IDC_SYSENC_HIDDEN">Hi&dden</control> <control lang="en" key="IDC_SYSENC_NORMAL">Normal</control> <control lang="en" key="IDC_SYS_DEVICE">Encrypt the system partition or entire system drive</control> <control lang="en" key="IDC_SYS_PARTITION">Encrypt the Windows system partition</control> <control lang="en" key="IDC_WHOLE_SYS_DRIVE">Encrypt the whole drive</control> - <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDT_CLUSTER">Cluster </control> <control lang="en" key="IDT_COLLECTING_RANDOM_DATA_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Next to continue.</control> <control lang="en" key="IDT_CONFIRM">&Confirm:</control> @@ -96,8 +96,8 @@ <control lang="en" key="IDCLOSE">Close</control> <control lang="en" key="IDC_ALLOW_ESC_PBA_BYPASS">Allow pre-boot &authentication to be bypassed by pressing the Esc key (enables boot manager)</control> <control lang="en" key="IDC_AUTORUN_DISABLE">Do nothing</control> - <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount TrueCrypt volume (specified below)</control> - <control lang="en" key="IDC_AUTORUN_START">&Start TrueCrypt</control> + <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount RealCrypt volume (specified below)</control> + <control lang="en" key="IDC_AUTORUN_START">&Start RealCrypt</control> <control lang="en" key="IDC_AUTO_DETECT_PKCS11_MODULE">Auto-&Detect Library</control> <control lang="en" key="IDC_BOOT_LOADER_CACHE_PASSWORD">&Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)</control> <control lang="en" key="IDC_BROWSE_DIRS">Browse...</control> @@ -105,7 +105,7 @@ <control lang="en" key="IDC_CACHE">Cache passwords and keyfil&es in memory</control> <control lang="en" key="IDC_CLOSE_BKG_TASK_WHEN_NOVOL">Exit when there are no mounted volumes</control> <control lang="en" key="IDC_CLOSE_TOKEN_SESSION_AFTER_MOUNT">&Close token session (log out) after a volume is successfully mounted</control> - <control lang="en" key="IDC_COPY_WIZARD">Include TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDC_COPY_WIZARD">Include RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDC_CREATE">Create</control> <control lang="en" key="IDC_CREATE_VOLUME">&Create Volume</control> <control lang="en" key="IDC_DISABLE_BOOT_LOADER_OUTPUT">Do not &show any texts in the pre-boot authentication screen (except the below custom message)</control> @@ -148,8 +148,8 @@ <control lang="en" key="IDC_PREF_DISMOUNT_POWERSAVING">Entering power saving mode</control> <control lang="en" key="IDC_PREF_DISMOUNT_SCREENSAVER">Screen saver is launched</control> <control lang="en" key="IDC_PREF_FORCE_AUTO_DISMOUNT">Force auto-dismount even if volume contains open files or directories</control> - <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted TrueCrypt volumes</control> - <control lang="en" key="IDC_PREF_LOGON_START">Start TrueCrypt Background Task</control> + <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted RealCrypt volumes</control> + <control lang="en" key="IDC_PREF_LOGON_START">Start RealCrypt Background Task</control> <control lang="en" key="IDC_PREF_MOUNT_READONLY">Mount volumes as read-only</control> <control lang="en" key="IDC_PREF_MOUNT_REMOVABLE">Mount volumes as removable media</control> <control lang="en" key="IDC_PREF_OPEN_EXPLORER">Open Explorer window for successfully mounted volume</control> @@ -169,17 +169,17 @@ <control lang="en" key="IDC_VOLUME_PROPERTIES">&Volume Properties...</control> <control lang="en" key="IDC_VOLUME_TOOLS">Volume &Tools...</control> <control lang="en" key="IDC_WIPE_CACHE">&Wipe Cache</control> - <control lang="en" key="IDD_FAVORITE_VOLUMES">TrueCrypt - Favorite Volumes</control> - <control lang="en" key="IDD_HOTKEYS_DLG">TrueCrypt - System-Wide Hot Keys</control> - <control lang="en" key="IDD_MOUNT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_FAVORITE_VOLUMES">RealCrypt - Favorite Volumes</control> + <control lang="en" key="IDD_HOTKEYS_DLG">RealCrypt - System-Wide Hot Keys</control> + <control lang="en" key="IDD_MOUNT_DLG">RealCrypt</control> <control lang="en" key="IDD_PASSWORDCHANGE_DLG">Change Password or Keyfiles</control> - <control lang="en" key="IDD_PASSWORD_DLG">Enter TrueCrypt Volume Password</control> - <control lang="en" key="IDD_PERFORMANCE_SETTINGS">TrueCrypt - Performance Options</control> - <control lang="en" key="IDD_PREFERENCES_DLG">TrueCrypt - Preferences</control> - <control lang="en" key="IDD_SYSENC_SETTINGS">TrueCrypt - System Encryption Settings</control> - <control lang="en" key="IDD_TOKEN_PREFERENCES">TrueCrypt - Security Token Preferences</control> - <control lang="en" key="IDD_TRAVELER_DLG">TrueCrypt Traveler Disk Setup</control> - <control lang="en" key="IDD_VOLUME_PROPERTIES">TrueCrypt Volume Properties</control> + <control lang="en" key="IDD_PASSWORD_DLG">Enter RealCrypt Volume Password</control> + <control lang="en" key="IDD_PERFORMANCE_SETTINGS">RealCrypt - Performance Options</control> + <control lang="en" key="IDD_PREFERENCES_DLG">RealCrypt - Preferences</control> + <control lang="en" key="IDD_SYSENC_SETTINGS">RealCrypt - System Encryption Settings</control> + <control lang="en" key="IDD_TOKEN_PREFERENCES">RealCrypt - Security Token Preferences</control> + <control lang="en" key="IDD_TRAVELER_DLG">RealCrypt Traveler Disk Setup</control> + <control lang="en" key="IDD_VOLUME_PROPERTIES">RealCrypt Volume Properties</control> <control lang="en" key="IDM_ABOUT">About</control> <control lang="en" key="IDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume...</control> <control lang="en" key="IDM_ADD_VOLUME_TO_FAVORITES">Add Mounted Volume to Favorites...</control> @@ -241,7 +241,7 @@ <control lang="en" key="IDM_VERSION_HISTORY">Version History</control> <control lang="en" key="IDM_VOLUME_PROPERTIES">Volume Properties</control> <control lang="en" key="IDM_VOLUME_WIZARD">Volume Creation Wizard</control> - <control lang="en" key="IDM_WEBSITE">TrueCrypt Website</control> + <control lang="en" key="IDM_WEBSITE">RealCrypt Website</control> <control lang="en" key="IDM_WIPE_CACHE">Wipe Cached Passwords</control> <control lang="en" key="IDOK">OK</control> <control lang="en" key="IDT_ACCELERATION_OPTIONS">Hardware Acceleration</control> @@ -270,8 +270,8 @@ <control lang="en" key="IDT_PKCS5_PRF">PKCS-5 PRF:</control> <control lang="en" key="IDT_PW_CACHE_OPTIONS">Password Cache</control> <control lang="en" key="IDT_SECURITY_OPTIONS">Security Options</control> - <control lang="en" key="IDT_TASKBAR_ICON">TrueCrypt Background Task</control> - <control lang="en" key="IDT_TRAVELER_MOUNT">TrueCrypt volume to mount (relative to traveler disk root):</control> + <control lang="en" key="IDT_TASKBAR_ICON">RealCrypt Background Task</control> + <control lang="en" key="IDT_TRAVELER_MOUNT">RealCrypt volume to mount (relative to traveler disk root):</control> <control lang="en" key="IDT_TRAVEL_INSERTION">Upon insertion of traveler disk: </control> <control lang="en" key="IDT_TRAVEL_ROOT">Create traveler disk files at (traveler disk root directory):</control> <control lang="en" key="IDT_VOLUME">Volume</control> @@ -306,18 +306,18 @@ <control lang="en" key="IDC_TOKEN_FILES_ADD">Add &Token Files...</control> <control lang="en" key="IDC_USE_EMBEDDED_HEADER_BAK">Use backup header embedded in &volume if available</control> <control lang="en" key="IDC_XTS_MODE_ENABLED">XTS mode</control> - <control lang="en" key="IDD_ABOUT_DLG">About TrueCrypt</control> - <control lang="en" key="IDD_BENCHMARK_DLG">TrueCrypt - Encryption Algorithm Benchmark</control> - <control lang="en" key="IDD_CIPHER_TEST_DLG">TrueCrypt - Test Vectors</control> + <control lang="en" key="IDD_ABOUT_DLG">About RealCrypt</control> + <control lang="en" key="IDD_BENCHMARK_DLG">RealCrypt - Encryption Algorithm Benchmark</control> + <control lang="en" key="IDD_CIPHER_TEST_DLG">RealCrypt - Test Vectors</control> <control lang="en" key="IDD_COMMANDHELP_DLG">Command Line Help</control> - <control lang="en" key="IDD_KEYFILES">TrueCrypt - Keyfiles</control> - <control lang="en" key="IDD_KEYFILE_GENERATOR">TrueCrypt - Keyfile Generator</control> - <control lang="en" key="IDD_LANGUAGE">TrueCrypt - Language</control> - <control lang="en" key="IDD_MOUNT_OPTIONS">TrueCrypt - Mount Options</control> + <control lang="en" key="IDD_KEYFILES">RealCrypt - Keyfiles</control> + <control lang="en" key="IDD_KEYFILE_GENERATOR">RealCrypt - Keyfile Generator</control> + <control lang="en" key="IDD_LANGUAGE">RealCrypt - Language</control> + <control lang="en" key="IDD_MOUNT_OPTIONS">RealCrypt - Mount Options</control> <control lang="en" key="IDD_NEW_TOKEN_KEYFILE">New Security Token Keyfile Properties</control> - <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">TrueCrypt - Random Pool Enrichment</control> + <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">RealCrypt - Random Pool Enrichment</control> <control lang="en" key="IDD_RAWDEVICES_DLG">Select a Partition or Device</control> - <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">RealCrypt</control> <control lang="en" key="IDD_TOKEN_KEYFILES">Security Token Keyfiles</control> <control lang="en" key="IDD_TOKEN_PASSWORD">Security token password/PIN required</control> <control lang="en" key="IDT_ACTIVE_LANG_PACK">Active language pack</control> @@ -359,15 +359,15 @@ <string lang="en" key="ACCESSMODEFAIL">The read-only attribute on your old volume could not be changed. Please check the file access permissions.</string> <string lang="en" key="ACCESS_DENIED">Error: Access denied.\n\nThe partition you are trying to access is either 0 sectors long, or it is the boot device.</string> <string lang="en" key="ADMINISTRATOR">Administrator</string> - <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the TrueCrypt driver, you need to be logged into an account with administrator privileges.</string> + <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the RealCrypt driver, you need to be logged into an account with administrator privileges.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_DEVICES">Please note that in order to encrypt/format a partition/device you need to be logged into an account with administrator privileges.\n\nThis does not apply to file-hosted volumes.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_HIDVOL">In order to create a hidden volume you need to be logged into an account with administrator privileges.\n\nContinue?</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_NTFS">Please note that in order to format the volume as NTFS you need to be logged into an account with administrator privileges.\n\nWithout administrator privileges, you can format the volume as FAT.</string> <string lang="en" key="AES_HELP">FIPS-approved cipher (Rijndael, published in 1998) that may be used by U.S. government departments and agencies to protect classified information up to the Top Secret level. 256-bit key, 128-bit block, 14 rounds (AES-256). Mode of operation is XTS.</string> <string lang="en" key="ALREADY_MOUNTED">Volume is already mounted.</string> - <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nTrueCrypt installation may be corrupted.</string> + <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nRealCrypt installation may be corrupted.</string> <string lang="en" key="ERR_NOT_ENOUGH_RANDOM_DATA">CAUTION: There is not enough data in the Random Number Generator pool to provide the requested amount of random data.\n\nYou should not proceed any further. Please select 'Report a Bug' from the Help menu, and report this error.</string> - <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with TrueCrypt. Therefore, please do NOT report this as a bug/problem in TrueCrypt and please do NOT ask for help with this in the TrueCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> + <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with RealCrypt. Therefore, please do NOT report this as a bug/problem in RealCrypt and please do NOT ask for help with this in the RealCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> <string lang="en" key="DEVICE_NOT_READY_ERROR">If you are accessing a drive for removable media, please make sure that a medium is inserted in the drive. The drive/medium may also be damaged (there may be a physical defect on it) or a cable may be damaged/disconnected.</string> <string lang="en" key="WHOLE_DRIVE_ENCRYPTION_PREVENTED_BY_DRIVERS">Your system appears to be using custom chipset drivers containing a bug that prevents encryption of the whole system drive.\n\nPlease try updating or uninstalling any custom (non-Microsoft) chipset drivers before proceeding. If it does not help, try encrypting the system partition only.</string> <string lang="en" key="BAD_DRIVE_LETTER">Invalid drive letter.</string> @@ -377,13 +377,13 @@ <string lang="en" key="CAPSLOCK_ON">Warning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="VOLUME_TYPE_TITLE">Volume Type</string> <string lang="en" key="HIDDEN_VOLUME_TYPE_HELP">It may happen that you are forced by somebody to reveal the password to an encrypted volume. There are many situations where you cannot refuse to reveal the password (for example, due to extortion). Using a so-called hidden volume allows you to solve such situations without revealing the password to your volume.</string> - <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal TrueCrypt volume.</string> + <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal RealCrypt volume.</string> <string lang="en" key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</string> <string lang="en" key="CIPHER_HIDVOL_HOST_TITLE">Outer Volume Encryption Options</string> <string lang="en" key="CIPHER_HIDVOL_TITLE">Hidden Volume Encryption Options</string> <string lang="en" key="CIPHER_TITLE">Encryption Options</string> <string lang="en" key="CLEAN_WINMRU_FAILED">WARNING: Failed to clear the path of the last selected volume/keyfile (remembered by file selector)!</string> - <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. TrueCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in TrueCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> + <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. RealCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in RealCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> <string lang="en" key="CREATE_FAILED">Failed to create volume %hs</string> <string lang="en" key="DEVICE_FREE_BYTES">Size of %hs is %.2f bytes</string> <string lang="en" key="DEVICE_FREE_KB">Size of %hs is %.2f KB</string> @@ -393,20 +393,20 @@ <string lang="en" key="DEVICE_FREE_PB">Size of %hs is %.2f PB</string> <string lang="en" key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</string> <string lang="en" key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</string> - <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in TrueCrypt may be wrong now. Therefore, exit the TrueCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf TrueCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> + <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in RealCrypt may be wrong now. Therefore, exit the RealCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf RealCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> <string lang="en" key="INPLACE_ENC_CANT_LOCK_OR_DISMOUNT_FILESYS">Error: The filesystem could not be locked and/or dismounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</string> <string lang="en" key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable TrueCrypt to format it safely.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable TrueCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable RealCrypt to format it safely.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable RealCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> <string lang="en" key="WHOLE_NONSYS_DEVICE_ENC_CONFIRM">Warning: If you encrypt the entire device (as opposed to encrypting only a partition on it), operating systems will consider the device as new, empty, and unformatted (as it will contain no partition table) and may spontaneously initialize the device (or ask you if you want to do so), which may damage the volume. Furthermore, it will not be possible to consistently mount the volume as favorite (e.g. when the drive number changes) or to assign a favorite-volume label to it.\n\nTo avoid that you may want to consider creating a partition on the device and encrypting the partition instead.\n\nAre you sure want to encrypt the entire device?</string> - <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main TrueCrypt window (alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main TrueCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the TrueCrypt FAQ, and assign it to another partition/device).</string> + <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main RealCrypt window (alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main RealCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the RealCrypt FAQ, and assign it to another partition/device).</string> <string lang="en" key="OS_NOT_SUPPORTED_FOR_NONSYS_INPLACE_ENC">In-place encryption of non-system volumes is not supported on the version of the operating system you are currently using (it is supported only on Windows Vista and later versions of Windows).\n\nThe reason is that this version of Windows does not support shrinking of a filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> <string lang="en" key="ONLY_NTFS_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nNote: The reason is that Windows does not support shrinking of other types of filesystems (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> - <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted TrueCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. TrueCrypt cannot encrypt it in place.</string> - <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a TrueCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted TrueCrypt volume (that has been created and mounted in step 1). That way, you will create a TrueCrypt-encrypted backup of the data.\n\n3) Create a TrueCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the TrueCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup TrueCrypt volume (created and mounted in step 1) to the mounted TrueCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> - <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted TrueCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> + <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted RealCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. RealCrypt cannot encrypt it in place.</string> + <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a RealCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted RealCrypt volume (that has been created and mounted in step 1). That way, you will create a RealCrypt-encrypted backup of the data.\n\n3) Create a RealCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the RealCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup RealCrypt volume (created and mounted in step 1) to the mounted RealCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> + <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted RealCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> <string lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="DISK_FREE_BYTES">Free space on drive %hs is %.2f bytes.</string> @@ -416,47 +416,47 @@ <string lang="en" key="DISK_FREE_TB">Free space on drive %hs is %.2f TB</string> <string lang="en" key="DISK_FREE_PB">Free space on drive %hs is %.2f PB</string> <string lang="en" key="DRIVELETTERS">Could not get available drive letters.</string> - <string lang="en" key="DRIVER_NOT_FOUND">Error: TrueCrypt driver not found.\n\nPlease copy the files 'truecrypt.sys' and 'truecrypt-x64.sys' to the directory where the main TrueCrypt application (TrueCrypt.exe) is located.</string> - <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the TrueCrypt driver is currently running.\n\nIf you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already installed, you must uninstall it first (or upgrade it using the TrueCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > TrueCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > TrueCrypt > Remove.\n\nSimilarly, if you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> + <string lang="en" key="DRIVER_NOT_FOUND">Error: RealCrypt driver not found.\n\nPlease copy the files 'realcrypt.sys' and 'realcrypt-x64.sys' to the directory where the main RealCrypt application (RealCrypt.exe) is located.</string> + <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the RealCrypt driver is currently running.\n\nIf you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already installed, you must uninstall it first (or upgrade it using the RealCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > RealCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > RealCrypt > Remove.\n\nSimilarly, if you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> <string lang="en" key="ERR_CIPHER_INIT_FAILURE">Error: Cipher initialization failure.</string> <string lang="en" key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</string> - <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and TrueCrypt must be terminated. If this is caused by a bug in TrueCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- TrueCrypt component name\n- Checksum of TrueCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- TrueCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> - <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nNote that this error has not been caused by TrueCrypt (so the TrueCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> - <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> - <string lang="en" key="EXCEPTION_REPORT_TITLE">TrueCrypt Critical Error</string> - <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">TrueCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want TrueCrypt to check whether a bug in TrueCrypt could have caused the system crash?</string> - <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want TrueCrypt to continue detecting system crashes?</string> - <string lang="en" key="NO_MINIDUMP_FOUND">TrueCrypt found no system crash minidump file.</string> + <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and RealCrypt must be terminated. If this is caused by a bug in RealCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- RealCrypt component name\n- Checksum of RealCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- RealCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> + <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nNote that this error has not been caused by RealCrypt (so the RealCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> + <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> + <string lang="en" key="EXCEPTION_REPORT_TITLE">RealCrypt Critical Error</string> + <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">RealCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want RealCrypt to check whether a bug in RealCrypt could have caused the system crash?</string> + <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want RealCrypt to continue detecting system crashes?</string> + <string lang="en" key="NO_MINIDUMP_FOUND">RealCrypt found no system crash minidump file.</string> <string lang="en" key="ASK_DELETE_KERNEL_CRASH_DUMP">Do you want to delete the Windows crash dump file to free up disk space?</string> - <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, TrueCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the truecrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> - <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, TrueCrypt will analyze the system crash. This may take up to several minutes.</string> + <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, RealCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the realcrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> + <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, RealCrypt will analyze the system crash. This may take up to several minutes.</string> <string lang="en" key="DEBUGGER_NOT_FOUND">Please make sure the environment variable 'PATH' includes the path to 'kd.exe' (Kernel Debugger).</string> - <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that TrueCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> + <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that RealCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> <string lang="en" key="SYSTEM_CRASH_UPDATE_DRIVER">Results of the analysis indicate that updating the following driver might solve this issue: </string> - <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in TrueCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> + <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in RealCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> <string lang="en" key="ASK_SEND_ERROR_REPORT">Do you want to send us the above error report?</string> <string lang="en" key="ENCRYPT">&Encrypt</string> <string lang="en" key="DECRYPT">&Decrypt</string> <string lang="en" key="PERMANENTLY_DECRYPT">&Permanently Decrypt</string> <string lang="en" key="EXIT">Exit</string> <string lang="en" key="EXT_PARTITION">Please create a logical drive for this extended partition, and then try again.</string> - <string lang="en" key="FILE_HELP">A TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, TrueCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created TrueCrypt container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container that you are about to create now.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, TrueCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container you are about to create now.</string> - <string lang="en" key="DEVICE_HELP">Encrypted device-hosted TrueCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> - <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted TrueCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> + <string lang="en" key="FILE_HELP">A RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, RealCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created RealCrypt container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container that you are about to create now.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, RealCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container you are about to create now.</string> + <string lang="en" key="DEVICE_HELP">Encrypted device-hosted RealCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> + <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted RealCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> <string lang="en" key="DEVICE_HELP_HIDDEN_HOST_VOL">\nSelect the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nOuter volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Outer volumes can also be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the TrueCrypt volume within which you wish to create a hidden volume.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the RealCrypt volume within which you wish to create a hidden volume.</string> <string lang="en" key="FILE_IN_USE">WARNING: The host file/device is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device (for example, antivirus or backup applications) should be closed before mounting the volume.\n\nContinue mounting?</string> <string lang="en" key="FILE_IN_USE_FAILED">Error: Cannot mount volume. The host file/device is already in use. Attempt to mount without exclusive access failed as well.</string> <string lang="en" key="FILE_OPEN_FAILED">The file could not be opened.</string> <string lang="en" key="FILE_TITLE">Volume Location</string> <string lang="en" key="FILESYS_PAGE_TITLE">Large Files</string> - <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this TrueCrypt volume?</string> - <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, TrueCrypt will choose a suitable default file system for the TrueCrypt volume (you will be able to select a file system in the next step).</string> + <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this RealCrypt volume?</string> + <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, RealCrypt will choose a suitable default file system for the RealCrypt volume (you will be able to select a file system in the next step).</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_TITLE">Volume Creation Mode</string> - <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted TrueCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> + <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted RealCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_INPLACE_HELP">The entire selected partition and all data stored on it will be encrypted in place. If the partition is empty, you should choose the other option (the volume will be created much faster).</string> <string lang="en" key="NOTE_BEGINNING">Note: </string> <string lang="en" key="RESUME">&Resume</string> @@ -471,52 +471,52 @@ <string lang="en" key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</string> <string lang="en" key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</string> <string lang="en" key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system TrueCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> + <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system RealCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> <string lang="en" key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</string> - <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe TrueCrypt volume has been created and is ready for use. If you wish to create another TrueCrypt volume, click Next. Otherwise, click Exit.</string> - <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden TrueCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> + <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe RealCrypt volume has been created and is ready for use. If you wish to create another RealCryptRealCrypt volume, click Next. Otherwise, click Exit.</string> + <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden RealCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_TITLE">Volume Fully Encrypted</string> - <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED TRUECRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN TRUECRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main TrueCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted TrueCrypt volume now) and is ready for use.</string> - <string lang="en" key="FORMAT_FINISHED_INFO">The TrueCrypt volume has been successfully created.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED REALCRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN REALCRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main RealCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted RealCrypt volume now) and is ready for use.</string> + <string lang="en" key="FORMAT_FINISHED_INFO">The RealCrypt volume has been successfully created.</string> <string lang="en" key="FORMAT_FINISHED_TITLE">Volume Created</string> <string lang="en" key="FORMAT_HELP">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Format to create the volume.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_HELP">Click Format to create the outer volume. For more information, please refer to the documentation.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_TITLE">Outer Volume Format</string> <string lang="en" key="FORMAT_HIDVOL_TITLE">Hidden Volume Format</string> <string lang="en" key="FORMAT_TITLE">Volume Format</string> - <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the TrueCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal TrueCrypt volume and then a hidden TrueCrypt volume within it. Inexperienced users should always select this option.</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing TrueCrypt volume. It will be assumed that you have already created a TrueCrypt volume that is suitable to host the hidden volume.</string> + <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the RealCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal RealCrypt volume and then a hidden RealCrypt volume within it. Inexperienced users should always select this option.</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing RealCrypt volume. It will be assumed that you have already created a RealCrypt volume that is suitable to host the hidden volume.</string> <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_TITLE">Volume Creation Mode</string> <string lang="en" key="HIDVOL_FORMAT_FINISHED_TITLE">Hidden Volume Created</string> - <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden TrueCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE TRUECRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> + <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden RealCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE REALCRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> <string lang="en" key="FIRST_HIDDEN_OS_BOOT_INFO">You have started the hidden operating system. As you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system. However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the original system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that will be used for the decoy operating system).\n\n\nPlease click Next to continue.</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP">Outer volume has been successfully created and mounted as drive %hc:. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, cluster bitmap of the outer volume will be scanned to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. Cluster bitmap scanning ensures that no data on the outer volume are overwritten by the hidden volume.</string> <string lang="en" key="HIDVOL_HOST_FILLING_TITLE">Outer Volume Contents</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nIn the next steps, you will set the options for the outer volume (within which the hidden volume will be created later on). </string> - <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer TrueCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> + <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer RealCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_TITLE">Outer Volume</string> <string lang="en" key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system.\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</string> - <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).</string> + <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).</string> <string lang="en" key="HIDVOL_PRE_CIPHER_HELP">\n\nThe volume cluster bitmap has been scanned and the maximum possible size of the hidden volume has been determined. In the next steps you will set the options, the size, and the password for the hidden volume.</string> <string lang="en" key="HIDVOL_PRE_CIPHER_TITLE">Hidden Volume</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! TrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time TrueCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new TrueCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! RealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time RealCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new RealCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> <string lang="en" key="CANNOT_SATISFY_OVER_4G_FILE_SIZE_REQ">You have indicated intent to store files larger than 4 GB on the volume. This requires the volume to be formatted as NTFS, which, however, will not be possible.</string> - <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden TrueCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by TrueCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> - <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal TrueCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the TrueCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden TrueCrypt volumes are mounted as read-only (no data can be written to such filesystems or TrueCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden TrueCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden TrueCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. TrueCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> - <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal TrueCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a TrueCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> + <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden RealCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by RealCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> + <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal RealCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the RealCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden RealCrypt volumes are mounted as read-only (no data can be written to such filesystems or RealCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden RealCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden RealCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. RealCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> + <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal RealCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a RealCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> <string lang="en" key="CONFIRM_RESTART">Your computer must be restarted.\n\nDo you want to restart it now?</string> <string lang="en" key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">An error occurred when obtaining the system encryption status.</string> <string lang="en" key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</string> <string lang="en" key="INIT_RAND">Failed to initialize the random number generator!</string> <string lang="en" key="INIT_REGISTER">Unable to initialize the application. Failed to register the Dialog class.</string> <string lang="en" key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</string> - <string lang="en" key="INTRO_TITLE">TrueCrypt Volume Creation Wizard</string> + <string lang="en" key="INTRO_TITLE">RealCrypt Volume Creation Wizard</string> <string lang="en" key="MAX_HIDVOL_SIZE_BYTES">Maximum possible hidden volume size for this volume is %.2f bytes.</string> <string lang="en" key="MAX_HIDVOL_SIZE_KB">Maximum possible hidden volume size for this volume is %.2f KB.</string> <string lang="en" key="MAX_HIDVOL_SIZE_MB">Maximum possible hidden volume size for this volume is %.2f MB.</string> @@ -524,13 +524,13 @@ <string lang="en" key="MOUNTED_NOPWCHANGE">Volume password/keyfiles cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNTED_NO_PKCS5_PRF_CHANGE">The header key derivation algorithm cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNT_BUTTON">&Mount</string> - <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of TrueCrypt is required to mount this volume.</string> - <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'TrueCrypt Format.exe' is in the folder from which 'TrueCrypt.exe' was launched. If it is not, please reinstall TrueCrypt, or locate 'TrueCrypt Format.exe' on your disk and run it.</string> + <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of RealCrypt is required to mount this volume.</string> + <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'RealCrypt Format.exe' is in the folder from which 'RealCrypt.exe' was launched. If it is not, please reinstall RealCrypt, or locate 'RealCrypt Format.exe' on your disk and run it.</string> <string lang="en" key="NEXT">&Next ></string> <string lang="en" key="FINALIZE">&Finish</string> <string lang="en" key="INSTALL">&Install</string> <string lang="en" key="EXTRACT">E&xtract</string> - <string lang="en" key="NODRIVER">Unable to connect to the TrueCrypt device driver. TrueCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> + <string lang="en" key="NODRIVER">Unable to connect to the RealCrypt device driver. RealCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> <string lang="en" key="NOFONT">Error occurred when loading/preparing fonts.</string> <string lang="en" key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</string> <string lang="en" key="DRIVE_LETTER_UNAVAILABLE">Drive letter not available.</string> @@ -543,37 +543,37 @@ <string lang="en" key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</string> <string lang="en" key="OPENFILES_DRIVER">The driver is unable to dismount the volume. Some files located on the volume are probably still open.</string> <string lang="en" key="OPENFILES_LOCK">Unable to lock the volume. There are still open files on the volume. Therefore, it cannot be dismounted.</string> - <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">TrueCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> - <string lang="en" key="OPEN_VOL_TITLE">Select a TrueCrypt Volume</string> + <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">RealCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> + <string lang="en" key="OPEN_VOL_TITLE">Select a RealCrypt Volume</string> <string lang="en" key="OPEN_TITLE">Specify Path and File Name</string> <string lang="en" key="SELECT_PKCS11_MODULE">Select PKCS #11 Library</string> <string lang="en" key="OUTOFMEMORY">Out of Memory</string> - <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a TrueCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a TrueCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a TrueCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the TrueCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> - <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: TRUECRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new TrueCrypt container?</string> + <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a RealCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a RealCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a RealCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the RealCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> + <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: REALCRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new RealCrypt container?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE">CAUTION: ALL FILES CURRENTLY STORED ON THE SELECTED %s '%hs'%s WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%hs'%s?</string> - <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%hs'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</string> - <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a TrueCrypt volume within it</string> + <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a RealCrypt volume within it</string> <string lang="en" key="PASSWORD">Password</string> <string lang="en" key="IDD_PCDM_CHANGE_PKCS5_PRF">Set Header Key Derivation Algorithm</string> <string lang="en" key="IDD_PCDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume</string> <string lang="en" key="IDD_PCDM_REMOVE_ALL_KEYFILES_FROM_VOL">Remove All Keyfiles from Volume</string> - <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the TrueCrypt User Guide.</string> - <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your TrueCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the TrueCrypt Rescue Disk and entering the old password). You should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your TrueCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a TrueCrypt keyfile. Note that TrueCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> + <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the RealCrypt User Guide.</string> + <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your RealCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the RealCrypt Rescue Disk and entering the old password). You should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your RealCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a RealCrypt keyfile. Note that RealCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> <string lang="en" key="KEYFILE_CHANGED">Keyfile(s) successfully added/removed.</string> <string lang="en" key="KEYFILE_EXPORTED">Keyfile exported.</string> <string lang="en" key="PKCS5_PRF_CHANGED">Header key derivation algorithm successfully set.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, TrueCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the TrueCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, RealCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the RealCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</string> <string lang="en" key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of more than 20 characters (the longer, the better). The maximum possible length is 64 characters.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HELP">Please choose a password for the hidden volume. </string> <string lang="en" key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </string> <string lang="en" key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password that you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</string> - <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, TrueCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> + <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, RealCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HOST_HELP">\nPlease choose a password for the outer volume. This will be the password that you will be able to reveal to an adversary if you are asked or forced to do so.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume.\n\nNote: The maximum possible password length is 64 characters.</string> <string lang="en" key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</string> <string lang="en" key="PASSWORD_HIDVOL_HOST_TITLE">Outer Volume Password</string> @@ -581,16 +581,16 @@ <string lang="en" key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</string> <string lang="en" key="PASSWORD_LENGTH_WARNING">WARNING: Short passwords are easy to crack using brute force techniques!\n\nWe recommend choosing a password consisting of more than 20 characters. Are you sure you want to use a short password?</string> <string lang="en" key="PASSWORD_TITLE">Volume Password</string> - <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no TrueCrypt volume found.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no TrueCrypt volume found.</string> + <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no RealCrypt volume found.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no RealCrypt volume found.</string> <string lang="en" key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nWarning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</string> <string lang="en" key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</string> - <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">TrueCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> + <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">RealCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> <string lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</string> <string lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</string> <string lang="en" key="PREV">< &Back</string> @@ -619,9 +619,9 @@ <string lang="en" key="TEST_PLAINTEXT_SIZE">The test plaintext you have supplied is too long or short.</string> <string lang="en" key="TWO_LAYER_CASCADE_HELP">Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key) and then with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> <string lang="en" key="THREE_LAYER_CASCADE_HELP">Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key), then with %hs (%d-bit key), and finally with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> - <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in TrueCrypt (it is a limitation of Windows).</string> - <string lang="en" key="TRAVELER_DISK_CREATED">TrueCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run TrueCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that TrueCrypt was run on a Windows system even if it is run in portable mode.</string> - <string lang="en" key="TC_TRAVELER_DISK">TrueCrypt Traveler Disk</string> + <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in RealCrypt (it is a limitation of Windows).</string> + <string lang="en" key="TRAVELER_DISK_CREATED">RealCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run RealCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that RealCrypt was run on a Windows system even if it is run in portable mode.</string> + <string lang="en" key="TC_TRAVELER_DISK">RealCrypt Traveler Disk</string> <string lang="en" key="TWOFISH_HELP">Designed by Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Twofish was one of the AES finalists.</string> <string lang="en" key="MORE_INFO_ABOUT">More information on %hs</string> <string lang="en" key="UNKNOWN">Unknown</string> @@ -637,10 +637,10 @@ <string lang="en" key="VOL_SIZE_WRONG">Error: Incorrect volume size.</string> <string lang="en" key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Format?</string> <string lang="en" key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, sparse-file-hosted volumes cannot provide plausible deniability (host a hidden volume). Also note that if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</string> - <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by TrueCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in TrueCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> + <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by RealCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in RealCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> <string lang="en" key="PASSWORD_CACHE_WIPED_SHORT">Password cache wiped</string> - <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the TrueCrypt driver cache have been wiped.</string> - <string lang="en" key="WRONG_VOL_TYPE">TrueCrypt cannot change the password for a foreign volume.</string> + <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the RealCrypt driver cache have been wiped.</string> + <string lang="en" key="WRONG_VOL_TYPE">RealCrypt cannot change the password for a foreign volume.</string> <string lang="en" key="SELECT_FREE_DRIVE">Please select a free drive letter from the list.</string> <string lang="en" key="SELECT_A_MOUNTED_VOLUME">Please select a mounted volume in the drive letter list.</string> <string lang="en" key="AMBIGUOUS_VOL_SELECTION">Two different mounted volumes are currently selected (one in the drive letter list and the other in the input field below the list).\n\nPlease choose the volume you wanted to select:</string> @@ -648,16 +648,16 @@ <string lang="en" key="ERR_PROCESS_KEYFILE">Error while processing keyfile!</string> <string lang="en" key="ERR_PROCESS_KEYFILE_PATH">Error processing keyfile path!</string> <string lang="en" key="ERR_KEYFILE_PATH_EMPTY">The keyfile path contains no files.\n\nPlease note that folders (and files they contain) found in keyfile search paths are ignored.</string> - <string lang="en" key="UNSUPPORTED_OS">TrueCrypt does not support this operating system.</string> - <string lang="en" key="UNSUPPORTED_BETA_OS">Error: TrueCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> + <string lang="en" key="UNSUPPORTED_OS">RealCrypt does not support this operating system.</string> + <string lang="en" key="UNSUPPORTED_BETA_OS">Error: RealCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> <string lang="en" key="ERR_MEM_ALLOC">Error: Cannot allocate memory.</string> <string lang="en" key="ERR_PERF_COUNTER">Error: Could not retrieve value of performance counter.</string> <string lang="en" key="ERR_VOL_FORMAT_BAD">Error: Bad volume format.</string> <string lang="en" key="ERR_HIDDEN_NOT_NORMAL_VOLUME">Error: You supplied a password for a hidden volume (not for a normal volume).</string> - <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a TrueCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> - <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">TrueCrypt - Legal Notices</string> + <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a RealCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> + <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">RealCrypt - Legal Notices</string> <string lang="en" key="ALL_FILES">All Files</string> - <string lang="en" key="TC_VOLUMES">TrueCrypt Volumes</string> + <string lang="en" key="TC_VOLUMES">RealCrypt Volumes</string> <string lang="en" key="DLL_FILES">Library Modules</string> <string lang="en" key="FORMAT_NTFS_STOP">NTFS formatting cannot continue.</string> <string lang="en" key="CANT_MOUNT_VOLUME">Cannot mount volume.</string> @@ -677,8 +677,8 @@ <string lang="en" key="CLUSTER_TOO_SMALL">The selected cluster size is too small for this volume size. A greater cluster size will be used instead.</string> <string lang="en" key="CANT_GET_VOLSIZE">Error: Cannot get volume size!\n\nMake sure the selected volume is not being used by the system or an application.</string> <string lang="en" key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes must not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume needs to be created within a non-dynamic container.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS">Note: The FAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT).</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS_ASK">Note that the FAT file system is more suitable for outer volumes than the NTFS file system. For example, the maximum possible size of the hidden volume will very likely be significantly greater if the outer volume is formatted as FAT (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume can reside only in the second half of the outer volume).\n\nAre you sure you want to format the outer volume as NTFS?</string> <string lang="en" key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</string> @@ -687,15 +687,15 @@ <string lang="en" key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</string> <string lang="en" key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</string> <string lang="en" key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</string> - <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two TrueCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> + <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two RealCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> <string lang="en" key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</string> <string lang="en" key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</string> - <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this TrueCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> + <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this RealCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> <string lang="en" key="CANT_ACCESS_VOL">Error: Cannot access the volume!\n\nMake sure that the selected volume exists, that it is not mounted or being used by the system or an application, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented TrueCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented TrueCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented RealCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented RealCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="CANT_DISMOUNT_OUTER_VOL">Error: Cannot dismount the outer volume!\n\nVolume cannot be dismounted if it contains files or folders being used by a program or the system.\n\nPlease close any program that might be using files or directories on the volume and click Retry.</string> <string lang="en" key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</string> <string lang="en" key="CANT_ACCESS_OUTER_VOL">Error: Cannot access the outer volume! Volume creation cannot continue.</string> @@ -745,22 +745,22 @@ <string lang="en" key="VOLUME_HEADER_DAYS"> (%I64d days ago)</string> <string lang="en" key="VOLUME_FORMAT_VERSION">Volume Format Version</string> <string lang="en" key="BACKUP_HEADER">Embedded Backup Header</string> - <string lang="en" key="TC_BOOT_LOADER_VERSION">TrueCrypt Boot Loader Version</string> + <string lang="en" key="TC_BOOT_LOADER_VERSION">RealCrypt Boot Loader Version</string> <string lang="en" key="FIRST_AVAILABLE">First available</string> <string lang="en" key="REMOVABLE_DISK">Removable Disk</string> <string lang="en" key="HARDDISK">Harddisk</string> <string lang="en" key="UNCHANGED">Unchanged</string> <string lang="en" key="SETUP_MODE_TITLE">Wizard Mode</string> <string lang="en" key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</string> - <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install TrueCrypt on this system.</string> + <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install RealCrypt on this system.</string> <string lang="en" key="SETUP_MODE_HELP_UPGRADE">Note: You can upgrade without decrypting even if the system partition/drive is encrypted or you use a hidden operating system.</string> - <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run TrueCrypt in so-called portable mode. TrueCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'TrueCrypt.exe' (then TrueCrypt will run in portable mode).</string> + <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run RealCrypt in so-called portable mode. RealCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'RealCrypt.exe' (then RealCrypt will run in portable mode).</string> <string lang="en" key="SETUP_OPTIONS_TITLE">Setup Options</string> <string lang="en" key="SETUP_OPTIONS_INFO">Here you can set various options to control the installation process.</string> <string lang="en" key="SETUP_PROGRESS_TITLE">Installing</string> - <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while TrueCrypt is being installed.</string> - <string lang="en" key="SETUP_FINISHED_TITLE_DON">TrueCrypt has been successfully installed</string> - <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">TrueCrypt has been successfully upgraded</string> + <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while RealCrypt is being installed.</string> + <string lang="en" key="SETUP_FINISHED_TITLE_DON">RealCrypt has been successfully installed</string> + <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">RealCrypt has been successfully upgraded</string> <string lang="en" key="SETUP_FINISHED_INFO_DON">Please consider making a donation. You can click Finish anytime to close the installer.</string> <string lang="en" key="EXTRACTION_OPTIONS_TITLE">Extraction Options</string> <string lang="en" key="EXTRACTION_OPTIONS_INFO">Here you can set various options to control the extraction process.</string> @@ -768,30 +768,30 @@ <string lang="en" key="EXTRACTION_FINISHED_TITLE_DON">Files successfully extracted</string> <string lang="en" key="EXTRACTION_FINISHED_INFO">All files have been successfully extracted to the destination location.</string> <string lang="en" key="AUTO_FOLDER_CREATION">If the specified folder does not exist, it will be automatically created.</string> - <string lang="en" key="SETUP_UPGRADE_DESTINATION">The TrueCrypt program files will be upgraded in the location where TrueCrypt is installed. If you need to select a different location, please uninstall TrueCrypt first.</string> - <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of TrueCrypt?</string> - <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used TrueCrypt before, we recommend that you read the chapter Beginner's Tutorial in the TrueCrypt User Guide. Do you want to view the tutorial?</string> + <string lang="en" key="SETUP_UPGRADE_DESTINATION">The RealCrypt program files will be upgraded in the location where RealCrypt is installed. If you need to select a different location, please uninstall RealCrypt first.</string> + <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of RealCrypt?</string> + <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used RealCrypt before, we recommend that you read the chapter Beginner's Tutorial in the RealCrypt User Guide. Do you want to view the tutorial?</string> <string lang="en" key="SELECT_AN_ACTION">Please select an action to perform from the following:</string> <string lang="en" key="REPAIR_REINSTALL">Repair/Reinstall</string> <string lang="en" key="UPGRADE">Upgrade</string> <string lang="en" key="UNINSTALL">Uninstall</string> - <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall TrueCrypt, you must have administrator privileges. Do you want to continue?</string> - <string lang="en" key="TC_INSTALLER_IS_RUNNING">TrueCrypt Installer is currently running on this system and performing or preparing installation or update of TrueCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall RealCrypt, you must have administrator privileges. Do you want to continue?</string> + <string lang="en" key="TC_INSTALLER_IS_RUNNING">RealCrypt Installer is currently running on this system and performing or preparing installation or update of RealCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="INSTALL_FAILED">Installation failed.</string> <string lang="en" key="UNINSTALL_FAILED">Uninstallation failed.</string> - <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official TrueCrypt website at www.truecrypt.org).</string> + <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official RealCrypt website at www.realcrypt.org).</string> <string lang="en" key="CANNOT_WRITE_FILE_X">Cannot write file %hs</string> <string lang="en" key="EXTRACTING_VERB">Extracting</string> <string lang="en" key="CANNOT_READ_FROM_PACKAGE">Cannot read data from the package.</string> <string lang="en" key="CANT_VERIFY_PACKAGE_INTEGRITY">Cannot verify the integrity of this distribution package.</string> <string lang="en" key="EXTRACTION_FAILED">Extraction failed.</string> <string lang="en" key="ROLLBACK">The installation has been rolled back.</string> - <string lang="en" key="INSTALL_OK">TrueCrypt has been successfully installed.</string> - <string lang="en" key="SETUP_UPDATE_OK">TrueCrypt has been successfully updated.</string> - <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">TrueCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> - <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade TrueCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'TrueCrypt installation'. If System Restore is not available, you should try installing the original or the new version of TrueCrypt again before you shut down or restart the system.</string> - <string lang="en" key="UNINSTALL_OK">TrueCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the TrueCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the TrueCrypt installer or created by TrueCrypt.</string> - <string lang="en" key="REMOVING_REG">Removing TrueCrypt registry entries</string> + <string lang="en" key="INSTALL_OK">RealCrypt has been successfully installed.</string> + <string lang="en" key="SETUP_UPDATE_OK">RealCrypt has been successfully updated.</string> + <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">RealCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> + <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade RealCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'RealCrypt installation'. If System Restore is not available, you should try installing the original or the new version of RealCrypt again before you shut down or restart the system.</string> + <string lang="en" key="UNINSTALL_OK">RealCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the RealCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the RealCrypt installer or created by RealCrypt.</string> + <string lang="en" key="REMOVING_REG">Removing RealCrypt registry entries</string> <string lang="en" key="ADDING_REG">Adding registry entry</string> <string lang="en" key="REMOVING_APPDATA">Removing application-specific data</string> <string lang="en" key="INSTALLING">Installing</string> @@ -805,20 +805,20 @@ <string lang="en" key="UNINSTALL_OF_FAILED">Failed to uninstall '%hs'. %hs\nDo you want to continue uninstalling?</string> <string lang="en" key="INSTALL_COMPLETED">Installation completed.</string> <string lang="en" key="CANT_CREATE_FOLDER">The folder '%hs' could not be created</string> - <string lang="en" key="CLOSE_TC_FIRST">The TrueCrypt device driver cannot be unloaded.\n\nPlease close all open TrueCrypt windows first. If it does not help, please restart Windows and then try again.</string> - <string lang="en" key="DISMOUNT_ALL_FIRST">All TrueCrypt volumes must be dismounted before installing or uninstalling TrueCrypt.</string> - <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of TrueCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of TrueCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall TrueCrypt. After you uninstall the old version of TrueCrypt, run the installer of the new version of TrueCrypt again.</string> + <string lang="en" key="CLOSE_TC_FIRST">The RealCrypt device driver cannot be unloaded.\n\nPlease close all open RealCrypt windows first. If it does not help, please restart Windows and then try again.</string> + <string lang="en" key="DISMOUNT_ALL_FIRST">All RealCrypt volumes must be dismounted before installing or uninstalling RealCrypt.</string> + <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of RealCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of RealCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall RealCrypt. After you uninstall the old version of RealCrypt, run the installer of the new version of RealCrypt again.</string> <string lang="en" key="REG_INSTALL_FAILED">The installation of the registry entries has failed</string> - <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing TrueCrypt again.</string> - <string lang="en" key="STARTING_DRIVER">Starting TrueCrypt device driver</string> + <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing RealCrypt again.</string> + <string lang="en" key="STARTING_DRIVER">Starting RealCrypt device driver</string> <string lang="en" key="DRIVER_UINSTALL_FAILED">Uninstallation of the device driver has failed. Please note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be uninstalled (or reinstalled).</string> - <string lang="en" key="INSTALLING_DRIVER">Installing TrueCrypt device driver</string> - <string lang="en" key="STOPPING_DRIVER">Stopping TrueCrypt device driver</string> - <string lang="en" key="REMOVING_DRIVER">Uninstalling TrueCrypt device driver</string> + <string lang="en" key="INSTALLING_DRIVER">Installing RealCrypt device driver</string> + <string lang="en" key="STOPPING_DRIVER">Stopping RealCrypt device driver</string> + <string lang="en" key="REMOVING_DRIVER">Uninstalling RealCrypt device driver</string> <string lang="en" key="COM_REG_FAILED">Registration of the User Account Control support library failed.</string> <string lang="en" key="COM_DEREG_FAILED">Unregistration of the User Account Control support library failed.</string> - <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the TrueCrypt driver is not (and cannot be) fully portable (whereas the TrueCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that TrueCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> - <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run TrueCrypt in portable mode (as opposed to running an installed copy of TrueCrypt), the system will ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run TrueCrypt in portable mode, TrueCrypt needs to load and start the TrueCrypt device driver. TrueCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run TrueCrypt with administrator privileges (UAC prompt).\n\nNote that if you install TrueCrypt on the system (as opposed to running TrueCrypt in portable mode), the system will NOT ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> + <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the RealCrypt driver is not (and cannot be) fully portable (whereas the RealCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that RealCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> + <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run RealCrypt in portable mode (as opposed to running an installed copy of RealCrypt), the system will ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run RealCrypt in portable mode, RealCrypt needs to load and start the RealCrypt device driver. RealCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run RealCrypt with administrator privileges (UAC prompt).\n\nNote that if you install RealCrypt on the system (as opposed to running RealCrypt in portable mode), the system will NOT ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> <string lang="en" key="CONTAINER_ADMIN_WARNING">Warning: This instance of the Volume Creation Wizard has administrator privileges.\n\nYour new volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of the Volume Creation Wizard and launch a new one without administrator privileges.\n\nDo you want to close this instance of the Volume Creation Wizard?</string> <string lang="en" key="CANNOT_DISPLAY_LICENSE">Error: Cannot display license.</string> <string lang="en" key="OUTER_VOL_WRITE_PREVENTED">Outer(!)</string> @@ -828,8 +828,8 @@ <string lang="en" key="SECONDS">s</string> <string lang="en" key="OPEN">Open</string> <string lang="en" key="DISMOUNT">Dismount</string> - <string lang="en" key="SHOW_TC">Show TrueCrypt</string> - <string lang="en" key="HIDE_TC">Hide TrueCrypt</string> + <string lang="en" key="SHOW_TC">Show RealCrypt</string> + <string lang="en" key="HIDE_TC">Hide RealCrypt</string> <string lang="en" key="TOTAL_DATA_READ">Data Read since Mount</string> <string lang="en" key="TOTAL_DATA_WRITTEN">Data Written since Mount</string> <string lang="en" key="ENCRYPTED_PORTION">Encrypted Portion</string> @@ -848,14 +848,14 @@ <string lang="en" key="PROGRESS_STATUS_ERROR">Error</string> <string lang="en" key="FAVORITE_DISCONNECTED_DEV">Device disconnected</string> <string lang="en" key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</string> - <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, TrueCrypt will be unable to mount this favorite volume if the device number changes.</string> - <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nTrueCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> - <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">TrueCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or TrueCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the TrueCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'TrueCrypt Background Task'.</string> + <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, RealCrypt will be unable to mount this favorite volume if the device number changes.</string> + <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nRealCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> + <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">RealCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or RealCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the RealCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'RealCrypt Background Task'.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</string> - <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable TrueCrypt to assign a label to the partition.</string> + <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable RealCrypt to assign a label to the partition.</string> <string lang="en" key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</string> <string lang="en" key="ENTER_PASSWORD_FOR">Enter password for %hs</string> <string lang="en" key="ENTER_PASSWORD_FOR_LABEL">Enter password for '%s'</string> @@ -863,11 +863,11 @@ <string lang="en" key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</string> <string lang="en" key="ENTER_HEADER_BACKUP_PASSWORD">Enter password for the header stored in backup file</string> <string lang="en" key="KEYFILE_CREATED">Keyfile has been successfully created.</string> - <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! TrueCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> + <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! RealCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> <string lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</string> <string lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</string> <string lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</string> - <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that TrueCrypt determines the type through the process of trial and error).</string> + <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that RealCrypt determines the type through the process of trial and error).</string> <string lang="en" key="CONFIRM_VOL_HEADER_RESTORE">Are you sure you want to restore volume header of %hs?\n\nWARNING: Restoring a volume header also restores the volume password that was valid when the backup was created. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) will be necessary to mount the volume again after the volume header is restored.\n\nAfter you click Yes, you will select the header backup file.</string> <string lang="en" key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</string> <string lang="en" key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</string> @@ -876,20 +876,20 @@ <string lang="en" key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</string> <string lang="en" key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</string> <string lang="en" key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</string> - <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</string> - <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual TrueCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new TrueCrypt Rescue Disk ISO image and the location where you wish to place it.</string> + <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by RealCrypt 6.0 or later contain embedded backup headers).</string> + <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual RealCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new RealCrypt Rescue Disk ISO image and the location where you wish to place it.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your TrueCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The TrueCrypt Rescue Disk has been successfully verified.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating TrueCrypt Rescue Disk.</string> - <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">TrueCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a TrueCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your RealCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The RealCrypt Rescue Disk has been successfully verified.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a RealCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating RealCrypt Rescue Disk.</string> + <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">RealCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a RealCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a RealCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> <string lang="en" key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</string> - <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">TrueCrypt - System Favorite Volumes</string> + <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">RealCrypt - System Favorite Volumes</string> <string lang="en" key="SYS_FAVORITES_HELP_LINK">What are system favorite volumes?</string> <string lang="en" key="SYS_FAVORITES_REQUIRE_PBA">The system partition/drive does not appear to be encrypted.\n\nSystem favorite volumes can be mounted using only a pre-boot authentication password. Therefore, to enable use of system favorite volumes, you need to encrypt the system partition/drive first.</string> <string lang="en" key="DISMOUNT_FIRST">Please dismount the volume before proceeding.</string> @@ -916,14 +916,14 @@ <string lang="en" key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (e.g., to '.tc').\n\nAre you sure you want to use the problematic file extension?</string> <string lang="en" key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or some other file extension that is similarly problematic. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (e.g., to '.tc') after you dismount the volume.</string> <string lang="en" key="HOMEPAGE">Homepage</string> - <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.</string> - <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> - <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of TrueCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted TrueCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted TrueCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted TrueCrypt volume larger than 2048 GB under Windows XP.</string> + <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.</string> + <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> + <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of RealCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted RealCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted RealCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted RealCrypt volume larger than 2048 GB under Windows XP.</string> <string lang="en" key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">WARNING: If you want to be able to add more data/files to the outer volume in future, you should consider choosing a smaller size for the hidden volume.\n\nAre you sure you want to continue with the size you specified?</string> - <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a TrueCrypt volume.</string> - <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular TrueCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> + <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a RealCrypt volume.</string> + <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular RealCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> <string lang="en" key="CONFIRM_SAVE_DEFAULT_KEYFILES">WARNING: If default keyfiles are set and enabled, volumes that are not using these keyfiles will be impossible to mount. Therefore, after you enable default keyfiles, keep in mind to uncheck the 'Use keyfiles' checkbox (below a password input field) whenever mounting such volumes.\n\nAre you sure you want to save the selected keyfiles/paths as default?</string> <string lang="en" key="HK_AUTOMOUNT_DEVICES">Auto-Mount Devices</string> <string lang="en" key="HK_DISMOUNT_ALL">Dismount All</string> @@ -932,38 +932,38 @@ <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE">Force Dismount All & Wipe Cache</string> <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE_AND_EXIT">Force Dismount All, Wipe Cache & Exit</string> <string lang="en" key="HK_MOUNT_FAVORITE_VOLUMES">Mount Favorite Volumes</string> - <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main TrueCrypt Window</string> + <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main RealCrypt Window</string> <string lang="en" key="PRESS_A_KEY_TO_ASSIGN">(Click here and press a key)</string> <string lang="en" key="ACTION">Action</string> <string lang="en" key="SHORTCUT">Shortcut</string> <string lang="en" key="CANNOT_USE_RESERVED_KEY">Error: This shortcut is reserved. Please choose a different shortcut.</string> <string lang="en" key="SHORTCUT_ALREADY_IN_USE">Error: Shortcut already in use.</string> - <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more TrueCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as TrueCrypt.</string> - <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system TrueCrypt volumes (including system favorite volumes). TrueCrypt supports creation of paging files only on an encrypted system partition/drive.</string> - <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents TrueCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. TrueCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> - <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nTrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> - <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">TrueCrypt volume mounted as %c: has been dismounted.</string> - <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">TrueCrypt volumes have been dismounted.</string> - <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">TrueCrypt volumes have been dismounted and password cache has been wiped.</string> + <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more RealCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as RealCrypt.</string> + <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system RealCrypt volumes (including system favorite volumes). RealCrypt supports creation of paging files only on an encrypted system partition/drive.</string> + <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents RealCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. RealCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> + <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nRealCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> + <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">RealCrypt volume mounted as %c: has been dismounted.</string> + <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">RealCrypt volumes have been dismounted.</string> + <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">RealCrypt volumes have been dismounted and password cache has been wiped.</string> <string lang="en" key="SUCCESSFULLY_DISMOUNTED">Successfully dismounted</string> - <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the TrueCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the TrueCrypt Background Task?</string> + <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the RealCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the RealCrypt Background Task?</string> <string lang="en" key="CONFIRM_NO_FORCED_AUTODISMOUNT">WARNING: If this option is disabled, volumes containing open files/directories will not be possible to auto-dismount.\n\nAre you sure you want to disable this option?</string> <string lang="en" key="WARN_PREF_AUTO_DISMOUNT">WARNING: Volumes containing open files/directories will NOT be auto-dismounted.\n\nTo prevent this, enable the following option in this dialog window: 'Force auto-dismount even if volume contains open files or directories'</string> - <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, TrueCrypt may fail to auto-dismount volumes in such cases.</string> + <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, RealCrypt may fail to auto-dismount volumes in such cases.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PROMPT">You have scheduled the process of encryption of a partition/volume. The process has not been completed yet.\n\nDo you want to resume the process now?</string> <string lang="en" key="SYSTEM_ENCRYPTION_RESUME_PROMPT">You have scheduled the process of encryption or decryption of the system partition/drive. The process has not been completed yet.\n\nDo you want to start (resume) the process now?</string> <string lang="en" key="ASK_NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL">Do you want to be prompted about whether you want to resume the currently scheduled processes of encryption of non-system partitions/volumes?</string> <string lang="en" key="KEEP_PROMPTING_ME">Yes, keep prompting me</string> <string lang="en" key="DO_NOT_PROMPT_ME">No, do not prompt me</string> - <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="CONFIRM_EXIT">WARNING: If TrueCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish TrueCrypt to run in the background, disable the TrueCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of TrueCrypt in the Preferences).\n\nAre you sure you want TrueCrypt to exit?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="CONFIRM_EXIT">WARNING: If RealCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish RealCrypt to run in the background, disable the RealCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of RealCrypt in the Preferences).\n\nAre you sure you want RealCrypt to exit?</string> <string lang="en" key="CONFIRM_EXIT_UNIVERSAL">Exit?</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> - <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> + <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> <string lang="en" key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">Error: Failed to interrupt the process of encryption/decryption of the system partition/drive.</string> <string lang="en" key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</string> <string lang="en" key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</string> @@ -971,71 +971,71 @@ <string lang="en" key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="NOTHING_TO_RESUME">There is no process/task to resume.</string> - <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: TrueCrypt Background Task is disabled. After you exit TrueCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nEnable TrueCrypt Background Task?</string> + <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: RealCrypt Background Task is disabled. After you exit RealCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nEnable RealCrypt Background Task?</string> <string lang="en" key="LANG_PACK_VERSION">Language pack version: %s</string> - <string lang="en" key="CHECKING_FS">Checking the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since TrueCrypt 4.1.\n\nWe strongly recommend that you move data from this TrueCrypt volume to a new volume created by this version of TrueCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with TrueCrypt 4.1 or later.</string> - <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of TrueCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new TrueCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> - <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted TrueCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> + <string lang="en" key="CHECKING_FS">Checking the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since RealCrypt 4.1.\n\nWe strongly recommend that you move data from this RealCrypt volume to a new volume created by this version of RealCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with RealCrypt 4.1 or later.</string> + <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of RealCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new RealCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> + <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted RealCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> <string lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</string> - <string lang="en" key="MOUNT_TC_VOLUME">Mount TrueCrypt volume</string> - <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all TrueCrypt volumes</string> - <string lang="en" key="UAC_INIT_ERROR">TrueCrypt failed to obtain Administrator privileges.</string> + <string lang="en" key="MOUNT_TC_VOLUME">Mount RealCrypt volume</string> + <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all RealCrypt volumes</string> + <string lang="en" key="UAC_INIT_ERROR">RealCrypt failed to obtain Administrator privileges.</string> <string lang="en" key="ERR_ACCESS_DENIED">Access was denied by the operating system.\n\nPossible cause: The operating system requires that you have read/write permission (or administrator privileges) for certain folders, files, and devices, in order for you to be allowed to read and write data to/from them. Normally, a user without administrator privileges is allowed to create, read and modify files in his or her Documents folder.</string> <string lang="en" key="SECTOR_SIZE_UNSUPPORTED">Error: The drive uses an unsupported sector size.\n\nIt is currently not possible to create partition/device-hosted volumes on drives that use sectors larger than 4096 bytes. However, note that you can create file-hosted volumes (containers) on such drives.</string> <string lang="en" key="SYSENC_UNSUPPORTED_SECTOR_SIZE_BIOS">It is currently not possible to encrypt a system installed on a disk that uses a sector size other than 512 bytes.</string> - <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The TrueCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the TrueCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in TrueCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> + <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The RealCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the RealCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in RealCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> <string lang="en" key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">The feature is not supported on the version of the operating system you are currently using.</string> - <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">TrueCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> + <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">RealCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_VISTA_SP0">Before you can encrypt the system partition/drive on Windows Vista, you need to install Service Pack 1 or higher for Windows Vista (no such Service Pack has been installed on this system yet).\n\nNote: Service Pack 1 for Windows Vista resolved an issue causing a shortage of free base memory during system boot.</string> - <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">TrueCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading TrueCrypt, please install Service Pack 1 or higher for Windows Vista.</string> - <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires TrueCrypt to be installed on the system (you are running TrueCrypt in portable mode).\n\nPlease install TrueCrypt and then try again.</string> + <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">RealCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading RealCrypt, please install Service Pack 1 or higher for Windows Vista.</string> + <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires RealCrypt to be installed on the system (you are running RealCrypt in portable mode).\n\nPlease install RealCrypt and then try again.</string> <string lang="en" key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</string> <string lang="en" key="GPT_BOOT_DRIVE_UNSUPPORTED">Your system drive has a GUID partition table (GPT). Currently, only drives with a MBR partition table are supported.</string> - <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The TrueCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> - <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your TrueCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the TrueCrypt Boot Loader with the Windows system loader.</string> + <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The RealCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> + <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your RealCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the RealCrypt Boot Loader with the Windows system loader.</string> <string lang="en" key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</string> <string lang="en" key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</string> - <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the TrueCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use TrueCrypt. The above options allow you to do that by customizing the TrueCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the TrueCrypt boot loader.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the TrueCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> + <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the RealCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use RealCrypt. The above options allow you to do that by customizing the RealCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the RealCrypt boot loader.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the RealCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> <string lang="en" key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">Your system partition/drive appears to be fully encrypted.</string> - <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">TrueCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).</string> - <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> + <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">RealCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).</string> + <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> <string lang="en" key="SYSDRIVE_NON_STANDARD_PARTITIONS">Your system drive contains a non-standard partition.\n\nIf you are using a notebook, your system drive probably contains a special recovery partition. After the whole system drive is encrypted (including any recovery partition), your system might become unbootable if your computer is using an inappropriately designed BIOS. It would also be impossible to use any recovery partition until the system drive is decrypted. Therefore, we recommend that you encrypt only the system partition.</string> - <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> + <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> <string lang="en" key="WHOLE_SYC_DEVICE_RECOM">As your system drive contains only a single partition that occupies the whole drive, it is preferable (more secure) to encrypt the entire drive including the free "slack" space that typically surrounds such a partition.\n\nDo you want to encrypt the entire system drive?</string> <string lang="en" key="TEMP_NOT_ON_SYS_PARTITION">Your system is configured to store temporary files on a non-system partition.\n\nTemporary files may be stored only on the system partition.</string> <string lang="en" key="USER_PROFILE_NOT_ON_SYS_PARTITION">Your user profile files are not stored on the system partition.\n\nUser profile files may be stored only on the system partition.</string> <string lang="en" key="PAGING_FILE_NOT_ON_SYS_PARTITION">There is/are paging file(s) on non-system partitions.\n\nPaging files may be located only on the system partition.</string> - <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start TrueCrypt and try creating the hidden OS again.</string> - <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by TrueCrypt during the process of creation of the hidden operating system.</string> + <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start RealCrypt and try creating the hidden OS again.</string> + <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by RealCrypt during the process of creation of the hidden operating system.</string> <string lang="en" key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</string> - <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> - <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. TrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> + <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> + <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. RealCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> <string lang="en" key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents i t prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</string> <string lang="en" key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</string> <string lang="en" key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</string> <string lang="en" key="KEYFILES_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">Keyfiles are currently not supported for system encryption.</string> - <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: TrueCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> - <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for TrueCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> - <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As TrueCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> - <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">TrueCrypt prevented change of keyboard layout.</string> - <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. TrueCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> - <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a TrueCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the TrueCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe TrueCrypt Rescue Disk ISO image will be created in the location specified below.</string> - <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the TrueCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the TrueCrypt Volume Creation Wizard and follow its instructions.</string> + <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: RealCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> + <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for RealCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> + <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As RealCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> + <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">RealCrypt prevented change of keyboard layout.</string> + <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. RealCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> + <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a RealCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the RealCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe RealCrypt Rescue Disk ISO image will be created in the location specified below.</string> + <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the RealCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the RealCrypt Volume Creation Wizard and follow its instructions.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn it to a CD or DVD.\n\n%lsAfter you burn the Rescue Disk, click Next to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you should either burn the image to a CD/DVD or move it to a safe location for later use.\n\n%lsClick Next to continue.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</string> <string lang="en" key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</string> - <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a TrueCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new TrueCrypt Rescue Disk for it even if you use the same password.</string> + <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a RealCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new RealCrypt Rescue Disk for it even if you use the same password.</string> <string lang="en" key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">Error: Cannot save system encryption settings.</string> <string lang="en" key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">Cannot initiate the system encryption pretest.</string> <string lang="en" key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</string> <string lang="en" key="WIPE_MODE_TITLE">Wipe Mode</string> - <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when TrueCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> + <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when RealCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> <string lang="en" key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</string> <string lang="en" key="DEVICE_WIPE_PAGE_TITLE">Wiping</string> <string lang="en" key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</string> @@ -1051,131 +1051,131 @@ <string lang="en" key="WIPE_MODE_35_GUTMANN">35-pass ("Gutmann")</string> <string lang="en" key="SYS_MULTI_BOOT_MODE_TITLE">Number of Operating Systems</string> <string lang="en" key="MULTI_BOOT_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to encrypt Windows in multi-boot configurations.\n\nContinue?</string> - <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, TrueCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> - <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">TrueCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> + <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, RealCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> + <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">RealCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_TITLE">Boot Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">Is the currently running operating system installed on the boot drive?\n\nNote: Sometimes, Windows is not installed on the same drive as the Windows boot loader (boot partition). If that is the case, select 'No'.</string> - <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">TrueCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> + <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">RealCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_TITLE">Number of System Drives</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">How many drives contain an operating system?\n\nNote: For example, if you have any operating system (e.g. Windows, Mac OS X, Linux, etc.) installed on your primary drive and any additional operating system installed on your secondary drive, select '2 or more'.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">TrueCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">RealCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">Multiple Systems on Single Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">Are there any other operating systems installed on the drive on which the currently running operating system is installed?\n\nNote: For example, if the currently running operating system is installed on the drive #0, which contains several partitions, and if one of the partitions contains Windows and another partition contains any additional operating system (e.g. Windows, Mac OS X, Linux, etc.), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_TITLE">Non-Windows Boot Loader</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_OUTCOME_TITLE">Multi-Boot</string> - <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">TrueCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the TrueCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the TrueCrypt Boot Loader screen) and thus you will be able boot Linux.</string> - <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the TrueCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> + <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">RealCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the RealCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the RealCrypt Boot Loader screen) and thus you will be able boot Linux.</string> + <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the RealCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</string> - <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want TrueCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> + <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want RealCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> <string lang="en" key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</string> <string lang="en" key="SYSENC_NORMAL_TYPE_HELP">Select this option if you merely want to encrypt the system partition or the entire system drive.</string> <string lang="en" key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password to the hidden operating system. For a detailed explanation, please click the link below.</string> <string lang="en" key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</string> <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_TITLE">Hidden Operating System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two TrueCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). TrueCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two RealCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). RealCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> <string lang="en" key="SYSENC_DRIVE_ANALYSIS_TITLE">Detecting Hidden Sectors</string> - <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while TrueCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start TrueCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while RealCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start RealCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SYS_ENCRYPTION_SPAN_TITLE">Area to Encrypt</string> - <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the TrueCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> + <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the RealCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> <string lang="en" key="COLLECTING_RANDOM_DATA_TITLE">Collecting Random Data</string> <string lang="en" key="KEYS_GEN_TITLE">Keys Generated</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT">TrueCrypt has found no CD/DVD burner connected to your computer. TrueCrypt needs a CD/DVD burner to burn a bootable TrueCrypt Rescue Disk containing a backup of the encryption keys, TrueCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the TrueCrypt Rescue Disk.</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT">RealCrypt has found no CD/DVD burner connected to your computer. RealCrypt needs a CD/DVD burner to burn a bootable RealCrypt Rescue Disk containing a backup of the encryption keys, RealCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the RealCrypt Rescue Disk.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO">I have no CD/DVD burner but I will store the Rescue Disk ISO image on a removable drive (e.g. USB flash drive).</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_CONNECT_LATER">I will connect a CD/DVD burner to my computer later. Terminate the process now.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_CONNECTED_NOW">A CD/DVD burner is connected to my computer now. Continue and write the Rescue Disk.</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the TrueCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the TrueCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the TrueCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable TrueCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the TrueCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the RealCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the RealCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the RealCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable RealCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the RealCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> <string lang="en" key="RESCUE_DISK_RECORDING_TITLE">Rescue Disk Recording</string> <string lang="en" key="RESCUE_DISK_CREATED_TITLE">Rescue Disk Created</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_TITLE">System Encryption Pretest</string> <string lang="en" key="RESCUE_DISK_DISK_VERIFIED_TITLE">Rescue Disk Verified</string> - <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe TrueCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> - <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the TrueCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> - <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by TrueCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The TrueCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, TrueCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the TrueCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the TrueCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> + <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe RealCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> + <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the RealCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> + <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by RealCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The RealCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, RealCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the RealCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the RealCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_1">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if Windows cannot start after you restart the computer.\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but TrueCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the TrueCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and TrueCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the TrueCrypt Boot Loader screen does not appear (before Windows starts), insert the TrueCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the TrueCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. In the TrueCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but RealCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the RealCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and RealCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the RealCrypt Boot Loader screen does not appear (before Windows starts), insert the RealCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the RealCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. In the RealCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_TITLE">Pretest Completed</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run TrueCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> - <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, TrueCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run RealCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> + <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, RealCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> <string lang="en" key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</string> <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO_TITLE">Original System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the TrueCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, TrueCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> - <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using TrueCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the TrueCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the TrueCrypt Boot Loader will be removed).</string> - <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the RealCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, RealCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> + <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using RealCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the RealCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the RealCrypt Boot Loader will be removed).</string> + <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use TrueCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot TrueCrypt Rescue Disk\n\nTo boot a TrueCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. Note: In the TrueCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use TrueCrypt Rescue Disk (After Encrypting)\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the TrueCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the TrueCrypt Boot Loader may be damaged. The TrueCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore TrueCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but TrueCrypt says that the password is incorrect, the master key or other critical data may be damaged. The TrueCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the TrueCrypt Boot Loader is damaged, you can avoid running it by booting directly from the TrueCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run TrueCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use RealCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot RealCrypt Rescue Disk\n\nTo boot a RealCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. Note: In the RealCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use RealCrypt Rescue Disk (After Encrypting)\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the RealCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the RealCrypt Boot Loader may be damaged. The RealCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore RealCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but RealCrypt says that the password is incorrect, the master key or other critical data may be damaged. The RealCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the RealCrypt Boot Loader is damaged, you can avoid running it by booting directly from the RealCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the RealCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run RealCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular RealCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_3">1) For security reasons, shut down your computer and leave it powered off for at least several minutes (the longer, the better). This is required to clear the memory, which contains sensitive data. Then turn on the computer but do not boot the hidden system.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the TrueCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because TrueCrypt will then automatically install the TrueCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install TrueCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run TrueCrypt and select 'System' > 'Encrypt System Partition/Drive'. The TrueCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the TrueCrypt Volume Creation Wizard.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the TrueCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the RealCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because RealCrypt will then automatically install the RealCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install RealCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run RealCrypt and select 'System' > 'Encrypt System Partition/Drive'. The RealCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the RealCrypt Volume Creation Wizard.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the RealCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_8">6) Select the option 'Encrypt the Windows system partition' and then click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_9">7) If there are only the hidden system and the decoy system installed on the computer, select the option 'Single-boot' (if there are more than these two systems installed on the computer, select 'Multi-boot'). Then click 'Next'.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_11">9) In this step, choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. of the pre-boot authentication password for the hidden operating system) will remain secret.\n\nImportant: The password you choose for the decoy system must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_12">10) Follow the remaining instructions in the wizard so as to encrypt the decoy operating system.\n\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_13">After Decoy System Is Created\n------------------------------------------------\n\nAfter you encrypt the decoy system, the whole process of creation of the hidden operating system will be completed and you will be able to use these three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the TrueCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the TrueCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the RealCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the RealCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_15">The third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by TrueCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the TrueCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by RealCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the RealCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_TITLE">Operating System Cloning</string> - <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, TrueCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> + <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, RealCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> <string lang="en" key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</string> <string lang="en" key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</string> - <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The TrueCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the TrueCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.truecrypt.org/docs/?s=troubleshooting</string> + <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The RealCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the RealCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.realcrypt.org/docs/?s=troubleshooting</string> <string lang="en" key="SYS_DRIVE_NOT_ENCRYPTED">The system partition/drive does not appear to be encrypted (neither partially nor fully).</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade TrueCrypt (but you can upgrade it or reinstall the same version).</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade RealCrypt (but you can upgrade it or reinstall the same version).</string> <string lang="en" key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">Your system partition/drive is currently being encrypted, decrypted, or otherwise modified. Please interrupt the encryption/decryption/modification process (or wait until it is complete) before proceeding.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the TrueCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the RealCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="SYSTEM_ENCRYPTION_NOT_COMPLETED">The process of encryption or decryption of the system partition/drive has not been completed. Please wait until it is complete before proceeding.</string> <string lang="en" key="ERR_ENCRYPTION_NOT_COMPLETED">Error: The process of encryption of the partition/drive has not been completed. It must be completed first.</string> - <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, TrueCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main TrueCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> - <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">TrueCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> + <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, RealCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main RealCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> + <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">RealCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> <string lang="en" key="ERR_PARAMETER_INCORRECT">Error: Incorrect/invalid parameter.</string> <string lang="en" key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">You have selected a partition or a device but the wizard mode you selected is suitable only for file containers.\n\nDo you want to change the wizard mode?</string> - <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a TrueCrypt file container instead?</string> + <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a RealCrypt file container instead?</string> <string lang="en" key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</string> - <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The TrueCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the TrueCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the TrueCrypt Rescue Disk to boot or to repair the TrueCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> + <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The RealCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the RealCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the RealCrypt Rescue Disk to boot or to repair the RealCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> <string lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</string> - <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update TrueCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the TrueCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded TrueCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a TrueCrypt driver and TrueCrypt applications whose version numbers are different from the version number of the TrueCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> - <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system.\n\nYou should run the TrueCrypt installer (whose version number is the same as the one of the TrueCrypt Boot Loader) to update TrueCrypt on this operating system.</string> - <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the TrueCrypt Rescue Disk, you should reinstall TrueCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the TrueCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the TrueCrypt Boot Loader.</string> - <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">TrueCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in TrueCrypt.</string> - <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that TrueCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, TrueCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update RealCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the RealCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded RealCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a RealCrypt driver and RealCrypt applications whose version numbers are different from the version number of the RealCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> + <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system.\n\nYou should run the RealCrypt installer (whose version number is the same as the one of the RealCrypt Boot Loader) to update RealCrypt on this operating system.</string> + <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the RealCrypt Rescue Disk, you should reinstall RealCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the RealCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the RealCrypt Boot Loader.</string> + <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">RealCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in RealCrypt.</string> + <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that RealCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, RealCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SKIP_HIDDEN_SECTOR_DETECTION">Skip detection of hidden sectors (use the size reported by the operating system)</string> <string lang="en" key="RETRY_HIDDEN_SECTOR_DETECTION">Try to detect hidden sectors again</string> - <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. TrueCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want TrueCrypt to write zeroes to unreadable sectors?</string> - <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, TrueCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want TrueCrypt to discard data in the unreadable sectors now?</string> - <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: TrueCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> + <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. RealCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want RealCrypt to write zeroes to unreadable sectors?</string> + <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, RealCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want RealCrypt to discard data in the unreadable sectors now?</string> + <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: RealCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> <string lang="en" key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</string> - <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow TrueCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let TrueCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> + <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow RealCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let RealCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> <string lang="en" key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</string> - <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow TrueCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> + <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow RealCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</string> <string lang="en" key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</string> @@ -1185,37 +1185,37 @@ <string lang="en" key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</string> <string lang="en" key="SECURITY_TOKEN_ERROR">Security token error</string> <string lang="en" key="CKR_PIN_INCORRECT">Password for security token is incorrect.</string> - <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by TrueCrypt (select 'Tools' > 'Keyfile Generator').</string> + <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by RealCrypt (select 'Tools' > 'Keyfile Generator').</string> <string lang="en" key="ALL_TOKEN_SESSIONS_CLOSED">All open security token sessions have been closed.</string> <string lang="en" key="SELECT_TOKEN_KEYFILES">Select Security Token Keyfiles</string> <string lang="en" key="TOKEN_SLOT_ID">Slot</string> <string lang="en" key="TOKEN_NAME">Token name</string> <string lang="en" key="TOKEN_DATA_OBJECT_LABEL">File name</string> - <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in TrueCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In TrueCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> + <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in RealCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In RealCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> <string lang="en" key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal TrueCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in TrueCrypt'. In addition, when TrueCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main TrueCrypt application window.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and TrueCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the TrueCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the TrueCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal RealCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in RealCrypt'. In addition, when RealCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main RealCrypt application window.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and RealCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the RealCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the RealCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> <string lang="en" key="SETTING_REQUIRES_REBOOT">Note that this setting takes effect only after the operating system is restarted.</string> <string lang="en" key="COMMAND_LINE_ERROR">Error while parsing command line.</string> <string lang="en" key="RESCUE_DISK">Rescue Disk</string> <string lang="en" key="SELECT_FILE_AND_MOUNT">Select &File and Mount...</string> <string lang="en" key="SELECT_DEVICE_AND_MOUNT">Select &Device and Mount...</string> - <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in TrueCrypt</string> + <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in RealCrypt</string> <string lang="en" key="MOUNT_SYSTEM_FAVORITES_ON_BOOT">Mount system favorite volumes when Windows starts (in the initial phase of the startup procedure)</string> - <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted TrueCrypt volume resides, you should always dismount the TrueCrypt volume in TrueCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> - <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in TrueCrypt and select 'Repair Filesystem').</string> - <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the TrueCrypt volume to another, healthy, TrueCrypt volume.\n\nDo you want to repair the filesystem now?</string> - <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in TrueCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> + <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted RealCrypt volume resides, you should always dismount the RealCrypt volume in RealCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> + <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in RealCrypt and select 'Repair Filesystem').</string> + <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the RealCrypt volume to another, healthy, RealCrypt volume.\n\nDo you want to repair the filesystem now?</string> + <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in RealCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</string> - <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by TrueCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> + <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by RealCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> <string lang="en" key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</string> <string lang="en" key="NUMBER_OF_THREADS">%d threads</string> <string lang="en" key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</string> <string lang="en" key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</string> - <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want TrueCrypt to attempt to disable write protection of the partition/drive?</string> + <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want RealCrypt to attempt to disable write protection of the partition/drive?</string> <string lang="en" key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: TrueCrypt volume auto-dismounted</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in TrueCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: RealCrypt volume auto-dismounted</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in RealCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> <string lang="en" key="TEST">Test</string> <string lang="en" key="KEYFILE">Keyfile</string> <string lang="en" key="VKEY_08">Backspace</string> @@ -1287,7 +1287,7 @@ </localization>  <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> - <xs:element name="TrueCrypt"> + <xs:element name="RealCrypt"> <xs:complexType> <xs:sequence> <xs:element name="localization"> @@ -1338,4 +1338,4 @@ </xs:complexType> </xs:element> </xs:schema> -</TrueCrypt> +</RealCrypt> diff -Naur truecrypt-7.0a-source.orig//Common/Tcdefs.h truecrypt-7.0a-source/Common/Tcdefs.h --- truecrypt-7.0a-source.orig//Common/Tcdefs.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Common/Tcdefs.h 2010-11-23 16:19:04.000000000 +0100 @@ -12,7 +12,7 @@ #ifndef TCDEFS_H #define TCDEFS_H -#define TC_APP_NAME "TrueCrypt" +#define TC_APP_NAME "RealCrypt" // Version displayed to user #define VERSION_STRING "7.1a" @@ -247,13 +247,13 @@ #define TC_MAX_PATH 260 /* Includes the null terminator */ #endif -#define TC_STR_RELEASED_BY "Released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE +#define TC_STR_RELEASED_BY "Originally released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE #define MAX_URL_LENGTH 2084 /* Internet Explorer limit. Includes the terminating null character. */ -#define TC_HOMEPAGE "http://www.truecrypt.org/" -#define TC_APPLINK "http://www.truecrypt.org/applink?version=" VERSION_STRING -#define TC_APPLINK_SECURE "https://www.truecrypt.org/applink?version=" VERSION_STRING +#define TC_HOMEPAGE "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK_SECURE "http://rpmfusion.org/Package/realcrypt/" enum { diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp truecrypt-7.0a-source/Core/Unix/CoreService.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreService.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -357,7 +357,7 @@ string appPath = request.ApplicationExecutablePath; if (appPath.empty()) - appPath = "truecrypt"; + appPath = "realcrypt"; const char *args[] = { "sudo", "-S", "-p", "", appPath.c_str(), TC_CORE_SERVICE_CMDLINE_OPTION, nullptr }; execvp (args[0], ((char* const*) args)); diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -205,17 +205,17 @@ string CoreUnix::GetDefaultMountPointPrefix () const { - const char *envPrefix = getenv ("TRUECRYPT_MOUNT_PREFIX"); + const char *envPrefix = getenv ("REALCRYPT_MOUNT_PREFIX"); if (envPrefix && !string (envPrefix).empty()) return envPrefix; if (FilesystemPath ("/media").IsDirectory()) - return "/media/truecrypt"; + return "/media/realcrypt"; if (FilesystemPath ("/mnt").IsDirectory()) - return "/mnt/truecrypt"; + return "/mnt/realcrypt"; - return GetTempDirectory() + "/truecrypt_mnt"; + return GetTempDirectory() + "/realcrypt_mnt"; } uint32 CoreUnix::GetDeviceSectorSize (const DevicePath &devicePath) const diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h truecrypt-7.0a-source/Core/Unix/CoreUnix.h --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.h 2010-11-23 16:19:04.000000000 +0100 @@ -51,7 +51,7 @@ virtual void DismountNativeVolume (shared_ptr <VolumeInfo> mountedVolume) const { throw NotApplicable (SRC_POS); } virtual bool FilesystemSupportsUnixPermissions (const DevicePath &devicePath) const; virtual string GetDefaultMountPointPrefix () const; - virtual string GetFuseMountDirPrefix () const { return ".truecrypt_aux_mnt"; } + virtual string GetFuseMountDirPrefix () const { return ".realcrypt_aux_mnt"; } virtual MountedFilesystemList GetMountedFilesystems (const DevicePath &devicePath = DevicePath(), const DirectoryPath &mountPoint = DirectoryPath()) const = 0; virtual uid_t GetRealUserId () const; virtual gid_t GetRealGroupId () const; diff -Naur truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp --- truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -113,7 +113,7 @@ { string devPath = mountedVolume->VirtualDevice; - if (devPath.find ("/dev/mapper/truecrypt") != 0) + if (devPath.find ("/dev/mapper/realcrypt") != 0) throw NotApplicable (SRC_POS); size_t devCount = 0; @@ -368,7 +368,7 @@ } stringstream nativeDevName; - nativeDevName << "truecrypt" << options.SlotNumber; + nativeDevName << "realcrypt" << options.SlotNumber; if (nativeDevCount != cipherCount - 1) nativeDevName << "_" << cipherCount - nativeDevCount - 2; diff -Naur truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h truecrypt-7.0a-source/Driver/Fuse/FuseService.h --- truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Driver/Fuse/FuseService.h 2010-11-23 16:19:04.000000000 +0100 @@ -43,7 +43,7 @@ static int ExceptionToErrorCode (); static const char *GetControlPath () { return "/control"; } static const char *GetVolumeImagePath (); - static string GetDeviceType () { return "truecrypt"; } + static string GetDeviceType () { return "realcrypt"; } static uid_t GetGroupId () { return GroupId; } static uid_t GetUserId () { return UserId; } static shared_ptr <Buffer> GetVolumeInfo (); diff -Naur truecrypt-7.0a-source.orig//Main/Application.h truecrypt-7.0a-source/Main/Application.h --- truecrypt-7.0a-source.orig//Main/Application.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Application.h 2010-11-23 16:19:04.000000000 +0100 @@ -24,7 +24,7 @@ static DirectoryPath GetExecutableDirectory (); static FilePath GetExecutablePath (); static int GetExitCode () { return ExitCode; } - static wstring GetName () { return L"TrueCrypt"; } + static wstring GetName () { return L"RealCrypt"; } static UserInterface *GetUserInterface () { return mUserInterface; } static UserInterfaceType::Enum GetUserInterfaceType () { return mUserInterfaceType; } static void Initialize (UserInterfaceType::Enum type); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ namespace TrueCrypt VersionStaticText->SetLabel (Application::GetName() + L" " + StringConverter::ToWide (Version::String())); CopyrightStaticText->SetLabel (StringConverter::ToWide (TC_STR_RELEASED_BY)); - WebsiteHyperlink->SetLabel (L"www.truecrypt.org"); + WebsiteHyperlink->SetLabel (L"RealCrypt is a RPM Fusion rebrand of TrueCrypt, freely available at www.truecrypt.org"); CreditsTextCtrl->SetMinSize (wxSize ( Gui->GetCharWidth (CreditsTextCtrl) * 70, @@ -61,6 +61,6 @@ namespace TrueCrypt L"This software uses wxWidgets library, which is copyright \xA9 1998-2011 Julian Smart, Robert Roebling et al.\n\n" - L"A TrueCrypt Foundation Release"); + L"A RPMfusion Release"); } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -152,7 +152,7 @@ else if (SelectedVolumeType == VolumeType::Hidden) { pageTitle = LangString["SIZE_HIDVOL_TITLE"]; - pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in TrueCrypt but a limitation of the operating system."); + pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in RealCrypt but a limitation of the operating system."); freeSpaceText = StringFormatter (_("Maximum possible hidden volume size for this volume is {0}."), Gui->SizeToString (MaxHiddenVolumeSize)); } else diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -69,7 +69,7 @@ AppendToList ("BACKUP_HEADER", LangString[volumeInfo.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"]); #ifdef TC_LINUX - if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif AppendToList ("TOTAL_DATA_READ", Gui->SizeToString (volumeInfo.TotalDataRead)); diff -Naur truecrypt-7.0a-source.orig//Main/GraphicUserInterface.cpp truecrypt-7.0a-source/Main/GraphicUserInterface.cpp --- truecrypt-7.1a-source.orig//Main/GraphicUserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.1a-source/Main/GraphicUserInterface.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -860,7 +860,7 @@ wxLog::FlushActive(); Application::SetExitCode (1); - Gui->ShowInfo (_("TrueCrypt is already running.")); + Gui->ShowInfo (_("RealCrypt is already running.")); return false; } @@ -983,48 +983,9 @@ wxString GraphicUserInterface::GetHomepageLinkURL (const wxString &linkId, bool secure, const wxString &extraVars) const { - wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)) + L"&dest=" + linkId; + wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)); wxString os, osVersion, architecture; -#ifdef TC_WINDOWS - - os = L"Windows"; - -#elif defined (TC_UNIX) - struct utsname unameData; - if (uname (&unameData) != -1) - { - os = StringConverter::ToWide (unameData.sysname); - osVersion = StringConverter::ToWide (unameData.release); - architecture = StringConverter::ToWide (unameData.machine); - - if (os == L"Darwin") - os = L"MacOSX"; - } - else - os = L"Unknown"; -#else - os = L"Unknown"; -#endif - - os.Replace (L" ", L"-"); - url += L"&os="; - url += os; - - osVersion.Replace (L" ", L"-"); - url += L"&osver="; - url += osVersion; - - architecture.Replace (L" ", L"-"); - url += L"&arch="; - url += architecture; - - if (!extraVars.empty()) - { - url += L"&"; - url += extraVars; - } - return url; } @@ -1050,13 +1011,13 @@ wxString docPath = wstring (Application::GetExecutableDirectory()); #ifdef TC_RESOURCE_DIR - docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/TrueCrypt User Guide.pdf"); + docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/RealCrypt User Guide.pdf"); #elif defined (TC_WINDOWS) - docPath += L"\\TrueCrypt User Guide.pdf"; + docPath += L"\\RealCrypt User Guide.pdf"; #elif defined (TC_MACOSX) - docPath += L"/../Resources/TrueCrypt User Guide.pdf"; + docPath += L"/../Resources/RealCrypt User Guide.pdf"; #elif defined (TC_UNIX) - docPath = L"/usr/share/truecrypt/doc/TrueCrypt User Guide.pdf"; + docPath = L"/usr/share/doc/packages/realcrypt/RealCrypt User Guide.pdf"; #else # error TC_RESOURCE_DIR undefined #endif diff -Naur truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp truecrypt-7.0a-source/Main/LanguageStrings.cpp --- truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/LanguageStrings.cpp 2010-11-23 16:25:14.000000000 +0100 @@ -2,7 +2,7 @@ Copyright (c) 2008-2009 TrueCrypt Developers Association. All rights reserved. Governed by the TrueCrypt License 3.0 the full text of which is contained in - the file License.txt included in TrueCrypt binary and source code distribution + the file License.txt included in RealCrypt binary and source code distribution packages. */ @@ -55,31 +55,31 @@ Map["MOUNT_POINT"] = _("Mount Directory"); Map["NO"] = _("No"); Map["NO_VOLUMES_MOUNTED"] = _("No volumes mounted."); - Map["OPEN_NEW_VOLUME"] = _("Specify a New TrueCrypt Volume"); + Map["OPEN_NEW_VOLUME"] = _("Specify a New RealCrypt Volume"); Map["PARAMETER_INCORRECT"] = _("Parameter incorrrect"); Map["SELECT_KEYFILES"] = _("Select Keyfiles"); - Map["START_TC"] = _("Start TrueCrypt"); + Map["START_TC"] = _("Start RealCrypt"); Map["VOLUME_ALREADY_MOUNTED"] = _("The volume \"{0}\" is already mounted."); Map["UNKNOWN_OPTION"] = _("Unknown option"); Map["VOLUME_LOCATION"] = _("Volume Location"); Map["YES"] = _("Yes"); Map["VOLUME_HOST_IN_USE"] = _("WARNING: The host file/device \"{0}\" is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue mounting?"); Map["VIRTUAL_DEVICE"] = _("Virtual Device"); - Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the TrueCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit TrueCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the TrueCrypt Background Task?"); - Map["CONFIRM_EXIT"] = _("WARNING: If TrueCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish TrueCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want TrueCrypt to exit?"); - Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nTrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); + Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the RealCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit RealCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the RealCrypt Background Task?"); + Map["CONFIRM_EXIT"] = _("WARNING: If RealCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish RealCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want RealCrypt to exit?"); + Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nRealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); Map["ENTER_PASSWORD"] = _("Enter password"); Map["ENTER_PASSWORD_FOR"] = _("Enter password for \"{0}\""); - Map["ENTER_TC_VOL_PASSWORD"] = _("Enter TrueCrypt Volume Password"); + Map["ENTER_TC_VOL_PASSWORD"] = _("Enter RealCrypt Volume Password"); Map["SELECT_KEYFILE_PATH"] = _("Select Keyfile Search Path"); Map["MORE_INFO_ABOUT"] = _("More information on {0}"); Map["TWO_LAYER_CASCADE_HELP"] = _("Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key) and then with {2} ({3}-bit key). Each cipher uses its own key. All keys are mutually independent."); Map["THREE_LAYER_CASCADE_HELP"] = _("Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key), then with {2} ({3}-bit key), and finally with {4} ({5}-bit key). Each cipher uses its own key. All keys are mutually independent."); - Map["CHECKING_FS"] = _("Checking the file system on the TrueCrypt volume mounted as {0}..."); - Map["REPAIRING_FS"] = _("Attempting to repair the file system on the TrueCrypt volume mounted as {0}..."); + Map["CHECKING_FS"] = _("Checking the file system on the RealCrypt volume mounted as {0}..."); + Map["REPAIRING_FS"] = _("Attempting to repair the file system on the RealCrypt volume mounted as {0}..."); Map["UNMOUNT_LOCK_FAILED"] = _("Volume \"{0}\" contains files or folders being used by applications or system.\n\nForce dismount?"); Map["VOLUME_SIZE_HELP"] = _("Please specify the size of the container to create. Note that the minimum possible size of a volume is 292 KB."); - Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by TrueCrypt 5.0 or later."); + Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by RealCrypt 5.0 or later."); } LanguageStrings LangString; diff -Naur truecrypt-7.0a-source.orig//Main/UserInterface.cpp truecrypt-7.0a-source/Main/UserInterface.cpp --- truecrypt-7.0a-source.orig//Main/UserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/UserInterface.cpp 2010-11-23 16:22:58.000000000 +0100 @@ -48,7 +48,7 @@ if (!Preferences.NonInteractive) { if (!SystemInfo::IsVersionAtLeast (2, 6, 24)) - ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a TrueCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); + ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a RealCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); } #endif // TC_LINUX } @@ -280,7 +280,7 @@ prop << LangString["BACKUP_HEADER"] << L": " << LangString[volume.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"] << L'\n'; #ifdef TC_LINUX - if (string (volume.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volume.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif prop << LangString["TOTAL_DATA_READ"] << L": " << SizeToString (volume.TotalDataRead) << L'\n'; @@ -354,10 +354,10 @@ // Unresolved exceptions string typeName (StringConverter::GetTypeName (typeid (ex))); - size_t pos = typeName.find ("TrueCrypt::"); + size_t pos = typeName.find ("RealCrypt::"); if (pos != string::npos) { - return StringConverter::ToWide (typeName.substr (pos + string ("TrueCrypt::").size())) + return StringConverter::ToWide (typeName.substr (pos + string ("RealCrypt::").size())) + L" at " + StringConverter::ToWide (ex.what()); } @@ -466,7 +466,7 @@ EX2MSG (UnsupportedSectorSizeHiddenVolumeProtection, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.")); EX2MSG (UnsupportedSectorSizeNoKernelCrypto, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.")); #else - EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use TrueCrypt on another platform.")); + EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use RealCrypt on another platform.")); #endif EX2MSG (VolumeAlreadyMounted, LangString["VOL_ALREADY_MOUNTED"]); @@ -475,7 +475,7 @@ EX2MSG (VolumeSlotUnavailable, _("Volume slot unavailable.")); #ifdef TC_MACOSX - EX2MSG (HigherFuseVersionRequired, _("TrueCrypt requires MacFUSE 1.3 or later.")); + EX2MSG (HigherFuseVersionRequired, _("RealCrypt requires MacFUSE 1.3 or later.")); #endif #undef EX2MSG @@ -1008,8 +1008,8 @@ wstring helpText = StringConverter::ToWide ( "Synopsis:\n" "\n" - "truecrypt [OPTIONS] COMMAND\n" - "truecrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" + "realcrypt [OPTIONS] COMMAND\n" + "realcrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" "\n" "\n" "Commands:\n" @@ -1093,7 +1093,7 @@ "\n" "MOUNTED_VOLUME:\n" " Specifies a mounted volume. One of the following forms can be used:\n" - " 1) Path to the encrypted TrueCrypt volume.\n" + " 1) Path to the encrypted RealCrypt volume.\n" " 2) Mount directory of the volume's filesystem (if mounted).\n" " 3) Slot number of the mounted volume (requires --slot).\n" "\n" @@ -1119,7 +1119,7 @@ "\n" "--fs-options=OPTIONS\n" " Filesystem mount options. The OPTIONS argument is passed to mount(8)\n" - " command with option -o when a filesystem on a TrueCrypt volume is mounted.\n" + " command with option -o when a filesystem on a RealCrypt volume is mounted.\n" " This option is not available on some platforms.\n" "\n" "--hash=HASH\n" @@ -1141,7 +1141,7 @@ " Load user preferences.\n" "\n" "-m, --mount-options=OPTION1[,OPTION2,OPTION3,...]\n" - " Specifies comma-separated mount options for a TrueCrypt volume:\n" + " Specifies comma-separated mount options for a RealCrypt volume:\n" " headerbak: Use backup headers when mounting a volume.\n" " nokernelcrypto: Do not use kernel cryptographic services.\n" " readonly|ro: Mount volume as read-only.\n" @@ -1217,37 +1217,37 @@ "\n" "IMPORTANT:\n" "\n" - "If you want to use TrueCrypt, you must follow the security requirements and\n" + "If you want to use RealCrypt, you must follow the security requirements and\n" "security precautions listed in chapter 'Security Requirements and Precautions'\n" - "in the TrueCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" + "in the RealCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" "\n" "\nExamples:\n\n" "Create a new volume:\n" - "truecrypt -t -c\n" + "realcrypt -t -c\n" "\n" "Mount a volume:\n" - "truecrypt volume.tc /media/truecrypt1\n" + "realcrypt volume.tc /media/realcrypt1\n" "\n" "Mount a volume as read-only, using keyfiles:\n" - "truecrypt -m ro -k keyfile1,keyfile2 volume.tc\n" + "realcrypt -m ro -k keyfile1,keyfile2 volume.tc\n" "\n" "Mount a volume without mounting its filesystem:\n" - "truecrypt --filesystem=none volume.tc\n" + "realcrypt --filesystem=none volume.tc\n" "\n" "Mount a volume prompting only for its password:\n" - "truecrypt -t -k \"\" --protect-hidden=no volume.tc /media/truecrypt1\n" + "realcrypt -t -k \"\" --protect-hidden=no volume.tc /media/realcrypt1\n" "\n" "Dismount a volume:\n" - "truecrypt -d volume.tc\n" + "realcrypt -d volume.tc\n" "\n" "Dismount all mounted volumes:\n" - "truecrypt -d\n" + "realcrypt -d\n" ); #ifndef TC_NO_GUI if (Application::GetUserInterfaceType() == UserInterfaceType::Graphic) { - wxDialog dialog (nullptr, wxID_ANY, _("TrueCrypt Command Line Help"), wxDefaultPosition); + wxDialog dialog (nullptr, wxID_ANY, _("RealCrypt Command Line Help"), wxDefaultPosition); wxTextCtrl *textCtrl = new wxTextCtrl (&dialog, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE | wxTE_READONLY); textCtrl->SetFont (wxFont (wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, L"Courier")); diff -Naur truecrypt-7.0a-source.orig//Makefile truecrypt-7.0a-source/Makefile --- truecrypt-7.0a-source.orig//Makefile 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Makefile 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ #------ Build configuration ------ -export APPNAME := truecrypt +export APPNAME := realcrypt export BASE_DIR := $(CURDIR) export BUILD_INC := $(BASE_DIR)/Build/Include diff -Naur truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp --- truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -13,14 +13,14 @@ { void SystemLog::WriteDebug (const string &debugMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_DEBUG, "%s", debugMessage.c_str()); closelog(); } void SystemLog::WriteError (const string &errorMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_ERR, "%s", errorMessage.c_str()); closelog(); } --- truecrypt-6.3a-source.orig/Main/CommandLineInterface.cpp 2009-11-22 15:10:00.000000000 +0000 +++ truecrypt-6.3a-source/Main/CommandLineInterface.cpp 2010-02-15 18:55:13.000000000 +0000 @@ -54,7 +54,7 @@ namespace TrueCrypt parser.AddSwitch (L"", L"list-token-keyfiles", _("List security token keyfiles")); parser.AddSwitch (L"", L"load-preferences", _("Load user preferences")); parser.AddSwitch (L"", L"mount", _("Mount volume interactively")); - parser.AddOption (L"m", L"mount-options", _("TrueCrypt volume mount options")); + parser.AddOption (L"m", L"mount-options", _("RealCrypt volume mount options")); parser.AddOption (L"", L"new-keyfiles", _("New keyfiles")); parser.AddOption (L"", L"new-password", _("New password")); parser.AddSwitch (L"", L"non-interactive", _("Do not interact with user")); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.h truecrypt-7.0a-source/Main/Forms/Forms.h --- truecrypt-7.0a-source.orig//Main/Forms/Forms.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.h 2010-11-23 16:19:04.000000000 +0100 @@ -122,7 +122,7 @@ virtual void OnDefaultKeyfilesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnSecurityTokenPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } - virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } +// virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnOnlineHelpMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnBeginnersTutorialMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnFaqMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } @@ -150,7 +150,7 @@ public: - MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); + MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); ~MainFrameBase(); }; @@ -335,7 +335,7 @@ public: - EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~EncryptionTestDialogBase(); }; @@ -446,7 +446,7 @@ wxTextCtrl* LegalNoticesTextCtrl; public: - LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~LegalNoticesDialogBase(); }; @@ -497,7 +497,7 @@ public: - MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter TrueCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); + MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter RealCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); ~MountOptionsDialogBase(); }; @@ -648,7 +648,7 @@ public: - RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~RandomPoolEnrichmentDialogBase(); }; @@ -1023,6 +1023,6 @@ }; -} // namespace TrueCrypt +} // namespace RealCrypt #endif //__Forms__ diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp truecrypt-7.0a-source/Main/Forms/Forms.cpp --- truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -149,9 +149,9 @@ MainMenuBar->Append( SettingsMenu, _("Settin&gs") ); HelpMenu = new wxMenu(); - wxMenuItem* UserGuideMenuItem; +/* wxMenuItem* UserGuideMenuItem; UserGuideMenuItem = new wxMenuItem( HelpMenu, wxID_HELP, wxString( _("User's Guide") ) , wxEmptyString, wxITEM_NORMAL ); - HelpMenu->Append( UserGuideMenuItem ); + HelpMenu->Append( UserGuideMenuItem );*/ wxMenuItem* OnlineHelpMenuItem; OnlineHelpMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("Online Help") ) , wxEmptyString, wxITEM_NORMAL ); @@ -168,7 +168,7 @@ HelpMenu->AppendSeparator(); wxMenuItem* WebsiteMenuItem; - WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("TrueCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); + WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("RealCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); HelpMenu->Append( WebsiteMenuItem ); wxMenuItem* DownloadsMenuItem; @@ -423,7 +423,7 @@ this->Connect( DefaultKeyfilesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Connect( SecurityTokenPreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Connect( PreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Connect( OnlineHelpMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Connect( BeginnersTutorialMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Connect( FaqMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -487,7 +487,7 @@ this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -1683,7 +1683,7 @@ wxStaticBoxSizer* sbSizer14; sbSizer14 = new wxStaticBoxSizer( new wxStaticBox( SecurityPage, wxID_ANY, _("Password Cache") ), wxVERTICAL ); - WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after TrueCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); + WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after RealCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); sbSizer14->Add( WipeCacheOnCloseCheckBox, 0, wxALL, 5 ); @@ -1757,7 +1757,7 @@ bSizer62 = new wxBoxSizer( wxVERTICAL ); wxStaticBoxSizer* sbSizer18; - sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("TrueCrypt Background Task") ), wxVERTICAL ); + sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("RealCrypt Background Task") ), wxVERTICAL ); BackgroundTaskEnabledCheckBox = new wxCheckBox( BackgroundTaskPanel, wxID_ANY, _("Enabled"), wxDefaultPosition, wxDefaultSize, 0 ); @@ -1801,7 +1801,7 @@ LogOnSizer = new wxStaticBoxSizer( new wxStaticBox( SystemIntegrationPage, wxID_ANY, _("Actions to Perform when User Logs On") ), wxVERTICAL ); - StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start TrueCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); + StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start RealCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( StartOnLogonCheckBox, 0, wxALL, 5 ); @@ -1809,7 +1809,7 @@ LogOnSizer->Add( MountFavoritesOnLogonCheckBox, 0, wxALL, 5 ); - MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted TrueCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); + MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted RealCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( MountDevicesOnLogonCheckBox, 0, wxALL, 5 ); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp truecrypt-7.0a-source/Main/Forms/MainFrame.cpp --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -1365,7 +1365,7 @@ else if (show && !mTaskBarIcon->IsIconInstalled()) { #ifndef TC_MACOSX - mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"TrueCrypt"); + mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"RealCrypt"); #endif } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h truecrypt-7.0a-source/Main/Forms/MainFrame.h --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.h 2010-11-23 16:19:04.000000000 +0100 @@ -127,7 +127,7 @@ void OnVolumeButtonClick (wxCommandEvent& event); void OnVolumeDismounted (EventArgs &args) { UpdateVolumeList(); } void OnVolumeMounted (EventArgs &args) { UpdateVolumeList(); } - void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } +// void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } void OnWebsiteMenuItemSelected (wxCommandEvent& event) { Gui->OpenHomepageLink (this, L"website"); } void OnWipeCacheButtonClick (wxCommandEvent& event); void OrganizeFavorites (const FavoriteVolumeList &favorites, size_t newItemCount = 0); Index: realcrypt.spec =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/devel/realcrypt.spec,v retrieving revision 1.19 retrieving revision 1.20 diff -u -r1.19 -r1.20 --- realcrypt.spec 7 Mar 2012 23:16:17 -0000 1.19 +++ realcrypt.spec 13 Apr 2012 15:57:34 -0000 1.20 @@ -1,9 +1,10 @@ #define _default_patch_fuzz 2 +%define _hardened_build 1 Name: realcrypt Summary: Cross platform disk encryption software -Version: 7.1 -Release: 3%{?dist} +Version: 7.1a +Release: 1%{?dist} License: TrueCrypt License Version 3.0 Group: Applications/File URL: http://www.truecrypt.org/ @@ -35,6 +36,7 @@ Source22: Textual_logo_background_real.bmp.lzma Patch1: realcrypt-rpm_opt_flags.patch Patch2: realcrypt-%{version}-rebranding.patch +Patch3: noexecstack.patch Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Requires: fuse, pam, usermode, wxGTK >= 2.8.0 @@ -68,6 +70,7 @@ cp %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE7} . %patch1 -p1 -b .realcrypt-rpm_opt_flags %patch2 -p1 -b .realcrypt-%{version}-rebranding +%patch3 -p1 -b .noexecstack # Replace graphics which include the TrueCrypt logo @@ -143,6 +146,10 @@ %changelog +* Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 +- update to 7.1a +- harden build + * Thu Mar 08 2012 Nicolas Chauvet <kwizart(a)gmail.com> - 7.1-3 - Rebuilt for c++ ABI breakage Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/devel/sources,v retrieving revision 1.8 retrieving revision 1.9 diff -u -r1.8 -r1.9 --- sources 1 Oct 2011 17:41:47 -0000 1.8 +++ sources 13 Apr 2012 15:57:34 -0000 1.9 @@ -1,4 +1,4 @@ -a8268630a870faff07af940f63fb29eb trueCrypt-7.1-source.tar.gz +102d9652681db11c813610882332ae48 trueCrypt-7.1a-source.tar.gz 9bc27b99ba35d06ebce2a509959edc59 Drive_icon_96dpi_real.bmp.lzma 28a8f649fffbad0de024322d92a6d98a Drive_icon_mask_96dpi_real.bmp.lzma 5b44c191a46d727249f28ab77deb2e7c Logo_96dpi_real.bmp.lzma --- realcrypt-7.0a-rebranding.patch DELETED ---

12 years, 7 months

1
0
0 / 0

rpms/VirtualBox-OSE-kmod/F-17 VirtualBox-OSE-kmod.spec,1.63,1.64

by Sérgio M. Basto

Author: sergiomb Update of /cvs/free/rpms/VirtualBox-OSE-kmod/F-17 In directory se02.es.rpmfusion.net:/tmp/cvs-serv14576 Modified Files: VirtualBox-OSE-kmod.spec Log Message: * Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-2.1 - Just build akmods Index: VirtualBox-OSE-kmod.spec =================================================================== RCS file: /cvs/free/rpms/VirtualBox-OSE-kmod/F-17/VirtualBox-OSE-kmod.spec,v retrieving revision 1.63 retrieving revision 1.64 diff -u -r1.63 -r1.64 --- VirtualBox-OSE-kmod.spec 13 Apr 2012 14:19:07 -0000 1.63 +++ VirtualBox-OSE-kmod.spec 13 Apr 2012 15:53:29 -0000 1.64 @@ -3,7 +3,7 @@ # "buildforkernels newest" macro for just that build; immediately after # queuing that build enable the macro again for subsequent builds; that way # a new akmod package will only get build when a new one is actually needed -%define buildforkernels current +%define buildforkernels akmod # In prerelease builds (such as betas), this package has the same # major version number, while the kernel module abi is not guarranteed @@ -18,7 +18,7 @@ Name: VirtualBox-OSE-kmod Version: 4.1.12 -Release: 1%{?dist}.1 +Release: 2%{?dist}.1 Summary: Kernel module for VirtualBox-OSE Group: System Environment/Kernel @@ -100,6 +100,9 @@ %changelog +* Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-2.1 +- Just build akmods + * Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-1.1 - New release

12 years, 7 months

1
0
0 / 0

rpms/realcrypt/F-17 noexecstack.patch, NONE, 1.1 realcrypt-7.1a-rebranding.patch, NONE, 1.1 realcrypt.spec, 1.19, 1.20 sources, 1.8, 1.9 realcrypt-7.0a-rebranding.patch, 1.2, NONE

by Leigh Scott

Author: leigh123linux Update of /cvs/nonfree/rpms/realcrypt/F-17 In directory se02.es.rpmfusion.net:/tmp/cvs-serv11722 Modified Files: realcrypt.spec sources Added Files: noexecstack.patch realcrypt-7.1a-rebranding.patch Removed Files: realcrypt-7.0a-rebranding.patch Log Message: * Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 - update to 7.1a - harden build noexecstack.patch: Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- NEW FILE noexecstack.patch --- --- truecrypt-7.1a-source/Makefile 2012-02-07 10:36:48.000000000 +0000 +++ truecrypt-7.1a-source/Makefile 2012-04-13 15:51:19.007700207 +0100 @@ -39,7 +39,7 @@ export CFLAGS := -Wall export CXXFLAGS := -Wall -Wno-unused-parameter C_CXX_FLAGS := -MMD -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES -I$(BASE_DIR) -I$(BASE_DIR)/Crypto export ASFLAGS := -Ox -D __GNUC__ -export LFLAGS := +export LFLAGS := -Wl,-z,noexecstack export PKG_CONFIG_PATH ?= /usr/local/lib/pkgconfig realcrypt-7.1a-rebranding.patch: Common/Language.xml | 638 ++++++------ Main/CommandLineInterface.cpp | 2 truecrypt-7.0a-source/Common/Tcdefs.h | 10 truecrypt-7.0a-source/Core/Unix/CoreService.cpp | 2 truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp | 8 truecrypt-7.0a-source/Core/Unix/CoreUnix.h | 2 truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp | 4 truecrypt-7.0a-source/Driver/Fuse/FuseService.h | 2 truecrypt-7.0a-source/Main/Application.h | 2 truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp | 4 truecrypt-7.0a-source/Main/Forms/Forms.cpp | 18 truecrypt-7.0a-source/Main/Forms/Forms.h | 14 truecrypt-7.0a-source/Main/Forms/MainFrame.cpp | 2 truecrypt-7.0a-source/Main/Forms/MainFrame.h | 2 truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp | 2 truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp | 2 truecrypt-7.0a-source/Main/LanguageStrings.cpp | 20 truecrypt-7.0a-source/Main/UserInterface.cpp | 42 truecrypt-7.0a-source/Makefile | 2 truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp | 4 truecrypt-7.1a-source/Main/GraphicUserInterface.cpp | 51 21 files changed, 397 insertions(+), 436 deletions(-) --- NEW FILE realcrypt-7.1a-rebranding.patch --- --- truecrypt-7.1a-source.orig//Common/Language.xml +++ truecrypt-7.1a-source/Common/Language.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="utf-8"?> -<TrueCrypt> +<RealCrypt> <localization prog-version="7.1a">  <language langid="en" name="English" en-name="English" version="0.0.0" translators="" /> @@ -12,21 +12,21 @@ <control lang="en" key="IDCANCEL">Cancel</control> <control lang="en" key="IDC_ALL_USERS">Install &for all users</control> <control lang="en" key="IDC_BROWSE">Bro&wse...</control> - <control lang="en" key="IDC_DESKTOP_ICON">Add TrueCrypt icon to &desktop</control> + <control lang="en" key="IDC_DESKTOP_ICON">Add RealCrypt icon to &desktop</control> <control lang="en" key="IDC_DONATE">Donate now...</control> - <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with TrueCrypt</control> + <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with RealCrypt</control> <control lang="en" key="IDC_OPEN_CONTAINING_FOLDER">&Open the destination location when finished</control> - <control lang="en" key="IDC_PROG_GROUP">Add TrueCrypt to &Start menu</control> + <control lang="en" key="IDC_PROG_GROUP">Add RealCrypt to &Start menu</control> <control lang="en" key="IDC_SYSTEM_RESTORE">Create System &Restore point</control> <control lang="en" key="IDC_UNINSTALL">&Uninstall</control> <control lang="en" key="IDC_WIZARD_MODE_EXTRACT_ONLY">&Extract</control> <control lang="en" key="IDC_WIZARD_MODE_INSTALL">&Install</control> - <control lang="en" key="IDD_INSTL_DLG">TrueCrypt Setup Wizard</control> - <control lang="en" key="IDD_UNINSTALL">Uninstall TrueCrypt</control> + <control lang="en" key="IDD_INSTL_DLG">RealCrypt Setup Wizard</control> + <control lang="en" key="IDD_UNINSTALL">Uninstall RealCrypt</control> <control lang="en" key="IDHELP">&Help</control> <control lang="en" key="IDT_EXTRACT_DESTINATION">Please select or type the location where you want to place the extracted files:</control> - <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the TrueCrypt program files. If the specified folder does not exist, it will be automatically created.</control> - <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove TrueCrypt from this system.</control> + <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the RealCrypt program files. If the specified folder does not exist, it will be automatically created.</control> + <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove RealCrypt from this system.</control> <control lang="en" key="IDC_ABORT_BUTTON">Abort</control> <control lang="en" key="IDC_BENCHMARK">&Benchmark</control> <control lang="en" key="IDC_CIPHER_TEST">&Test</control> @@ -38,7 +38,7 @@ <control lang="en" key="IDC_FILE_CONTAINER">Create an encrypted file container</control> <control lang="en" key="IDC_GB">&GB</control> <control lang="en" key="IDC_HIDDEN_SYSENC_INFO_LINK">More information</control> - <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden TrueCrypt volume </control> + <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden RealCrypt volume </control> <control lang="en" key="IDC_HIDDEN_VOL_HELP">More information about hidden volumes</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_DIRECT">Direct mode</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_FULL">Normal mode</control> @@ -60,13 +60,13 @@ <control lang="en" key="IDC_SHOW_PASSWORD">&Display password</control> <control lang="en" key="IDC_SHOW_PASSWORD_SINGLE">&Display password</control> <control lang="en" key="IDC_SINGLE_BOOT">Single-boot</control> - <control lang="en" key="IDC_STD_VOL">Standard TrueCrypt volume</control> + <control lang="en" key="IDC_STD_VOL">Standard RealCrypt volume</control> <control lang="en" key="IDC_SYSENC_HIDDEN">Hi&dden</control> <control lang="en" key="IDC_SYSENC_NORMAL">Normal</control> <control lang="en" key="IDC_SYS_DEVICE">Encrypt the system partition or entire system drive</control> <control lang="en" key="IDC_SYS_PARTITION">Encrypt the Windows system partition</control> <control lang="en" key="IDC_WHOLE_SYS_DRIVE">Encrypt the whole drive</control> - <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDT_CLUSTER">Cluster </control> <control lang="en" key="IDT_COLLECTING_RANDOM_DATA_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Next to continue.</control> <control lang="en" key="IDT_CONFIRM">&Confirm:</control> @@ -96,8 +96,8 @@ <control lang="en" key="IDCLOSE">Close</control> <control lang="en" key="IDC_ALLOW_ESC_PBA_BYPASS">Allow pre-boot &authentication to be bypassed by pressing the Esc key (enables boot manager)</control> <control lang="en" key="IDC_AUTORUN_DISABLE">Do nothing</control> - <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount TrueCrypt volume (specified below)</control> - <control lang="en" key="IDC_AUTORUN_START">&Start TrueCrypt</control> + <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount RealCrypt volume (specified below)</control> + <control lang="en" key="IDC_AUTORUN_START">&Start RealCrypt</control> <control lang="en" key="IDC_AUTO_DETECT_PKCS11_MODULE">Auto-&Detect Library</control> <control lang="en" key="IDC_BOOT_LOADER_CACHE_PASSWORD">&Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)</control> <control lang="en" key="IDC_BROWSE_DIRS">Browse...</control> @@ -105,7 +105,7 @@ <control lang="en" key="IDC_CACHE">Cache passwords and keyfil&es in memory</control> <control lang="en" key="IDC_CLOSE_BKG_TASK_WHEN_NOVOL">Exit when there are no mounted volumes</control> <control lang="en" key="IDC_CLOSE_TOKEN_SESSION_AFTER_MOUNT">&Close token session (log out) after a volume is successfully mounted</control> - <control lang="en" key="IDC_COPY_WIZARD">Include TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDC_COPY_WIZARD">Include RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDC_CREATE">Create</control> <control lang="en" key="IDC_CREATE_VOLUME">&Create Volume</control> <control lang="en" key="IDC_DISABLE_BOOT_LOADER_OUTPUT">Do not &show any texts in the pre-boot authentication screen (except the below custom message)</control> @@ -148,8 +148,8 @@ <control lang="en" key="IDC_PREF_DISMOUNT_POWERSAVING">Entering power saving mode</control> <control lang="en" key="IDC_PREF_DISMOUNT_SCREENSAVER">Screen saver is launched</control> <control lang="en" key="IDC_PREF_FORCE_AUTO_DISMOUNT">Force auto-dismount even if volume contains open files or directories</control> - <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted TrueCrypt volumes</control> - <control lang="en" key="IDC_PREF_LOGON_START">Start TrueCrypt Background Task</control> + <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted RealCrypt volumes</control> + <control lang="en" key="IDC_PREF_LOGON_START">Start RealCrypt Background Task</control> <control lang="en" key="IDC_PREF_MOUNT_READONLY">Mount volumes as read-only</control> <control lang="en" key="IDC_PREF_MOUNT_REMOVABLE">Mount volumes as removable media</control> <control lang="en" key="IDC_PREF_OPEN_EXPLORER">Open Explorer window for successfully mounted volume</control> @@ -169,17 +169,17 @@ <control lang="en" key="IDC_VOLUME_PROPERTIES">&Volume Properties...</control> <control lang="en" key="IDC_VOLUME_TOOLS">Volume &Tools...</control> <control lang="en" key="IDC_WIPE_CACHE">&Wipe Cache</control> - <control lang="en" key="IDD_FAVORITE_VOLUMES">TrueCrypt - Favorite Volumes</control> - <control lang="en" key="IDD_HOTKEYS_DLG">TrueCrypt - System-Wide Hot Keys</control> - <control lang="en" key="IDD_MOUNT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_FAVORITE_VOLUMES">RealCrypt - Favorite Volumes</control> + <control lang="en" key="IDD_HOTKEYS_DLG">RealCrypt - System-Wide Hot Keys</control> + <control lang="en" key="IDD_MOUNT_DLG">RealCrypt</control> <control lang="en" key="IDD_PASSWORDCHANGE_DLG">Change Password or Keyfiles</control> - <control lang="en" key="IDD_PASSWORD_DLG">Enter TrueCrypt Volume Password</control> - <control lang="en" key="IDD_PERFORMANCE_SETTINGS">TrueCrypt - Performance Options</control> - <control lang="en" key="IDD_PREFERENCES_DLG">TrueCrypt - Preferences</control> - <control lang="en" key="IDD_SYSENC_SETTINGS">TrueCrypt - System Encryption Settings</control> - <control lang="en" key="IDD_TOKEN_PREFERENCES">TrueCrypt - Security Token Preferences</control> - <control lang="en" key="IDD_TRAVELER_DLG">TrueCrypt Traveler Disk Setup</control> - <control lang="en" key="IDD_VOLUME_PROPERTIES">TrueCrypt Volume Properties</control> + <control lang="en" key="IDD_PASSWORD_DLG">Enter RealCrypt Volume Password</control> + <control lang="en" key="IDD_PERFORMANCE_SETTINGS">RealCrypt - Performance Options</control> + <control lang="en" key="IDD_PREFERENCES_DLG">RealCrypt - Preferences</control> + <control lang="en" key="IDD_SYSENC_SETTINGS">RealCrypt - System Encryption Settings</control> + <control lang="en" key="IDD_TOKEN_PREFERENCES">RealCrypt - Security Token Preferences</control> + <control lang="en" key="IDD_TRAVELER_DLG">RealCrypt Traveler Disk Setup</control> + <control lang="en" key="IDD_VOLUME_PROPERTIES">RealCrypt Volume Properties</control> <control lang="en" key="IDM_ABOUT">About</control> <control lang="en" key="IDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume...</control> <control lang="en" key="IDM_ADD_VOLUME_TO_FAVORITES">Add Mounted Volume to Favorites...</control> @@ -241,7 +241,7 @@ <control lang="en" key="IDM_VERSION_HISTORY">Version History</control> <control lang="en" key="IDM_VOLUME_PROPERTIES">Volume Properties</control> <control lang="en" key="IDM_VOLUME_WIZARD">Volume Creation Wizard</control> - <control lang="en" key="IDM_WEBSITE">TrueCrypt Website</control> + <control lang="en" key="IDM_WEBSITE">RealCrypt Website</control> <control lang="en" key="IDM_WIPE_CACHE">Wipe Cached Passwords</control> <control lang="en" key="IDOK">OK</control> <control lang="en" key="IDT_ACCELERATION_OPTIONS">Hardware Acceleration</control> @@ -270,8 +270,8 @@ <control lang="en" key="IDT_PKCS5_PRF">PKCS-5 PRF:</control> <control lang="en" key="IDT_PW_CACHE_OPTIONS">Password Cache</control> <control lang="en" key="IDT_SECURITY_OPTIONS">Security Options</control> - <control lang="en" key="IDT_TASKBAR_ICON">TrueCrypt Background Task</control> - <control lang="en" key="IDT_TRAVELER_MOUNT">TrueCrypt volume to mount (relative to traveler disk root):</control> + <control lang="en" key="IDT_TASKBAR_ICON">RealCrypt Background Task</control> + <control lang="en" key="IDT_TRAVELER_MOUNT">RealCrypt volume to mount (relative to traveler disk root):</control> <control lang="en" key="IDT_TRAVEL_INSERTION">Upon insertion of traveler disk: </control> <control lang="en" key="IDT_TRAVEL_ROOT">Create traveler disk files at (traveler disk root directory):</control> <control lang="en" key="IDT_VOLUME">Volume</control> @@ -306,18 +306,18 @@ <control lang="en" key="IDC_TOKEN_FILES_ADD">Add &Token Files...</control> <control lang="en" key="IDC_USE_EMBEDDED_HEADER_BAK">Use backup header embedded in &volume if available</control> <control lang="en" key="IDC_XTS_MODE_ENABLED">XTS mode</control> - <control lang="en" key="IDD_ABOUT_DLG">About TrueCrypt</control> - <control lang="en" key="IDD_BENCHMARK_DLG">TrueCrypt - Encryption Algorithm Benchmark</control> - <control lang="en" key="IDD_CIPHER_TEST_DLG">TrueCrypt - Test Vectors</control> + <control lang="en" key="IDD_ABOUT_DLG">About RealCrypt</control> + <control lang="en" key="IDD_BENCHMARK_DLG">RealCrypt - Encryption Algorithm Benchmark</control> + <control lang="en" key="IDD_CIPHER_TEST_DLG">RealCrypt - Test Vectors</control> <control lang="en" key="IDD_COMMANDHELP_DLG">Command Line Help</control> - <control lang="en" key="IDD_KEYFILES">TrueCrypt - Keyfiles</control> - <control lang="en" key="IDD_KEYFILE_GENERATOR">TrueCrypt - Keyfile Generator</control> - <control lang="en" key="IDD_LANGUAGE">TrueCrypt - Language</control> - <control lang="en" key="IDD_MOUNT_OPTIONS">TrueCrypt - Mount Options</control> + <control lang="en" key="IDD_KEYFILES">RealCrypt - Keyfiles</control> + <control lang="en" key="IDD_KEYFILE_GENERATOR">RealCrypt - Keyfile Generator</control> + <control lang="en" key="IDD_LANGUAGE">RealCrypt - Language</control> + <control lang="en" key="IDD_MOUNT_OPTIONS">RealCrypt - Mount Options</control> <control lang="en" key="IDD_NEW_TOKEN_KEYFILE">New Security Token Keyfile Properties</control> - <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">TrueCrypt - Random Pool Enrichment</control> + <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">RealCrypt - Random Pool Enrichment</control> <control lang="en" key="IDD_RAWDEVICES_DLG">Select a Partition or Device</control> - <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">RealCrypt</control> <control lang="en" key="IDD_TOKEN_KEYFILES">Security Token Keyfiles</control> <control lang="en" key="IDD_TOKEN_PASSWORD">Security token password/PIN required</control> <control lang="en" key="IDT_ACTIVE_LANG_PACK">Active language pack</control> @@ -359,15 +359,15 @@ <string lang="en" key="ACCESSMODEFAIL">The read-only attribute on your old volume could not be changed. Please check the file access permissions.</string> <string lang="en" key="ACCESS_DENIED">Error: Access denied.\n\nThe partition you are trying to access is either 0 sectors long, or it is the boot device.</string> <string lang="en" key="ADMINISTRATOR">Administrator</string> - <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the TrueCrypt driver, you need to be logged into an account with administrator privileges.</string> + <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the RealCrypt driver, you need to be logged into an account with administrator privileges.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_DEVICES">Please note that in order to encrypt/format a partition/device you need to be logged into an account with administrator privileges.\n\nThis does not apply to file-hosted volumes.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_HIDVOL">In order to create a hidden volume you need to be logged into an account with administrator privileges.\n\nContinue?</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_NTFS">Please note that in order to format the volume as NTFS you need to be logged into an account with administrator privileges.\n\nWithout administrator privileges, you can format the volume as FAT.</string> <string lang="en" key="AES_HELP">FIPS-approved cipher (Rijndael, published in 1998) that may be used by U.S. government departments and agencies to protect classified information up to the Top Secret level. 256-bit key, 128-bit block, 14 rounds (AES-256). Mode of operation is XTS.</string> <string lang="en" key="ALREADY_MOUNTED">Volume is already mounted.</string> - <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nTrueCrypt installation may be corrupted.</string> + <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nRealCrypt installation may be corrupted.</string> <string lang="en" key="ERR_NOT_ENOUGH_RANDOM_DATA">CAUTION: There is not enough data in the Random Number Generator pool to provide the requested amount of random data.\n\nYou should not proceed any further. Please select 'Report a Bug' from the Help menu, and report this error.</string> - <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with TrueCrypt. Therefore, please do NOT report this as a bug/problem in TrueCrypt and please do NOT ask for help with this in the TrueCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> + <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with RealCrypt. Therefore, please do NOT report this as a bug/problem in RealCrypt and please do NOT ask for help with this in the RealCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> <string lang="en" key="DEVICE_NOT_READY_ERROR">If you are accessing a drive for removable media, please make sure that a medium is inserted in the drive. The drive/medium may also be damaged (there may be a physical defect on it) or a cable may be damaged/disconnected.</string> <string lang="en" key="WHOLE_DRIVE_ENCRYPTION_PREVENTED_BY_DRIVERS">Your system appears to be using custom chipset drivers containing a bug that prevents encryption of the whole system drive.\n\nPlease try updating or uninstalling any custom (non-Microsoft) chipset drivers before proceeding. If it does not help, try encrypting the system partition only.</string> <string lang="en" key="BAD_DRIVE_LETTER">Invalid drive letter.</string> @@ -377,13 +377,13 @@ <string lang="en" key="CAPSLOCK_ON">Warning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="VOLUME_TYPE_TITLE">Volume Type</string> <string lang="en" key="HIDDEN_VOLUME_TYPE_HELP">It may happen that you are forced by somebody to reveal the password to an encrypted volume. There are many situations where you cannot refuse to reveal the password (for example, due to extortion). Using a so-called hidden volume allows you to solve such situations without revealing the password to your volume.</string> - <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal TrueCrypt volume.</string> + <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal RealCrypt volume.</string> <string lang="en" key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</string> <string lang="en" key="CIPHER_HIDVOL_HOST_TITLE">Outer Volume Encryption Options</string> <string lang="en" key="CIPHER_HIDVOL_TITLE">Hidden Volume Encryption Options</string> <string lang="en" key="CIPHER_TITLE">Encryption Options</string> <string lang="en" key="CLEAN_WINMRU_FAILED">WARNING: Failed to clear the path of the last selected volume/keyfile (remembered by file selector)!</string> - <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. TrueCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in TrueCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> + <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. RealCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in RealCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> <string lang="en" key="CREATE_FAILED">Failed to create volume %hs</string> <string lang="en" key="DEVICE_FREE_BYTES">Size of %hs is %.2f bytes</string> <string lang="en" key="DEVICE_FREE_KB">Size of %hs is %.2f KB</string> @@ -393,20 +393,20 @@ <string lang="en" key="DEVICE_FREE_PB">Size of %hs is %.2f PB</string> <string lang="en" key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</string> <string lang="en" key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</string> - <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in TrueCrypt may be wrong now. Therefore, exit the TrueCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf TrueCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> + <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in RealCrypt may be wrong now. Therefore, exit the RealCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf RealCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> <string lang="en" key="INPLACE_ENC_CANT_LOCK_OR_DISMOUNT_FILESYS">Error: The filesystem could not be locked and/or dismounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</string> <string lang="en" key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable TrueCrypt to format it safely.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable TrueCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable RealCrypt to format it safely.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable RealCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> <string lang="en" key="WHOLE_NONSYS_DEVICE_ENC_CONFIRM">Warning: If you encrypt the entire device (as opposed to encrypting only a partition on it), operating systems will consider the device as new, empty, and unformatted (as it will contain no partition table) and may spontaneously initialize the device (or ask you if you want to do so), which may damage the volume. Furthermore, it will not be possible to consistently mount the volume as favorite (e.g. when the drive number changes) or to assign a favorite-volume label to it.\n\nTo avoid that you may want to consider creating a partition on the device and encrypting the partition instead.\n\nAre you sure want to encrypt the entire device?</string> - <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main TrueCrypt window (alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main TrueCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the TrueCrypt FAQ, and assign it to another partition/device).</string> + <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main RealCrypt window (alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main RealCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the RealCrypt FAQ, and assign it to another partition/device).</string> <string lang="en" key="OS_NOT_SUPPORTED_FOR_NONSYS_INPLACE_ENC">In-place encryption of non-system volumes is not supported on the version of the operating system you are currently using (it is supported only on Windows Vista and later versions of Windows).\n\nThe reason is that this version of Windows does not support shrinking of a filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> <string lang="en" key="ONLY_NTFS_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nNote: The reason is that Windows does not support shrinking of other types of filesystems (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> - <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted TrueCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. TrueCrypt cannot encrypt it in place.</string> - <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a TrueCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted TrueCrypt volume (that has been created and mounted in step 1). That way, you will create a TrueCrypt-encrypted backup of the data.\n\n3) Create a TrueCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the TrueCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup TrueCrypt volume (created and mounted in step 1) to the mounted TrueCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> - <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted TrueCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> + <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted RealCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. RealCrypt cannot encrypt it in place.</string> + <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a RealCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted RealCrypt volume (that has been created and mounted in step 1). That way, you will create a RealCrypt-encrypted backup of the data.\n\n3) Create a RealCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the RealCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup RealCrypt volume (created and mounted in step 1) to the mounted RealCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> + <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted RealCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> <string lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="DISK_FREE_BYTES">Free space on drive %hs is %.2f bytes.</string> @@ -416,47 +416,47 @@ <string lang="en" key="DISK_FREE_TB">Free space on drive %hs is %.2f TB</string> <string lang="en" key="DISK_FREE_PB">Free space on drive %hs is %.2f PB</string> <string lang="en" key="DRIVELETTERS">Could not get available drive letters.</string> - <string lang="en" key="DRIVER_NOT_FOUND">Error: TrueCrypt driver not found.\n\nPlease copy the files 'truecrypt.sys' and 'truecrypt-x64.sys' to the directory where the main TrueCrypt application (TrueCrypt.exe) is located.</string> - <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the TrueCrypt driver is currently running.\n\nIf you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already installed, you must uninstall it first (or upgrade it using the TrueCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > TrueCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > TrueCrypt > Remove.\n\nSimilarly, if you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> + <string lang="en" key="DRIVER_NOT_FOUND">Error: RealCrypt driver not found.\n\nPlease copy the files 'realcrypt.sys' and 'realcrypt-x64.sys' to the directory where the main RealCrypt application (RealCrypt.exe) is located.</string> + <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the RealCrypt driver is currently running.\n\nIf you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already installed, you must uninstall it first (or upgrade it using the RealCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > RealCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > RealCrypt > Remove.\n\nSimilarly, if you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> <string lang="en" key="ERR_CIPHER_INIT_FAILURE">Error: Cipher initialization failure.</string> <string lang="en" key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</string> - <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and TrueCrypt must be terminated. If this is caused by a bug in TrueCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- TrueCrypt component name\n- Checksum of TrueCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- TrueCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> - <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nNote that this error has not been caused by TrueCrypt (so the TrueCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> - <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> - <string lang="en" key="EXCEPTION_REPORT_TITLE">TrueCrypt Critical Error</string> - <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">TrueCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want TrueCrypt to check whether a bug in TrueCrypt could have caused the system crash?</string> - <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want TrueCrypt to continue detecting system crashes?</string> - <string lang="en" key="NO_MINIDUMP_FOUND">TrueCrypt found no system crash minidump file.</string> + <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and RealCrypt must be terminated. If this is caused by a bug in RealCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- RealCrypt component name\n- Checksum of RealCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- RealCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> + <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nNote that this error has not been caused by RealCrypt (so the RealCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> + <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> + <string lang="en" key="EXCEPTION_REPORT_TITLE">RealCrypt Critical Error</string> + <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">RealCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want RealCrypt to check whether a bug in RealCrypt could have caused the system crash?</string> + <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want RealCrypt to continue detecting system crashes?</string> + <string lang="en" key="NO_MINIDUMP_FOUND">RealCrypt found no system crash minidump file.</string> <string lang="en" key="ASK_DELETE_KERNEL_CRASH_DUMP">Do you want to delete the Windows crash dump file to free up disk space?</string> - <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, TrueCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the truecrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> - <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, TrueCrypt will analyze the system crash. This may take up to several minutes.</string> + <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, RealCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the realcrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> + <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, RealCrypt will analyze the system crash. This may take up to several minutes.</string> <string lang="en" key="DEBUGGER_NOT_FOUND">Please make sure the environment variable 'PATH' includes the path to 'kd.exe' (Kernel Debugger).</string> - <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that TrueCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> + <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that RealCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> <string lang="en" key="SYSTEM_CRASH_UPDATE_DRIVER">Results of the analysis indicate that updating the following driver might solve this issue: </string> - <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in TrueCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> + <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in RealCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> <string lang="en" key="ASK_SEND_ERROR_REPORT">Do you want to send us the above error report?</string> <string lang="en" key="ENCRYPT">&Encrypt</string> <string lang="en" key="DECRYPT">&Decrypt</string> <string lang="en" key="PERMANENTLY_DECRYPT">&Permanently Decrypt</string> <string lang="en" key="EXIT">Exit</string> <string lang="en" key="EXT_PARTITION">Please create a logical drive for this extended partition, and then try again.</string> - <string lang="en" key="FILE_HELP">A TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, TrueCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created TrueCrypt container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container that you are about to create now.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, TrueCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container you are about to create now.</string> - <string lang="en" key="DEVICE_HELP">Encrypted device-hosted TrueCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> - <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted TrueCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> + <string lang="en" key="FILE_HELP">A RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, RealCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created RealCrypt container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container that you are about to create now.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, RealCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container you are about to create now.</string> + <string lang="en" key="DEVICE_HELP">Encrypted device-hosted RealCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> + <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted RealCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> <string lang="en" key="DEVICE_HELP_HIDDEN_HOST_VOL">\nSelect the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nOuter volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Outer volumes can also be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the TrueCrypt volume within which you wish to create a hidden volume.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the RealCrypt volume within which you wish to create a hidden volume.</string> <string lang="en" key="FILE_IN_USE">WARNING: The host file/device is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device (for example, antivirus or backup applications) should be closed before mounting the volume.\n\nContinue mounting?</string> <string lang="en" key="FILE_IN_USE_FAILED">Error: Cannot mount volume. The host file/device is already in use. Attempt to mount without exclusive access failed as well.</string> <string lang="en" key="FILE_OPEN_FAILED">The file could not be opened.</string> <string lang="en" key="FILE_TITLE">Volume Location</string> <string lang="en" key="FILESYS_PAGE_TITLE">Large Files</string> - <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this TrueCrypt volume?</string> - <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, TrueCrypt will choose a suitable default file system for the TrueCrypt volume (you will be able to select a file system in the next step).</string> + <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this RealCrypt volume?</string> + <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, RealCrypt will choose a suitable default file system for the RealCrypt volume (you will be able to select a file system in the next step).</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_TITLE">Volume Creation Mode</string> - <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted TrueCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> + <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted RealCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_INPLACE_HELP">The entire selected partition and all data stored on it will be encrypted in place. If the partition is empty, you should choose the other option (the volume will be created much faster).</string> <string lang="en" key="NOTE_BEGINNING">Note: </string> <string lang="en" key="RESUME">&Resume</string> @@ -471,52 +471,52 @@ <string lang="en" key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</string> <string lang="en" key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</string> <string lang="en" key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system TrueCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> + <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system RealCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> <string lang="en" key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</string> - <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe TrueCrypt volume has been created and is ready for use. If you wish to create another TrueCrypt volume, click Next. Otherwise, click Exit.</string> - <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden TrueCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> + <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe RealCrypt volume has been created and is ready for use. If you wish to create another RealCryptRealCrypt volume, click Next. Otherwise, click Exit.</string> + <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden RealCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_TITLE">Volume Fully Encrypted</string> - <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED TRUECRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN TRUECRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main TrueCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted TrueCrypt volume now) and is ready for use.</string> - <string lang="en" key="FORMAT_FINISHED_INFO">The TrueCrypt volume has been successfully created.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED REALCRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN REALCRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main RealCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted RealCrypt volume now) and is ready for use.</string> + <string lang="en" key="FORMAT_FINISHED_INFO">The RealCrypt volume has been successfully created.</string> <string lang="en" key="FORMAT_FINISHED_TITLE">Volume Created</string> <string lang="en" key="FORMAT_HELP">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Format to create the volume.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_HELP">Click Format to create the outer volume. For more information, please refer to the documentation.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_TITLE">Outer Volume Format</string> <string lang="en" key="FORMAT_HIDVOL_TITLE">Hidden Volume Format</string> <string lang="en" key="FORMAT_TITLE">Volume Format</string> - <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the TrueCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal TrueCrypt volume and then a hidden TrueCrypt volume within it. Inexperienced users should always select this option.</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing TrueCrypt volume. It will be assumed that you have already created a TrueCrypt volume that is suitable to host the hidden volume.</string> + <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the RealCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal RealCrypt volume and then a hidden RealCrypt volume within it. Inexperienced users should always select this option.</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing RealCrypt volume. It will be assumed that you have already created a RealCrypt volume that is suitable to host the hidden volume.</string> <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_TITLE">Volume Creation Mode</string> <string lang="en" key="HIDVOL_FORMAT_FINISHED_TITLE">Hidden Volume Created</string> - <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden TrueCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE TRUECRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> + <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden RealCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE REALCRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> <string lang="en" key="FIRST_HIDDEN_OS_BOOT_INFO">You have started the hidden operating system. As you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system. However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the original system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that will be used for the decoy operating system).\n\n\nPlease click Next to continue.</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP">Outer volume has been successfully created and mounted as drive %hc:. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, cluster bitmap of the outer volume will be scanned to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. Cluster bitmap scanning ensures that no data on the outer volume are overwritten by the hidden volume.</string> <string lang="en" key="HIDVOL_HOST_FILLING_TITLE">Outer Volume Contents</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nIn the next steps, you will set the options for the outer volume (within which the hidden volume will be created later on). </string> - <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer TrueCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> + <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer RealCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_TITLE">Outer Volume</string> <string lang="en" key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system.\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</string> - <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).</string> + <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).</string> <string lang="en" key="HIDVOL_PRE_CIPHER_HELP">\n\nThe volume cluster bitmap has been scanned and the maximum possible size of the hidden volume has been determined. In the next steps you will set the options, the size, and the password for the hidden volume.</string> <string lang="en" key="HIDVOL_PRE_CIPHER_TITLE">Hidden Volume</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! TrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time TrueCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new TrueCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! RealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time RealCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new RealCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> <string lang="en" key="CANNOT_SATISFY_OVER_4G_FILE_SIZE_REQ">You have indicated intent to store files larger than 4 GB on the volume. This requires the volume to be formatted as NTFS, which, however, will not be possible.</string> - <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden TrueCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by TrueCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> - <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal TrueCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the TrueCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden TrueCrypt volumes are mounted as read-only (no data can be written to such filesystems or TrueCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden TrueCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden TrueCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. TrueCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> - <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal TrueCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a TrueCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> + <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden RealCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by RealCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> + <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal RealCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the RealCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden RealCrypt volumes are mounted as read-only (no data can be written to such filesystems or RealCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden RealCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden RealCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. RealCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> + <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal RealCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a RealCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> <string lang="en" key="CONFIRM_RESTART">Your computer must be restarted.\n\nDo you want to restart it now?</string> <string lang="en" key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">An error occurred when obtaining the system encryption status.</string> <string lang="en" key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</string> <string lang="en" key="INIT_RAND">Failed to initialize the random number generator!</string> <string lang="en" key="INIT_REGISTER">Unable to initialize the application. Failed to register the Dialog class.</string> <string lang="en" key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</string> - <string lang="en" key="INTRO_TITLE">TrueCrypt Volume Creation Wizard</string> + <string lang="en" key="INTRO_TITLE">RealCrypt Volume Creation Wizard</string> <string lang="en" key="MAX_HIDVOL_SIZE_BYTES">Maximum possible hidden volume size for this volume is %.2f bytes.</string> <string lang="en" key="MAX_HIDVOL_SIZE_KB">Maximum possible hidden volume size for this volume is %.2f KB.</string> <string lang="en" key="MAX_HIDVOL_SIZE_MB">Maximum possible hidden volume size for this volume is %.2f MB.</string> @@ -524,13 +524,13 @@ <string lang="en" key="MOUNTED_NOPWCHANGE">Volume password/keyfiles cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNTED_NO_PKCS5_PRF_CHANGE">The header key derivation algorithm cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNT_BUTTON">&Mount</string> - <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of TrueCrypt is required to mount this volume.</string> - <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'TrueCrypt Format.exe' is in the folder from which 'TrueCrypt.exe' was launched. If it is not, please reinstall TrueCrypt, or locate 'TrueCrypt Format.exe' on your disk and run it.</string> + <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of RealCrypt is required to mount this volume.</string> + <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'RealCrypt Format.exe' is in the folder from which 'RealCrypt.exe' was launched. If it is not, please reinstall RealCrypt, or locate 'RealCrypt Format.exe' on your disk and run it.</string> <string lang="en" key="NEXT">&Next ></string> <string lang="en" key="FINALIZE">&Finish</string> <string lang="en" key="INSTALL">&Install</string> <string lang="en" key="EXTRACT">E&xtract</string> - <string lang="en" key="NODRIVER">Unable to connect to the TrueCrypt device driver. TrueCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> + <string lang="en" key="NODRIVER">Unable to connect to the RealCrypt device driver. RealCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> <string lang="en" key="NOFONT">Error occurred when loading/preparing fonts.</string> <string lang="en" key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</string> <string lang="en" key="DRIVE_LETTER_UNAVAILABLE">Drive letter not available.</string> @@ -543,37 +543,37 @@ <string lang="en" key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</string> <string lang="en" key="OPENFILES_DRIVER">The driver is unable to dismount the volume. Some files located on the volume are probably still open.</string> <string lang="en" key="OPENFILES_LOCK">Unable to lock the volume. There are still open files on the volume. Therefore, it cannot be dismounted.</string> - <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">TrueCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> - <string lang="en" key="OPEN_VOL_TITLE">Select a TrueCrypt Volume</string> + <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">RealCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> + <string lang="en" key="OPEN_VOL_TITLE">Select a RealCrypt Volume</string> <string lang="en" key="OPEN_TITLE">Specify Path and File Name</string> <string lang="en" key="SELECT_PKCS11_MODULE">Select PKCS #11 Library</string> <string lang="en" key="OUTOFMEMORY">Out of Memory</string> - <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a TrueCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a TrueCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a TrueCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the TrueCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> - <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: TRUECRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new TrueCrypt container?</string> + <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a RealCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a RealCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a RealCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the RealCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> + <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: REALCRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new RealCrypt container?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE">CAUTION: ALL FILES CURRENTLY STORED ON THE SELECTED %s '%hs'%s WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%hs'%s?</string> - <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%hs'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</string> - <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a TrueCrypt volume within it</string> + <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a RealCrypt volume within it</string> <string lang="en" key="PASSWORD">Password</string> <string lang="en" key="IDD_PCDM_CHANGE_PKCS5_PRF">Set Header Key Derivation Algorithm</string> <string lang="en" key="IDD_PCDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume</string> <string lang="en" key="IDD_PCDM_REMOVE_ALL_KEYFILES_FROM_VOL">Remove All Keyfiles from Volume</string> - <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the TrueCrypt User Guide.</string> - <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your TrueCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the TrueCrypt Rescue Disk and entering the old password). You should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your TrueCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a TrueCrypt keyfile. Note that TrueCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> + <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the RealCrypt User Guide.</string> + <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your RealCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the RealCrypt Rescue Disk and entering the old password). You should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your RealCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a RealCrypt keyfile. Note that RealCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> <string lang="en" key="KEYFILE_CHANGED">Keyfile(s) successfully added/removed.</string> <string lang="en" key="KEYFILE_EXPORTED">Keyfile exported.</string> <string lang="en" key="PKCS5_PRF_CHANGED">Header key derivation algorithm successfully set.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, TrueCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the TrueCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, RealCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the RealCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</string> <string lang="en" key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of more than 20 characters (the longer, the better). The maximum possible length is 64 characters.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HELP">Please choose a password for the hidden volume. </string> <string lang="en" key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </string> <string lang="en" key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password that you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</string> - <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, TrueCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> + <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, RealCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HOST_HELP">\nPlease choose a password for the outer volume. This will be the password that you will be able to reveal to an adversary if you are asked or forced to do so.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume.\n\nNote: The maximum possible password length is 64 characters.</string> <string lang="en" key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</string> <string lang="en" key="PASSWORD_HIDVOL_HOST_TITLE">Outer Volume Password</string> @@ -581,16 +581,16 @@ <string lang="en" key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</string> <string lang="en" key="PASSWORD_LENGTH_WARNING">WARNING: Short passwords are easy to crack using brute force techniques!\n\nWe recommend choosing a password consisting of more than 20 characters. Are you sure you want to use a short password?</string> <string lang="en" key="PASSWORD_TITLE">Volume Password</string> - <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no TrueCrypt volume found.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no TrueCrypt volume found.</string> + <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no RealCrypt volume found.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no RealCrypt volume found.</string> <string lang="en" key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nWarning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</string> <string lang="en" key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</string> - <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">TrueCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> + <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">RealCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> <string lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</string> <string lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</string> <string lang="en" key="PREV">< &Back</string> @@ -619,9 +619,9 @@ <string lang="en" key="TEST_PLAINTEXT_SIZE">The test plaintext you have supplied is too long or short.</string> <string lang="en" key="TWO_LAYER_CASCADE_HELP">Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key) and then with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> <string lang="en" key="THREE_LAYER_CASCADE_HELP">Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key), then with %hs (%d-bit key), and finally with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> - <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in TrueCrypt (it is a limitation of Windows).</string> - <string lang="en" key="TRAVELER_DISK_CREATED">TrueCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run TrueCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that TrueCrypt was run on a Windows system even if it is run in portable mode.</string> - <string lang="en" key="TC_TRAVELER_DISK">TrueCrypt Traveler Disk</string> + <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in RealCrypt (it is a limitation of Windows).</string> + <string lang="en" key="TRAVELER_DISK_CREATED">RealCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run RealCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that RealCrypt was run on a Windows system even if it is run in portable mode.</string> + <string lang="en" key="TC_TRAVELER_DISK">RealCrypt Traveler Disk</string> <string lang="en" key="TWOFISH_HELP">Designed by Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Twofish was one of the AES finalists.</string> <string lang="en" key="MORE_INFO_ABOUT">More information on %hs</string> <string lang="en" key="UNKNOWN">Unknown</string> @@ -637,10 +637,10 @@ <string lang="en" key="VOL_SIZE_WRONG">Error: Incorrect volume size.</string> <string lang="en" key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Format?</string> <string lang="en" key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, sparse-file-hosted volumes cannot provide plausible deniability (host a hidden volume). Also note that if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</string> - <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by TrueCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in TrueCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> + <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by RealCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in RealCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> <string lang="en" key="PASSWORD_CACHE_WIPED_SHORT">Password cache wiped</string> - <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the TrueCrypt driver cache have been wiped.</string> - <string lang="en" key="WRONG_VOL_TYPE">TrueCrypt cannot change the password for a foreign volume.</string> + <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the RealCrypt driver cache have been wiped.</string> + <string lang="en" key="WRONG_VOL_TYPE">RealCrypt cannot change the password for a foreign volume.</string> <string lang="en" key="SELECT_FREE_DRIVE">Please select a free drive letter from the list.</string> <string lang="en" key="SELECT_A_MOUNTED_VOLUME">Please select a mounted volume in the drive letter list.</string> <string lang="en" key="AMBIGUOUS_VOL_SELECTION">Two different mounted volumes are currently selected (one in the drive letter list and the other in the input field below the list).\n\nPlease choose the volume you wanted to select:</string> @@ -648,16 +648,16 @@ <string lang="en" key="ERR_PROCESS_KEYFILE">Error while processing keyfile!</string> <string lang="en" key="ERR_PROCESS_KEYFILE_PATH">Error processing keyfile path!</string> <string lang="en" key="ERR_KEYFILE_PATH_EMPTY">The keyfile path contains no files.\n\nPlease note that folders (and files they contain) found in keyfile search paths are ignored.</string> - <string lang="en" key="UNSUPPORTED_OS">TrueCrypt does not support this operating system.</string> - <string lang="en" key="UNSUPPORTED_BETA_OS">Error: TrueCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> + <string lang="en" key="UNSUPPORTED_OS">RealCrypt does not support this operating system.</string> + <string lang="en" key="UNSUPPORTED_BETA_OS">Error: RealCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> <string lang="en" key="ERR_MEM_ALLOC">Error: Cannot allocate memory.</string> <string lang="en" key="ERR_PERF_COUNTER">Error: Could not retrieve value of performance counter.</string> <string lang="en" key="ERR_VOL_FORMAT_BAD">Error: Bad volume format.</string> <string lang="en" key="ERR_HIDDEN_NOT_NORMAL_VOLUME">Error: You supplied a password for a hidden volume (not for a normal volume).</string> - <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a TrueCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> - <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">TrueCrypt - Legal Notices</string> + <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a RealCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> + <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">RealCrypt - Legal Notices</string> <string lang="en" key="ALL_FILES">All Files</string> - <string lang="en" key="TC_VOLUMES">TrueCrypt Volumes</string> + <string lang="en" key="TC_VOLUMES">RealCrypt Volumes</string> <string lang="en" key="DLL_FILES">Library Modules</string> <string lang="en" key="FORMAT_NTFS_STOP">NTFS formatting cannot continue.</string> <string lang="en" key="CANT_MOUNT_VOLUME">Cannot mount volume.</string> @@ -677,8 +677,8 @@ <string lang="en" key="CLUSTER_TOO_SMALL">The selected cluster size is too small for this volume size. A greater cluster size will be used instead.</string> <string lang="en" key="CANT_GET_VOLSIZE">Error: Cannot get volume size!\n\nMake sure the selected volume is not being used by the system or an application.</string> <string lang="en" key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes must not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume needs to be created within a non-dynamic container.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS">Note: The FAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT).</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS_ASK">Note that the FAT file system is more suitable for outer volumes than the NTFS file system. For example, the maximum possible size of the hidden volume will very likely be significantly greater if the outer volume is formatted as FAT (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume can reside only in the second half of the outer volume).\n\nAre you sure you want to format the outer volume as NTFS?</string> <string lang="en" key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</string> @@ -687,15 +687,15 @@ <string lang="en" key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</string> <string lang="en" key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</string> <string lang="en" key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</string> - <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two TrueCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> + <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two RealCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> <string lang="en" key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</string> <string lang="en" key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</string> - <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this TrueCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> + <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this RealCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> <string lang="en" key="CANT_ACCESS_VOL">Error: Cannot access the volume!\n\nMake sure that the selected volume exists, that it is not mounted or being used by the system or an application, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented TrueCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented TrueCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented RealCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented RealCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="CANT_DISMOUNT_OUTER_VOL">Error: Cannot dismount the outer volume!\n\nVolume cannot be dismounted if it contains files or folders being used by a program or the system.\n\nPlease close any program that might be using files or directories on the volume and click Retry.</string> <string lang="en" key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</string> <string lang="en" key="CANT_ACCESS_OUTER_VOL">Error: Cannot access the outer volume! Volume creation cannot continue.</string> @@ -745,22 +745,22 @@ <string lang="en" key="VOLUME_HEADER_DAYS"> (%I64d days ago)</string> <string lang="en" key="VOLUME_FORMAT_VERSION">Volume Format Version</string> <string lang="en" key="BACKUP_HEADER">Embedded Backup Header</string> - <string lang="en" key="TC_BOOT_LOADER_VERSION">TrueCrypt Boot Loader Version</string> + <string lang="en" key="TC_BOOT_LOADER_VERSION">RealCrypt Boot Loader Version</string> <string lang="en" key="FIRST_AVAILABLE">First available</string> <string lang="en" key="REMOVABLE_DISK">Removable Disk</string> <string lang="en" key="HARDDISK">Harddisk</string> <string lang="en" key="UNCHANGED">Unchanged</string> <string lang="en" key="SETUP_MODE_TITLE">Wizard Mode</string> <string lang="en" key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</string> - <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install TrueCrypt on this system.</string> + <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install RealCrypt on this system.</string> <string lang="en" key="SETUP_MODE_HELP_UPGRADE">Note: You can upgrade without decrypting even if the system partition/drive is encrypted or you use a hidden operating system.</string> - <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run TrueCrypt in so-called portable mode. TrueCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'TrueCrypt.exe' (then TrueCrypt will run in portable mode).</string> + <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run RealCrypt in so-called portable mode. RealCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'RealCrypt.exe' (then RealCrypt will run in portable mode).</string> <string lang="en" key="SETUP_OPTIONS_TITLE">Setup Options</string> <string lang="en" key="SETUP_OPTIONS_INFO">Here you can set various options to control the installation process.</string> <string lang="en" key="SETUP_PROGRESS_TITLE">Installing</string> - <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while TrueCrypt is being installed.</string> - <string lang="en" key="SETUP_FINISHED_TITLE_DON">TrueCrypt has been successfully installed</string> - <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">TrueCrypt has been successfully upgraded</string> + <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while RealCrypt is being installed.</string> + <string lang="en" key="SETUP_FINISHED_TITLE_DON">RealCrypt has been successfully installed</string> + <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">RealCrypt has been successfully upgraded</string> <string lang="en" key="SETUP_FINISHED_INFO_DON">Please consider making a donation. You can click Finish anytime to close the installer.</string> <string lang="en" key="EXTRACTION_OPTIONS_TITLE">Extraction Options</string> <string lang="en" key="EXTRACTION_OPTIONS_INFO">Here you can set various options to control the extraction process.</string> @@ -768,30 +768,30 @@ <string lang="en" key="EXTRACTION_FINISHED_TITLE_DON">Files successfully extracted</string> <string lang="en" key="EXTRACTION_FINISHED_INFO">All files have been successfully extracted to the destination location.</string> <string lang="en" key="AUTO_FOLDER_CREATION">If the specified folder does not exist, it will be automatically created.</string> - <string lang="en" key="SETUP_UPGRADE_DESTINATION">The TrueCrypt program files will be upgraded in the location where TrueCrypt is installed. If you need to select a different location, please uninstall TrueCrypt first.</string> - <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of TrueCrypt?</string> - <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used TrueCrypt before, we recommend that you read the chapter Beginner's Tutorial in the TrueCrypt User Guide. Do you want to view the tutorial?</string> + <string lang="en" key="SETUP_UPGRADE_DESTINATION">The RealCrypt program files will be upgraded in the location where RealCrypt is installed. If you need to select a different location, please uninstall RealCrypt first.</string> + <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of RealCrypt?</string> + <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used RealCrypt before, we recommend that you read the chapter Beginner's Tutorial in the RealCrypt User Guide. Do you want to view the tutorial?</string> <string lang="en" key="SELECT_AN_ACTION">Please select an action to perform from the following:</string> <string lang="en" key="REPAIR_REINSTALL">Repair/Reinstall</string> <string lang="en" key="UPGRADE">Upgrade</string> <string lang="en" key="UNINSTALL">Uninstall</string> - <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall TrueCrypt, you must have administrator privileges. Do you want to continue?</string> - <string lang="en" key="TC_INSTALLER_IS_RUNNING">TrueCrypt Installer is currently running on this system and performing or preparing installation or update of TrueCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall RealCrypt, you must have administrator privileges. Do you want to continue?</string> + <string lang="en" key="TC_INSTALLER_IS_RUNNING">RealCrypt Installer is currently running on this system and performing or preparing installation or update of RealCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="INSTALL_FAILED">Installation failed.</string> <string lang="en" key="UNINSTALL_FAILED">Uninstallation failed.</string> - <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official TrueCrypt website at www.truecrypt.org).</string> + <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official RealCrypt website at www.realcrypt.org).</string> <string lang="en" key="CANNOT_WRITE_FILE_X">Cannot write file %hs</string> <string lang="en" key="EXTRACTING_VERB">Extracting</string> <string lang="en" key="CANNOT_READ_FROM_PACKAGE">Cannot read data from the package.</string> <string lang="en" key="CANT_VERIFY_PACKAGE_INTEGRITY">Cannot verify the integrity of this distribution package.</string> <string lang="en" key="EXTRACTION_FAILED">Extraction failed.</string> <string lang="en" key="ROLLBACK">The installation has been rolled back.</string> - <string lang="en" key="INSTALL_OK">TrueCrypt has been successfully installed.</string> - <string lang="en" key="SETUP_UPDATE_OK">TrueCrypt has been successfully updated.</string> - <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">TrueCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> - <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade TrueCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'TrueCrypt installation'. If System Restore is not available, you should try installing the original or the new version of TrueCrypt again before you shut down or restart the system.</string> - <string lang="en" key="UNINSTALL_OK">TrueCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the TrueCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the TrueCrypt installer or created by TrueCrypt.</string> - <string lang="en" key="REMOVING_REG">Removing TrueCrypt registry entries</string> + <string lang="en" key="INSTALL_OK">RealCrypt has been successfully installed.</string> + <string lang="en" key="SETUP_UPDATE_OK">RealCrypt has been successfully updated.</string> + <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">RealCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> + <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade RealCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'RealCrypt installation'. If System Restore is not available, you should try installing the original or the new version of RealCrypt again before you shut down or restart the system.</string> + <string lang="en" key="UNINSTALL_OK">RealCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the RealCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the RealCrypt installer or created by RealCrypt.</string> + <string lang="en" key="REMOVING_REG">Removing RealCrypt registry entries</string> <string lang="en" key="ADDING_REG">Adding registry entry</string> <string lang="en" key="REMOVING_APPDATA">Removing application-specific data</string> <string lang="en" key="INSTALLING">Installing</string> @@ -805,20 +805,20 @@ <string lang="en" key="UNINSTALL_OF_FAILED">Failed to uninstall '%hs'. %hs\nDo you want to continue uninstalling?</string> <string lang="en" key="INSTALL_COMPLETED">Installation completed.</string> <string lang="en" key="CANT_CREATE_FOLDER">The folder '%hs' could not be created</string> - <string lang="en" key="CLOSE_TC_FIRST">The TrueCrypt device driver cannot be unloaded.\n\nPlease close all open TrueCrypt windows first. If it does not help, please restart Windows and then try again.</string> - <string lang="en" key="DISMOUNT_ALL_FIRST">All TrueCrypt volumes must be dismounted before installing or uninstalling TrueCrypt.</string> - <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of TrueCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of TrueCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall TrueCrypt. After you uninstall the old version of TrueCrypt, run the installer of the new version of TrueCrypt again.</string> + <string lang="en" key="CLOSE_TC_FIRST">The RealCrypt device driver cannot be unloaded.\n\nPlease close all open RealCrypt windows first. If it does not help, please restart Windows and then try again.</string> + <string lang="en" key="DISMOUNT_ALL_FIRST">All RealCrypt volumes must be dismounted before installing or uninstalling RealCrypt.</string> + <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of RealCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of RealCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall RealCrypt. After you uninstall the old version of RealCrypt, run the installer of the new version of RealCrypt again.</string> <string lang="en" key="REG_INSTALL_FAILED">The installation of the registry entries has failed</string> - <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing TrueCrypt again.</string> - <string lang="en" key="STARTING_DRIVER">Starting TrueCrypt device driver</string> + <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing RealCrypt again.</string> + <string lang="en" key="STARTING_DRIVER">Starting RealCrypt device driver</string> <string lang="en" key="DRIVER_UINSTALL_FAILED">Uninstallation of the device driver has failed. Please note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be uninstalled (or reinstalled).</string> - <string lang="en" key="INSTALLING_DRIVER">Installing TrueCrypt device driver</string> - <string lang="en" key="STOPPING_DRIVER">Stopping TrueCrypt device driver</string> - <string lang="en" key="REMOVING_DRIVER">Uninstalling TrueCrypt device driver</string> + <string lang="en" key="INSTALLING_DRIVER">Installing RealCrypt device driver</string> + <string lang="en" key="STOPPING_DRIVER">Stopping RealCrypt device driver</string> + <string lang="en" key="REMOVING_DRIVER">Uninstalling RealCrypt device driver</string> <string lang="en" key="COM_REG_FAILED">Registration of the User Account Control support library failed.</string> <string lang="en" key="COM_DEREG_FAILED">Unregistration of the User Account Control support library failed.</string> - <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the TrueCrypt driver is not (and cannot be) fully portable (whereas the TrueCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that TrueCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> - <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run TrueCrypt in portable mode (as opposed to running an installed copy of TrueCrypt), the system will ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run TrueCrypt in portable mode, TrueCrypt needs to load and start the TrueCrypt device driver. TrueCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run TrueCrypt with administrator privileges (UAC prompt).\n\nNote that if you install TrueCrypt on the system (as opposed to running TrueCrypt in portable mode), the system will NOT ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> + <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the RealCrypt driver is not (and cannot be) fully portable (whereas the RealCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that RealCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> + <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run RealCrypt in portable mode (as opposed to running an installed copy of RealCrypt), the system will ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run RealCrypt in portable mode, RealCrypt needs to load and start the RealCrypt device driver. RealCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run RealCrypt with administrator privileges (UAC prompt).\n\nNote that if you install RealCrypt on the system (as opposed to running RealCrypt in portable mode), the system will NOT ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> <string lang="en" key="CONTAINER_ADMIN_WARNING">Warning: This instance of the Volume Creation Wizard has administrator privileges.\n\nYour new volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of the Volume Creation Wizard and launch a new one without administrator privileges.\n\nDo you want to close this instance of the Volume Creation Wizard?</string> <string lang="en" key="CANNOT_DISPLAY_LICENSE">Error: Cannot display license.</string> <string lang="en" key="OUTER_VOL_WRITE_PREVENTED">Outer(!)</string> @@ -828,8 +828,8 @@ <string lang="en" key="SECONDS">s</string> <string lang="en" key="OPEN">Open</string> <string lang="en" key="DISMOUNT">Dismount</string> - <string lang="en" key="SHOW_TC">Show TrueCrypt</string> - <string lang="en" key="HIDE_TC">Hide TrueCrypt</string> + <string lang="en" key="SHOW_TC">Show RealCrypt</string> + <string lang="en" key="HIDE_TC">Hide RealCrypt</string> <string lang="en" key="TOTAL_DATA_READ">Data Read since Mount</string> <string lang="en" key="TOTAL_DATA_WRITTEN">Data Written since Mount</string> <string lang="en" key="ENCRYPTED_PORTION">Encrypted Portion</string> @@ -848,14 +848,14 @@ <string lang="en" key="PROGRESS_STATUS_ERROR">Error</string> <string lang="en" key="FAVORITE_DISCONNECTED_DEV">Device disconnected</string> <string lang="en" key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</string> - <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, TrueCrypt will be unable to mount this favorite volume if the device number changes.</string> - <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nTrueCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> - <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">TrueCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or TrueCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the TrueCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'TrueCrypt Background Task'.</string> + <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, RealCrypt will be unable to mount this favorite volume if the device number changes.</string> + <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nRealCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> + <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">RealCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or RealCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the RealCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'RealCrypt Background Task'.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</string> - <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable TrueCrypt to assign a label to the partition.</string> + <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable RealCrypt to assign a label to the partition.</string> <string lang="en" key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</string> <string lang="en" key="ENTER_PASSWORD_FOR">Enter password for %hs</string> <string lang="en" key="ENTER_PASSWORD_FOR_LABEL">Enter password for '%s'</string> @@ -863,11 +863,11 @@ <string lang="en" key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</string> <string lang="en" key="ENTER_HEADER_BACKUP_PASSWORD">Enter password for the header stored in backup file</string> <string lang="en" key="KEYFILE_CREATED">Keyfile has been successfully created.</string> - <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! TrueCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> + <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! RealCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> <string lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</string> <string lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</string> <string lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</string> - <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that TrueCrypt determines the type through the process of trial and error).</string> + <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that RealCrypt determines the type through the process of trial and error).</string> <string lang="en" key="CONFIRM_VOL_HEADER_RESTORE">Are you sure you want to restore volume header of %hs?\n\nWARNING: Restoring a volume header also restores the volume password that was valid when the backup was created. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) will be necessary to mount the volume again after the volume header is restored.\n\nAfter you click Yes, you will select the header backup file.</string> <string lang="en" key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</string> <string lang="en" key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</string> @@ -876,20 +876,20 @@ <string lang="en" key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</string> <string lang="en" key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</string> <string lang="en" key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</string> - <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</string> - <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual TrueCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new TrueCrypt Rescue Disk ISO image and the location where you wish to place it.</string> + <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by RealCrypt 6.0 or later contain embedded backup headers).</string> + <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual RealCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new RealCrypt Rescue Disk ISO image and the location where you wish to place it.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your TrueCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The TrueCrypt Rescue Disk has been successfully verified.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating TrueCrypt Rescue Disk.</string> - <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">TrueCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a TrueCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your RealCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The RealCrypt Rescue Disk has been successfully verified.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a RealCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating RealCrypt Rescue Disk.</string> + <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">RealCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a RealCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a RealCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> <string lang="en" key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</string> - <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">TrueCrypt - System Favorite Volumes</string> + <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">RealCrypt - System Favorite Volumes</string> <string lang="en" key="SYS_FAVORITES_HELP_LINK">What are system favorite volumes?</string> <string lang="en" key="SYS_FAVORITES_REQUIRE_PBA">The system partition/drive does not appear to be encrypted.\n\nSystem favorite volumes can be mounted using only a pre-boot authentication password. Therefore, to enable use of system favorite volumes, you need to encrypt the system partition/drive first.</string> <string lang="en" key="DISMOUNT_FIRST">Please dismount the volume before proceeding.</string> @@ -916,14 +916,14 @@ <string lang="en" key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (e.g., to '.tc').\n\nAre you sure you want to use the problematic file extension?</string> <string lang="en" key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or some other file extension that is similarly problematic. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (e.g., to '.tc') after you dismount the volume.</string> <string lang="en" key="HOMEPAGE">Homepage</string> - <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.</string> - <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> - <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of TrueCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted TrueCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted TrueCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted TrueCrypt volume larger than 2048 GB under Windows XP.</string> + <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.</string> + <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> + <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of RealCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted RealCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted RealCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted RealCrypt volume larger than 2048 GB under Windows XP.</string> <string lang="en" key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">WARNING: If you want to be able to add more data/files to the outer volume in future, you should consider choosing a smaller size for the hidden volume.\n\nAre you sure you want to continue with the size you specified?</string> - <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a TrueCrypt volume.</string> - <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular TrueCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> + <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a RealCrypt volume.</string> + <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular RealCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> <string lang="en" key="CONFIRM_SAVE_DEFAULT_KEYFILES">WARNING: If default keyfiles are set and enabled, volumes that are not using these keyfiles will be impossible to mount. Therefore, after you enable default keyfiles, keep in mind to uncheck the 'Use keyfiles' checkbox (below a password input field) whenever mounting such volumes.\n\nAre you sure you want to save the selected keyfiles/paths as default?</string> <string lang="en" key="HK_AUTOMOUNT_DEVICES">Auto-Mount Devices</string> <string lang="en" key="HK_DISMOUNT_ALL">Dismount All</string> @@ -932,38 +932,38 @@ <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE">Force Dismount All & Wipe Cache</string> <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE_AND_EXIT">Force Dismount All, Wipe Cache & Exit</string> <string lang="en" key="HK_MOUNT_FAVORITE_VOLUMES">Mount Favorite Volumes</string> - <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main TrueCrypt Window</string> + <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main RealCrypt Window</string> <string lang="en" key="PRESS_A_KEY_TO_ASSIGN">(Click here and press a key)</string> <string lang="en" key="ACTION">Action</string> <string lang="en" key="SHORTCUT">Shortcut</string> <string lang="en" key="CANNOT_USE_RESERVED_KEY">Error: This shortcut is reserved. Please choose a different shortcut.</string> <string lang="en" key="SHORTCUT_ALREADY_IN_USE">Error: Shortcut already in use.</string> - <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more TrueCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as TrueCrypt.</string> - <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system TrueCrypt volumes (including system favorite volumes). TrueCrypt supports creation of paging files only on an encrypted system partition/drive.</string> - <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents TrueCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. TrueCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> - <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nTrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> - <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">TrueCrypt volume mounted as %c: has been dismounted.</string> - <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">TrueCrypt volumes have been dismounted.</string> - <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">TrueCrypt volumes have been dismounted and password cache has been wiped.</string> + <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more RealCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as RealCrypt.</string> + <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system RealCrypt volumes (including system favorite volumes). RealCrypt supports creation of paging files only on an encrypted system partition/drive.</string> + <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents RealCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. RealCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> + <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nRealCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> + <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">RealCrypt volume mounted as %c: has been dismounted.</string> + <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">RealCrypt volumes have been dismounted.</string> + <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">RealCrypt volumes have been dismounted and password cache has been wiped.</string> <string lang="en" key="SUCCESSFULLY_DISMOUNTED">Successfully dismounted</string> - <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the TrueCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the TrueCrypt Background Task?</string> + <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the RealCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the RealCrypt Background Task?</string> <string lang="en" key="CONFIRM_NO_FORCED_AUTODISMOUNT">WARNING: If this option is disabled, volumes containing open files/directories will not be possible to auto-dismount.\n\nAre you sure you want to disable this option?</string> <string lang="en" key="WARN_PREF_AUTO_DISMOUNT">WARNING: Volumes containing open files/directories will NOT be auto-dismounted.\n\nTo prevent this, enable the following option in this dialog window: 'Force auto-dismount even if volume contains open files or directories'</string> - <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, TrueCrypt may fail to auto-dismount volumes in such cases.</string> + <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, RealCrypt may fail to auto-dismount volumes in such cases.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PROMPT">You have scheduled the process of encryption of a partition/volume. The process has not been completed yet.\n\nDo you want to resume the process now?</string> <string lang="en" key="SYSTEM_ENCRYPTION_RESUME_PROMPT">You have scheduled the process of encryption or decryption of the system partition/drive. The process has not been completed yet.\n\nDo you want to start (resume) the process now?</string> <string lang="en" key="ASK_NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL">Do you want to be prompted about whether you want to resume the currently scheduled processes of encryption of non-system partitions/volumes?</string> <string lang="en" key="KEEP_PROMPTING_ME">Yes, keep prompting me</string> <string lang="en" key="DO_NOT_PROMPT_ME">No, do not prompt me</string> - <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="CONFIRM_EXIT">WARNING: If TrueCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish TrueCrypt to run in the background, disable the TrueCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of TrueCrypt in the Preferences).\n\nAre you sure you want TrueCrypt to exit?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="CONFIRM_EXIT">WARNING: If RealCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish RealCrypt to run in the background, disable the RealCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of RealCrypt in the Preferences).\n\nAre you sure you want RealCrypt to exit?</string> <string lang="en" key="CONFIRM_EXIT_UNIVERSAL">Exit?</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> - <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> + <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> <string lang="en" key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">Error: Failed to interrupt the process of encryption/decryption of the system partition/drive.</string> <string lang="en" key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</string> <string lang="en" key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</string> @@ -971,71 +971,71 @@ <string lang="en" key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="NOTHING_TO_RESUME">There is no process/task to resume.</string> - <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: TrueCrypt Background Task is disabled. After you exit TrueCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nEnable TrueCrypt Background Task?</string> + <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: RealCrypt Background Task is disabled. After you exit RealCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nEnable RealCrypt Background Task?</string> <string lang="en" key="LANG_PACK_VERSION">Language pack version: %s</string> - <string lang="en" key="CHECKING_FS">Checking the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since TrueCrypt 4.1.\n\nWe strongly recommend that you move data from this TrueCrypt volume to a new volume created by this version of TrueCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with TrueCrypt 4.1 or later.</string> - <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of TrueCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new TrueCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> - <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted TrueCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> + <string lang="en" key="CHECKING_FS">Checking the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since RealCrypt 4.1.\n\nWe strongly recommend that you move data from this RealCrypt volume to a new volume created by this version of RealCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with RealCrypt 4.1 or later.</string> + <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of RealCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new RealCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> + <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted RealCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> <string lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</string> - <string lang="en" key="MOUNT_TC_VOLUME">Mount TrueCrypt volume</string> - <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all TrueCrypt volumes</string> - <string lang="en" key="UAC_INIT_ERROR">TrueCrypt failed to obtain Administrator privileges.</string> + <string lang="en" key="MOUNT_TC_VOLUME">Mount RealCrypt volume</string> + <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all RealCrypt volumes</string> + <string lang="en" key="UAC_INIT_ERROR">RealCrypt failed to obtain Administrator privileges.</string> <string lang="en" key="ERR_ACCESS_DENIED">Access was denied by the operating system.\n\nPossible cause: The operating system requires that you have read/write permission (or administrator privileges) for certain folders, files, and devices, in order for you to be allowed to read and write data to/from them. Normally, a user without administrator privileges is allowed to create, read and modify files in his or her Documents folder.</string> <string lang="en" key="SECTOR_SIZE_UNSUPPORTED">Error: The drive uses an unsupported sector size.\n\nIt is currently not possible to create partition/device-hosted volumes on drives that use sectors larger than 4096 bytes. However, note that you can create file-hosted volumes (containers) on such drives.</string> <string lang="en" key="SYSENC_UNSUPPORTED_SECTOR_SIZE_BIOS">It is currently not possible to encrypt a system installed on a disk that uses a sector size other than 512 bytes.</string> - <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The TrueCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the TrueCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in TrueCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> + <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The RealCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the RealCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in RealCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> <string lang="en" key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">The feature is not supported on the version of the operating system you are currently using.</string> - <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">TrueCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> + <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">RealCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_VISTA_SP0">Before you can encrypt the system partition/drive on Windows Vista, you need to install Service Pack 1 or higher for Windows Vista (no such Service Pack has been installed on this system yet).\n\nNote: Service Pack 1 for Windows Vista resolved an issue causing a shortage of free base memory during system boot.</string> - <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">TrueCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading TrueCrypt, please install Service Pack 1 or higher for Windows Vista.</string> - <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires TrueCrypt to be installed on the system (you are running TrueCrypt in portable mode).\n\nPlease install TrueCrypt and then try again.</string> + <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">RealCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading RealCrypt, please install Service Pack 1 or higher for Windows Vista.</string> + <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires RealCrypt to be installed on the system (you are running RealCrypt in portable mode).\n\nPlease install RealCrypt and then try again.</string> <string lang="en" key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</string> <string lang="en" key="GPT_BOOT_DRIVE_UNSUPPORTED">Your system drive has a GUID partition table (GPT). Currently, only drives with a MBR partition table are supported.</string> - <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The TrueCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> - <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your TrueCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the TrueCrypt Boot Loader with the Windows system loader.</string> + <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The RealCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> + <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your RealCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the RealCrypt Boot Loader with the Windows system loader.</string> <string lang="en" key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</string> <string lang="en" key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</string> - <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the TrueCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use TrueCrypt. The above options allow you to do that by customizing the TrueCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the TrueCrypt boot loader.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the TrueCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> + <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the RealCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use RealCrypt. The above options allow you to do that by customizing the RealCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the RealCrypt boot loader.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the RealCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> <string lang="en" key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">Your system partition/drive appears to be fully encrypted.</string> - <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">TrueCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).</string> - <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> + <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">RealCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).</string> + <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> <string lang="en" key="SYSDRIVE_NON_STANDARD_PARTITIONS">Your system drive contains a non-standard partition.\n\nIf you are using a notebook, your system drive probably contains a special recovery partition. After the whole system drive is encrypted (including any recovery partition), your system might become unbootable if your computer is using an inappropriately designed BIOS. It would also be impossible to use any recovery partition until the system drive is decrypted. Therefore, we recommend that you encrypt only the system partition.</string> - <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> + <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> <string lang="en" key="WHOLE_SYC_DEVICE_RECOM">As your system drive contains only a single partition that occupies the whole drive, it is preferable (more secure) to encrypt the entire drive including the free "slack" space that typically surrounds such a partition.\n\nDo you want to encrypt the entire system drive?</string> <string lang="en" key="TEMP_NOT_ON_SYS_PARTITION">Your system is configured to store temporary files on a non-system partition.\n\nTemporary files may be stored only on the system partition.</string> <string lang="en" key="USER_PROFILE_NOT_ON_SYS_PARTITION">Your user profile files are not stored on the system partition.\n\nUser profile files may be stored only on the system partition.</string> <string lang="en" key="PAGING_FILE_NOT_ON_SYS_PARTITION">There is/are paging file(s) on non-system partitions.\n\nPaging files may be located only on the system partition.</string> - <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start TrueCrypt and try creating the hidden OS again.</string> - <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by TrueCrypt during the process of creation of the hidden operating system.</string> + <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start RealCrypt and try creating the hidden OS again.</string> + <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by RealCrypt during the process of creation of the hidden operating system.</string> <string lang="en" key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</string> - <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> - <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. TrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> + <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> + <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. RealCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> <string lang="en" key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents i t prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</string> <string lang="en" key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</string> <string lang="en" key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</string> <string lang="en" key="KEYFILES_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">Keyfiles are currently not supported for system encryption.</string> - <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: TrueCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> - <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for TrueCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> - <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As TrueCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> - <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">TrueCrypt prevented change of keyboard layout.</string> - <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. TrueCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> - <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a TrueCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the TrueCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe TrueCrypt Rescue Disk ISO image will be created in the location specified below.</string> - <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the TrueCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the TrueCrypt Volume Creation Wizard and follow its instructions.</string> + <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: RealCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> + <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for RealCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> + <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As RealCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> + <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">RealCrypt prevented change of keyboard layout.</string> + <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. RealCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> + <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a RealCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the RealCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe RealCrypt Rescue Disk ISO image will be created in the location specified below.</string> + <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the RealCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the RealCrypt Volume Creation Wizard and follow its instructions.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn it to a CD or DVD.\n\n%lsAfter you burn the Rescue Disk, click Next to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you should either burn the image to a CD/DVD or move it to a safe location for later use.\n\n%lsClick Next to continue.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</string> <string lang="en" key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</string> - <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a TrueCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new TrueCrypt Rescue Disk for it even if you use the same password.</string> + <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a RealCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new RealCrypt Rescue Disk for it even if you use the same password.</string> <string lang="en" key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">Error: Cannot save system encryption settings.</string> <string lang="en" key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">Cannot initiate the system encryption pretest.</string> <string lang="en" key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</string> <string lang="en" key="WIPE_MODE_TITLE">Wipe Mode</string> - <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when TrueCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> + <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when RealCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> <string lang="en" key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</string> <string lang="en" key="DEVICE_WIPE_PAGE_TITLE">Wiping</string> <string lang="en" key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</string> @@ -1051,131 +1051,131 @@ <string lang="en" key="WIPE_MODE_35_GUTMANN">35-pass ("Gutmann")</string> <string lang="en" key="SYS_MULTI_BOOT_MODE_TITLE">Number of Operating Systems</string> <string lang="en" key="MULTI_BOOT_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to encrypt Windows in multi-boot configurations.\n\nContinue?</string> - <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, TrueCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> - <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">TrueCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> + <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, RealCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> + <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">RealCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_TITLE">Boot Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">Is the currently running operating system installed on the boot drive?\n\nNote: Sometimes, Windows is not installed on the same drive as the Windows boot loader (boot partition). If that is the case, select 'No'.</string> - <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">TrueCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> + <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">RealCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_TITLE">Number of System Drives</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">How many drives contain an operating system?\n\nNote: For example, if you have any operating system (e.g. Windows, Mac OS X, Linux, etc.) installed on your primary drive and any additional operating system installed on your secondary drive, select '2 or more'.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">TrueCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">RealCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">Multiple Systems on Single Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">Are there any other operating systems installed on the drive on which the currently running operating system is installed?\n\nNote: For example, if the currently running operating system is installed on the drive #0, which contains several partitions, and if one of the partitions contains Windows and another partition contains any additional operating system (e.g. Windows, Mac OS X, Linux, etc.), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_TITLE">Non-Windows Boot Loader</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_OUTCOME_TITLE">Multi-Boot</string> - <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">TrueCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the TrueCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the TrueCrypt Boot Loader screen) and thus you will be able boot Linux.</string> - <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the TrueCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> + <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">RealCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the RealCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the RealCrypt Boot Loader screen) and thus you will be able boot Linux.</string> + <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the RealCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</string> - <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want TrueCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> + <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want RealCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> <string lang="en" key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</string> <string lang="en" key="SYSENC_NORMAL_TYPE_HELP">Select this option if you merely want to encrypt the system partition or the entire system drive.</string> <string lang="en" key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password to the hidden operating system. For a detailed explanation, please click the link below.</string> <string lang="en" key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</string> <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_TITLE">Hidden Operating System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two TrueCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). TrueCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two RealCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). RealCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> <string lang="en" key="SYSENC_DRIVE_ANALYSIS_TITLE">Detecting Hidden Sectors</string> - <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while TrueCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start TrueCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while RealCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start RealCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SYS_ENCRYPTION_SPAN_TITLE">Area to Encrypt</string> - <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the TrueCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> + <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the RealCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> <string lang="en" key="COLLECTING_RANDOM_DATA_TITLE">Collecting Random Data</string> <string lang="en" key="KEYS_GEN_TITLE">Keys Generated</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT">TrueCrypt has found no CD/DVD burner connected to your computer. TrueCrypt needs a CD/DVD burner to burn a bootable TrueCrypt Rescue Disk containing a backup of the encryption keys, TrueCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the TrueCrypt Rescue Disk.</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT">RealCrypt has found no CD/DVD burner connected to your computer. RealCrypt needs a CD/DVD burner to burn a bootable RealCrypt Rescue Disk containing a backup of the encryption keys, RealCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the RealCrypt Rescue Disk.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO">I have no CD/DVD burner but I will store the Rescue Disk ISO image on a removable drive (e.g. USB flash drive).</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_CONNECT_LATER">I will connect a CD/DVD burner to my computer later. Terminate the process now.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_CONNECTED_NOW">A CD/DVD burner is connected to my computer now. Continue and write the Rescue Disk.</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the TrueCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the TrueCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the TrueCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable TrueCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the TrueCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the RealCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the RealCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the RealCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable RealCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the RealCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> <string lang="en" key="RESCUE_DISK_RECORDING_TITLE">Rescue Disk Recording</string> <string lang="en" key="RESCUE_DISK_CREATED_TITLE">Rescue Disk Created</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_TITLE">System Encryption Pretest</string> <string lang="en" key="RESCUE_DISK_DISK_VERIFIED_TITLE">Rescue Disk Verified</string> - <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe TrueCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> - <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the TrueCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> - <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by TrueCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The TrueCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, TrueCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the TrueCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the TrueCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> + <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe RealCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> + <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the RealCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> + <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by RealCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The RealCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, RealCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the RealCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the RealCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_1">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if Windows cannot start after you restart the computer.\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but TrueCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the TrueCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and TrueCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the TrueCrypt Boot Loader screen does not appear (before Windows starts), insert the TrueCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the TrueCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. In the TrueCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but RealCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the RealCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and RealCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the RealCrypt Boot Loader screen does not appear (before Windows starts), insert the RealCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the RealCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. In the RealCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_TITLE">Pretest Completed</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run TrueCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> - <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, TrueCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run RealCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> + <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, RealCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> <string lang="en" key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</string> <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO_TITLE">Original System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the TrueCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, TrueCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> - <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using TrueCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the TrueCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the TrueCrypt Boot Loader will be removed).</string> - <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the RealCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, RealCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> + <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using RealCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the RealCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the RealCrypt Boot Loader will be removed).</string> + <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use TrueCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot TrueCrypt Rescue Disk\n\nTo boot a TrueCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. Note: In the TrueCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use TrueCrypt Rescue Disk (After Encrypting)\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the TrueCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the TrueCrypt Boot Loader may be damaged. The TrueCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore TrueCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but TrueCrypt says that the password is incorrect, the master key or other critical data may be damaged. The TrueCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the TrueCrypt Boot Loader is damaged, you can avoid running it by booting directly from the TrueCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run TrueCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use RealCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot RealCrypt Rescue Disk\n\nTo boot a RealCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. Note: In the RealCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use RealCrypt Rescue Disk (After Encrypting)\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the RealCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the RealCrypt Boot Loader may be damaged. The RealCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore RealCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but RealCrypt says that the password is incorrect, the master key or other critical data may be damaged. The RealCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the RealCrypt Boot Loader is damaged, you can avoid running it by booting directly from the RealCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the RealCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run RealCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular RealCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_3">1) For security reasons, shut down your computer and leave it powered off for at least several minutes (the longer, the better). This is required to clear the memory, which contains sensitive data. Then turn on the computer but do not boot the hidden system.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the TrueCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because TrueCrypt will then automatically install the TrueCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install TrueCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run TrueCrypt and select 'System' > 'Encrypt System Partition/Drive'. The TrueCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the TrueCrypt Volume Creation Wizard.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the TrueCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the RealCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because RealCrypt will then automatically install the RealCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install RealCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run RealCrypt and select 'System' > 'Encrypt System Partition/Drive'. The RealCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the RealCrypt Volume Creation Wizard.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the RealCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_8">6) Select the option 'Encrypt the Windows system partition' and then click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_9">7) If there are only the hidden system and the decoy system installed on the computer, select the option 'Single-boot' (if there are more than these two systems installed on the computer, select 'Multi-boot'). Then click 'Next'.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_11">9) In this step, choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. of the pre-boot authentication password for the hidden operating system) will remain secret.\n\nImportant: The password you choose for the decoy system must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_12">10) Follow the remaining instructions in the wizard so as to encrypt the decoy operating system.\n\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_13">After Decoy System Is Created\n------------------------------------------------\n\nAfter you encrypt the decoy system, the whole process of creation of the hidden operating system will be completed and you will be able to use these three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the TrueCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the TrueCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the RealCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the RealCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_15">The third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by TrueCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the TrueCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by RealCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the RealCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_TITLE">Operating System Cloning</string> - <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, TrueCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> + <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, RealCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> <string lang="en" key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</string> <string lang="en" key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</string> - <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The TrueCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the TrueCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.truecrypt.org/docs/?s=troubleshooting</string> + <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The RealCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the RealCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.realcrypt.org/docs/?s=troubleshooting</string> <string lang="en" key="SYS_DRIVE_NOT_ENCRYPTED">The system partition/drive does not appear to be encrypted (neither partially nor fully).</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade TrueCrypt (but you can upgrade it or reinstall the same version).</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade RealCrypt (but you can upgrade it or reinstall the same version).</string> <string lang="en" key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">Your system partition/drive is currently being encrypted, decrypted, or otherwise modified. Please interrupt the encryption/decryption/modification process (or wait until it is complete) before proceeding.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the TrueCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the RealCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="SYSTEM_ENCRYPTION_NOT_COMPLETED">The process of encryption or decryption of the system partition/drive has not been completed. Please wait until it is complete before proceeding.</string> <string lang="en" key="ERR_ENCRYPTION_NOT_COMPLETED">Error: The process of encryption of the partition/drive has not been completed. It must be completed first.</string> - <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, TrueCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main TrueCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> - <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">TrueCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> + <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, RealCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main RealCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> + <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">RealCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> <string lang="en" key="ERR_PARAMETER_INCORRECT">Error: Incorrect/invalid parameter.</string> <string lang="en" key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">You have selected a partition or a device but the wizard mode you selected is suitable only for file containers.\n\nDo you want to change the wizard mode?</string> - <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a TrueCrypt file container instead?</string> + <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a RealCrypt file container instead?</string> <string lang="en" key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</string> - <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The TrueCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the TrueCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the TrueCrypt Rescue Disk to boot or to repair the TrueCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> + <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The RealCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the RealCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the RealCrypt Rescue Disk to boot or to repair the RealCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> <string lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</string> - <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update TrueCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the TrueCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded TrueCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a TrueCrypt driver and TrueCrypt applications whose version numbers are different from the version number of the TrueCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> - <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system.\n\nYou should run the TrueCrypt installer (whose version number is the same as the one of the TrueCrypt Boot Loader) to update TrueCrypt on this operating system.</string> - <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the TrueCrypt Rescue Disk, you should reinstall TrueCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the TrueCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the TrueCrypt Boot Loader.</string> - <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">TrueCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in TrueCrypt.</string> - <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that TrueCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, TrueCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update RealCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the RealCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded RealCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a RealCrypt driver and RealCrypt applications whose version numbers are different from the version number of the RealCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> + <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system.\n\nYou should run the RealCrypt installer (whose version number is the same as the one of the RealCrypt Boot Loader) to update RealCrypt on this operating system.</string> + <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the RealCrypt Rescue Disk, you should reinstall RealCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the RealCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the RealCrypt Boot Loader.</string> + <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">RealCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in RealCrypt.</string> + <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that RealCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, RealCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SKIP_HIDDEN_SECTOR_DETECTION">Skip detection of hidden sectors (use the size reported by the operating system)</string> <string lang="en" key="RETRY_HIDDEN_SECTOR_DETECTION">Try to detect hidden sectors again</string> - <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. TrueCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want TrueCrypt to write zeroes to unreadable sectors?</string> - <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, TrueCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want TrueCrypt to discard data in the unreadable sectors now?</string> - <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: TrueCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> + <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. RealCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want RealCrypt to write zeroes to unreadable sectors?</string> + <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, RealCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want RealCrypt to discard data in the unreadable sectors now?</string> + <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: RealCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> <string lang="en" key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</string> - <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow TrueCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let TrueCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> + <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow RealCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let RealCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> <string lang="en" key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</string> - <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow TrueCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> + <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow RealCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</string> <string lang="en" key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</string> @@ -1185,37 +1185,37 @@ <string lang="en" key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</string> <string lang="en" key="SECURITY_TOKEN_ERROR">Security token error</string> <string lang="en" key="CKR_PIN_INCORRECT">Password for security token is incorrect.</string> - <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by TrueCrypt (select 'Tools' > 'Keyfile Generator').</string> + <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by RealCrypt (select 'Tools' > 'Keyfile Generator').</string> <string lang="en" key="ALL_TOKEN_SESSIONS_CLOSED">All open security token sessions have been closed.</string> <string lang="en" key="SELECT_TOKEN_KEYFILES">Select Security Token Keyfiles</string> <string lang="en" key="TOKEN_SLOT_ID">Slot</string> <string lang="en" key="TOKEN_NAME">Token name</string> <string lang="en" key="TOKEN_DATA_OBJECT_LABEL">File name</string> - <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in TrueCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In TrueCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> + <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in RealCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In RealCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> <string lang="en" key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal TrueCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in TrueCrypt'. In addition, when TrueCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main TrueCrypt application window.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and TrueCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the TrueCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the TrueCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal RealCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in RealCrypt'. In addition, when RealCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main RealCrypt application window.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and RealCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the RealCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the RealCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> <string lang="en" key="SETTING_REQUIRES_REBOOT">Note that this setting takes effect only after the operating system is restarted.</string> <string lang="en" key="COMMAND_LINE_ERROR">Error while parsing command line.</string> <string lang="en" key="RESCUE_DISK">Rescue Disk</string> <string lang="en" key="SELECT_FILE_AND_MOUNT">Select &File and Mount...</string> <string lang="en" key="SELECT_DEVICE_AND_MOUNT">Select &Device and Mount...</string> - <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in TrueCrypt</string> + <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in RealCrypt</string> <string lang="en" key="MOUNT_SYSTEM_FAVORITES_ON_BOOT">Mount system favorite volumes when Windows starts (in the initial phase of the startup procedure)</string> - <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted TrueCrypt volume resides, you should always dismount the TrueCrypt volume in TrueCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> - <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in TrueCrypt and select 'Repair Filesystem').</string> - <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the TrueCrypt volume to another, healthy, TrueCrypt volume.\n\nDo you want to repair the filesystem now?</string> - <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in TrueCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> + <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted RealCrypt volume resides, you should always dismount the RealCrypt volume in RealCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> + <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in RealCrypt and select 'Repair Filesystem').</string> + <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the RealCrypt volume to another, healthy, RealCrypt volume.\n\nDo you want to repair the filesystem now?</string> + <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in RealCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</string> - <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by TrueCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> + <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by RealCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> <string lang="en" key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</string> <string lang="en" key="NUMBER_OF_THREADS">%d threads</string> <string lang="en" key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</string> <string lang="en" key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</string> - <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want TrueCrypt to attempt to disable write protection of the partition/drive?</string> + <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want RealCrypt to attempt to disable write protection of the partition/drive?</string> <string lang="en" key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: TrueCrypt volume auto-dismounted</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in TrueCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: RealCrypt volume auto-dismounted</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in RealCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> <string lang="en" key="TEST">Test</string> <string lang="en" key="KEYFILE">Keyfile</string> <string lang="en" key="VKEY_08">Backspace</string> @@ -1287,7 +1287,7 @@ </localization>  <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> - <xs:element name="TrueCrypt"> + <xs:element name="RealCrypt"> <xs:complexType> <xs:sequence> <xs:element name="localization"> @@ -1338,4 +1338,4 @@ </xs:complexType> </xs:element> </xs:schema> -</TrueCrypt> +</RealCrypt> diff -Naur truecrypt-7.0a-source.orig//Common/Tcdefs.h truecrypt-7.0a-source/Common/Tcdefs.h --- truecrypt-7.0a-source.orig//Common/Tcdefs.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Common/Tcdefs.h 2010-11-23 16:19:04.000000000 +0100 @@ -12,7 +12,7 @@ #ifndef TCDEFS_H #define TCDEFS_H -#define TC_APP_NAME "TrueCrypt" +#define TC_APP_NAME "RealCrypt" // Version displayed to user #define VERSION_STRING "7.1a" @@ -247,13 +247,13 @@ #define TC_MAX_PATH 260 /* Includes the null terminator */ #endif -#define TC_STR_RELEASED_BY "Released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE +#define TC_STR_RELEASED_BY "Originally released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE #define MAX_URL_LENGTH 2084 /* Internet Explorer limit. Includes the terminating null character. */ -#define TC_HOMEPAGE "http://www.truecrypt.org/" -#define TC_APPLINK "http://www.truecrypt.org/applink?version=" VERSION_STRING -#define TC_APPLINK_SECURE "https://www.truecrypt.org/applink?version=" VERSION_STRING +#define TC_HOMEPAGE "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK_SECURE "http://rpmfusion.org/Package/realcrypt/" enum { diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp truecrypt-7.0a-source/Core/Unix/CoreService.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreService.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -357,7 +357,7 @@ string appPath = request.ApplicationExecutablePath; if (appPath.empty()) - appPath = "truecrypt"; + appPath = "realcrypt"; const char *args[] = { "sudo", "-S", "-p", "", appPath.c_str(), TC_CORE_SERVICE_CMDLINE_OPTION, nullptr }; execvp (args[0], ((char* const*) args)); diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -205,17 +205,17 @@ string CoreUnix::GetDefaultMountPointPrefix () const { - const char *envPrefix = getenv ("TRUECRYPT_MOUNT_PREFIX"); + const char *envPrefix = getenv ("REALCRYPT_MOUNT_PREFIX"); if (envPrefix && !string (envPrefix).empty()) return envPrefix; if (FilesystemPath ("/media").IsDirectory()) - return "/media/truecrypt"; + return "/media/realcrypt"; if (FilesystemPath ("/mnt").IsDirectory()) - return "/mnt/truecrypt"; + return "/mnt/realcrypt"; - return GetTempDirectory() + "/truecrypt_mnt"; + return GetTempDirectory() + "/realcrypt_mnt"; } uint32 CoreUnix::GetDeviceSectorSize (const DevicePath &devicePath) const diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h truecrypt-7.0a-source/Core/Unix/CoreUnix.h --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.h 2010-11-23 16:19:04.000000000 +0100 @@ -51,7 +51,7 @@ virtual void DismountNativeVolume (shared_ptr <VolumeInfo> mountedVolume) const { throw NotApplicable (SRC_POS); } virtual bool FilesystemSupportsUnixPermissions (const DevicePath &devicePath) const; virtual string GetDefaultMountPointPrefix () const; - virtual string GetFuseMountDirPrefix () const { return ".truecrypt_aux_mnt"; } + virtual string GetFuseMountDirPrefix () const { return ".realcrypt_aux_mnt"; } virtual MountedFilesystemList GetMountedFilesystems (const DevicePath &devicePath = DevicePath(), const DirectoryPath &mountPoint = DirectoryPath()) const = 0; virtual uid_t GetRealUserId () const; virtual gid_t GetRealGroupId () const; diff -Naur truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp --- truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -113,7 +113,7 @@ { string devPath = mountedVolume->VirtualDevice; - if (devPath.find ("/dev/mapper/truecrypt") != 0) + if (devPath.find ("/dev/mapper/realcrypt") != 0) throw NotApplicable (SRC_POS); size_t devCount = 0; @@ -368,7 +368,7 @@ } stringstream nativeDevName; - nativeDevName << "truecrypt" << options.SlotNumber; + nativeDevName << "realcrypt" << options.SlotNumber; if (nativeDevCount != cipherCount - 1) nativeDevName << "_" << cipherCount - nativeDevCount - 2; diff -Naur truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h truecrypt-7.0a-source/Driver/Fuse/FuseService.h --- truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Driver/Fuse/FuseService.h 2010-11-23 16:19:04.000000000 +0100 @@ -43,7 +43,7 @@ static int ExceptionToErrorCode (); static const char *GetControlPath () { return "/control"; } static const char *GetVolumeImagePath (); - static string GetDeviceType () { return "truecrypt"; } + static string GetDeviceType () { return "realcrypt"; } static uid_t GetGroupId () { return GroupId; } static uid_t GetUserId () { return UserId; } static shared_ptr <Buffer> GetVolumeInfo (); diff -Naur truecrypt-7.0a-source.orig//Main/Application.h truecrypt-7.0a-source/Main/Application.h --- truecrypt-7.0a-source.orig//Main/Application.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Application.h 2010-11-23 16:19:04.000000000 +0100 @@ -24,7 +24,7 @@ static DirectoryPath GetExecutableDirectory (); static FilePath GetExecutablePath (); static int GetExitCode () { return ExitCode; } - static wstring GetName () { return L"TrueCrypt"; } + static wstring GetName () { return L"RealCrypt"; } static UserInterface *GetUserInterface () { return mUserInterface; } static UserInterfaceType::Enum GetUserInterfaceType () { return mUserInterfaceType; } static void Initialize (UserInterfaceType::Enum type); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ namespace TrueCrypt VersionStaticText->SetLabel (Application::GetName() + L" " + StringConverter::ToWide (Version::String())); CopyrightStaticText->SetLabel (StringConverter::ToWide (TC_STR_RELEASED_BY)); - WebsiteHyperlink->SetLabel (L"www.truecrypt.org"); + WebsiteHyperlink->SetLabel (L"RealCrypt is a RPM Fusion rebrand of TrueCrypt, freely available at www.truecrypt.org"); CreditsTextCtrl->SetMinSize (wxSize ( Gui->GetCharWidth (CreditsTextCtrl) * 70, @@ -61,6 +61,6 @@ namespace TrueCrypt L"This software uses wxWidgets library, which is copyright \xA9 1998-2011 Julian Smart, Robert Roebling et al.\n\n" - L"A TrueCrypt Foundation Release"); + L"A RPMfusion Release"); } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -152,7 +152,7 @@ else if (SelectedVolumeType == VolumeType::Hidden) { pageTitle = LangString["SIZE_HIDVOL_TITLE"]; - pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in TrueCrypt but a limitation of the operating system."); + pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in RealCrypt but a limitation of the operating system."); freeSpaceText = StringFormatter (_("Maximum possible hidden volume size for this volume is {0}."), Gui->SizeToString (MaxHiddenVolumeSize)); } else diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -69,7 +69,7 @@ AppendToList ("BACKUP_HEADER", LangString[volumeInfo.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"]); #ifdef TC_LINUX - if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif AppendToList ("TOTAL_DATA_READ", Gui->SizeToString (volumeInfo.TotalDataRead)); diff -Naur truecrypt-7.0a-source.orig//Main/GraphicUserInterface.cpp truecrypt-7.0a-source/Main/GraphicUserInterface.cpp --- truecrypt-7.1a-source.orig//Main/GraphicUserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.1a-source/Main/GraphicUserInterface.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -860,7 +860,7 @@ wxLog::FlushActive(); Application::SetExitCode (1); - Gui->ShowInfo (_("TrueCrypt is already running.")); + Gui->ShowInfo (_("RealCrypt is already running.")); return false; } @@ -983,48 +983,9 @@ wxString GraphicUserInterface::GetHomepageLinkURL (const wxString &linkId, bool secure, const wxString &extraVars) const { - wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)) + L"&dest=" + linkId; + wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)); wxString os, osVersion, architecture; -#ifdef TC_WINDOWS - - os = L"Windows"; - -#elif defined (TC_UNIX) - struct utsname unameData; - if (uname (&unameData) != -1) - { - os = StringConverter::ToWide (unameData.sysname); - osVersion = StringConverter::ToWide (unameData.release); - architecture = StringConverter::ToWide (unameData.machine); - - if (os == L"Darwin") - os = L"MacOSX"; - } - else - os = L"Unknown"; -#else - os = L"Unknown"; -#endif - - os.Replace (L" ", L"-"); - url += L"&os="; - url += os; - - osVersion.Replace (L" ", L"-"); - url += L"&osver="; - url += osVersion; - - architecture.Replace (L" ", L"-"); - url += L"&arch="; - url += architecture; - - if (!extraVars.empty()) - { - url += L"&"; - url += extraVars; - } - return url; } @@ -1050,13 +1011,13 @@ wxString docPath = wstring (Application::GetExecutableDirectory()); #ifdef TC_RESOURCE_DIR - docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/TrueCrypt User Guide.pdf"); + docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/RealCrypt User Guide.pdf"); #elif defined (TC_WINDOWS) - docPath += L"\\TrueCrypt User Guide.pdf"; + docPath += L"\\RealCrypt User Guide.pdf"; #elif defined (TC_MACOSX) - docPath += L"/../Resources/TrueCrypt User Guide.pdf"; + docPath += L"/../Resources/RealCrypt User Guide.pdf"; #elif defined (TC_UNIX) - docPath = L"/usr/share/truecrypt/doc/TrueCrypt User Guide.pdf"; + docPath = L"/usr/share/doc/packages/realcrypt/RealCrypt User Guide.pdf"; #else # error TC_RESOURCE_DIR undefined #endif diff -Naur truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp truecrypt-7.0a-source/Main/LanguageStrings.cpp --- truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/LanguageStrings.cpp 2010-11-23 16:25:14.000000000 +0100 @@ -2,7 +2,7 @@ Copyright (c) 2008-2009 TrueCrypt Developers Association. All rights reserved. Governed by the TrueCrypt License 3.0 the full text of which is contained in - the file License.txt included in TrueCrypt binary and source code distribution + the file License.txt included in RealCrypt binary and source code distribution packages. */ @@ -55,31 +55,31 @@ Map["MOUNT_POINT"] = _("Mount Directory"); Map["NO"] = _("No"); Map["NO_VOLUMES_MOUNTED"] = _("No volumes mounted."); - Map["OPEN_NEW_VOLUME"] = _("Specify a New TrueCrypt Volume"); + Map["OPEN_NEW_VOLUME"] = _("Specify a New RealCrypt Volume"); Map["PARAMETER_INCORRECT"] = _("Parameter incorrrect"); Map["SELECT_KEYFILES"] = _("Select Keyfiles"); - Map["START_TC"] = _("Start TrueCrypt"); + Map["START_TC"] = _("Start RealCrypt"); Map["VOLUME_ALREADY_MOUNTED"] = _("The volume \"{0}\" is already mounted."); Map["UNKNOWN_OPTION"] = _("Unknown option"); Map["VOLUME_LOCATION"] = _("Volume Location"); Map["YES"] = _("Yes"); Map["VOLUME_HOST_IN_USE"] = _("WARNING: The host file/device \"{0}\" is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue mounting?"); Map["VIRTUAL_DEVICE"] = _("Virtual Device"); - Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the TrueCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit TrueCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the TrueCrypt Background Task?"); - Map["CONFIRM_EXIT"] = _("WARNING: If TrueCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish TrueCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want TrueCrypt to exit?"); - Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nTrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); + Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the RealCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit RealCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the RealCrypt Background Task?"); + Map["CONFIRM_EXIT"] = _("WARNING: If RealCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish RealCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want RealCrypt to exit?"); + Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nRealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); Map["ENTER_PASSWORD"] = _("Enter password"); Map["ENTER_PASSWORD_FOR"] = _("Enter password for \"{0}\""); - Map["ENTER_TC_VOL_PASSWORD"] = _("Enter TrueCrypt Volume Password"); + Map["ENTER_TC_VOL_PASSWORD"] = _("Enter RealCrypt Volume Password"); Map["SELECT_KEYFILE_PATH"] = _("Select Keyfile Search Path"); Map["MORE_INFO_ABOUT"] = _("More information on {0}"); Map["TWO_LAYER_CASCADE_HELP"] = _("Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key) and then with {2} ({3}-bit key). Each cipher uses its own key. All keys are mutually independent."); Map["THREE_LAYER_CASCADE_HELP"] = _("Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key), then with {2} ({3}-bit key), and finally with {4} ({5}-bit key). Each cipher uses its own key. All keys are mutually independent."); - Map["CHECKING_FS"] = _("Checking the file system on the TrueCrypt volume mounted as {0}..."); - Map["REPAIRING_FS"] = _("Attempting to repair the file system on the TrueCrypt volume mounted as {0}..."); + Map["CHECKING_FS"] = _("Checking the file system on the RealCrypt volume mounted as {0}..."); + Map["REPAIRING_FS"] = _("Attempting to repair the file system on the RealCrypt volume mounted as {0}..."); Map["UNMOUNT_LOCK_FAILED"] = _("Volume \"{0}\" contains files or folders being used by applications or system.\n\nForce dismount?"); Map["VOLUME_SIZE_HELP"] = _("Please specify the size of the container to create. Note that the minimum possible size of a volume is 292 KB."); - Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by TrueCrypt 5.0 or later."); + Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by RealCrypt 5.0 or later."); } LanguageStrings LangString; diff -Naur truecrypt-7.0a-source.orig//Main/UserInterface.cpp truecrypt-7.0a-source/Main/UserInterface.cpp --- truecrypt-7.0a-source.orig//Main/UserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/UserInterface.cpp 2010-11-23 16:22:58.000000000 +0100 @@ -48,7 +48,7 @@ if (!Preferences.NonInteractive) { if (!SystemInfo::IsVersionAtLeast (2, 6, 24)) - ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a TrueCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); + ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a RealCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); } #endif // TC_LINUX } @@ -280,7 +280,7 @@ prop << LangString["BACKUP_HEADER"] << L": " << LangString[volume.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"] << L'\n'; #ifdef TC_LINUX - if (string (volume.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volume.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif prop << LangString["TOTAL_DATA_READ"] << L": " << SizeToString (volume.TotalDataRead) << L'\n'; @@ -354,10 +354,10 @@ // Unresolved exceptions string typeName (StringConverter::GetTypeName (typeid (ex))); - size_t pos = typeName.find ("TrueCrypt::"); + size_t pos = typeName.find ("RealCrypt::"); if (pos != string::npos) { - return StringConverter::ToWide (typeName.substr (pos + string ("TrueCrypt::").size())) + return StringConverter::ToWide (typeName.substr (pos + string ("RealCrypt::").size())) + L" at " + StringConverter::ToWide (ex.what()); } @@ -466,7 +466,7 @@ EX2MSG (UnsupportedSectorSizeHiddenVolumeProtection, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.")); EX2MSG (UnsupportedSectorSizeNoKernelCrypto, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.")); #else - EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use TrueCrypt on another platform.")); + EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use RealCrypt on another platform.")); #endif EX2MSG (VolumeAlreadyMounted, LangString["VOL_ALREADY_MOUNTED"]); @@ -475,7 +475,7 @@ EX2MSG (VolumeSlotUnavailable, _("Volume slot unavailable.")); #ifdef TC_MACOSX - EX2MSG (HigherFuseVersionRequired, _("TrueCrypt requires MacFUSE 1.3 or later.")); + EX2MSG (HigherFuseVersionRequired, _("RealCrypt requires MacFUSE 1.3 or later.")); #endif #undef EX2MSG @@ -1008,8 +1008,8 @@ wstring helpText = StringConverter::ToWide ( "Synopsis:\n" "\n" - "truecrypt [OPTIONS] COMMAND\n" - "truecrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" + "realcrypt [OPTIONS] COMMAND\n" + "realcrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" "\n" "\n" "Commands:\n" @@ -1093,7 +1093,7 @@ "\n" "MOUNTED_VOLUME:\n" " Specifies a mounted volume. One of the following forms can be used:\n" - " 1) Path to the encrypted TrueCrypt volume.\n" + " 1) Path to the encrypted RealCrypt volume.\n" " 2) Mount directory of the volume's filesystem (if mounted).\n" " 3) Slot number of the mounted volume (requires --slot).\n" "\n" @@ -1119,7 +1119,7 @@ "\n" "--fs-options=OPTIONS\n" " Filesystem mount options. The OPTIONS argument is passed to mount(8)\n" - " command with option -o when a filesystem on a TrueCrypt volume is mounted.\n" + " command with option -o when a filesystem on a RealCrypt volume is mounted.\n" " This option is not available on some platforms.\n" "\n" "--hash=HASH\n" @@ -1141,7 +1141,7 @@ " Load user preferences.\n" "\n" "-m, --mount-options=OPTION1[,OPTION2,OPTION3,...]\n" - " Specifies comma-separated mount options for a TrueCrypt volume:\n" + " Specifies comma-separated mount options for a RealCrypt volume:\n" " headerbak: Use backup headers when mounting a volume.\n" " nokernelcrypto: Do not use kernel cryptographic services.\n" " readonly|ro: Mount volume as read-only.\n" @@ -1217,37 +1217,37 @@ "\n" "IMPORTANT:\n" "\n" - "If you want to use TrueCrypt, you must follow the security requirements and\n" + "If you want to use RealCrypt, you must follow the security requirements and\n" "security precautions listed in chapter 'Security Requirements and Precautions'\n" - "in the TrueCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" + "in the RealCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" "\n" "\nExamples:\n\n" "Create a new volume:\n" - "truecrypt -t -c\n" + "realcrypt -t -c\n" "\n" "Mount a volume:\n" - "truecrypt volume.tc /media/truecrypt1\n" + "realcrypt volume.tc /media/realcrypt1\n" "\n" "Mount a volume as read-only, using keyfiles:\n" - "truecrypt -m ro -k keyfile1,keyfile2 volume.tc\n" + "realcrypt -m ro -k keyfile1,keyfile2 volume.tc\n" "\n" "Mount a volume without mounting its filesystem:\n" - "truecrypt --filesystem=none volume.tc\n" + "realcrypt --filesystem=none volume.tc\n" "\n" "Mount a volume prompting only for its password:\n" - "truecrypt -t -k \"\" --protect-hidden=no volume.tc /media/truecrypt1\n" + "realcrypt -t -k \"\" --protect-hidden=no volume.tc /media/realcrypt1\n" "\n" "Dismount a volume:\n" - "truecrypt -d volume.tc\n" + "realcrypt -d volume.tc\n" "\n" "Dismount all mounted volumes:\n" - "truecrypt -d\n" + "realcrypt -d\n" ); #ifndef TC_NO_GUI if (Application::GetUserInterfaceType() == UserInterfaceType::Graphic) { - wxDialog dialog (nullptr, wxID_ANY, _("TrueCrypt Command Line Help"), wxDefaultPosition); + wxDialog dialog (nullptr, wxID_ANY, _("RealCrypt Command Line Help"), wxDefaultPosition); wxTextCtrl *textCtrl = new wxTextCtrl (&dialog, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE | wxTE_READONLY); textCtrl->SetFont (wxFont (wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, L"Courier")); diff -Naur truecrypt-7.0a-source.orig//Makefile truecrypt-7.0a-source/Makefile --- truecrypt-7.0a-source.orig//Makefile 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Makefile 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ #------ Build configuration ------ -export APPNAME := truecrypt +export APPNAME := realcrypt export BASE_DIR := $(CURDIR) export BUILD_INC := $(BASE_DIR)/Build/Include diff -Naur truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp --- truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -13,14 +13,14 @@ { void SystemLog::WriteDebug (const string &debugMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_DEBUG, "%s", debugMessage.c_str()); closelog(); } void SystemLog::WriteError (const string &errorMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_ERR, "%s", errorMessage.c_str()); closelog(); } --- truecrypt-6.3a-source.orig/Main/CommandLineInterface.cpp 2009-11-22 15:10:00.000000000 +0000 +++ truecrypt-6.3a-source/Main/CommandLineInterface.cpp 2010-02-15 18:55:13.000000000 +0000 @@ -54,7 +54,7 @@ namespace TrueCrypt parser.AddSwitch (L"", L"list-token-keyfiles", _("List security token keyfiles")); parser.AddSwitch (L"", L"load-preferences", _("Load user preferences")); parser.AddSwitch (L"", L"mount", _("Mount volume interactively")); - parser.AddOption (L"m", L"mount-options", _("TrueCrypt volume mount options")); + parser.AddOption (L"m", L"mount-options", _("RealCrypt volume mount options")); parser.AddOption (L"", L"new-keyfiles", _("New keyfiles")); parser.AddOption (L"", L"new-password", _("New password")); parser.AddSwitch (L"", L"non-interactive", _("Do not interact with user")); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.h truecrypt-7.0a-source/Main/Forms/Forms.h --- truecrypt-7.0a-source.orig//Main/Forms/Forms.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.h 2010-11-23 16:19:04.000000000 +0100 @@ -122,7 +122,7 @@ virtual void OnDefaultKeyfilesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnSecurityTokenPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } - virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } +// virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnOnlineHelpMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnBeginnersTutorialMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnFaqMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } @@ -150,7 +150,7 @@ public: - MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); + MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); ~MainFrameBase(); }; @@ -335,7 +335,7 @@ public: - EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~EncryptionTestDialogBase(); }; @@ -446,7 +446,7 @@ wxTextCtrl* LegalNoticesTextCtrl; public: - LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~LegalNoticesDialogBase(); }; @@ -497,7 +497,7 @@ public: - MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter TrueCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); + MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter RealCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); ~MountOptionsDialogBase(); }; @@ -648,7 +648,7 @@ public: - RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~RandomPoolEnrichmentDialogBase(); }; @@ -1023,6 +1023,6 @@ }; -} // namespace TrueCrypt +} // namespace RealCrypt #endif //__Forms__ diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp truecrypt-7.0a-source/Main/Forms/Forms.cpp --- truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -149,9 +149,9 @@ MainMenuBar->Append( SettingsMenu, _("Settin&gs") ); HelpMenu = new wxMenu(); - wxMenuItem* UserGuideMenuItem; +/* wxMenuItem* UserGuideMenuItem; UserGuideMenuItem = new wxMenuItem( HelpMenu, wxID_HELP, wxString( _("User's Guide") ) , wxEmptyString, wxITEM_NORMAL ); - HelpMenu->Append( UserGuideMenuItem ); + HelpMenu->Append( UserGuideMenuItem );*/ wxMenuItem* OnlineHelpMenuItem; OnlineHelpMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("Online Help") ) , wxEmptyString, wxITEM_NORMAL ); @@ -168,7 +168,7 @@ HelpMenu->AppendSeparator(); wxMenuItem* WebsiteMenuItem; - WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("TrueCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); + WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("RealCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); HelpMenu->Append( WebsiteMenuItem ); wxMenuItem* DownloadsMenuItem; @@ -423,7 +423,7 @@ this->Connect( DefaultKeyfilesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Connect( SecurityTokenPreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Connect( PreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Connect( OnlineHelpMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Connect( BeginnersTutorialMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Connect( FaqMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -487,7 +487,7 @@ this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -1683,7 +1683,7 @@ wxStaticBoxSizer* sbSizer14; sbSizer14 = new wxStaticBoxSizer( new wxStaticBox( SecurityPage, wxID_ANY, _("Password Cache") ), wxVERTICAL ); - WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after TrueCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); + WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after RealCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); sbSizer14->Add( WipeCacheOnCloseCheckBox, 0, wxALL, 5 ); @@ -1757,7 +1757,7 @@ bSizer62 = new wxBoxSizer( wxVERTICAL ); wxStaticBoxSizer* sbSizer18; - sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("TrueCrypt Background Task") ), wxVERTICAL ); + sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("RealCrypt Background Task") ), wxVERTICAL ); BackgroundTaskEnabledCheckBox = new wxCheckBox( BackgroundTaskPanel, wxID_ANY, _("Enabled"), wxDefaultPosition, wxDefaultSize, 0 ); @@ -1801,7 +1801,7 @@ LogOnSizer = new wxStaticBoxSizer( new wxStaticBox( SystemIntegrationPage, wxID_ANY, _("Actions to Perform when User Logs On") ), wxVERTICAL ); - StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start TrueCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); + StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start RealCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( StartOnLogonCheckBox, 0, wxALL, 5 ); @@ -1809,7 +1809,7 @@ LogOnSizer->Add( MountFavoritesOnLogonCheckBox, 0, wxALL, 5 ); - MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted TrueCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); + MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted RealCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( MountDevicesOnLogonCheckBox, 0, wxALL, 5 ); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp truecrypt-7.0a-source/Main/Forms/MainFrame.cpp --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -1365,7 +1365,7 @@ else if (show && !mTaskBarIcon->IsIconInstalled()) { #ifndef TC_MACOSX - mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"TrueCrypt"); + mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"RealCrypt"); #endif } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h truecrypt-7.0a-source/Main/Forms/MainFrame.h --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.h 2010-11-23 16:19:04.000000000 +0100 @@ -127,7 +127,7 @@ void OnVolumeButtonClick (wxCommandEvent& event); void OnVolumeDismounted (EventArgs &args) { UpdateVolumeList(); } void OnVolumeMounted (EventArgs &args) { UpdateVolumeList(); } - void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } +// void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } void OnWebsiteMenuItemSelected (wxCommandEvent& event) { Gui->OpenHomepageLink (this, L"website"); } void OnWipeCacheButtonClick (wxCommandEvent& event); void OrganizeFavorites (const FavoriteVolumeList &favorites, size_t newItemCount = 0); Index: realcrypt.spec =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-17/realcrypt.spec,v retrieving revision 1.19 retrieving revision 1.20 diff -u -r1.19 -r1.20 --- realcrypt.spec 7 Mar 2012 23:13:20 -0000 1.19 +++ realcrypt.spec 13 Apr 2012 15:24:49 -0000 1.20 @@ -1,9 +1,10 @@ #define _default_patch_fuzz 2 +%define _hardened_build 1 Name: realcrypt Summary: Cross platform disk encryption software -Version: 7.1 -Release: 3%{?dist} +Version: 7.1a +Release: 1%{?dist} License: TrueCrypt License Version 3.0 Group: Applications/File URL: http://www.truecrypt.org/ @@ -35,6 +36,7 @@ Source22: Textual_logo_background_real.bmp.lzma Patch1: realcrypt-rpm_opt_flags.patch Patch2: realcrypt-%{version}-rebranding.patch +Patch3: noexecstack.patch Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Requires: fuse, pam, usermode, wxGTK >= 2.8.0 @@ -68,6 +70,7 @@ cp %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE7} . %patch1 -p1 -b .realcrypt-rpm_opt_flags %patch2 -p1 -b .realcrypt-%{version}-rebranding +%patch3 -p1 -b .noexecstack # Replace graphics which include the TrueCrypt logo @@ -143,6 +146,10 @@ %changelog +* Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 +- update to 7.1a +- harden build + * Thu Mar 08 2012 Nicolas Chauvet <kwizart(a)gmail.com> - 7.1-3 - Rebuilt for c++ ABI breakage Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-17/sources,v retrieving revision 1.8 retrieving revision 1.9 diff -u -r1.8 -r1.9 --- sources 1 Oct 2011 17:41:47 -0000 1.8 +++ sources 13 Apr 2012 15:24:49 -0000 1.9 @@ -1,4 +1,4 @@ -a8268630a870faff07af940f63fb29eb trueCrypt-7.1-source.tar.gz +102d9652681db11c813610882332ae48 trueCrypt-7.1a-source.tar.gz 9bc27b99ba35d06ebce2a509959edc59 Drive_icon_96dpi_real.bmp.lzma 28a8f649fffbad0de024322d92a6d98a Drive_icon_mask_96dpi_real.bmp.lzma 5b44c191a46d727249f28ab77deb2e7c Logo_96dpi_real.bmp.lzma --- realcrypt-7.0a-rebranding.patch DELETED ---

12 years, 7 months

1
0
0 / 0

rpms/realcrypt/F-16 sources,1.9,1.10

by Leigh Scott

Author: leigh123linux Update of /cvs/nonfree/rpms/realcrypt/F-16 In directory se02.es.rpmfusion.net:/tmp/cvs-serv9005 Modified Files: sources Log Message: * Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 - update to 7.1a - harden build Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-16/sources,v retrieving revision 1.9 retrieving revision 1.10 diff -u -r1.9 -r1.10 --- sources 13 Apr 2012 14:57:39 -0000 1.9 +++ sources 13 Apr 2012 14:59:22 -0000 1.10 @@ -1 +1,13 @@ 102d9652681db11c813610882332ae48 trueCrypt-7.1a-source.tar.gz +9bc27b99ba35d06ebce2a509959edc59 Drive_icon_96dpi_real.bmp.lzma +28a8f649fffbad0de024322d92a6d98a Drive_icon_mask_96dpi_real.bmp.lzma +5b44c191a46d727249f28ab77deb2e7c Logo_96dpi_real.bmp.lzma +b4e18e24b5c2c67c6381a8b67bd924b0 Logo_288dpi_real.bmp.lzma +8230926fbb7942eae9bb6ddb8f2bbd47 realcrypt_64.png.lzma +9f8fe4f92ad178e83a8be41d6b492793 System_drive_icon_96dpi_real.bmp.lzma +950bc3602d98f5c65df6e70ecba2585c System_drive_icon_mask_96dpi_real.bmp.lzma +3baacce200982d311c66db96bad2c48c Textual_logo_96dpi_real.bmp.lzma +ddbc2c291569fe2e439a7b0f600144c4 Textual_logo_288dpi_real.bmp.lzma +7c2ad91bc612971e6f3b78077c2102a5 Textual_logo_background_real.bmp.lzma +4445bb6d55876805e9e97adcb2377cbf TrueCrypt-16x16_real.xpm.lzma +daa49085339d7b55dccebf2306b0a87e TrueCrypt_Wizard_real.bmp.lzma

12 years, 7 months

1
0
0 / 0

rpms/realcrypt/F-16 .cvsignore, 1.7, 1.8 sources, 1.8, 1.9 realcrypt-7.0a-rebranding.patch, 1.2, NONE

by Leigh Scott

Author: leigh123linux Update of /cvs/nonfree/rpms/realcrypt/F-16 In directory se02.es.rpmfusion.net:/tmp/cvs-serv8570 Modified Files: .cvsignore sources Removed Files: realcrypt-7.0a-rebranding.patch Log Message: * Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 - update to 7.1a - harden build Index: .cvsignore =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-16/.cvsignore,v retrieving revision 1.7 retrieving revision 1.8 diff -u -r1.7 -r1.8 --- .cvsignore 15 Dec 2010 14:39:06 -0000 1.7 +++ .cvsignore 13 Apr 2012 14:57:39 -0000 1.8 @@ -1,14 +1 @@ -trueCrypt-6.3a-source.tar.gz -Drive_icon_96dpi_real.bmp.lzma -Drive_icon_mask_96dpi_real.bmp.lzma -Logo_96dpi_real.bmp.lzma -Logo_288dpi_real.bmp.lzma -realcrypt_64.png.lzma -System_drive_icon_96dpi_real.bmp.lzma -System_drive_icon_mask_96dpi_real.bmp.lzma -Textual_logo_96dpi_real.bmp.lzma -Textual_logo_288dpi_real.bmp.lzma -Textual_logo_background_real.bmp.lzma -TrueCrypt-16x16_real.xpm.lzma -TrueCrypt_Wizard_real.bmp.lzma -trueCrypt-7.0a-source.tar.gz +trueCrypt-7.1a-source.tar.gz Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-16/sources,v retrieving revision 1.8 retrieving revision 1.9 diff -u -r1.8 -r1.9 --- sources 1 Oct 2011 17:41:47 -0000 1.8 +++ sources 13 Apr 2012 14:57:39 -0000 1.9 @@ -1,13 +1 @@ -a8268630a870faff07af940f63fb29eb trueCrypt-7.1-source.tar.gz -9bc27b99ba35d06ebce2a509959edc59 Drive_icon_96dpi_real.bmp.lzma -28a8f649fffbad0de024322d92a6d98a Drive_icon_mask_96dpi_real.bmp.lzma -5b44c191a46d727249f28ab77deb2e7c Logo_96dpi_real.bmp.lzma -b4e18e24b5c2c67c6381a8b67bd924b0 Logo_288dpi_real.bmp.lzma -8230926fbb7942eae9bb6ddb8f2bbd47 realcrypt_64.png.lzma -9f8fe4f92ad178e83a8be41d6b492793 System_drive_icon_96dpi_real.bmp.lzma -950bc3602d98f5c65df6e70ecba2585c System_drive_icon_mask_96dpi_real.bmp.lzma -3baacce200982d311c66db96bad2c48c Textual_logo_96dpi_real.bmp.lzma -ddbc2c291569fe2e439a7b0f600144c4 Textual_logo_288dpi_real.bmp.lzma -7c2ad91bc612971e6f3b78077c2102a5 Textual_logo_background_real.bmp.lzma -4445bb6d55876805e9e97adcb2377cbf TrueCrypt-16x16_real.xpm.lzma -daa49085339d7b55dccebf2306b0a87e TrueCrypt_Wizard_real.bmp.lzma +102d9652681db11c813610882332ae48 trueCrypt-7.1a-source.tar.gz --- realcrypt-7.0a-rebranding.patch DELETED ---

12 years, 7 months

1
0
0 / 0

rpms/realcrypt/F-16 noexecstack.patch, NONE, 1.1 realcrypt-7.1a-rebranding.patch, NONE, 1.1 realcrypt.spec, 1.17, 1.18

by Leigh Scott

Author: leigh123linux Update of /cvs/nonfree/rpms/realcrypt/F-16 In directory se02.es.rpmfusion.net:/tmp/cvs-serv7891 Modified Files: realcrypt.spec Added Files: noexecstack.patch realcrypt-7.1a-rebranding.patch Log Message: * Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 - update to 7.1a - harden build noexecstack.patch: Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- NEW FILE noexecstack.patch --- --- truecrypt-7.1a-source/Makefile 2012-02-07 10:36:48.000000000 +0000 +++ truecrypt-7.1a-source/Makefile 2012-04-13 15:51:19.007700207 +0100 @@ -39,7 +39,7 @@ export CFLAGS := -Wall export CXXFLAGS := -Wall -Wno-unused-parameter C_CXX_FLAGS := -MMD -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGE_FILES -I$(BASE_DIR) -I$(BASE_DIR)/Crypto export ASFLAGS := -Ox -D __GNUC__ -export LFLAGS := +export LFLAGS := -Wl,-z,noexecstack export PKG_CONFIG_PATH ?= /usr/local/lib/pkgconfig realcrypt-7.1a-rebranding.patch: Common/Language.xml | 638 ++++++------ Main/CommandLineInterface.cpp | 2 truecrypt-7.0a-source/Common/Tcdefs.h | 10 truecrypt-7.0a-source/Core/Unix/CoreService.cpp | 2 truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp | 8 truecrypt-7.0a-source/Core/Unix/CoreUnix.h | 2 truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp | 4 truecrypt-7.0a-source/Driver/Fuse/FuseService.h | 2 truecrypt-7.0a-source/Main/Application.h | 2 truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp | 4 truecrypt-7.0a-source/Main/Forms/Forms.cpp | 18 truecrypt-7.0a-source/Main/Forms/Forms.h | 14 truecrypt-7.0a-source/Main/Forms/MainFrame.cpp | 2 truecrypt-7.0a-source/Main/Forms/MainFrame.h | 2 truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp | 2 truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp | 2 truecrypt-7.0a-source/Main/LanguageStrings.cpp | 20 truecrypt-7.0a-source/Main/UserInterface.cpp | 42 truecrypt-7.0a-source/Makefile | 2 truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp | 4 truecrypt-7.1a-source/Main/GraphicUserInterface.cpp | 51 21 files changed, 397 insertions(+), 436 deletions(-) --- NEW FILE realcrypt-7.1a-rebranding.patch --- --- truecrypt-7.1a-source.orig//Common/Language.xml +++ truecrypt-7.1a-source/Common/Language.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="utf-8"?> -<TrueCrypt> +<RealCrypt> <localization prog-version="7.1a">  <language langid="en" name="English" en-name="English" version="0.0.0" translators="" /> @@ -12,21 +12,21 @@ <control lang="en" key="IDCANCEL">Cancel</control> <control lang="en" key="IDC_ALL_USERS">Install &for all users</control> <control lang="en" key="IDC_BROWSE">Bro&wse...</control> - <control lang="en" key="IDC_DESKTOP_ICON">Add TrueCrypt icon to &desktop</control> + <control lang="en" key="IDC_DESKTOP_ICON">Add RealCrypt icon to &desktop</control> <control lang="en" key="IDC_DONATE">Donate now...</control> - <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with TrueCrypt</control> + <control lang="en" key="IDC_FILE_TYPE">Associate the .tc file &extension with RealCrypt</control> <control lang="en" key="IDC_OPEN_CONTAINING_FOLDER">&Open the destination location when finished</control> - <control lang="en" key="IDC_PROG_GROUP">Add TrueCrypt to &Start menu</control> + <control lang="en" key="IDC_PROG_GROUP">Add RealCrypt to &Start menu</control> <control lang="en" key="IDC_SYSTEM_RESTORE">Create System &Restore point</control> <control lang="en" key="IDC_UNINSTALL">&Uninstall</control> <control lang="en" key="IDC_WIZARD_MODE_EXTRACT_ONLY">&Extract</control> <control lang="en" key="IDC_WIZARD_MODE_INSTALL">&Install</control> - <control lang="en" key="IDD_INSTL_DLG">TrueCrypt Setup Wizard</control> - <control lang="en" key="IDD_UNINSTALL">Uninstall TrueCrypt</control> + <control lang="en" key="IDD_INSTL_DLG">RealCrypt Setup Wizard</control> + <control lang="en" key="IDD_UNINSTALL">Uninstall RealCrypt</control> <control lang="en" key="IDHELP">&Help</control> <control lang="en" key="IDT_EXTRACT_DESTINATION">Please select or type the location where you want to place the extracted files:</control> - <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the TrueCrypt program files. If the specified folder does not exist, it will be automatically created.</control> - <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove TrueCrypt from this system.</control> + <control lang="en" key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the RealCrypt program files. If the specified folder does not exist, it will be automatically created.</control> + <control lang="en" key="IDT_UNINSTALL_DIR">Click Uninstall to remove RealCrypt from this system.</control> <control lang="en" key="IDC_ABORT_BUTTON">Abort</control> <control lang="en" key="IDC_BENCHMARK">&Benchmark</control> <control lang="en" key="IDC_CIPHER_TEST">&Test</control> @@ -38,7 +38,7 @@ <control lang="en" key="IDC_FILE_CONTAINER">Create an encrypted file container</control> <control lang="en" key="IDC_GB">&GB</control> <control lang="en" key="IDC_HIDDEN_SYSENC_INFO_LINK">More information</control> - <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden TrueCrypt volume </control> + <control lang="en" key="IDC_HIDDEN_VOL">Hi&dden RealCrypt volume </control> <control lang="en" key="IDC_HIDDEN_VOL_HELP">More information about hidden volumes</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_DIRECT">Direct mode</control> <control lang="en" key="IDC_HIDVOL_WIZ_MODE_FULL">Normal mode</control> @@ -60,13 +60,13 @@ <control lang="en" key="IDC_SHOW_PASSWORD">&Display password</control> <control lang="en" key="IDC_SHOW_PASSWORD_SINGLE">&Display password</control> <control lang="en" key="IDC_SINGLE_BOOT">Single-boot</control> - <control lang="en" key="IDC_STD_VOL">Standard TrueCrypt volume</control> + <control lang="en" key="IDC_STD_VOL">Standard RealCrypt volume</control> <control lang="en" key="IDC_SYSENC_HIDDEN">Hi&dden</control> <control lang="en" key="IDC_SYSENC_NORMAL">Normal</control> <control lang="en" key="IDC_SYS_DEVICE">Encrypt the system partition or entire system drive</control> <control lang="en" key="IDC_SYS_PARTITION">Encrypt the Windows system partition</control> <control lang="en" key="IDC_WHOLE_SYS_DRIVE">Encrypt the whole drive</control> - <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDD_VOL_CREATION_WIZARD_DLG">RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDT_CLUSTER">Cluster </control> <control lang="en" key="IDT_COLLECTING_RANDOM_DATA_NOTE">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Next to continue.</control> <control lang="en" key="IDT_CONFIRM">&Confirm:</control> @@ -96,8 +96,8 @@ <control lang="en" key="IDCLOSE">Close</control> <control lang="en" key="IDC_ALLOW_ESC_PBA_BYPASS">Allow pre-boot &authentication to be bypassed by pressing the Esc key (enables boot manager)</control> <control lang="en" key="IDC_AUTORUN_DISABLE">Do nothing</control> - <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount TrueCrypt volume (specified below)</control> - <control lang="en" key="IDC_AUTORUN_START">&Start TrueCrypt</control> + <control lang="en" key="IDC_AUTORUN_MOUNT">&Auto-mount RealCrypt volume (specified below)</control> + <control lang="en" key="IDC_AUTORUN_START">&Start RealCrypt</control> <control lang="en" key="IDC_AUTO_DETECT_PKCS11_MODULE">Auto-&Detect Library</control> <control lang="en" key="IDC_BOOT_LOADER_CACHE_PASSWORD">&Cache pre-boot authentication password in driver memory (for mounting of non-system volumes)</control> <control lang="en" key="IDC_BROWSE_DIRS">Browse...</control> @@ -105,7 +105,7 @@ <control lang="en" key="IDC_CACHE">Cache passwords and keyfil&es in memory</control> <control lang="en" key="IDC_CLOSE_BKG_TASK_WHEN_NOVOL">Exit when there are no mounted volumes</control> <control lang="en" key="IDC_CLOSE_TOKEN_SESSION_AFTER_MOUNT">&Close token session (log out) after a volume is successfully mounted</control> - <control lang="en" key="IDC_COPY_WIZARD">Include TrueCrypt Volume Creation Wizard</control> + <control lang="en" key="IDC_COPY_WIZARD">Include RealCrypt Volume Creation Wizard</control> <control lang="en" key="IDC_CREATE">Create</control> <control lang="en" key="IDC_CREATE_VOLUME">&Create Volume</control> <control lang="en" key="IDC_DISABLE_BOOT_LOADER_OUTPUT">Do not &show any texts in the pre-boot authentication screen (except the below custom message)</control> @@ -148,8 +148,8 @@ <control lang="en" key="IDC_PREF_DISMOUNT_POWERSAVING">Entering power saving mode</control> <control lang="en" key="IDC_PREF_DISMOUNT_SCREENSAVER">Screen saver is launched</control> <control lang="en" key="IDC_PREF_FORCE_AUTO_DISMOUNT">Force auto-dismount even if volume contains open files or directories</control> - <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted TrueCrypt volumes</control> - <control lang="en" key="IDC_PREF_LOGON_START">Start TrueCrypt Background Task</control> + <control lang="en" key="IDC_PREF_LOGON_MOUNT_DEVICES">Mount all device-hosted RealCrypt volumes</control> + <control lang="en" key="IDC_PREF_LOGON_START">Start RealCrypt Background Task</control> <control lang="en" key="IDC_PREF_MOUNT_READONLY">Mount volumes as read-only</control> <control lang="en" key="IDC_PREF_MOUNT_REMOVABLE">Mount volumes as removable media</control> <control lang="en" key="IDC_PREF_OPEN_EXPLORER">Open Explorer window for successfully mounted volume</control> @@ -169,17 +169,17 @@ <control lang="en" key="IDC_VOLUME_PROPERTIES">&Volume Properties...</control> <control lang="en" key="IDC_VOLUME_TOOLS">Volume &Tools...</control> <control lang="en" key="IDC_WIPE_CACHE">&Wipe Cache</control> - <control lang="en" key="IDD_FAVORITE_VOLUMES">TrueCrypt - Favorite Volumes</control> - <control lang="en" key="IDD_HOTKEYS_DLG">TrueCrypt - System-Wide Hot Keys</control> - <control lang="en" key="IDD_MOUNT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_FAVORITE_VOLUMES">RealCrypt - Favorite Volumes</control> + <control lang="en" key="IDD_HOTKEYS_DLG">RealCrypt - System-Wide Hot Keys</control> + <control lang="en" key="IDD_MOUNT_DLG">RealCrypt</control> <control lang="en" key="IDD_PASSWORDCHANGE_DLG">Change Password or Keyfiles</control> - <control lang="en" key="IDD_PASSWORD_DLG">Enter TrueCrypt Volume Password</control> - <control lang="en" key="IDD_PERFORMANCE_SETTINGS">TrueCrypt - Performance Options</control> - <control lang="en" key="IDD_PREFERENCES_DLG">TrueCrypt - Preferences</control> - <control lang="en" key="IDD_SYSENC_SETTINGS">TrueCrypt - System Encryption Settings</control> - <control lang="en" key="IDD_TOKEN_PREFERENCES">TrueCrypt - Security Token Preferences</control> - <control lang="en" key="IDD_TRAVELER_DLG">TrueCrypt Traveler Disk Setup</control> - <control lang="en" key="IDD_VOLUME_PROPERTIES">TrueCrypt Volume Properties</control> + <control lang="en" key="IDD_PASSWORD_DLG">Enter RealCrypt Volume Password</control> + <control lang="en" key="IDD_PERFORMANCE_SETTINGS">RealCrypt - Performance Options</control> + <control lang="en" key="IDD_PREFERENCES_DLG">RealCrypt - Preferences</control> + <control lang="en" key="IDD_SYSENC_SETTINGS">RealCrypt - System Encryption Settings</control> + <control lang="en" key="IDD_TOKEN_PREFERENCES">RealCrypt - Security Token Preferences</control> + <control lang="en" key="IDD_TRAVELER_DLG">RealCrypt Traveler Disk Setup</control> + <control lang="en" key="IDD_VOLUME_PROPERTIES">RealCrypt Volume Properties</control> <control lang="en" key="IDM_ABOUT">About</control> <control lang="en" key="IDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume...</control> <control lang="en" key="IDM_ADD_VOLUME_TO_FAVORITES">Add Mounted Volume to Favorites...</control> @@ -241,7 +241,7 @@ <control lang="en" key="IDM_VERSION_HISTORY">Version History</control> <control lang="en" key="IDM_VOLUME_PROPERTIES">Volume Properties</control> <control lang="en" key="IDM_VOLUME_WIZARD">Volume Creation Wizard</control> - <control lang="en" key="IDM_WEBSITE">TrueCrypt Website</control> + <control lang="en" key="IDM_WEBSITE">RealCrypt Website</control> <control lang="en" key="IDM_WIPE_CACHE">Wipe Cached Passwords</control> <control lang="en" key="IDOK">OK</control> <control lang="en" key="IDT_ACCELERATION_OPTIONS">Hardware Acceleration</control> @@ -270,8 +270,8 @@ <control lang="en" key="IDT_PKCS5_PRF">PKCS-5 PRF:</control> <control lang="en" key="IDT_PW_CACHE_OPTIONS">Password Cache</control> <control lang="en" key="IDT_SECURITY_OPTIONS">Security Options</control> - <control lang="en" key="IDT_TASKBAR_ICON">TrueCrypt Background Task</control> - <control lang="en" key="IDT_TRAVELER_MOUNT">TrueCrypt volume to mount (relative to traveler disk root):</control> + <control lang="en" key="IDT_TASKBAR_ICON">RealCrypt Background Task</control> + <control lang="en" key="IDT_TRAVELER_MOUNT">RealCrypt volume to mount (relative to traveler disk root):</control> <control lang="en" key="IDT_TRAVEL_INSERTION">Upon insertion of traveler disk: </control> <control lang="en" key="IDT_TRAVEL_ROOT">Create traveler disk files at (traveler disk root directory):</control> <control lang="en" key="IDT_VOLUME">Volume</control> @@ -306,18 +306,18 @@ <control lang="en" key="IDC_TOKEN_FILES_ADD">Add &Token Files...</control> <control lang="en" key="IDC_USE_EMBEDDED_HEADER_BAK">Use backup header embedded in &volume if available</control> <control lang="en" key="IDC_XTS_MODE_ENABLED">XTS mode</control> - <control lang="en" key="IDD_ABOUT_DLG">About TrueCrypt</control> - <control lang="en" key="IDD_BENCHMARK_DLG">TrueCrypt - Encryption Algorithm Benchmark</control> - <control lang="en" key="IDD_CIPHER_TEST_DLG">TrueCrypt - Test Vectors</control> + <control lang="en" key="IDD_ABOUT_DLG">About RealCrypt</control> + <control lang="en" key="IDD_BENCHMARK_DLG">RealCrypt - Encryption Algorithm Benchmark</control> + <control lang="en" key="IDD_CIPHER_TEST_DLG">RealCrypt - Test Vectors</control> <control lang="en" key="IDD_COMMANDHELP_DLG">Command Line Help</control> - <control lang="en" key="IDD_KEYFILES">TrueCrypt - Keyfiles</control> - <control lang="en" key="IDD_KEYFILE_GENERATOR">TrueCrypt - Keyfile Generator</control> - <control lang="en" key="IDD_LANGUAGE">TrueCrypt - Language</control> - <control lang="en" key="IDD_MOUNT_OPTIONS">TrueCrypt - Mount Options</control> + <control lang="en" key="IDD_KEYFILES">RealCrypt - Keyfiles</control> + <control lang="en" key="IDD_KEYFILE_GENERATOR">RealCrypt - Keyfile Generator</control> + <control lang="en" key="IDD_LANGUAGE">RealCrypt - Language</control> + <control lang="en" key="IDD_MOUNT_OPTIONS">RealCrypt - Mount Options</control> <control lang="en" key="IDD_NEW_TOKEN_KEYFILE">New Security Token Keyfile Properties</control> - <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">TrueCrypt - Random Pool Enrichment</control> + <control lang="en" key="IDD_RANDOM_POOL_ENRICHMENT">RealCrypt - Random Pool Enrichment</control> <control lang="en" key="IDD_RAWDEVICES_DLG">Select a Partition or Device</control> - <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">TrueCrypt</control> + <control lang="en" key="IDD_STATIC_MODELESS_WAIT_DLG">RealCrypt</control> <control lang="en" key="IDD_TOKEN_KEYFILES">Security Token Keyfiles</control> <control lang="en" key="IDD_TOKEN_PASSWORD">Security token password/PIN required</control> <control lang="en" key="IDT_ACTIVE_LANG_PACK">Active language pack</control> @@ -359,15 +359,15 @@ <string lang="en" key="ACCESSMODEFAIL">The read-only attribute on your old volume could not be changed. Please check the file access permissions.</string> <string lang="en" key="ACCESS_DENIED">Error: Access denied.\n\nThe partition you are trying to access is either 0 sectors long, or it is the boot device.</string> <string lang="en" key="ADMINISTRATOR">Administrator</string> - <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the TrueCrypt driver, you need to be logged into an account with administrator privileges.</string> + <string lang="en" key="ADMIN_PRIVILEGES_DRIVER">In order to load the RealCrypt driver, you need to be logged into an account with administrator privileges.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_DEVICES">Please note that in order to encrypt/format a partition/device you need to be logged into an account with administrator privileges.\n\nThis does not apply to file-hosted volumes.</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_HIDVOL">In order to create a hidden volume you need to be logged into an account with administrator privileges.\n\nContinue?</string> <string lang="en" key="ADMIN_PRIVILEGES_WARN_NTFS">Please note that in order to format the volume as NTFS you need to be logged into an account with administrator privileges.\n\nWithout administrator privileges, you can format the volume as FAT.</string> <string lang="en" key="AES_HELP">FIPS-approved cipher (Rijndael, published in 1998) that may be used by U.S. government departments and agencies to protect classified information up to the Top Secret level. 256-bit key, 128-bit block, 14 rounds (AES-256). Mode of operation is XTS.</string> <string lang="en" key="ALREADY_MOUNTED">Volume is already mounted.</string> - <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nTrueCrypt installation may be corrupted.</string> + <string lang="en" key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nRealCrypt installation may be corrupted.</string> <string lang="en" key="ERR_NOT_ENOUGH_RANDOM_DATA">CAUTION: There is not enough data in the Random Number Generator pool to provide the requested amount of random data.\n\nYou should not proceed any further. Please select 'Report a Bug' from the Help menu, and report this error.</string> - <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with TrueCrypt. Therefore, please do NOT report this as a bug/problem in TrueCrypt and please do NOT ask for help with this in the TrueCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> + <string lang="en" key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with RealCrypt. Therefore, please do NOT report this as a bug/problem in RealCrypt and please do NOT ask for help with this in the RealCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</string> <string lang="en" key="DEVICE_NOT_READY_ERROR">If you are accessing a drive for removable media, please make sure that a medium is inserted in the drive. The drive/medium may also be damaged (there may be a physical defect on it) or a cable may be damaged/disconnected.</string> <string lang="en" key="WHOLE_DRIVE_ENCRYPTION_PREVENTED_BY_DRIVERS">Your system appears to be using custom chipset drivers containing a bug that prevents encryption of the whole system drive.\n\nPlease try updating or uninstalling any custom (non-Microsoft) chipset drivers before proceeding. If it does not help, try encrypting the system partition only.</string> <string lang="en" key="BAD_DRIVE_LETTER">Invalid drive letter.</string> @@ -377,13 +377,13 @@ <string lang="en" key="CAPSLOCK_ON">Warning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="VOLUME_TYPE_TITLE">Volume Type</string> <string lang="en" key="HIDDEN_VOLUME_TYPE_HELP">It may happen that you are forced by somebody to reveal the password to an encrypted volume. There are many situations where you cannot refuse to reveal the password (for example, due to extortion). Using a so-called hidden volume allows you to solve such situations without revealing the password to your volume.</string> - <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal TrueCrypt volume.</string> + <string lang="en" key="NORMAL_VOLUME_TYPE_HELP">Select this option if you want to create a normal RealCrypt volume.</string> <string lang="en" key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</string> <string lang="en" key="CIPHER_HIDVOL_HOST_TITLE">Outer Volume Encryption Options</string> <string lang="en" key="CIPHER_HIDVOL_TITLE">Hidden Volume Encryption Options</string> <string lang="en" key="CIPHER_TITLE">Encryption Options</string> <string lang="en" key="CLEAN_WINMRU_FAILED">WARNING: Failed to clear the path of the last selected volume/keyfile (remembered by file selector)!</string> - <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. TrueCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in TrueCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> + <string lang="en" key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. RealCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in RealCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</string> <string lang="en" key="CREATE_FAILED">Failed to create volume %hs</string> <string lang="en" key="DEVICE_FREE_BYTES">Size of %hs is %.2f bytes</string> <string lang="en" key="DEVICE_FREE_KB">Size of %hs is %.2f KB</string> @@ -393,20 +393,20 @@ <string lang="en" key="DEVICE_FREE_PB">Size of %hs is %.2f PB</string> <string lang="en" key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</string> <string lang="en" key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</string> - <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in TrueCrypt may be wrong now. Therefore, exit the TrueCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf TrueCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> + <string lang="en" key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'Ne w Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in RealCrypt may be wrong now. Therefore, exit the RealCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf RealCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</string> <string lang="en" key="INPLACE_ENC_CANT_LOCK_OR_DISMOUNT_FILESYS">Error: The filesystem could not be locked and/or dismounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</string> <string lang="en" key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable TrueCrypt to format it safely.</string> - <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable TrueCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable RealCrypt to format it safely.</string> + <string lang="en" key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable RealCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</string> <string lang="en" key="WHOLE_NONSYS_DEVICE_ENC_CONFIRM">Warning: If you encrypt the entire device (as opposed to encrypting only a partition on it), operating systems will consider the device as new, empty, and unformatted (as it will contain no partition table) and may spontaneously initialize the device (or ask you if you want to do so), which may damage the volume. Furthermore, it will not be possible to consistently mount the volume as favorite (e.g. when the drive number changes) or to assign a favorite-volume label to it.\n\nTo avoid that you may want to consider creating a partition on the device and encrypting the partition instead.\n\nAre you sure want to encrypt the entire device?</string> - <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main TrueCrypt window (alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main TrueCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the TrueCrypt FAQ, and assign it to another partition/device).</string> + <string lang="en" key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main RealCrypt window (alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main RealCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the RealCrypt FAQ, and assign it to another partition/device).</string> <string lang="en" key="OS_NOT_SUPPORTED_FOR_NONSYS_INPLACE_ENC">In-place encryption of non-system volumes is not supported on the version of the operating system you are currently using (it is supported only on Windows Vista and later versions of Windows).\n\nThe reason is that this version of Windows does not support shrinking of a filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> <string lang="en" key="ONLY_NTFS_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nNote: The reason is that Windows does not support shrinking of other types of filesystems (the filesystem needs to be shrunk to make space for the volume header and backup header).</string> - <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted TrueCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. TrueCrypt cannot encrypt it in place.</string> - <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a TrueCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted TrueCrypt volume (that has been created and mounted in step 1). That way, you will create a TrueCrypt-encrypted backup of the data.\n\n3) Create a TrueCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the TrueCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup TrueCrypt volume (created and mounted in step 1) to the mounted TrueCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> - <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted TrueCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> - <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: TrueCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> + <string lang="en" key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted RealCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. RealCrypt cannot encrypt it in place.</string> + <string lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a RealCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted RealCrypt volume (that has been created and mounted in step 1). That way, you will create a RealCrypt-encrypted backup of the data.\n\n3) Create a RealCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the RealCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup RealCrypt volume (created and mounted in step 1) to the mounted RealCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the da ta will be encrypted and, in addition, there will be an encrypted backup of the data.</string> + <string lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted RealCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</string> + <string lang="en" key="INPLACE_ENC_INVALID_PATH">Error: RealCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</string> <string lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</string> <string lang="en" key="DISK_FREE_BYTES">Free space on drive %hs is %.2f bytes.</string> @@ -416,47 +416,47 @@ <string lang="en" key="DISK_FREE_TB">Free space on drive %hs is %.2f TB</string> <string lang="en" key="DISK_FREE_PB">Free space on drive %hs is %.2f PB</string> <string lang="en" key="DRIVELETTERS">Could not get available drive letters.</string> - <string lang="en" key="DRIVER_NOT_FOUND">Error: TrueCrypt driver not found.\n\nPlease copy the files 'truecrypt.sys' and 'truecrypt-x64.sys' to the directory where the main TrueCrypt application (TrueCrypt.exe) is located.</string> - <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the TrueCrypt driver is currently running.\n\nIf you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already installed, you must uninstall it first (or upgrade it using the TrueCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > TrueCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > TrueCrypt > Remove.\n\nSimilarly, if you are trying to run TrueCrypt in portable mode (i.e. without installing it) and a different version of TrueCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> + <string lang="en" key="DRIVER_NOT_FOUND">Error: RealCrypt driver not found.\n\nPlease copy the files 'realcrypt.sys' and 'realcrypt-x64.sys' to the directory where the main RealCrypt application (RealCrypt.exe) is located.</string> + <string lang="en" key="DRIVER_VERSION">Error: An incompatible version of the RealCrypt driver is currently running.\n\nIf you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already installed, you must uninstall it first (or upgrade it using the RealCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > RealCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > RealCrypt > Remove.\n\nSimilarly, if you are trying to run RealCrypt in portable mode (i.e. without installing it) and a different version of RealCrypt is already running in portable mode, you must restart the system first and then run only this new version.</string> <string lang="en" key="ERR_CIPHER_INIT_FAILURE">Error: Cipher initialization failure.</string> <string lang="en" key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</string> - <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and TrueCrypt must be terminated. If this is caused by a bug in TrueCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- TrueCrypt component name\n- Checksum of TrueCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- TrueCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> - <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nNote that this error has not been caused by TrueCrypt (so the TrueCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> - <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires TrueCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> - <string lang="en" key="EXCEPTION_REPORT_TITLE">TrueCrypt Critical Error</string> - <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">TrueCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want TrueCrypt to check whether a bug in TrueCrypt could have caused the system crash?</string> - <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want TrueCrypt to continue detecting system crashes?</string> - <string lang="en" key="NO_MINIDUMP_FOUND">TrueCrypt found no system crash minidump file.</string> + <string lang="en" key="EXCEPTION_REPORT">A critical error has occurred and RealCrypt must be terminated. If this is caused by a bug in RealCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- RealCrypt component name\n- Checksum of RealCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- RealCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</string> + <string lang="en" key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nNote that this error has not been caused by RealCrypt (so the RealCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</string> + <string lang="en" key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires RealCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</string> + <string lang="en" key="EXCEPTION_REPORT_TITLE">RealCrypt Critical Error</string> + <string lang="en" key="SYSTEM_CRASHED_ASK_REPORT">RealCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want RealCrypt to check whether a bug in RealCrypt could have caused the system crash?</string> + <string lang="en" key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want RealCrypt to continue detecting system crashes?</string> + <string lang="en" key="NO_MINIDUMP_FOUND">RealCrypt found no system crash minidump file.</string> <string lang="en" key="ASK_DELETE_KERNEL_CRASH_DUMP">Do you want to delete the Windows crash dump file to free up disk space?</string> - <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, TrueCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the truecrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> - <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, TrueCrypt will analyze the system crash. This may take up to several minutes.</string> + <string lang="en" key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, RealCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the realcrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</string> + <string lang="en" key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, RealCrypt will analyze the system crash. This may take up to several minutes.</string> <string lang="en" key="DEBUGGER_NOT_FOUND">Please make sure the environment variable 'PATH' includes the path to 'kd.exe' (Kernel Debugger).</string> - <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that TrueCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> + <string lang="en" key="SYSTEM_CRASH_NO_TRUECRYPT">It appears that RealCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</string> <string lang="en" key="SYSTEM_CRASH_UPDATE_DRIVER">Results of the analysis indicate that updating the following driver might solve this issue: </string> - <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in TrueCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> + <string lang="en" key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in RealCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</string> <string lang="en" key="ASK_SEND_ERROR_REPORT">Do you want to send us the above error report?</string> <string lang="en" key="ENCRYPT">&Encrypt</string> <string lang="en" key="DECRYPT">&Decrypt</string> <string lang="en" key="PERMANENTLY_DECRYPT">&Permanently Decrypt</string> <string lang="en" key="EXIT">Exit</string> <string lang="en" key="EXT_PARTITION">Please create a logical drive for this extended partition, and then try again.</string> - <string lang="en" key="FILE_HELP">A TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, TrueCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created TrueCrypt container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container that you are about to create now.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA TrueCrypt volume can reside in a file (called TrueCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A TrueCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, TrueCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the TrueCrypt container you are about to create now.</string> - <string lang="en" key="DEVICE_HELP">Encrypted device-hosted TrueCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted TrueCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> - <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted TrueCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> + <string lang="en" key="FILE_HELP">A RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, RealCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created RealCrypt container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container that you are about to create now.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA RealCrypt volume can reside in a file (called RealCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A RealCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, RealCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the RealCrypt container you are about to create now.</string> + <string lang="en" key="DEVICE_HELP">Encrypted device-hosted RealCrypt volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Partitions can also be encrypted in place.\n\nIn addition, encrypted device-hosted RealCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nNote: A device that contains partitions can be entirely encrypted in place (using a single key) only if it is the drive where Windows is installed and from which it boots.</string> + <string lang="en" key="DEVICE_HELP_NO_INPLACE">A device-hosted RealCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> <string lang="en" key="DEVICE_HELP_HIDDEN_HOST_VOL">\nSelect the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nOuter volumes can be created within partitions on hard disks, solid-state drives, USB memory sticks, and on any other supported storage devices. Outer volumes can also be created within devices that do not contain any partitions (including hard disks and solid-state drives).\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</string> - <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the TrueCrypt volume within which you wish to create a hidden volume.</string> + <string lang="en" key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nSelect the location of the RealCrypt volume within which you wish to create a hidden volume.</string> <string lang="en" key="FILE_IN_USE">WARNING: The host file/device is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device (for example, antivirus or backup applications) should be closed before mounting the volume.\n\nContinue mounting?</string> <string lang="en" key="FILE_IN_USE_FAILED">Error: Cannot mount volume. The host file/device is already in use. Attempt to mount without exclusive access failed as well.</string> <string lang="en" key="FILE_OPEN_FAILED">The file could not be opened.</string> <string lang="en" key="FILE_TITLE">Volume Location</string> <string lang="en" key="FILESYS_PAGE_TITLE">Large Files</string> - <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this TrueCrypt volume?</string> - <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, TrueCrypt will choose a suitable default file system for the TrueCrypt volume (you will be able to select a file system in the next step).</string> + <string lang="en" key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this RealCrypt volume?</string> + <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, RealCrypt will choose a suitable default file system for the RealCrypt volume (you will be able to select a file system in the next step).</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</string> <string lang="en" key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_TITLE">Volume Creation Mode</string> - <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted TrueCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> + <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">This is the fastest way to create a partition-hosted or device-hosted RealCrypt volume (in-place encryption, which is the other option, is slower because content of each sector has to be first read, encrypted, and then written). Any data currently stored on the selected partition/device will be lost (the data will NOT be encrypted; it will be overwritten with random data). If you want to encrypt existing data on a partition, choose the other option.</string> <string lang="en" key="DEVICE_TRANSFORM_MODE_PAGE_INPLACE_HELP">The entire selected partition and all data stored on it will be encrypted in place. If the partition is empty, you should choose the other option (the volume will be created much faster).</string> <string lang="en" key="NOTE_BEGINNING">Note: </string> <string lang="en" key="RESUME">&Resume</string> @@ -471,52 +471,52 @@ <string lang="en" key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</string> <string lang="en" key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</string> <string lang="en" key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system TrueCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> + <string lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system RealCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</string> <string lang="en" key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</string> - <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe TrueCrypt volume has been created and is ready for use. If you wish to create another TrueCrypt volume, click Next. Otherwise, click Exit.</string> - <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden TrueCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> + <string lang="en" key="FORMAT_FINISHED_HELP">\n\nThe RealCrypt volume has been created and is ready for use. If you wish to create another RealCryptRealCrypt volume, click Next. Otherwise, click Exit.</string> + <string lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden RealCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</string> <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_TITLE">Volume Fully Encrypted</string> - <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED TRUECRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN TRUECRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main TrueCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main TrueCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted TrueCrypt volume now) and is ready for use.</string> - <string lang="en" key="FORMAT_FINISHED_INFO">The TrueCrypt volume has been successfully created.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED REALCRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN REALCRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main RealCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main RealCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted RealCrypt volume now) and is ready for use.</string> + <string lang="en" key="FORMAT_FINISHED_INFO">The RealCrypt volume has been successfully created.</string> <string lang="en" key="FORMAT_FINISHED_TITLE">Volume Created</string> <string lang="en" key="FORMAT_HELP">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click Format to create the volume.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_HELP">Click Format to create the outer volume. For more information, please refer to the documentation.</string> <string lang="en" key="FORMAT_HIDVOL_HOST_TITLE">Outer Volume Format</string> <string lang="en" key="FORMAT_HIDVOL_TITLE">Hidden Volume Format</string> <string lang="en" key="FORMAT_TITLE">Volume Format</string> - <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the TrueCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal TrueCrypt volume and then a hidden TrueCrypt volume within it. Inexperienced users should always select this option.</string> - <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing TrueCrypt volume. It will be assumed that you have already created a TrueCrypt volume that is suitable to host the hidden volume.</string> + <string lang="en" key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the RealCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">If you select this option, the wizard will first help you create a normal RealCrypt volume and then a hidden RealCrypt volume within it. Inexperienced users should always select this option.</string> + <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">If you select this option, you will create a hidden volume within an existing RealCrypt volume. It will be assumed that you have already created a RealCrypt volume that is suitable to host the hidden volume.</string> <string lang="en" key="HIDDEN_VOL_WIZARD_MODE_TITLE">Volume Creation Mode</string> <string lang="en" key="HIDVOL_FORMAT_FINISHED_TITLE">Hidden Volume Created</string> - <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden TrueCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE TRUECRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> + <string lang="en" key="HIDVOL_FORMAT_FINISHED_HELP">The hidden RealCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE REALCRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</string> <string lang="en" key="FIRST_HIDDEN_OS_BOOT_INFO">You have started the hidden operating system. As you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system. However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the original system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that will be used for the decoy operating system).\n\n\nPlease click Next to continue.</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</string> <string lang="en" key="HIDVOL_HOST_FILLING_HELP">Outer volume has been successfully created and mounted as drive %hc:. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, cluster bitmap of the outer volume will be scanned to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. Cluster bitmap scanning ensures that no data on the outer volume are overwritten by the hidden volume.</string> <string lang="en" key="HIDVOL_HOST_FILLING_TITLE">Outer Volume Contents</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nIn the next steps, you will set the options for the outer volume (within which the hidden volume will be created later on). </string> - <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer TrueCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> + <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer RealCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</string> <string lang="en" key="HIDVOL_HOST_PRE_CIPHER_TITLE">Outer Volume</string> <string lang="en" key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system.\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</string> - <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).</string> + <string lang="en" key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).</string> <string lang="en" key="HIDVOL_PRE_CIPHER_HELP">\n\nThe volume cluster bitmap has been scanned and the maximum possible size of the hidden volume has been determined. In the next steps you will set the options, the size, and the password for the hidden volume.</string> <string lang="en" key="HIDVOL_PRE_CIPHER_TITLE">Hidden Volume</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, TrueCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> - <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! TrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time TrueCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new TrueCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, RealCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</string> + <string lang="en" key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! RealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time RealCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new RealCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the ou ter and the hidden part). We strongly recommend that you restart the operating system now.</string> <string lang="en" key="CANNOT_SATISFY_OVER_4G_FILE_SIZE_REQ">You have indicated intent to store files larger than 4 GB on the volume. This requires the volume to be formatted as NTFS, which, however, will not be possible.</string> - <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden TrueCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by TrueCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> - <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal TrueCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the TrueCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden TrueCrypt volumes are mounted as read-only (no data can be written to such filesystems or TrueCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden TrueCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> - <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden TrueCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. TrueCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> - <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal TrueCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a TrueCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> + <string lang="en" key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden RealCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by RealCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</string> + <string lang="en" key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal RealCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the RealCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidde n volume within it.</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden RealCrypt volumes are mounted as read-only (no data can be written to such filesystems or RealCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden RealCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</string> + <string lang="en" key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden RealCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corru ption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. RealCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</string> + <string lang="en" key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal RealCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a RealCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</string> <string lang="en" key="CONFIRM_RESTART">Your computer must be restarted.\n\nDo you want to restart it now?</string> <string lang="en" key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">An error occurred when obtaining the system encryption status.</string> <string lang="en" key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</string> <string lang="en" key="INIT_RAND">Failed to initialize the random number generator!</string> <string lang="en" key="INIT_REGISTER">Unable to initialize the application. Failed to register the Dialog class.</string> <string lang="en" key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</string> - <string lang="en" key="INTRO_TITLE">TrueCrypt Volume Creation Wizard</string> + <string lang="en" key="INTRO_TITLE">RealCrypt Volume Creation Wizard</string> <string lang="en" key="MAX_HIDVOL_SIZE_BYTES">Maximum possible hidden volume size for this volume is %.2f bytes.</string> <string lang="en" key="MAX_HIDVOL_SIZE_KB">Maximum possible hidden volume size for this volume is %.2f KB.</string> <string lang="en" key="MAX_HIDVOL_SIZE_MB">Maximum possible hidden volume size for this volume is %.2f MB.</string> @@ -524,13 +524,13 @@ <string lang="en" key="MOUNTED_NOPWCHANGE">Volume password/keyfiles cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNTED_NO_PKCS5_PRF_CHANGE">The header key derivation algorithm cannot be changed while the volume is mounted. Please dismount the volume first.</string> <string lang="en" key="MOUNT_BUTTON">&Mount</string> - <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of TrueCrypt is required to mount this volume.</string> - <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'TrueCrypt Format.exe' is in the folder from which 'TrueCrypt.exe' was launched. If it is not, please reinstall TrueCrypt, or locate 'TrueCrypt Format.exe' on your disk and run it.</string> + <string lang="en" key="NEW_VERSION_REQUIRED">A newer version of RealCrypt is required to mount this volume.</string> + <string lang="en" key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'RealCrypt Format.exe' is in the folder from which 'RealCrypt.exe' was launched. If it is not, please reinstall RealCrypt, or locate 'RealCrypt Format.exe' on your disk and run it.</string> <string lang="en" key="NEXT">&Next ></string> <string lang="en" key="FINALIZE">&Finish</string> <string lang="en" key="INSTALL">&Install</string> <string lang="en" key="EXTRACT">E&xtract</string> - <string lang="en" key="NODRIVER">Unable to connect to the TrueCrypt device driver. TrueCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> + <string lang="en" key="NODRIVER">Unable to connect to the RealCrypt device driver. RealCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</string> <string lang="en" key="NOFONT">Error occurred when loading/preparing fonts.</string> <string lang="en" key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</string> <string lang="en" key="DRIVE_LETTER_UNAVAILABLE">Drive letter not available.</string> @@ -543,37 +543,37 @@ <string lang="en" key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</string> <string lang="en" key="OPENFILES_DRIVER">The driver is unable to dismount the volume. Some files located on the volume are probably still open.</string> <string lang="en" key="OPENFILES_LOCK">Unable to lock the volume. There are still open files on the volume. Therefore, it cannot be dismounted.</string> - <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">TrueCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> - <string lang="en" key="OPEN_VOL_TITLE">Select a TrueCrypt Volume</string> + <string lang="en" key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">RealCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</string> + <string lang="en" key="OPEN_VOL_TITLE">Select a RealCrypt Volume</string> <string lang="en" key="OPEN_TITLE">Specify Path and File Name</string> <string lang="en" key="SELECT_PKCS11_MODULE">Select PKCS #11 Library</string> <string lang="en" key="OUTOFMEMORY">Out of Memory</string> - <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a TrueCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a TrueCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a TrueCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the TrueCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> - <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: TRUECRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new TrueCrypt container?</string> + <string lang="en" key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a RealCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a RealCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a RealCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the RealCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</string> + <string lang="en" key="OVERWRITEPROMPT">WARNING: The file '%hs' already exists!\n\nIMPORTANT: REALCRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new RealCrypt container?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE">CAUTION: ALL FILES CURRENTLY STORED ON THE SELECTED %s '%hs'%s WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%hs'%s?</string> - <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt.\n\nDo you have such a backup?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%hs'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</string> <string lang="en" key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</string> - <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a TrueCrypt volume within it</string> + <string lang="en" key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a RealCrypt volume within it</string> <string lang="en" key="PASSWORD">Password</string> <string lang="en" key="IDD_PCDM_CHANGE_PKCS5_PRF">Set Header Key Derivation Algorithm</string> <string lang="en" key="IDD_PCDM_ADD_REMOVE_VOL_KEYFILES">Add/Remove Keyfiles to/from Volume</string> <string lang="en" key="IDD_PCDM_REMOVE_ALL_KEYFILES_FROM_VOL">Remove All Keyfiles from Volume</string> - <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the TrueCrypt User Guide.</string> - <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your TrueCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the TrueCrypt Rescue Disk and entering the old password). You should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your TrueCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new TrueCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new TrueCrypt Rescue Disk?</string> - <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a TrueCrypt keyfile. Note that TrueCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> + <string lang="en" key="PASSWORD_CHANGED">Password and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the RealCrypt User Guide.</string> + <string lang="en" key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your RealCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the RealCrypt Rescue Disk and entering the old password). You should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your RealCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new RealCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new RealCrypt Rescue Disk?</string> + <string lang="en" key="KEYFILES_NOTE">Any kind of file (for example, .mp3, .jpg, .zip, .avi) may be used as a RealCrypt keyfile. Note that RealCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</string> <string lang="en" key="KEYFILE_CHANGED">Keyfile(s) successfully added/removed.</string> <string lang="en" key="KEYFILE_EXPORTED">Keyfile exported.</string> <string lang="en" key="PKCS5_PRF_CHANGED">Header key derivation algorithm successfully set.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, TrueCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the TrueCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system volume where you want to resume the process of in-place encryption.\n\n\nRemark: After you click Next, RealCrypt will attempt to find all non-system volumes where the process of encryption has been interrupted and where the RealCrypt volume header can be decrypted using the supplied password and/or keyfile(s). If more than one such volume is found, you will need to select one of them in the next step.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</string> <string lang="en" key="PASSWORD_HELP">It is very important that you choose a good password. You should avoid choosing one that contains only a single word that can be found in a dictionary (or a combination of 2, 3, or 4 such words). It should not contain any names or dates of birth. It should not be easy to guess. A good password is a random combination of upper and lower case letters, numbers, and special characters, such as @ ^ = $ * + etc. We recommend choosing a password consisting of more than 20 characters (the longer, the better). The maximum possible length is 64 characters.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HELP">Please choose a password for the hidden volume. </string> <string lang="en" key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </string> <string lang="en" key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password that you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</string> - <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, TrueCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> + <string lang="en" key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Please enter the password for the volume within which you wish to create a hidden volume.\n\nAfter you click Next, RealCrypt will attempt to mount the volume. As soon as the volume is mounted, its cluster bitmap will be scanned to determine the size of the uninterrupted area of free space (if there is any) whose end is aligned with the end of the volume. This area will accommodate the hidden volume and therefore will limit its maximum possible size. Cluster map scanning is necessary to ensure that no data on the outer volume will be overwritten by the hidden volume.</string> <string lang="en" key="PASSWORD_HIDDENVOL_HOST_HELP">\nPlease choose a password for the outer volume. This will be the password that you will be able to reveal to an adversary if you are asked or forced to do so.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume.\n\nNote: The maximum possible password length is 64 characters.</string> <string lang="en" key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</string> <string lang="en" key="PASSWORD_HIDVOL_HOST_TITLE">Outer Volume Password</string> @@ -581,16 +581,16 @@ <string lang="en" key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</string> <string lang="en" key="PASSWORD_LENGTH_WARNING">WARNING: Short passwords are easy to crack using brute force techniques!\n\nWe recommend choosing a password consisting of more than 20 characters. Are you sure you want to use a short password?</string> <string lang="en" key="PASSWORD_TITLE">Volume Password</string> - <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a TrueCrypt volume.</string> - <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no TrueCrypt volume found.</string> - <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no TrueCrypt volume found.</string> + <string lang="en" key="PASSWORD_WRONG">Incorrect password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a RealCrypt volume.</string> + <string lang="en" key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no RealCrypt volume found.</string> + <string lang="en" key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no RealCrypt volume found.</string> <string lang="en" key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nWarning: Caps Lock is on. This may cause you to enter your password incorrectly.</string> <string lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</string> <string lang="en" key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</string> - <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">TrueCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> + <string lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">RealCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</string> <string lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</string> <string lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</string> <string lang="en" key="PREV">< &Back</string> @@ -619,9 +619,9 @@ <string lang="en" key="TEST_PLAINTEXT_SIZE">The test plaintext you have supplied is too long or short.</string> <string lang="en" key="TWO_LAYER_CASCADE_HELP">Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key) and then with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> <string lang="en" key="THREE_LAYER_CASCADE_HELP">Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with %hs (%d-bit key), then with %hs (%d-bit key), and finally with %hs (%d-bit key). Each cipher uses its own key. All keys are mutually independent.</string> - <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in TrueCrypt (it is a limitation of Windows).</string> - <string lang="en" key="TRAVELER_DISK_CREATED">TrueCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run TrueCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that TrueCrypt was run on a Windows system even if it is run in portable mode.</string> - <string lang="en" key="TC_TRAVELER_DISK">TrueCrypt Traveler Disk</string> + <string lang="en" key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in RealCrypt (it is a limitation of Windows).</string> + <string lang="en" key="TRAVELER_DISK_CREATED">RealCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run RealCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that RealCrypt was run on a Windows system even if it is run in portable mode.</string> + <string lang="en" key="TC_TRAVELER_DISK">RealCrypt Traveler Disk</string> <string lang="en" key="TWOFISH_HELP">Designed by Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall, and Niels Ferguson. Published in 1998. 256-bit key, 128-bit block. Mode of operation is XTS. Twofish was one of the AES finalists.</string> <string lang="en" key="MORE_INFO_ABOUT">More information on %hs</string> <string lang="en" key="UNKNOWN">Unknown</string> @@ -637,10 +637,10 @@ <string lang="en" key="VOL_SIZE_WRONG">Error: Incorrect volume size.</string> <string lang="en" key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Format?</string> <string lang="en" key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, sparse-file-hosted volumes cannot provide plausible deniability (host a hidden volume). Also note that if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</string> - <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by TrueCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in TrueCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> + <string lang="en" key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by RealCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in RealCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</string> <string lang="en" key="PASSWORD_CACHE_WIPED_SHORT">Password cache wiped</string> - <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the TrueCrypt driver cache have been wiped.</string> - <string lang="en" key="WRONG_VOL_TYPE">TrueCrypt cannot change the password for a foreign volume.</string> + <string lang="en" key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the RealCrypt driver cache have been wiped.</string> + <string lang="en" key="WRONG_VOL_TYPE">RealCrypt cannot change the password for a foreign volume.</string> <string lang="en" key="SELECT_FREE_DRIVE">Please select a free drive letter from the list.</string> <string lang="en" key="SELECT_A_MOUNTED_VOLUME">Please select a mounted volume in the drive letter list.</string> <string lang="en" key="AMBIGUOUS_VOL_SELECTION">Two different mounted volumes are currently selected (one in the drive letter list and the other in the input field below the list).\n\nPlease choose the volume you wanted to select:</string> @@ -648,16 +648,16 @@ <string lang="en" key="ERR_PROCESS_KEYFILE">Error while processing keyfile!</string> <string lang="en" key="ERR_PROCESS_KEYFILE_PATH">Error processing keyfile path!</string> <string lang="en" key="ERR_KEYFILE_PATH_EMPTY">The keyfile path contains no files.\n\nPlease note that folders (and files they contain) found in keyfile search paths are ignored.</string> - <string lang="en" key="UNSUPPORTED_OS">TrueCrypt does not support this operating system.</string> - <string lang="en" key="UNSUPPORTED_BETA_OS">Error: TrueCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> + <string lang="en" key="UNSUPPORTED_OS">RealCrypt does not support this operating system.</string> + <string lang="en" key="UNSUPPORTED_BETA_OS">Error: RealCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</string> <string lang="en" key="ERR_MEM_ALLOC">Error: Cannot allocate memory.</string> <string lang="en" key="ERR_PERF_COUNTER">Error: Could not retrieve value of performance counter.</string> <string lang="en" key="ERR_VOL_FORMAT_BAD">Error: Bad volume format.</string> <string lang="en" key="ERR_HIDDEN_NOT_NORMAL_VOLUME">Error: You supplied a password for a hidden volume (not for a normal volume).</string> - <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a TrueCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> - <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">TrueCrypt - Legal Notices</string> + <string lang="en" key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a RealCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</string> + <string lang="en" key="LEGAL_NOTICES_DLG_TITLE">RealCrypt - Legal Notices</string> <string lang="en" key="ALL_FILES">All Files</string> - <string lang="en" key="TC_VOLUMES">TrueCrypt Volumes</string> + <string lang="en" key="TC_VOLUMES">RealCrypt Volumes</string> <string lang="en" key="DLL_FILES">Library Modules</string> <string lang="en" key="FORMAT_NTFS_STOP">NTFS formatting cannot continue.</string> <string lang="en" key="CANT_MOUNT_VOLUME">Cannot mount volume.</string> @@ -677,8 +677,8 @@ <string lang="en" key="CLUSTER_TOO_SMALL">The selected cluster size is too small for this volume size. A greater cluster size will be used instead.</string> <string lang="en" key="CANT_GET_VOLSIZE">Error: Cannot get volume size!\n\nMake sure the selected volume is not being used by the system or an application.</string> <string lang="en" key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes must not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume needs to be created within a non-dynamic container.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> - <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the TrueCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</string> + <string lang="en" key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the RealCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS">Note: The FAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT).</string> <string lang="en" key="HIDDEN_VOL_HOST_NTFS_ASK">Note that the FAT file system is more suitable for outer volumes than the NTFS file system. For example, the maximum possible size of the hidden volume will very likely be significantly greater if the outer volume is formatted as FAT (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume can reside only in the second half of the outer volume).\n\nAre you sure you want to format the outer volume as NTFS?</string> <string lang="en" key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</string> @@ -687,15 +687,15 @@ <string lang="en" key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</string> <string lang="en" key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</string> <string lang="en" key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</string> - <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two TrueCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> + <string lang="en" key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two RealCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</string> <string lang="en" key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</string> <string lang="en" key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</string> - <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this TrueCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> + <string lang="en" key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this RealCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</string> <string lang="en" key="CANT_ACCESS_VOL">Error: Cannot access the volume!\n\nMake sure that the selected volume exists, that it is not mounted or being used by the system or an application, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</string> <string lang="en" key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented TrueCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> - <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented TrueCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented RealCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</string> + <string lang="en" key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented RealCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="CANT_DISMOUNT_OUTER_VOL">Error: Cannot dismount the outer volume!\n\nVolume cannot be dismounted if it contains files or folders being used by a program or the system.\n\nPlease close any program that might be using files or directories on the volume and click Retry.</string> <string lang="en" key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</string> <string lang="en" key="CANT_ACCESS_OUTER_VOL">Error: Cannot access the outer volume! Volume creation cannot continue.</string> @@ -745,22 +745,22 @@ <string lang="en" key="VOLUME_HEADER_DAYS"> (%I64d days ago)</string> <string lang="en" key="VOLUME_FORMAT_VERSION">Volume Format Version</string> <string lang="en" key="BACKUP_HEADER">Embedded Backup Header</string> - <string lang="en" key="TC_BOOT_LOADER_VERSION">TrueCrypt Boot Loader Version</string> + <string lang="en" key="TC_BOOT_LOADER_VERSION">RealCrypt Boot Loader Version</string> <string lang="en" key="FIRST_AVAILABLE">First available</string> <string lang="en" key="REMOVABLE_DISK">Removable Disk</string> <string lang="en" key="HARDDISK">Harddisk</string> <string lang="en" key="UNCHANGED">Unchanged</string> <string lang="en" key="SETUP_MODE_TITLE">Wizard Mode</string> <string lang="en" key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</string> - <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install TrueCrypt on this system.</string> + <string lang="en" key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install RealCrypt on this system.</string> <string lang="en" key="SETUP_MODE_HELP_UPGRADE">Note: You can upgrade without decrypting even if the system partition/drive is encrypted or you use a hidden operating system.</string> - <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run TrueCrypt in so-called portable mode. TrueCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'TrueCrypt.exe' (then TrueCrypt will run in portable mode).</string> + <string lang="en" key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run RealCrypt in so-called portable mode. RealCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'RealCrypt.exe' (then RealCrypt will run in portable mode).</string> <string lang="en" key="SETUP_OPTIONS_TITLE">Setup Options</string> <string lang="en" key="SETUP_OPTIONS_INFO">Here you can set various options to control the installation process.</string> <string lang="en" key="SETUP_PROGRESS_TITLE">Installing</string> - <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while TrueCrypt is being installed.</string> - <string lang="en" key="SETUP_FINISHED_TITLE_DON">TrueCrypt has been successfully installed</string> - <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">TrueCrypt has been successfully upgraded</string> + <string lang="en" key="SETUP_PROGRESS_INFO">Please wait while RealCrypt is being installed.</string> + <string lang="en" key="SETUP_FINISHED_TITLE_DON">RealCrypt has been successfully installed</string> + <string lang="en" key="SETUP_FINISHED_UPGRADE_TITLE_DON">RealCrypt has been successfully upgraded</string> <string lang="en" key="SETUP_FINISHED_INFO_DON">Please consider making a donation. You can click Finish anytime to close the installer.</string> <string lang="en" key="EXTRACTION_OPTIONS_TITLE">Extraction Options</string> <string lang="en" key="EXTRACTION_OPTIONS_INFO">Here you can set various options to control the extraction process.</string> @@ -768,30 +768,30 @@ <string lang="en" key="EXTRACTION_FINISHED_TITLE_DON">Files successfully extracted</string> <string lang="en" key="EXTRACTION_FINISHED_INFO">All files have been successfully extracted to the destination location.</string> <string lang="en" key="AUTO_FOLDER_CREATION">If the specified folder does not exist, it will be automatically created.</string> - <string lang="en" key="SETUP_UPGRADE_DESTINATION">The TrueCrypt program files will be upgraded in the location where TrueCrypt is installed. If you need to select a different location, please uninstall TrueCrypt first.</string> - <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of TrueCrypt?</string> - <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used TrueCrypt before, we recommend that you read the chapter Beginner's Tutorial in the TrueCrypt User Guide. Do you want to view the tutorial?</string> + <string lang="en" key="SETUP_UPGRADE_DESTINATION">The RealCrypt program files will be upgraded in the location where RealCrypt is installed. If you need to select a different location, please uninstall RealCrypt first.</string> + <string lang="en" key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of RealCrypt?</string> + <string lang="en" key="AFTER_INSTALL_TUTORIAL">If you have never used RealCrypt before, we recommend that you read the chapter Beginner's Tutorial in the RealCrypt User Guide. Do you want to view the tutorial?</string> <string lang="en" key="SELECT_AN_ACTION">Please select an action to perform from the following:</string> <string lang="en" key="REPAIR_REINSTALL">Repair/Reinstall</string> <string lang="en" key="UPGRADE">Upgrade</string> <string lang="en" key="UNINSTALL">Uninstall</string> - <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall TrueCrypt, you must have administrator privileges. Do you want to continue?</string> - <string lang="en" key="TC_INSTALLER_IS_RUNNING">TrueCrypt Installer is currently running on this system and performing or preparing installation or update of TrueCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SETUP_ADMIN">To successfully install/uninstall RealCrypt, you must have administrator privileges. Do you want to continue?</string> + <string lang="en" key="TC_INSTALLER_IS_RUNNING">RealCrypt Installer is currently running on this system and performing or preparing installation or update of RealCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="INSTALL_FAILED">Installation failed.</string> <string lang="en" key="UNINSTALL_FAILED">Uninstallation failed.</string> - <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official TrueCrypt website at www.truecrypt.org).</string> + <string lang="en" key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official RealCrypt website at www.realcrypt.org).</string> <string lang="en" key="CANNOT_WRITE_FILE_X">Cannot write file %hs</string> <string lang="en" key="EXTRACTING_VERB">Extracting</string> <string lang="en" key="CANNOT_READ_FROM_PACKAGE">Cannot read data from the package.</string> <string lang="en" key="CANT_VERIFY_PACKAGE_INTEGRITY">Cannot verify the integrity of this distribution package.</string> <string lang="en" key="EXTRACTION_FAILED">Extraction failed.</string> <string lang="en" key="ROLLBACK">The installation has been rolled back.</string> - <string lang="en" key="INSTALL_OK">TrueCrypt has been successfully installed.</string> - <string lang="en" key="SETUP_UPDATE_OK">TrueCrypt has been successfully updated.</string> - <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">TrueCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> - <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade TrueCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'TrueCrypt installation'. If System Restore is not available, you should try installing the original or the new version of TrueCrypt again before you shut down or restart the system.</string> - <string lang="en" key="UNINSTALL_OK">TrueCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the TrueCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the TrueCrypt installer or created by TrueCrypt.</string> - <string lang="en" key="REMOVING_REG">Removing TrueCrypt registry entries</string> + <string lang="en" key="INSTALL_OK">RealCrypt has been successfully installed.</string> + <string lang="en" key="SETUP_UPDATE_OK">RealCrypt has been successfully updated.</string> + <string lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">RealCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</string> + <string lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade RealCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'RealCrypt installation'. If System Restore is not available, you should try installing the original or the new version of RealCrypt again before you shut down or restart the system.</string> + <string lang="en" key="UNINSTALL_OK">RealCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the RealCrypt installer and the folder %hs. Note that the folder will not be removed if it contains any files that were not installed by the RealCrypt installer or created by RealCrypt.</string> + <string lang="en" key="REMOVING_REG">Removing RealCrypt registry entries</string> <string lang="en" key="ADDING_REG">Adding registry entry</string> <string lang="en" key="REMOVING_APPDATA">Removing application-specific data</string> <string lang="en" key="INSTALLING">Installing</string> @@ -805,20 +805,20 @@ <string lang="en" key="UNINSTALL_OF_FAILED">Failed to uninstall '%hs'. %hs\nDo you want to continue uninstalling?</string> <string lang="en" key="INSTALL_COMPLETED">Installation completed.</string> <string lang="en" key="CANT_CREATE_FOLDER">The folder '%hs' could not be created</string> - <string lang="en" key="CLOSE_TC_FIRST">The TrueCrypt device driver cannot be unloaded.\n\nPlease close all open TrueCrypt windows first. If it does not help, please restart Windows and then try again.</string> - <string lang="en" key="DISMOUNT_ALL_FIRST">All TrueCrypt volumes must be dismounted before installing or uninstalling TrueCrypt.</string> - <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of TrueCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of TrueCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall TrueCrypt. After you uninstall the old version of TrueCrypt, run the installer of the new version of TrueCrypt again.</string> + <string lang="en" key="CLOSE_TC_FIRST">The RealCrypt device driver cannot be unloaded.\n\nPlease close all open RealCrypt windows first. If it does not help, please restart Windows and then try again.</string> + <string lang="en" key="DISMOUNT_ALL_FIRST">All RealCrypt volumes must be dismounted before installing or uninstalling RealCrypt.</string> + <string lang="en" key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of RealCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of RealCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall RealCrypt. After you uninstall the old version of RealCrypt, run the installer of the new version of RealCrypt again.</string> <string lang="en" key="REG_INSTALL_FAILED">The installation of the registry entries has failed</string> - <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing TrueCrypt again.</string> - <string lang="en" key="STARTING_DRIVER">Starting TrueCrypt device driver</string> + <string lang="en" key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing RealCrypt again.</string> + <string lang="en" key="STARTING_DRIVER">Starting RealCrypt device driver</string> <string lang="en" key="DRIVER_UINSTALL_FAILED">Uninstallation of the device driver has failed. Please note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be uninstalled (or reinstalled).</string> - <string lang="en" key="INSTALLING_DRIVER">Installing TrueCrypt device driver</string> - <string lang="en" key="STOPPING_DRIVER">Stopping TrueCrypt device driver</string> - <string lang="en" key="REMOVING_DRIVER">Uninstalling TrueCrypt device driver</string> + <string lang="en" key="INSTALLING_DRIVER">Installing RealCrypt device driver</string> + <string lang="en" key="STOPPING_DRIVER">Stopping RealCrypt device driver</string> + <string lang="en" key="REMOVING_DRIVER">Uninstalling RealCrypt device driver</string> <string lang="en" key="COM_REG_FAILED">Registration of the User Account Control support library failed.</string> <string lang="en" key="COM_DEREG_FAILED">Unregistration of the User Account Control support library failed.</string> - <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the TrueCrypt driver is not (and cannot be) fully portable (whereas the TrueCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that TrueCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> - <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run TrueCrypt in portable mode (as opposed to running an installed copy of TrueCrypt), the system will ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run TrueCrypt in portable mode, TrueCrypt needs to load and start the TrueCrypt device driver. TrueCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run TrueCrypt with administrator privileges (UAC prompt).\n\nNote that if you install TrueCrypt on the system (as opposed to running TrueCrypt in portable mode), the system will NOT ask you for permission to run TrueCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> + <string lang="en" key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the RealCrypt driver is not (and cannot be) fully portable (whereas the RealCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that RealCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</string> + <string lang="en" key="TRAVELER_UAC_NOTE">Note that if you decide to run RealCrypt in portable mode (as opposed to running an installed copy of RealCrypt), the system will ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run RealCrypt in portable mode, RealCrypt needs to load and start the RealCrypt device driver. RealCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run RealCrypt with administrator privileges (UAC prompt).\n\nNote that if you install RealCrypt on the system (as opposed to running RealCrypt in portable mode), the system will NOT ask you for permission to run RealCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</string> <string lang="en" key="CONTAINER_ADMIN_WARNING">Warning: This instance of the Volume Creation Wizard has administrator privileges.\n\nYour new volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of the Volume Creation Wizard and launch a new one without administrator privileges.\n\nDo you want to close this instance of the Volume Creation Wizard?</string> <string lang="en" key="CANNOT_DISPLAY_LICENSE">Error: Cannot display license.</string> <string lang="en" key="OUTER_VOL_WRITE_PREVENTED">Outer(!)</string> @@ -828,8 +828,8 @@ <string lang="en" key="SECONDS">s</string> <string lang="en" key="OPEN">Open</string> <string lang="en" key="DISMOUNT">Dismount</string> - <string lang="en" key="SHOW_TC">Show TrueCrypt</string> - <string lang="en" key="HIDE_TC">Hide TrueCrypt</string> + <string lang="en" key="SHOW_TC">Show RealCrypt</string> + <string lang="en" key="HIDE_TC">Hide RealCrypt</string> <string lang="en" key="TOTAL_DATA_READ">Data Read since Mount</string> <string lang="en" key="TOTAL_DATA_WRITTEN">Data Written since Mount</string> <string lang="en" key="ENCRYPTED_PORTION">Encrypted Portion</string> @@ -848,14 +848,14 @@ <string lang="en" key="PROGRESS_STATUS_ERROR">Error</string> <string lang="en" key="FAVORITE_DISCONNECTED_DEV">Device disconnected</string> <string lang="en" key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</string> - <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, TrueCrypt will be unable to mount this favorite volume if the device number changes.</string> - <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nTrueCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> - <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">TrueCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or TrueCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the TrueCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'TrueCrypt Background Task'.</string> + <string lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, RealCrypt will be unable to mount this favorite volume if the device number changes.</string> + <string lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nRealCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</string> + <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">RealCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or RealCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the RealCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'RealCrypt Background Task'.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</string> <string lang="en" key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</string> - <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable TrueCrypt to assign a label to the partition.</string> + <string lang="en" key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable RealCrypt to assign a label to the partition.</string> <string lang="en" key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</string> <string lang="en" key="ENTER_PASSWORD_FOR">Enter password for %hs</string> <string lang="en" key="ENTER_PASSWORD_FOR_LABEL">Enter password for '%s'</string> @@ -863,11 +863,11 @@ <string lang="en" key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</string> <string lang="en" key="ENTER_HEADER_BACKUP_PASSWORD">Enter password for the header stored in backup file</string> <string lang="en" key="KEYFILE_CREATED">Keyfile has been successfully created.</string> - <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! TrueCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> + <string lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! RealCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</string> <string lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</string> <string lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</string> <string lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</string> - <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that TrueCrypt determines the type through the process of trial and error).</string> + <string lang="en" key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %hs?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that RealCrypt determines the type through the process of trial and error).</string> <string lang="en" key="CONFIRM_VOL_HEADER_RESTORE">Are you sure you want to restore volume header of %hs?\n\nWARNING: Restoring a volume header also restores the volume password that was valid when the backup was created. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) will be necessary to mount the volume again after the volume header is restored.\n\nAfter you click Yes, you will select the header backup file.</string> <string lang="en" key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</string> <string lang="en" key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</string> @@ -876,20 +876,20 @@ <string lang="en" key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</string> <string lang="en" key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</string> <string lang="en" key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</string> - <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</string> - <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual TrueCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the TrueCrypt Rescue Disk.\n\nDo you want to create a TrueCrypt Rescue Disk?</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new TrueCrypt Rescue Disk ISO image and the location where you wish to place it.</string> + <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by RealCrypt 6.0 or later contain embedded backup headers).</string> + <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual RealCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the RealCrypt Rescue Disk.\n\nDo you want to create a RealCrypt Rescue Disk?</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new RealCrypt Rescue Disk ISO image and the location where you wish to place it.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your TrueCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The TrueCrypt Rescue Disk has been successfully verified.</string> - <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating TrueCrypt Rescue Disk.</string> - <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">TrueCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a TrueCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a TrueCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your RealCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The RealCrypt Rescue Disk has been successfully verified.</string> + <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a RealCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating RealCrypt Rescue Disk.</string> + <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">RealCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a RealCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a RealCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string> <string lang="en" key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</string> - <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">TrueCrypt - System Favorite Volumes</string> + <string lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">RealCrypt - System Favorite Volumes</string> <string lang="en" key="SYS_FAVORITES_HELP_LINK">What are system favorite volumes?</string> <string lang="en" key="SYS_FAVORITES_REQUIRE_PBA">The system partition/drive does not appear to be encrypted.\n\nSystem favorite volumes can be mounted using only a pre-boot authentication password. Therefore, to enable use of system favorite volumes, you need to encrypt the system partition/drive first.</string> <string lang="en" key="DISMOUNT_FIRST">Please dismount the volume before proceeding.</string> @@ -916,14 +916,14 @@ <string lang="en" key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (e.g., to '.tc').\n\nAre you sure you want to use the problematic file extension?</string> <string lang="en" key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or some other file extension that is similarly problematic. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (e.g., to '.tc') after you dismount the volume.</string> <string lang="en" key="HOMEPAGE">Homepage</string> - <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.</string> - <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in TrueCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> - <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a TrueCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of TrueCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted TrueCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> - <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted TrueCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted TrueCrypt volume larger than 2048 GB under Windows XP.</string> + <string lang="en" key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.</string> + <string lang="en" key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in RealCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</string> + <string lang="en" key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a RealCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of RealCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted RealCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</string> + <string lang="en" key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted RealCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted RealCrypt volume larger than 2048 GB under Windows XP.</string> <string lang="en" key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">WARNING: If you want to be able to add more data/files to the outer volume in future, you should consider choosing a smaller size for the hidden volume.\n\nAre you sure you want to continue with the size you specified?</string> - <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a TrueCrypt volume.</string> - <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular TrueCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> + <string lang="en" key="NO_VOLUME_SELECTED">No volume selected.\n\nClick 'Select Device' or 'Select File' to select a RealCrypt volume.</string> + <string lang="en" key="NO_SYSENC_PARTITION_SELECTED">No partition selected.\n\nClick 'Select Device' to select a dismounted partition that normally requires pre-boot authentication (for example, a partition located on the encrypted system drive of another operating system, which is not running, or the encrypted system partition of another operating system).\n\nNote: The selected partition will be mounted as a regular RealCrypt volume without pre-boot authentication. This is useful e.g. for backup or repair operations.</string> <string lang="en" key="CONFIRM_SAVE_DEFAULT_KEYFILES">WARNING: If default keyfiles are set and enabled, volumes that are not using these keyfiles will be impossible to mount. Therefore, after you enable default keyfiles, keep in mind to uncheck the 'Use keyfiles' checkbox (below a password input field) whenever mounting such volumes.\n\nAre you sure you want to save the selected keyfiles/paths as default?</string> <string lang="en" key="HK_AUTOMOUNT_DEVICES">Auto-Mount Devices</string> <string lang="en" key="HK_DISMOUNT_ALL">Dismount All</string> @@ -932,38 +932,38 @@ <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE">Force Dismount All & Wipe Cache</string> <string lang="en" key="HK_FORCE_DISMOUNT_ALL_AND_WIPE_AND_EXIT">Force Dismount All, Wipe Cache & Exit</string> <string lang="en" key="HK_MOUNT_FAVORITE_VOLUMES">Mount Favorite Volumes</string> - <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main TrueCrypt Window</string> + <string lang="en" key="HK_SHOW_HIDE_MAIN_WINDOW">Show/Hide Main RealCrypt Window</string> <string lang="en" key="PRESS_A_KEY_TO_ASSIGN">(Click here and press a key)</string> <string lang="en" key="ACTION">Action</string> <string lang="en" key="SHORTCUT">Shortcut</string> <string lang="en" key="CANNOT_USE_RESERVED_KEY">Error: This shortcut is reserved. Please choose a different shortcut.</string> <string lang="en" key="SHORTCUT_ALREADY_IN_USE">Error: Shortcut already in use.</string> - <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more TrueCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as TrueCrypt.</string> - <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system TrueCrypt volumes (including system favorite volumes). TrueCrypt supports creation of paging files only on an encrypted system partition/drive.</string> - <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents TrueCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. TrueCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> - <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nTrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> - <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">TrueCrypt volume mounted as %c: has been dismounted.</string> - <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">TrueCrypt volumes have been dismounted.</string> - <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">TrueCrypt volumes have been dismounted and password cache has been wiped.</string> + <string lang="en" key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more RealCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as RealCrypt.</string> + <string lang="en" key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system RealCrypt volumes (including system favorite volumes). RealCrypt supports creation of paging files only on an encrypted system partition/drive.</string> + <string lang="en" key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents RealCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. RealCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</string> + <string lang="en" key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nRealCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</string> + <string lang="en" key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">RealCrypt volume mounted as %c: has been dismounted.</string> + <string lang="en" key="MOUNTED_VOLUMES_DISMOUNTED">RealCrypt volumes have been dismounted.</string> + <string lang="en" key="VOLUMES_DISMOUNTED_CACHE_WIPED">RealCrypt volumes have been dismounted and password cache has been wiped.</string> <string lang="en" key="SUCCESSFULLY_DISMOUNTED">Successfully dismounted</string> - <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the TrueCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the TrueCrypt Background Task?</string> + <string lang="en" key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the RealCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the RealCrypt Background Task?</string> <string lang="en" key="CONFIRM_NO_FORCED_AUTODISMOUNT">WARNING: If this option is disabled, volumes containing open files/directories will not be possible to auto-dismount.\n\nAre you sure you want to disable this option?</string> <string lang="en" key="WARN_PREF_AUTO_DISMOUNT">WARNING: Volumes containing open files/directories will NOT be auto-dismounted.\n\nTo prevent this, enable the following option in this dialog window: 'Force auto-dismount even if volume contains open files or directories'</string> - <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, TrueCrypt may fail to auto-dismount volumes in such cases.</string> + <string lang="en" key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, RealCrypt may fail to auto-dismount volumes in such cases.</string> <string lang="en" key="NONSYS_INPLACE_ENC_RESUME_PROMPT">You have scheduled the process of encryption of a partition/volume. The process has not been completed yet.\n\nDo you want to resume the process now?</string> <string lang="en" key="SYSTEM_ENCRYPTION_RESUME_PROMPT">You have scheduled the process of encryption or decryption of the system partition/drive. The process has not been completed yet.\n\nDo you want to start (resume) the process now?</string> <string lang="en" key="ASK_NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL">Do you want to be prompted about whether you want to resume the currently scheduled processes of encryption of non-system partitions/volumes?</string> <string lang="en" key="KEEP_PROMPTING_ME">Yes, keep prompting me</string> <string lang="en" key="DO_NOT_PROMPT_ME">No, do not prompt me</string> - <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="CONFIRM_EXIT">WARNING: If TrueCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish TrueCrypt to run in the background, disable the TrueCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of TrueCrypt in the Preferences).\n\nAre you sure you want TrueCrypt to exit?</string> + <string lang="en" key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="CONFIRM_EXIT">WARNING: If RealCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish RealCrypt to run in the background, disable the RealCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of RealCrypt in the Preferences).\n\nAre you sure you want RealCrypt to exit?</string> <string lang="en" key="CONFIRM_EXIT_UNIVERSAL">Exit?</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> - <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">TrueCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> - <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> - <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.</string> + <string lang="en" key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">RealCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</string> + <string lang="en" key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</string> + <string lang="en" key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</string> <string lang="en" key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">Error: Failed to interrupt the process of encryption/decryption of the system partition/drive.</string> <string lang="en" key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</string> <string lang="en" key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</string> @@ -971,71 +971,71 @@ <string lang="en" key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</string> <string lang="en" key="NOTHING_TO_RESUME">There is no process/task to resume.</string> - <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: TrueCrypt Background Task is disabled. After you exit TrueCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nEnable TrueCrypt Background Task?</string> + <string lang="en" key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: RealCrypt Background Task is disabled. After you exit RealCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nEnable RealCrypt Background Task?</string> <string lang="en" key="LANG_PACK_VERSION">Language pack version: %s</string> - <string lang="en" key="CHECKING_FS">Checking the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the TrueCrypt volume mounted as %hs...</string> - <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since TrueCrypt 4.1.\n\nWe strongly recommend that you move data from this TrueCrypt volume to a new volume created by this version of TrueCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with TrueCrypt 4.1 or later.</string> - <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of TrueCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new TrueCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> - <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted TrueCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> + <string lang="en" key="CHECKING_FS">Checking the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="REPAIRING_FS">Attempting to repair the file system on the RealCrypt volume mounted as %hs...</string> + <string lang="en" key="WARN_CBC_MODE">Warning: This volume is encrypted in CBC mode. Due to security issues, CBC mode has been deprecated since RealCrypt 4.1.\n\nWe strongly recommend that you move data from this RealCrypt volume to a new volume created by this version of RealCrypt. After you do so, you should securely erase or destroy the old volume. For more information, please see the Version History in the documentation or the release notices distributed with RealCrypt 4.1 or later.</string> + <string lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of RealCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new RealCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</string> + <string lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted RealCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</string> <string lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</string> - <string lang="en" key="MOUNT_TC_VOLUME">Mount TrueCrypt volume</string> - <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all TrueCrypt volumes</string> - <string lang="en" key="UAC_INIT_ERROR">TrueCrypt failed to obtain Administrator privileges.</string> + <string lang="en" key="MOUNT_TC_VOLUME">Mount RealCrypt volume</string> + <string lang="en" key="DISMOUNT_ALL_TC_VOLUMES">Dismount all RealCrypt volumes</string> + <string lang="en" key="UAC_INIT_ERROR">RealCrypt failed to obtain Administrator privileges.</string> <string lang="en" key="ERR_ACCESS_DENIED">Access was denied by the operating system.\n\nPossible cause: The operating system requires that you have read/write permission (or administrator privileges) for certain folders, files, and devices, in order for you to be allowed to read and write data to/from them. Normally, a user without administrator privileges is allowed to create, read and modify files in his or her Documents folder.</string> <string lang="en" key="SECTOR_SIZE_UNSUPPORTED">Error: The drive uses an unsupported sector size.\n\nIt is currently not possible to create partition/device-hosted volumes on drives that use sectors larger than 4096 bytes. However, note that you can create file-hosted volumes (containers) on such drives.</string> <string lang="en" key="SYSENC_UNSUPPORTED_SECTOR_SIZE_BIOS">It is currently not possible to encrypt a system installed on a disk that uses a sector size other than 512 bytes.</string> - <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The TrueCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the TrueCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in TrueCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> + <string lang="en" key="NO_SPACE_FOR_BOOT_LOADER">The RealCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the RealCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in RealCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</string> <string lang="en" key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">The feature is not supported on the version of the operating system you are currently using.</string> - <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">TrueCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> + <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">RealCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</string> <string lang="en" key="SYS_ENCRYPTION_UNSUPPORTED_ON_VISTA_SP0">Before you can encrypt the system partition/drive on Windows Vista, you need to install Service Pack 1 or higher for Windows Vista (no such Service Pack has been installed on this system yet).\n\nNote: Service Pack 1 for Windows Vista resolved an issue causing a shortage of free base memory during system boot.</string> - <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">TrueCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading TrueCrypt, please install Service Pack 1 or higher for Windows Vista.</string> - <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires TrueCrypt to be installed on the system (you are running TrueCrypt in portable mode).\n\nPlease install TrueCrypt and then try again.</string> + <string lang="en" key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">RealCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading RealCrypt, please install Service Pack 1 or higher for Windows Vista.</string> + <string lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires RealCrypt to be installed on the system (you are running RealCrypt in portable mode).\n\nPlease install RealCrypt and then try again.</string> <string lang="en" key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</string> <string lang="en" key="GPT_BOOT_DRIVE_UNSUPPORTED">Your system drive has a GUID partition table (GPT). Currently, only drives with a MBR partition table are supported.</string> - <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The TrueCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> - <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your TrueCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the TrueCrypt Boot Loader with the Windows system loader.</string> + <string lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The RealCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</string> + <string lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your RealCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the RealCrypt Boot Loader with the Windows system loader.</string> <string lang="en" key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</string> <string lang="en" key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</string> - <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the TrueCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use TrueCrypt. The above options allow you to do that by customizing the TrueCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the TrueCrypt boot loader.</string> - <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the TrueCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> + <string lang="en" key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the RealCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use RealCrypt. The above options allow you to do that by customizing the RealCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the RealCrypt boot loader.</string> + <string lang="en" key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the RealCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</string> <string lang="en" key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">Your system partition/drive appears to be fully encrypted.</string> - <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">TrueCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).</string> - <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> + <string lang="en" key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">RealCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).</string> + <string lang="en" key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</string> <string lang="en" key="SYSDRIVE_NON_STANDARD_PARTITIONS">Your system drive contains a non-standard partition.\n\nIf you are using a notebook, your system drive probably contains a special recovery partition. After the whole system drive is encrypted (including any recovery partition), your system might become unbootable if your computer is using an inappropriately designed BIOS. It would also be impossible to use any recovery partition until the system drive is decrypted. Therefore, we recommend that you encrypt only the system partition.</string> - <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted TrueCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> + <string lang="en" key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Do you want to encrypt the system partition instead of the entire drive?\n\nNote that you can create partition-hosted RealCrypt volumes within any non-system partitions on the drive (in addition to encrypting the system partition).</string> <string lang="en" key="WHOLE_SYC_DEVICE_RECOM">As your system drive contains only a single partition that occupies the whole drive, it is preferable (more secure) to encrypt the entire drive including the free "slack" space that typically surrounds such a partition.\n\nDo you want to encrypt the entire system drive?</string> <string lang="en" key="TEMP_NOT_ON_SYS_PARTITION">Your system is configured to store temporary files on a non-system partition.\n\nTemporary files may be stored only on the system partition.</string> <string lang="en" key="USER_PROFILE_NOT_ON_SYS_PARTITION">Your user profile files are not stored on the system partition.\n\nUser profile files may be stored only on the system partition.</string> <string lang="en" key="PAGING_FILE_NOT_ON_SYS_PARTITION">There is/are paging file(s) on non-system partitions.\n\nPaging files may be located only on the system partition.</string> - <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start TrueCrypt and try creating the hidden OS again.</string> - <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by TrueCrypt during the process of creation of the hidden operating system.</string> + <string lang="en" key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start RealCrypt and try creating the hidden OS again.</string> + <string lang="en" key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by RealCrypt during the process of creation of the hidden operating system.</string> <string lang="en" key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</string> - <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> - <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. TrueCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, TrueCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> + <string lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</string> + <string lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. RealCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, RealCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</string> <string lang="en" key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents i t prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</string> <string lang="en" key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</string> <string lang="en" key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</string> <string lang="en" key="KEYFILES_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">Keyfiles are currently not supported for system encryption.</string> - <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: TrueCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> - <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for TrueCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> - <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As TrueCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> - <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">TrueCrypt prevented change of keyboard layout.</string> - <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. TrueCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> - <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a TrueCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the TrueCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe TrueCrypt Rescue Disk ISO image will be created in the location specified below.</string> - <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the TrueCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the TrueCrypt Volume Creation Wizard and follow its instructions.</string> + <string lang="en" key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: RealCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</string> + <string lang="en" key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for RealCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</string> + <string lang="en" key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As RealCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</string> + <string lang="en" key="KEYB_LAYOUT_CHANGE_PREVENTED">RealCrypt prevented change of keyboard layout.</string> + <string lang="en" key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Note: The password will need to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout. However, it is important to note that you do NOT need a real US keyboard. RealCrypt automatically ensures that you can safely type the password (right now and in the pre-boot environment) even if you do NOT have a real US keyboard.</string> + <string lang="en" key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a RealCrypt Rescue Disk (TRD), which serves the following purposes:\n\n- If the RealCrypt Boot Loader, master key, or other critical data gets damaged, the TRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the TRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The TRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe RealCrypt Rescue Disk ISO image will be created in the location specified below.</string> + <string lang="en" key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the RealCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the RealCrypt Volume Creation Wizard and follow its instructions.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you need to burn it to a CD or DVD.\n\n%lsAfter you burn the Rescue Disk, click Next to verify that it has been correctly burned.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%hs\n\nNow you should either burn the image to a CD/DVD or move it to a safe location for later use.\n\n%lsClick Next to continue.</string> <string lang="en" key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</string> <string lang="en" key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</string> - <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a TrueCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new TrueCrypt Rescue Disk for it even if you use the same password.</string> + <string lang="en" key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a RealCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new RealCrypt Rescue Disk for it even if you use the same password.</string> <string lang="en" key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">Error: Cannot save system encryption settings.</string> <string lang="en" key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">Cannot initiate the system encryption pretest.</string> <string lang="en" key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</string> <string lang="en" key="WIPE_MODE_TITLE">Wipe Mode</string> - <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when TrueCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> + <string lang="en" key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when RealCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data be ing written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</string> <string lang="en" key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</string> <string lang="en" key="DEVICE_WIPE_PAGE_TITLE">Wiping</string> <string lang="en" key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</string> @@ -1051,131 +1051,131 @@ <string lang="en" key="WIPE_MODE_35_GUTMANN">35-pass ("Gutmann")</string> <string lang="en" key="SYS_MULTI_BOOT_MODE_TITLE">Number of Operating Systems</string> <string lang="en" key="MULTI_BOOT_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to encrypt Windows in multi-boot configurations.\n\nContinue?</string> - <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, TrueCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> - <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">TrueCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> + <string lang="en" key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, RealCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</string> + <string lang="en" key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">RealCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_TITLE">Boot Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">Is the currently running operating system installed on the boot drive?\n\nNote: Sometimes, Windows is not installed on the same drive as the Windows boot loader (boot partition). If that is the case, select 'No'.</string> - <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">TrueCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> + <string lang="en" key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">RealCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_TITLE">Number of System Drives</string> <string lang="en" key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">How many drives contain an operating system?\n\nNote: For example, if you have any operating system (e.g. Windows, Mac OS X, Linux, etc.) installed on your primary drive and any additional operating system installed on your secondary drive, select '2 or more'.</string> - <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">TrueCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> + <string lang="en" key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">RealCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">Multiple Systems on Single Drive</string> <string lang="en" key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">Are there any other operating systems installed on the drive on which the currently running operating system is installed?\n\nNote: For example, if the currently running operating system is installed on the drive #0, which contains several partitions, and if one of the partitions contains Windows and another partition contains any additional operating system (e.g. Windows, Mac OS X, Linux, etc.), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_TITLE">Non-Windows Boot Loader</string> <string lang="en" key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</string> <string lang="en" key="SYSENC_MULTI_BOOT_OUTCOME_TITLE">Multi-Boot</string> - <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">TrueCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the TrueCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the TrueCrypt Boot Loader screen) and thus you will be able boot Linux.</string> - <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the TrueCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> + <string lang="en" key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">RealCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the RealCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the RealCrypt Boot Loader screen) and thus you will be able boot Linux.</string> + <string lang="en" key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the RealCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</string> <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</string> - <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want TrueCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> + <string lang="en" key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want RealCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</string> <string lang="en" key="SYSENC_TYPE_PAGE_TITLE">Type of System Encryption</string> <string lang="en" key="SYSENC_NORMAL_TYPE_HELP">Select this option if you merely want to encrypt the system partition or the entire system drive.</string> <string lang="en" key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password to the hidden operating system. For a detailed explanation, please click the link below.</string> <string lang="en" key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</string> <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_TITLE">Hidden Operating System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two TrueCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). TrueCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">In the following steps, you will create two RealCrypt volumes (outer and hidden) within the first partition behind the system partition. The hidden volume will contain the hidden operating system (OS). RealCrypt will create the hidden OS by copying the content of the system partition (where the currently running OS is installed) to the hidden volume. To the outer volume, you will copy some sensitive looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the hidden OS partition. You can reveal the password for the outer volume within the hidden OS partition (the existence of the hidden OS remains secret).\n\nFinally, on the system partition of the currently running OS, you will install a new OS, so-called decoy OS, and encrypt it. It must not contain sensitive data and will be there for anyone forcing you to reveal your pre-boot authentication password. In total, there will be three passwords. Two of them can be disclosed (for the decoy OS and outer volume). If you use the third one, the hidden OS will start.</string> <string lang="en" key="SYSENC_DRIVE_ANALYSIS_TITLE">Detecting Hidden Sectors</string> - <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while TrueCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start TrueCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while RealCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start RealCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SYS_ENCRYPTION_SPAN_TITLE">Area to Encrypt</string> - <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the TrueCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> + <string lang="en" key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the RealCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</string> <string lang="en" key="COLLECTING_RANDOM_DATA_TITLE">Collecting Random Data</string> <string lang="en" key="KEYS_GEN_TITLE">Keys Generated</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT">TrueCrypt has found no CD/DVD burner connected to your computer. TrueCrypt needs a CD/DVD burner to burn a bootable TrueCrypt Rescue Disk containing a backup of the encryption keys, TrueCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the TrueCrypt Rescue Disk.</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT">RealCrypt has found no CD/DVD burner connected to your computer. RealCrypt needs a CD/DVD burner to burn a bootable RealCrypt Rescue Disk containing a backup of the encryption keys, RealCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the RealCrypt Rescue Disk.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO">I have no CD/DVD burner but I will store the Rescue Disk ISO image on a removable drive (e.g. USB flash drive).</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_CONNECT_LATER">I will connect a CD/DVD burner to my computer later. Terminate the process now.</string> <string lang="en" key="CD_BURNER_NOT_PRESENT_CONNECTED_NOW">A CD/DVD burner is connected to my computer now. Continue and write the Rescue Disk.</string> - <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the TrueCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the TrueCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the TrueCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable TrueCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the TrueCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> + <string lang="en" key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the RealCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the RealCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the RealCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable RealCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the RealCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</string> <string lang="en" key="RESCUE_DISK_RECORDING_TITLE">Rescue Disk Recording</string> <string lang="en" key="RESCUE_DISK_CREATED_TITLE">Rescue Disk Created</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_TITLE">System Encryption Pretest</string> <string lang="en" key="RESCUE_DISK_DISK_VERIFIED_TITLE">Rescue Disk Verified</string> - <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe TrueCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> - <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the TrueCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> - <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by TrueCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The TrueCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, TrueCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the TrueCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the TrueCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> + <string lang="en" key="RESCUE_DISK_VERIFIED_INFO">\nThe RealCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</string> + <string lang="en" key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the RealCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</string> + <string lang="en" key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by RealCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The RealCrypt Boot Loader user interface is completely in English.\n\nContinue?</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, RealCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the RealCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the RealCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_1">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if Windows cannot start after you restart the computer.\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but TrueCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the TrueCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and TrueCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the TrueCrypt Boot Loader screen does not appear (before Windows starts), insert the TrueCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the TrueCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. In the TrueCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but RealCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the RealCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and RealCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</st ring> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the RealCrypt Boot Loader screen does not appear (before Windows starts), insert the RealCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the RealCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. In the RealCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_TITLE">Pretest Completed</string> - <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while TrueCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run TrueCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> - <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, TrueCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> + <string lang="en" key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while RealCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run RealCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</string> + <string lang="en" key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, RealCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</string> <string lang="en" key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</string> <string lang="en" key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</string> <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO_TITLE">Original System</string> - <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the TrueCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, TrueCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> - <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using TrueCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the TrueCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the TrueCrypt Boot Loader will be removed).</string> - <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the TrueCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> + <string lang="en" key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the RealCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, RealCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system wi ll be completed.</string> + <string lang="en" key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using RealCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the RealCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the RealCrypt Boot Loader will be removed).</string> + <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the RealCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</string> <string lang="en" key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use TrueCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot TrueCrypt Rescue Disk\n\nTo boot a TrueCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the TrueCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The TrueCrypt Rescue Disk screen should appear now. Note: In the TrueCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use TrueCrypt Rescue Disk (After Encrypting)\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the TrueCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the TrueCrypt Boot Loader may be damaged. The TrueCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore TrueCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but TrueCrypt says that the password is incorrect, the master key or other critical data may be damaged. The TrueCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the TrueCrypt Boot Loader is damaged, you can avoid running it by booting directly from the TrueCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the TrueCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run TrueCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular TrueCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> - <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your TrueCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use RealCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot RealCrypt Rescue Disk\n\nTo boot a RealCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the RealCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor' s technical support team for assistance). Then restart your computer. The RealCrypt Rescue Disk screen should appear now. Note: In the RealCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use RealCrypt Rescue Disk (After Encrypting)\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the RealCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the RealCrypt Boot Loader may be damaged. The RealCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore RealCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but RealCrypt says that the password is incorrect, the master key or other critical data may be damaged. The RealCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the RealCrypt Boot Loader is damaged, you can avoid running it by booting directly from the RealCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the RealCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run RealCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular RealCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, a s usual).\n\n\n</string> + <string lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your RealCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_3">1) For security reasons, shut down your computer and leave it powered off for at least several minutes (the longer, the better). This is required to clear the memory, which contains sensitive data. Then turn on the computer but do not boot the hidden system.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the TrueCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because TrueCrypt will then automatically install the TrueCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install TrueCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run TrueCrypt and select 'System' > 'Encrypt System Partition/Drive'. The TrueCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the TrueCrypt Volume Creation Wizard.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the TrueCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the RealCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because RealCrypt will then automatically install the RealCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install RealCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run RealCrypt and select 'System' > 'Encrypt System Partition/Drive'. The RealCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the RealCrypt Volume Creation Wizard.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the RealCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_8">6) Select the option 'Encrypt the Windows system partition' and then click 'Next'.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_9">7) If there are only the hidden system and the decoy system installed on the computer, select the option 'Single-boot' (if there are more than these two systems installed on the computer, select 'Multi-boot'). Then click 'Next'.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the TrueCrypt Boot Loader).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the RealCrypt Boot Loader).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_11">9) In this step, choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. of the pre-boot authentication password for the hidden operating system) will remain secret.\n\nImportant: The password you choose for the decoy system must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_12">10) Follow the remaining instructions in the wizard so as to encrypt the decoy operating system.\n\n\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_13">After Decoy System Is Created\n------------------------------------------------\n\nAfter you encrypt the decoy system, the whole process of creation of the hidden operating system will be completed and you will be able to use these three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the TrueCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the TrueCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the RealCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the RealCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</string> <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_15">The third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by TrueCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the TrueCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> - <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the TrueCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by RealCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the RealCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</string> + <string lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the RealCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</string> <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_TITLE">Operating System Cloning</string> - <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, TrueCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> + <string lang="en" key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, RealCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</string> <string lang="en" key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</string> <string lang="en" key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</string> - <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The TrueCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the TrueCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.truecrypt.org/docs/?s=troubleshooting</string> + <string lang="en" key="BOOT_PRETEST_FAILED_RETRY">The RealCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the RealCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: http://www.realcrypt.org/docs/?s=troubleshooting</string> <string lang="en" key="SYS_DRIVE_NOT_ENCRYPTED">The system partition/drive does not appear to be encrypted (neither partially nor fully).</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade TrueCrypt (but you can upgrade it or reinstall the same version).</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade RealCrypt (but you can upgrade it or reinstall the same version).</string> <string lang="en" key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">Your system partition/drive is currently being encrypted, decrypted, or otherwise modified. Please interrupt the encryption/decryption/modification process (or wait until it is complete) before proceeding.</string> - <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the TrueCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> + <string lang="en" key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">An instance of the RealCrypt Volume Creation Wizard is currently running on this system and performing or preparing encryption/decryption of the system partition/drive. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</string> <string lang="en" key="SYSTEM_ENCRYPTION_NOT_COMPLETED">The process of encryption or decryption of the system partition/drive has not been completed. Please wait until it is complete before proceeding.</string> <string lang="en" key="ERR_ENCRYPTION_NOT_COMPLETED">Error: The process of encryption of the partition/drive has not been completed. It must be completed first.</string> - <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main TrueCrypt window.</string> - <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, TrueCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main TrueCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> - <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">TrueCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main TrueCrypt window.</string> + <string lang="en" key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main RealCrypt window.</string> + <string lang="en" key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, RealCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main RealCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</string> + <string lang="en" key="CANNOT_DECRYPT_HIDDEN_OS">RealCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main RealCrypt window.</string> <string lang="en" key="ERR_PARAMETER_INCORRECT">Error: Incorrect/invalid parameter.</string> <string lang="en" key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">You have selected a partition or a device but the wizard mode you selected is suitable only for file containers.\n\nDo you want to change the wizard mode?</string> - <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a TrueCrypt file container instead?</string> + <string lang="en" key="CONFIRM_CHANGE_WIZARD_MODE_TO_FILE_CONTAINER">Do you want to create a RealCrypt file container instead?</string> <string lang="en" key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</string> <string lang="en" key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</string> - <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The TrueCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the TrueCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the TrueCrypt Rescue Disk to boot or to repair the TrueCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> + <string lang="en" key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The RealCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the RealCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the RealCrypt Rescue Disk to boot or to repair the RealCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</string> <string lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</string> - <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update TrueCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the TrueCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded TrueCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a TrueCrypt driver and TrueCrypt applications whose version numbers are different from the version number of the TrueCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> - <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system.\n\nYou should run the TrueCrypt installer (whose version number is the same as the one of the TrueCrypt Boot Loader) to update TrueCrypt on this operating system.</string> - <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the TrueCrypt Boot Loader that booted this operating system is different from the version number of the TrueCrypt driver (and of the TrueCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the TrueCrypt Rescue Disk, you should reinstall TrueCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the TrueCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The TrueCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new TrueCrypt Rescue Disk (which will contain the new version of the TrueCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> - <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the TrueCrypt Boot Loader.</string> - <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">TrueCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in TrueCrypt.</string> - <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that TrueCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, TrueCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in TrueCrypt.</string> + <string lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update RealCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the RealCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded RealCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a RealCrypt driver and RealCrypt applications whose version numbers are different from the version number of the RealCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</string> + <string lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system.\n\nYou should run the RealCrypt installer (whose version number is the same as the one of the RealCrypt Boot Loader) to update RealCrypt on this operating system.</string> + <string lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the RealCrypt Boot Loader that booted this operating system is different from the version number of the RealCrypt driver (and of the RealCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the RealCrypt Rescue Disk, you should reinstall RealCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the RealCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The RealCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new RealCrypt Rescue Disk (which will contain the new version of the RealCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</string> + <string lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the RealCrypt Boot Loader.</string> + <string lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">RealCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in RealCrypt.</string> + <string lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that RealCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, RealCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in RealCrypt.</string> <string lang="en" key="SKIP_HIDDEN_SECTOR_DETECTION">Skip detection of hidden sectors (use the size reported by the operating system)</string> <string lang="en" key="RETRY_HIDDEN_SECTOR_DETECTION">Try to detect hidden sectors again</string> - <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. TrueCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want TrueCrypt to write zeroes to unreadable sectors?</string> - <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, TrueCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want TrueCrypt to discard data in the unreadable sectors now?</string> - <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: TrueCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> + <string lang="en" key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. RealCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want RealCrypt to write zeroes to unreadable sectors?</string> + <string lang="en" key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, RealCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want RealCrypt to discard data in the unreadable sectors now?</string> + <string lang="en" key="ZEROED_BAD_SECTOR_COUNT">Note: RealCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</string> <string lang="en" key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</string> - <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow TrueCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let TrueCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> + <string lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow RealCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let RealCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</string> <string lang="en" key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</string> - <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow TrueCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> + <string lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow RealCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</string> <string lang="en" key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</string> <string lang="en" key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</string> @@ -1185,37 +1185,37 @@ <string lang="en" key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</string> <string lang="en" key="SECURITY_TOKEN_ERROR">Security token error</string> <string lang="en" key="CKR_PIN_INCORRECT">Password for security token is incorrect.</string> - <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by TrueCrypt (select 'Tools' > 'Keyfile Generator').</string> + <string lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by RealCrypt (select 'Tools' > 'Keyfile Generator').</string> <string lang="en" key="ALL_TOKEN_SESSIONS_CLOSED">All open security token sessions have been closed.</string> <string lang="en" key="SELECT_TOKEN_KEYFILES">Select Security Token Keyfiles</string> <string lang="en" key="TOKEN_SLOT_ID">Slot</string> <string lang="en" key="TOKEN_NAME">Token name</string> <string lang="en" key="TOKEN_DATA_OBJECT_LABEL">File name</string> - <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in TrueCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In TrueCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> + <string lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in RealCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In RealCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</string> <string lang="en" key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal TrueCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in TrueCrypt'. In addition, when TrueCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main TrueCrypt application window.</string> - <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and TrueCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the TrueCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the TrueCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal RealCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in RealCrypt'. In addition, when RealCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main RealCrypt application window.</string> + <string lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and RealCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the RealCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the RealCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</string> <string lang="en" key="SETTING_REQUIRES_REBOOT">Note that this setting takes effect only after the operating system is restarted.</string> <string lang="en" key="COMMAND_LINE_ERROR">Error while parsing command line.</string> <string lang="en" key="RESCUE_DISK">Rescue Disk</string> <string lang="en" key="SELECT_FILE_AND_MOUNT">Select &File and Mount...</string> <string lang="en" key="SELECT_DEVICE_AND_MOUNT">Select &Device and Mount...</string> - <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in TrueCrypt</string> + <string lang="en" key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in RealCrypt</string> <string lang="en" key="MOUNT_SYSTEM_FAVORITES_ON_BOOT">Mount system favorite volumes when Windows starts (in the initial phase of the startup procedure)</string> - <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted TrueCrypt volume resides, you should always dismount the TrueCrypt volume in TrueCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> - <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in TrueCrypt and select 'Repair Filesystem').</string> - <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the TrueCrypt volume to another, healthy, TrueCrypt volume.\n\nDo you want to repair the filesystem now?</string> - <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in TrueCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> + <string lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted RealCrypt volume resides, you should always dismount the RealCrypt volume in RealCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</string> + <string lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in RealCrypt and select 'Repair Filesystem').</string> + <string lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the RealCrypt volume to another, healthy, RealCrypt volume.\n\nDo you want to repair the filesystem now?</string> + <string lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in RealCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</string> <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</string> - <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by TrueCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> + <string lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by RealCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</string> <string lang="en" key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</string> <string lang="en" key="NUMBER_OF_THREADS">%d threads</string> <string lang="en" key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</string> <string lang="en" key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</string> - <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want TrueCrypt to attempt to disable write protection of the partition/drive?</string> + <string lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want RealCrypt to attempt to disable write protection of the partition/drive?</string> <string lang="en" key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: TrueCrypt volume auto-dismounted</string> - <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in TrueCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN_TITLE">Warning: RealCrypt volume auto-dismounted</string> + <string lang="en" key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in RealCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</string> <string lang="en" key="TEST">Test</string> <string lang="en" key="KEYFILE">Keyfile</string> <string lang="en" key="VKEY_08">Backspace</string> @@ -1287,7 +1287,7 @@ </localization>  <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema"> - <xs:element name="TrueCrypt"> + <xs:element name="RealCrypt"> <xs:complexType> <xs:sequence> <xs:element name="localization"> @@ -1338,4 +1338,4 @@ </xs:complexType> </xs:element> </xs:schema> -</TrueCrypt> +</RealCrypt> diff -Naur truecrypt-7.0a-source.orig//Common/Tcdefs.h truecrypt-7.0a-source/Common/Tcdefs.h --- truecrypt-7.0a-source.orig//Common/Tcdefs.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Common/Tcdefs.h 2010-11-23 16:19:04.000000000 +0100 @@ -12,7 +12,7 @@ #ifndef TCDEFS_H #define TCDEFS_H -#define TC_APP_NAME "TrueCrypt" +#define TC_APP_NAME "RealCrypt" // Version displayed to user #define VERSION_STRING "7.1a" @@ -247,13 +247,13 @@ #define TC_MAX_PATH 260 /* Includes the null terminator */ #endif -#define TC_STR_RELEASED_BY "Released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE +#define TC_STR_RELEASED_BY "Originally released by TrueCrypt Foundation on " TC_STR_RELEASE_DATE #define MAX_URL_LENGTH 2084 /* Internet Explorer limit. Includes the terminating null character. */ -#define TC_HOMEPAGE "http://www.truecrypt.org/" -#define TC_APPLINK "http://www.truecrypt.org/applink?version=" VERSION_STRING -#define TC_APPLINK_SECURE "https://www.truecrypt.org/applink?version=" VERSION_STRING +#define TC_HOMEPAGE "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK "http://rpmfusion.org/Package/realcrypt/" +#define TC_APPLINK_SECURE "http://rpmfusion.org/Package/realcrypt/" enum { diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp truecrypt-7.0a-source/Core/Unix/CoreService.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreService.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreService.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -357,7 +357,7 @@ string appPath = request.ApplicationExecutablePath; if (appPath.empty()) - appPath = "truecrypt"; + appPath = "realcrypt"; const char *args[] = { "sudo", "-S", "-p", "", appPath.c_str(), TC_CORE_SERVICE_CMDLINE_OPTION, nullptr }; execvp (args[0], ((char* const*) args)); diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -205,17 +205,17 @@ string CoreUnix::GetDefaultMountPointPrefix () const { - const char *envPrefix = getenv ("TRUECRYPT_MOUNT_PREFIX"); + const char *envPrefix = getenv ("REALCRYPT_MOUNT_PREFIX"); if (envPrefix && !string (envPrefix).empty()) return envPrefix; if (FilesystemPath ("/media").IsDirectory()) - return "/media/truecrypt"; + return "/media/realcrypt"; if (FilesystemPath ("/mnt").IsDirectory()) - return "/mnt/truecrypt"; + return "/mnt/realcrypt"; - return GetTempDirectory() + "/truecrypt_mnt"; + return GetTempDirectory() + "/realcrypt_mnt"; } uint32 CoreUnix::GetDeviceSectorSize (const DevicePath &devicePath) const diff -Naur truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h truecrypt-7.0a-source/Core/Unix/CoreUnix.h --- truecrypt-7.0a-source.orig//Core/Unix/CoreUnix.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/CoreUnix.h 2010-11-23 16:19:04.000000000 +0100 @@ -51,7 +51,7 @@ virtual void DismountNativeVolume (shared_ptr <VolumeInfo> mountedVolume) const { throw NotApplicable (SRC_POS); } virtual bool FilesystemSupportsUnixPermissions (const DevicePath &devicePath) const; virtual string GetDefaultMountPointPrefix () const; - virtual string GetFuseMountDirPrefix () const { return ".truecrypt_aux_mnt"; } + virtual string GetFuseMountDirPrefix () const { return ".realcrypt_aux_mnt"; } virtual MountedFilesystemList GetMountedFilesystems (const DevicePath &devicePath = DevicePath(), const DirectoryPath &mountPoint = DirectoryPath()) const = 0; virtual uid_t GetRealUserId () const; virtual gid_t GetRealGroupId () const; diff -Naur truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp --- truecrypt-7.0a-source.orig//Core/Unix/Linux/CoreLinux.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Core/Unix/Linux/CoreLinux.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -113,7 +113,7 @@ { string devPath = mountedVolume->VirtualDevice; - if (devPath.find ("/dev/mapper/truecrypt") != 0) + if (devPath.find ("/dev/mapper/realcrypt") != 0) throw NotApplicable (SRC_POS); size_t devCount = 0; @@ -368,7 +368,7 @@ } stringstream nativeDevName; - nativeDevName << "truecrypt" << options.SlotNumber; + nativeDevName << "realcrypt" << options.SlotNumber; if (nativeDevCount != cipherCount - 1) nativeDevName << "_" << cipherCount - nativeDevCount - 2; diff -Naur truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h truecrypt-7.0a-source/Driver/Fuse/FuseService.h --- truecrypt-7.0a-source.orig//Driver/Fuse/FuseService.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Driver/Fuse/FuseService.h 2010-11-23 16:19:04.000000000 +0100 @@ -43,7 +43,7 @@ static int ExceptionToErrorCode (); static const char *GetControlPath () { return "/control"; } static const char *GetVolumeImagePath (); - static string GetDeviceType () { return "truecrypt"; } + static string GetDeviceType () { return "realcrypt"; } static uid_t GetGroupId () { return GroupId; } static uid_t GetUserId () { return UserId; } static shared_ptr <Buffer> GetVolumeInfo (); diff -Naur truecrypt-7.0a-source.orig//Main/Application.h truecrypt-7.0a-source/Main/Application.h --- truecrypt-7.0a-source.orig//Main/Application.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Application.h 2010-11-23 16:19:04.000000000 +0100 @@ -24,7 +24,7 @@ static DirectoryPath GetExecutableDirectory (); static FilePath GetExecutablePath (); static int GetExitCode () { return ExitCode; } - static wstring GetName () { return L"TrueCrypt"; } + static wstring GetName () { return L"RealCrypt"; } static UserInterface *GetUserInterface () { return mUserInterface; } static UserInterfaceType::Enum GetUserInterfaceType () { return mUserInterfaceType; } static void Initialize (UserInterfaceType::Enum type); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/AboutDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/AboutDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ namespace TrueCrypt VersionStaticText->SetLabel (Application::GetName() + L" " + StringConverter::ToWide (Version::String())); CopyrightStaticText->SetLabel (StringConverter::ToWide (TC_STR_RELEASED_BY)); - WebsiteHyperlink->SetLabel (L"www.truecrypt.org"); + WebsiteHyperlink->SetLabel (L"RealCrypt is a RPM Fusion rebrand of TrueCrypt, freely available at www.truecrypt.org"); CreditsTextCtrl->SetMinSize (wxSize ( Gui->GetCharWidth (CreditsTextCtrl) * 70, @@ -61,6 +61,6 @@ namespace TrueCrypt L"This software uses wxWidgets library, which is copyright \xA9 1998-2011 Julian Smart, Robert Roebling et al.\n\n" - L"A TrueCrypt Foundation Release"); + L"A RPMfusion Release"); } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumeCreationWizard.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumeCreationWizard.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -152,7 +152,7 @@ else if (SelectedVolumeType == VolumeType::Hidden) { pageTitle = LangString["SIZE_HIDVOL_TITLE"]; - pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in TrueCrypt but a limitation of the operating system."); + pageText = LangString["SIZE_HELP_HIDDEN_VOL"] + L"\n\n" + _("Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This not a bug in RealCrypt but a limitation of the operating system."); freeSpaceText = StringFormatter (_("Maximum possible hidden volume size for this volume is {0}."), Gui->SizeToString (MaxHiddenVolumeSize)); } else diff -Naur truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp --- truecrypt-7.0a-source.orig//Main/Forms/VolumePropertiesDialog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/VolumePropertiesDialog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -69,7 +69,7 @@ AppendToList ("BACKUP_HEADER", LangString[volumeInfo.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"]); #ifdef TC_LINUX - if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volumeInfo.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif AppendToList ("TOTAL_DATA_READ", Gui->SizeToString (volumeInfo.TotalDataRead)); diff -Naur truecrypt-7.0a-source.orig//Main/GraphicUserInterface.cpp truecrypt-7.0a-source/Main/GraphicUserInterface.cpp --- truecrypt-7.1a-source.orig//Main/GraphicUserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.1a-source/Main/GraphicUserInterface.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -860,7 +860,7 @@ wxLog::FlushActive(); Application::SetExitCode (1); - Gui->ShowInfo (_("TrueCrypt is already running.")); + Gui->ShowInfo (_("RealCrypt is already running.")); return false; } @@ -983,48 +983,9 @@ wxString GraphicUserInterface::GetHomepageLinkURL (const wxString &linkId, bool secure, const wxString &extraVars) const { - wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)) + L"&dest=" + linkId; + wxString url = wxString (StringConverter::ToWide (secure ? TC_APPLINK_SECURE : TC_APPLINK)); wxString os, osVersion, architecture; -#ifdef TC_WINDOWS - - os = L"Windows"; - -#elif defined (TC_UNIX) - struct utsname unameData; - if (uname (&unameData) != -1) - { - os = StringConverter::ToWide (unameData.sysname); - osVersion = StringConverter::ToWide (unameData.release); - architecture = StringConverter::ToWide (unameData.machine); - - if (os == L"Darwin") - os = L"MacOSX"; - } - else - os = L"Unknown"; -#else - os = L"Unknown"; -#endif - - os.Replace (L" ", L"-"); - url += L"&os="; - url += os; - - osVersion.Replace (L" ", L"-"); - url += L"&osver="; - url += osVersion; - - architecture.Replace (L" ", L"-"); - url += L"&arch="; - url += architecture; - - if (!extraVars.empty()) - { - url += L"&"; - url += extraVars; - } - return url; } @@ -1050,13 +1011,13 @@ wxString docPath = wstring (Application::GetExecutableDirectory()); #ifdef TC_RESOURCE_DIR - docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/TrueCrypt User Guide.pdf"); + docPath = StringConverter::ToWide (string (TC_TO_STRING (TC_RESOURCE_DIR)) + "/doc/RealCrypt User Guide.pdf"); #elif defined (TC_WINDOWS) - docPath += L"\\TrueCrypt User Guide.pdf"; + docPath += L"\\RealCrypt User Guide.pdf"; #elif defined (TC_MACOSX) - docPath += L"/../Resources/TrueCrypt User Guide.pdf"; + docPath += L"/../Resources/RealCrypt User Guide.pdf"; #elif defined (TC_UNIX) - docPath = L"/usr/share/truecrypt/doc/TrueCrypt User Guide.pdf"; + docPath = L"/usr/share/doc/packages/realcrypt/RealCrypt User Guide.pdf"; #else # error TC_RESOURCE_DIR undefined #endif diff -Naur truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp truecrypt-7.0a-source/Main/LanguageStrings.cpp --- truecrypt-7.0a-source.orig//Main/LanguageStrings.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/LanguageStrings.cpp 2010-11-23 16:25:14.000000000 +0100 @@ -2,7 +2,7 @@ Copyright (c) 2008-2009 TrueCrypt Developers Association. All rights reserved. Governed by the TrueCrypt License 3.0 the full text of which is contained in - the file License.txt included in TrueCrypt binary and source code distribution + the file License.txt included in RealCrypt binary and source code distribution packages. */ @@ -55,31 +55,31 @@ Map["MOUNT_POINT"] = _("Mount Directory"); Map["NO"] = _("No"); Map["NO_VOLUMES_MOUNTED"] = _("No volumes mounted."); - Map["OPEN_NEW_VOLUME"] = _("Specify a New TrueCrypt Volume"); + Map["OPEN_NEW_VOLUME"] = _("Specify a New RealCrypt Volume"); Map["PARAMETER_INCORRECT"] = _("Parameter incorrrect"); Map["SELECT_KEYFILES"] = _("Select Keyfiles"); - Map["START_TC"] = _("Start TrueCrypt"); + Map["START_TC"] = _("Start RealCrypt"); Map["VOLUME_ALREADY_MOUNTED"] = _("The volume \"{0}\" is already mounted."); Map["UNKNOWN_OPTION"] = _("Unknown option"); Map["VOLUME_LOCATION"] = _("Volume Location"); Map["YES"] = _("Yes"); Map["VOLUME_HOST_IN_USE"] = _("WARNING: The host file/device \"{0}\" is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue mounting?"); Map["VIRTUAL_DEVICE"] = _("Virtual Device"); - Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the TrueCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit TrueCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the TrueCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the TrueCrypt Background Task?"); - Map["CONFIRM_EXIT"] = _("WARNING: If TrueCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish TrueCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want TrueCrypt to exit?"); - Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nTrueCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); + Map["CONFIRM_BACKGROUND_TASK_DISABLED"] = _("WARNING: If the RealCrypt Background Task is disabled, the following functions, depending on the platform, will be disabled whenever you exit RealCrypt:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: You may shut down the Background Task anytime by right-clicking the RealCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to disable the RealCrypt Background Task?"); + Map["CONFIRM_EXIT"] = _("WARNING: If RealCrypt exits now, the following functions, depending on the platform, will be disabled:\n\n1) Auto-dismount (e.g., upon logoff, time-out, etc.)\n2) Notifications (e.g., when damage to hidden volume is prevented)\n3) Tray icon\n\nNote: If you do not wish RealCrypt to continue running in background after you close its window, disable the Background Task in the Preferences.\n\nAre you sure you want RealCrypt to exit?"); + Map["DAMAGE_TO_HIDDEN_VOLUME_PREVENTED"] = _("WARNING: Data were attempted to be saved to the hidden volume area of the volume \"{0}\"!\n\nRealCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and the operating system may have reported a write error (\"Delayed Write Failed\", \"The parameter is incorrect\", etc.). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted.\n\nWe strongly recommend that you restart the operating system now."); Map["ENTER_PASSWORD"] = _("Enter password"); Map["ENTER_PASSWORD_FOR"] = _("Enter password for \"{0}\""); - Map["ENTER_TC_VOL_PASSWORD"] = _("Enter TrueCrypt Volume Password"); + Map["ENTER_TC_VOL_PASSWORD"] = _("Enter RealCrypt Volume Password"); Map["SELECT_KEYFILE_PATH"] = _("Select Keyfile Search Path"); Map["MORE_INFO_ABOUT"] = _("More information on {0}"); Map["TWO_LAYER_CASCADE_HELP"] = _("Two ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key) and then with {2} ({3}-bit key). Each cipher uses its own key. All keys are mutually independent."); Map["THREE_LAYER_CASCADE_HELP"] = _("Three ciphers in a cascade operating in XTS mode. Each block is first encrypted with {0} ({1}-bit key), then with {2} ({3}-bit key), and finally with {4} ({5}-bit key). Each cipher uses its own key. All keys are mutually independent."); - Map["CHECKING_FS"] = _("Checking the file system on the TrueCrypt volume mounted as {0}..."); - Map["REPAIRING_FS"] = _("Attempting to repair the file system on the TrueCrypt volume mounted as {0}..."); + Map["CHECKING_FS"] = _("Checking the file system on the RealCrypt volume mounted as {0}..."); + Map["REPAIRING_FS"] = _("Attempting to repair the file system on the RealCrypt volume mounted as {0}..."); Map["UNMOUNT_LOCK_FAILED"] = _("Volume \"{0}\" contains files or folders being used by applications or system.\n\nForce dismount?"); Map["VOLUME_SIZE_HELP"] = _("Please specify the size of the container to create. Note that the minimum possible size of a volume is 292 KB."); - Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by TrueCrypt 5.0 or later."); + Map["ENCRYPTION_MODE_NOT_SUPPORTED_BY_KERNEL"] = _("The volume you have mounted uses a mode of operation that is not supported by the Linux kernel. You may experience slow performance when using this volume. To achieve full performance, you should move the data from this volume to a new volume created by RealCrypt 5.0 or later."); } LanguageStrings LangString; diff -Naur truecrypt-7.0a-source.orig//Main/UserInterface.cpp truecrypt-7.0a-source/Main/UserInterface.cpp --- truecrypt-7.0a-source.orig//Main/UserInterface.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/UserInterface.cpp 2010-11-23 16:22:58.000000000 +0100 @@ -48,7 +48,7 @@ if (!Preferences.NonInteractive) { if (!SystemInfo::IsVersionAtLeast (2, 6, 24)) - ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a TrueCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); + ShowWarning (_("Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a RealCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.")); } #endif // TC_LINUX } @@ -280,7 +280,7 @@ prop << LangString["BACKUP_HEADER"] << L": " << LangString[volume.MinRequiredProgramVersion >= 0x600 ? "UISTR_YES" : "UISTR_NO"] << L'\n'; #ifdef TC_LINUX - if (string (volume.VirtualDevice).find ("/dev/mapper/truecrypt") != 0) + if (string (volume.VirtualDevice).find ("/dev/mapper/realcrypt") != 0) { #endif prop << LangString["TOTAL_DATA_READ"] << L": " << SizeToString (volume.TotalDataRead) << L'\n'; @@ -354,10 +354,10 @@ // Unresolved exceptions string typeName (StringConverter::GetTypeName (typeid (ex))); - size_t pos = typeName.find ("TrueCrypt::"); + size_t pos = typeName.find ("RealCrypt::"); if (pos != string::npos) { - return StringConverter::ToWide (typeName.substr (pos + string ("TrueCrypt::").size())) + return StringConverter::ToWide (typeName.substr (pos + string ("RealCrypt::").size())) + L" at " + StringConverter::ToWide (ex.what()); } @@ -466,7 +466,7 @@ EX2MSG (UnsupportedSectorSizeHiddenVolumeProtection, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.")); EX2MSG (UnsupportedSectorSizeNoKernelCrypto, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.")); #else - EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use TrueCrypt on another platform.")); + EX2MSG (UnsupportedSectorSize, _("Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use RealCrypt on another platform.")); #endif EX2MSG (VolumeAlreadyMounted, LangString["VOL_ALREADY_MOUNTED"]); @@ -475,7 +475,7 @@ EX2MSG (VolumeSlotUnavailable, _("Volume slot unavailable.")); #ifdef TC_MACOSX - EX2MSG (HigherFuseVersionRequired, _("TrueCrypt requires MacFUSE 1.3 or later.")); + EX2MSG (HigherFuseVersionRequired, _("RealCrypt requires MacFUSE 1.3 or later.")); #endif #undef EX2MSG @@ -1008,8 +1008,8 @@ wstring helpText = StringConverter::ToWide ( "Synopsis:\n" "\n" - "truecrypt [OPTIONS] COMMAND\n" - "truecrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" + "realcrypt [OPTIONS] COMMAND\n" + "realcrypt [OPTIONS] VOLUME_PATH [MOUNT_DIRECTORY]\n" "\n" "\n" "Commands:\n" @@ -1093,7 +1093,7 @@ "\n" "MOUNTED_VOLUME:\n" " Specifies a mounted volume. One of the following forms can be used:\n" - " 1) Path to the encrypted TrueCrypt volume.\n" + " 1) Path to the encrypted RealCrypt volume.\n" " 2) Mount directory of the volume's filesystem (if mounted).\n" " 3) Slot number of the mounted volume (requires --slot).\n" "\n" @@ -1119,7 +1119,7 @@ "\n" "--fs-options=OPTIONS\n" " Filesystem mount options. The OPTIONS argument is passed to mount(8)\n" - " command with option -o when a filesystem on a TrueCrypt volume is mounted.\n" + " command with option -o when a filesystem on a RealCrypt volume is mounted.\n" " This option is not available on some platforms.\n" "\n" "--hash=HASH\n" @@ -1141,7 +1141,7 @@ " Load user preferences.\n" "\n" "-m, --mount-options=OPTION1[,OPTION2,OPTION3,...]\n" - " Specifies comma-separated mount options for a TrueCrypt volume:\n" + " Specifies comma-separated mount options for a RealCrypt volume:\n" " headerbak: Use backup headers when mounting a volume.\n" " nokernelcrypto: Do not use kernel cryptographic services.\n" " readonly|ro: Mount volume as read-only.\n" @@ -1217,37 +1217,37 @@ "\n" "IMPORTANT:\n" "\n" - "If you want to use TrueCrypt, you must follow the security requirements and\n" + "If you want to use RealCrypt, you must follow the security requirements and\n" "security precautions listed in chapter 'Security Requirements and Precautions'\n" - "in the TrueCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" + "in the RealCrypt documentation (file 'TrueCrypt User Guide.pdf').\n" "\n" "\nExamples:\n\n" "Create a new volume:\n" - "truecrypt -t -c\n" + "realcrypt -t -c\n" "\n" "Mount a volume:\n" - "truecrypt volume.tc /media/truecrypt1\n" + "realcrypt volume.tc /media/realcrypt1\n" "\n" "Mount a volume as read-only, using keyfiles:\n" - "truecrypt -m ro -k keyfile1,keyfile2 volume.tc\n" + "realcrypt -m ro -k keyfile1,keyfile2 volume.tc\n" "\n" "Mount a volume without mounting its filesystem:\n" - "truecrypt --filesystem=none volume.tc\n" + "realcrypt --filesystem=none volume.tc\n" "\n" "Mount a volume prompting only for its password:\n" - "truecrypt -t -k \"\" --protect-hidden=no volume.tc /media/truecrypt1\n" + "realcrypt -t -k \"\" --protect-hidden=no volume.tc /media/realcrypt1\n" "\n" "Dismount a volume:\n" - "truecrypt -d volume.tc\n" + "realcrypt -d volume.tc\n" "\n" "Dismount all mounted volumes:\n" - "truecrypt -d\n" + "realcrypt -d\n" ); #ifndef TC_NO_GUI if (Application::GetUserInterfaceType() == UserInterfaceType::Graphic) { - wxDialog dialog (nullptr, wxID_ANY, _("TrueCrypt Command Line Help"), wxDefaultPosition); + wxDialog dialog (nullptr, wxID_ANY, _("RealCrypt Command Line Help"), wxDefaultPosition); wxTextCtrl *textCtrl = new wxTextCtrl (&dialog, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, wxTE_MULTILINE | wxTE_READONLY); textCtrl->SetFont (wxFont (wxNORMAL_FONT->GetPointSize(), wxFONTFAMILY_DEFAULT, wxFONTSTYLE_NORMAL, wxFONTWEIGHT_NORMAL, false, L"Courier")); diff -Naur truecrypt-7.0a-source.orig//Makefile truecrypt-7.0a-source/Makefile --- truecrypt-7.0a-source.orig//Makefile 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Makefile 2010-11-23 16:19:04.000000000 +0100 @@ -25,7 +25,7 @@ #------ Build configuration ------ -export APPNAME := truecrypt +export APPNAME := realcrypt export BASE_DIR := $(CURDIR) export BUILD_INC := $(BASE_DIR)/Build/Include diff -Naur truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp --- truecrypt-7.0a-source.orig//Platform/Unix/SystemLog.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Platform/Unix/SystemLog.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -13,14 +13,14 @@ { void SystemLog::WriteDebug (const string &debugMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_DEBUG, "%s", debugMessage.c_str()); closelog(); } void SystemLog::WriteError (const string &errorMessage) { - openlog ("truecrypt", LOG_PID, LOG_USER); + openlog ("realcrypt", LOG_PID, LOG_USER); syslog (LOG_ERR, "%s", errorMessage.c_str()); closelog(); } --- truecrypt-6.3a-source.orig/Main/CommandLineInterface.cpp 2009-11-22 15:10:00.000000000 +0000 +++ truecrypt-6.3a-source/Main/CommandLineInterface.cpp 2010-02-15 18:55:13.000000000 +0000 @@ -54,7 +54,7 @@ namespace TrueCrypt parser.AddSwitch (L"", L"list-token-keyfiles", _("List security token keyfiles")); parser.AddSwitch (L"", L"load-preferences", _("Load user preferences")); parser.AddSwitch (L"", L"mount", _("Mount volume interactively")); - parser.AddOption (L"m", L"mount-options", _("TrueCrypt volume mount options")); + parser.AddOption (L"m", L"mount-options", _("RealCrypt volume mount options")); parser.AddOption (L"", L"new-keyfiles", _("New keyfiles")); parser.AddOption (L"", L"new-password", _("New password")); parser.AddSwitch (L"", L"non-interactive", _("Do not interact with user")); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.h truecrypt-7.0a-source/Main/Forms/Forms.h --- truecrypt-7.0a-source.orig//Main/Forms/Forms.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.h 2010-11-23 16:19:04.000000000 +0100 @@ -122,7 +122,7 @@ virtual void OnDefaultKeyfilesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnSecurityTokenPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnPreferencesMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } - virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } +// virtual void OnUserGuideMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnOnlineHelpMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnBeginnersTutorialMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } virtual void OnFaqMenuItemSelected( wxCommandEvent& event ){ event.Skip(); } @@ -150,7 +150,7 @@ public: - MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); + MainFrameBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,496 ), long style = wxCAPTION|wxCLOSE_BOX|wxMINIMIZE_BOX|wxSYSTEM_MENU|wxTAB_TRAVERSAL ); ~MainFrameBase(); }; @@ -335,7 +335,7 @@ public: - EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + EncryptionTestDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Test Vectors"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~EncryptionTestDialogBase(); }; @@ -446,7 +446,7 @@ wxTextCtrl* LegalNoticesTextCtrl; public: - LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + LegalNoticesDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Legal Notices"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~LegalNoticesDialogBase(); }; @@ -497,7 +497,7 @@ public: - MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter TrueCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); + MountOptionsDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("Enter RealCrypt Volume Password"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxSize( -1,-1 ), long style = wxDEFAULT_DIALOG_STYLE ); ~MountOptionsDialogBase(); }; @@ -648,7 +648,7 @@ public: - RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("TrueCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); + RandomPoolEnrichmentDialogBase( wxWindow* parent, wxWindowID id = wxID_ANY, const wxString& title = _("RealCrypt - Random Pool Enrichment"), const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxDEFAULT_DIALOG_STYLE ); ~RandomPoolEnrichmentDialogBase(); }; @@ -1023,6 +1023,6 @@ }; -} // namespace TrueCrypt +} // namespace RealCrypt #endif //__Forms__ diff -Naur truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp truecrypt-7.0a-source/Main/Forms/Forms.cpp --- truecrypt-7.0a-source.orig//Main/Forms/Forms.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/Forms.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -149,9 +149,9 @@ MainMenuBar->Append( SettingsMenu, _("Settin&gs") ); HelpMenu = new wxMenu(); - wxMenuItem* UserGuideMenuItem; +/* wxMenuItem* UserGuideMenuItem; UserGuideMenuItem = new wxMenuItem( HelpMenu, wxID_HELP, wxString( _("User's Guide") ) , wxEmptyString, wxITEM_NORMAL ); - HelpMenu->Append( UserGuideMenuItem ); + HelpMenu->Append( UserGuideMenuItem );*/ wxMenuItem* OnlineHelpMenuItem; OnlineHelpMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("Online Help") ) , wxEmptyString, wxITEM_NORMAL ); @@ -168,7 +168,7 @@ HelpMenu->AppendSeparator(); wxMenuItem* WebsiteMenuItem; - WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("TrueCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); + WebsiteMenuItem = new wxMenuItem( HelpMenu, wxID_ANY, wxString( _("RealCrypt Website") ) , wxEmptyString, wxITEM_NORMAL ); HelpMenu->Append( WebsiteMenuItem ); wxMenuItem* DownloadsMenuItem; @@ -423,7 +423,7 @@ this->Connect( DefaultKeyfilesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Connect( SecurityTokenPreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Connect( PreferencesMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Connect( UserGuideMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Connect( OnlineHelpMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Connect( BeginnersTutorialMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Connect( FaqMenuItem->GetId(), wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -487,7 +487,7 @@ this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnDefaultKeyfilesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnSecurityTokenPreferencesMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnPreferencesMenuItemSelected ) ); - this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); +// this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnUserGuideMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnOnlineHelpMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnBeginnersTutorialMenuItemSelected ) ); this->Disconnect( wxID_ANY, wxEVT_COMMAND_MENU_SELECTED, wxCommandEventHandler( MainFrameBase::OnFaqMenuItemSelected ) ); @@ -1683,7 +1683,7 @@ wxStaticBoxSizer* sbSizer14; sbSizer14 = new wxStaticBoxSizer( new wxStaticBox( SecurityPage, wxID_ANY, _("Password Cache") ), wxVERTICAL ); - WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after TrueCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); + WipeCacheOnCloseCheckBox = new wxCheckBox( SecurityPage, wxID_ANY, _("Wipe after RealCrypt window has been closed"), wxDefaultPosition, wxDefaultSize, 0 ); sbSizer14->Add( WipeCacheOnCloseCheckBox, 0, wxALL, 5 ); @@ -1757,7 +1757,7 @@ bSizer62 = new wxBoxSizer( wxVERTICAL ); wxStaticBoxSizer* sbSizer18; - sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("TrueCrypt Background Task") ), wxVERTICAL ); + sbSizer18 = new wxStaticBoxSizer( new wxStaticBox( BackgroundTaskPanel, wxID_ANY, _("RealCrypt Background Task") ), wxVERTICAL ); BackgroundTaskEnabledCheckBox = new wxCheckBox( BackgroundTaskPanel, wxID_ANY, _("Enabled"), wxDefaultPosition, wxDefaultSize, 0 ); @@ -1801,7 +1801,7 @@ LogOnSizer = new wxStaticBoxSizer( new wxStaticBox( SystemIntegrationPage, wxID_ANY, _("Actions to Perform when User Logs On") ), wxVERTICAL ); - StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start TrueCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); + StartOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Start RealCrypt Background Task"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( StartOnLogonCheckBox, 0, wxALL, 5 ); @@ -1809,7 +1809,7 @@ LogOnSizer->Add( MountFavoritesOnLogonCheckBox, 0, wxALL, 5 ); - MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted TrueCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); + MountDevicesOnLogonCheckBox = new wxCheckBox( SystemIntegrationPage, wxID_ANY, _("Mount all device-hosted RealCrypt volumes"), wxDefaultPosition, wxDefaultSize, 0 ); LogOnSizer->Add( MountDevicesOnLogonCheckBox, 0, wxALL, 5 ); diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp truecrypt-7.0a-source/Main/Forms/MainFrame.cpp --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.cpp 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.cpp 2010-11-23 16:19:04.000000000 +0100 @@ -1365,7 +1365,7 @@ else if (show && !mTaskBarIcon->IsIconInstalled()) { #ifndef TC_MACOSX - mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"TrueCrypt"); + mTaskBarIcon->SetIcon (Resources::GetTrueCryptIcon(), L"RealCrypt"); #endif } } diff -Naur truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h truecrypt-7.0a-source/Main/Forms/MainFrame.h --- truecrypt-7.0a-source.orig//Main/Forms/MainFrame.h 2010-09-05 16:32:10.000000000 +0200 +++ truecrypt-7.0a-source/Main/Forms/MainFrame.h 2010-11-23 16:19:04.000000000 +0100 @@ -127,7 +127,7 @@ void OnVolumeButtonClick (wxCommandEvent& event); void OnVolumeDismounted (EventArgs &args) { UpdateVolumeList(); } void OnVolumeMounted (EventArgs &args) { UpdateVolumeList(); } - void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } +// void OnUserGuideMenuItemSelected (wxCommandEvent& event) { Gui->OpenUserGuide (this); } void OnWebsiteMenuItemSelected (wxCommandEvent& event) { Gui->OpenHomepageLink (this, L"website"); } void OnWipeCacheButtonClick (wxCommandEvent& event); void OrganizeFavorites (const FavoriteVolumeList &favorites, size_t newItemCount = 0); Index: realcrypt.spec =================================================================== RCS file: /cvs/nonfree/rpms/realcrypt/F-16/realcrypt.spec,v retrieving revision 1.17 retrieving revision 1.18 diff -u -r1.17 -r1.18 --- realcrypt.spec 1 Oct 2011 17:41:47 -0000 1.17 +++ realcrypt.spec 13 Apr 2012 14:54:11 -0000 1.18 @@ -1,8 +1,9 @@ #define _default_patch_fuzz 2 +%define _hardened_build 1 Name: realcrypt Summary: Cross platform disk encryption software -Version: 7.1 +Version: 7.1a Release: 1%{?dist} License: TrueCrypt License Version 3.0 Group: Applications/File @@ -35,6 +36,7 @@ Source22: Textual_logo_background_real.bmp.lzma Patch1: realcrypt-rpm_opt_flags.patch Patch2: realcrypt-%{version}-rebranding.patch +Patch3: noexecstack.patch Buildroot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Requires: fuse, pam, usermode, wxGTK >= 2.8.0 @@ -68,6 +70,7 @@ cp %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE7} . %patch1 -p1 -b .realcrypt-rpm_opt_flags %patch2 -p1 -b .realcrypt-%{version}-rebranding +%patch3 -p1 -b .noexecstack # Replace graphics which include the TrueCrypt logo @@ -143,6 +146,10 @@ %changelog +* Fri Apr 13 2012 leigh scott <leigh123linux(a)googlemail.com> - 7.1a-1 +- update to 7.1a +- harden build + * Sat Oct 01 2011 leigh scott <leigh123linux(a)googlemail.com> - 7.1-1 - update to 7.1

12 years, 7 months

1
0
0 / 0

rpms/VirtualBox-OSE-kmod/F-17 VirtualBox-OSE-kmod.spec,1.62,1.63

by Sérgio M. Basto

Author: sergiomb Update of /cvs/free/rpms/VirtualBox-OSE-kmod/F-17 In directory se02.es.rpmfusion.net:/tmp/cvs-serv3963 Modified Files: VirtualBox-OSE-kmod.spec Log Message: * Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-1.1 - New release Index: VirtualBox-OSE-kmod.spec =================================================================== RCS file: /cvs/free/rpms/VirtualBox-OSE-kmod/F-17/VirtualBox-OSE-kmod.spec,v retrieving revision 1.62 retrieving revision 1.63 diff -u -r1.62 -r1.63 --- VirtualBox-OSE-kmod.spec 12 Apr 2012 21:05:53 -0000 1.62 +++ VirtualBox-OSE-kmod.spec 13 Apr 2012 14:19:07 -0000 1.63 @@ -17,8 +17,8 @@ %bcond_without hardening Name: VirtualBox-OSE-kmod -Version: 4.1.8 -Release: 1%{?dist}.3 +Version: 4.1.12 +Release: 1%{?dist}.1 Summary: Kernel module for VirtualBox-OSE Group: System Environment/Kernel @@ -100,6 +100,9 @@ %changelog +* Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-1.1 +- New release + * Thu Apr 12 2012 Nicolas Chauvet <kwizart(a)gmail.com> - 4.1.8-1.3 - rebuild for beta kernel

12 years, 7 months

1
0
0 / 0

rpms/VirtualBox-OSE/F-17 VirtualBox-OSE.spec,1.89,1.90

by Sérgio M. Basto

Author: sergiomb Update of /cvs/free/rpms/VirtualBox-OSE/F-17 In directory se02.es.rpmfusion.net:/tmp/cvs-serv30984 Modified Files: VirtualBox-OSE.spec Log Message: * Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-4 - make a new release tag Index: VirtualBox-OSE.spec =================================================================== RCS file: /cvs/free/rpms/VirtualBox-OSE/F-17/VirtualBox-OSE.spec,v retrieving revision 1.89 retrieving revision 1.90 diff -u -r1.89 -r1.90 --- VirtualBox-OSE.spec 13 Apr 2012 05:32:51 -0000 1.89 +++ VirtualBox-OSE.spec 13 Apr 2012 13:25:33 -0000 1.90 @@ -15,7 +15,7 @@ Name: VirtualBox-OSE Version: 4.1.12 -Release: 3%{?prerel:.%{prerel}}%{?dist} +Release: 4%{?prerel:.%{prerel}}%{?dist} Summary: A general-purpose full virtualizer for PC hardware Group: Development/Tools @@ -507,6 +507,9 @@ %changelog +* Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-4 +- make a new release tag + * Fri Apr 13 2012 Sérgio Basto <sergio(a)serjux.com> - 4.1.12-3 - F17 mesa patch, fix compile fakedri and unbundle part of mesa sources, unbunble mesa source must be tested.

12 years, 7 months

1
0
0 / 0

rpms/VirtualBox-OSE/F-17 sources,1.32,1.33

by Sérgio M. Basto

Author: sergiomb Update of /cvs/free/rpms/VirtualBox-OSE/F-17 In directory se02.es.rpmfusion.net:/tmp/cvs-serv29987 Modified Files: sources Log Message: update source file Index: sources =================================================================== RCS file: /cvs/free/rpms/VirtualBox-OSE/F-17/sources,v retrieving revision 1.32 retrieving revision 1.33 diff -u -r1.32 -r1.33 --- sources 23 Mar 2012 15:37:40 -0000 1.32 +++ sources 13 Apr 2012 13:16:42 -0000 1.33 @@ -1 +1 @@ -263e495ef3a7ab75943af28d446ee702 VirtualBox-4.1.10.tar.bz2 +b6613e2b37562dec0fdede9af044edba VirtualBox-4.1.12.tar.bz2

12 years, 7 months

1
0
0 / 0

← Newer
1
...
17
18
19
20
21
22
23
...
43
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

rpmfusion-commits April 2012