Author: oget
Update of /cvs/free/rpms/rt2860/F-11
In directory se02.es.rpmfusion.net:/tmp/cvs-serv20226
Modified Files:
.cvsignore rt2860.spec sources
Added Files:
ReleaseNote_RT2860.txt blacklist-rt2800pci.conf
Removed Files:
ReleaseNote-RT2860.txt
Log Message:
* Thu Apr 22 2010 Orcan Ogetbil <oget [DOT] fedora [AT] gmail [DOT] com> -
2.3.0.0-1
- version update (2.3.0.0)
--- NEW FILE ReleaseNote_RT2860.txt ---
[2.3.0.0]
1. Support PSP XLINK in ad-hoc mode.
2. Support Linux Kernel 2.6.31/2.6.32.
[2.2.0.0]
1. Fixed issue of showing wrong statistics value.
2. Fixed problem of showing wrong SNR in wireless extension scan list.
3. Support Client WDS.
[2.1.2.0]
1. Short GI sampling improvement.
2. Support Linux Kernel 2.6.29
[2.1.1.0]
1. Fixed driver would send zero IWEVASSOCREQIE to Native WpaSupplicant.
2. Fixed driver would send non-zero BSSID to Navtive WpaSupplicant when STA disconnecting
to AP.
[2.1.0.0]
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too many retry
packet then cause "not enough space in MgmtRing")
3. Fixed WPA(2)PSK issue when group cipher of AP is WEP40 or WEP104.
4. Modified iwpriv ra0 get_site_survey:
In scan list result: Security shows "NONE" when AP is OPEN/NONE, shows
"WEP" when AP is OPEN/WEP or SHARED/WEP, shows
"WPAPSK(WPA2PSK)/TKIP(AES)" when AP is WPAPSK(WPA2PSK)/TKIP(AES) shows
"WPA(WPA2)/TKIP(AES)" when AP is WPA(WPA2)/TKIP(AES)
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in the A band region
4 and the new CE channel 167,169,171,173
7. Add New IEEE802.11r functionality.
8. Fixed WPA2-Enterprise failed when AP reboot or turn off then turn on.
9. Fixed STA cannot connect to 11B only AP when the setting of is PHY_11GN.
[1.8.0.0]
1. Fixed compile error when CARRIER_DETECTION_SUPPORT is enabled.
2. Add "iwpriv ra0 set CarrierDetect=0(or 1)"
3. Add Ad-Hoc to support N rate.
4. Fixed suspend/resume error when ra0 down, ra0 up.
5. Support Linux Kernel 2.6.27
6. Fixed DLS A-MPDU established failed.
[1.7.0.0]
1. Support SIOCSIWGENIE, SIOCGIWGENIE, SIOCSIWMLME, SIOCGIWENCODEEXT, and SIOCSIWPMKSA.
2. Support IWEVGENIE in iwlist ra0 scan.
3. Support DLS
4. Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is
WPAPSK/TKIP.
5. Fixed length error of RSN/SSN IE for WpaSupplicant.
6. Fixed WPAPSK rekey problem when A-MSDU is enabled.
7. Fixed NetworkManager cannot detect ra0 when ra0 is not up.
8. Add IEEE802.11d Client Mode: None, Flexible, Strcit.
9. Add Station N only mode. (Only connects to N-AP)
10. Add Global country domain(ch1-11:active scan, ch12-14 passive scan)
11. Enhance PCIe advance power saving
12. Modified iwpriv ra0 get_site_survey: When security of AP is OPEN/WEP or SHARED/WEP,
show UNKNOW/WEP in scan list.
13. When the secondary channel of AP exceeds the country region's range, station will
auto fallback to 20MHz. i.e. need both control and secondary channel are both
in country region's channel list.
14. Fixed crash in LinkDown when there are >64 APs exists.
[V1.6.0.0]
1. Fixed issue of Radar Channel flag building with HAS_EXT_BUILD_CHANNEL_LIST=n.
2. Fixed issue of Adhoc-STA would create in radar channel.
3. Support Linux Kernel 2.6.24
4. Support SNMP
5. Support Debug Diagnose
6. Add Makefile.NonLoadableModule for non-loadable module
7. Add two ioctl commands to change tx long/short retry limit.
[V1.5.0.0]
1. Add BaSmartHardTransmit mechanism.
2. Support Linux Kernel 2.6 suspend and resume.
3. Support extened channel list.
4. Add "iwconfig rate" setting for legacy rate.
5. Add make install/uninstall to Makfile.
6. Fixed issue of showing SNR1 information.
7. ATE: Add command "iwpriv ra0 set ATELDE2P=1" to overwrite all EEPROM
contents from a .bin file.
8. Change IRQ LOCK to SEM LOCK
9. Fixed extened channel list checking issue on RT28xx.
[V1.4.0.0]]
1. Fixed "iwconfig ra0 essid"
2. Send DIS-ASSOC request to AP when ra0 down.
3. Support 5-GHz band ATE.
4. Fixed fixed rate issue in N mode and fixed rate ioctl.
5. Add Legacy Power Saving Mode.
6. Support custom wireless event.
[V1.3.0.0]
1. Support Monitor Mode with WireShark.(Usage: iwconfig ra0 mode monitor)
2. Support ATE function for EMI.
3. Support NetworkManager, wpa_supplicant by using wext.
[V1.2.0.0]
1. Add AP's wireless mode info to iwpriv ra0 get_site_survey.
2. Modify bitrate info in iwlist ra0 scan.
3. Fixed compile error in non-DBG mode.
[V1.1.0.0]
1. Fxied iwpriv security setting issue.
2. Support Big-Endian.
[V1.0.0.0]
1. Driver security support: Open/Shared WEP, WPA-PSK, WPA2-PSK, WPA-NONE.
2. Support 32/64-bit OS
3. Support A-MPDU and A-MSDU
--- NEW FILE blacklist-rt2800pci.conf ---
# This file comes with RPMFusion's rt2860 package.
# As of kernel 2.6.33, the module that comes with the kernel gets
# loaded for this device and it stops the device from working. So...
blacklist rt2800pci
Index: .cvsignore
===================================================================
RCS file: /cvs/free/rpms/rt2860/F-11/.cvsignore,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -r1.6 -r1.7
--- .cvsignore 23 May 2009 16:16:36 -0000 1.6
+++ .cvsignore 7 May 2010 07:00:09 -0000 1.7
@@ -1 +1 @@
-2009_0521_RT2860_Linux_STA_V2.1.2.0.tgz
+2010_01_29_RT2860_Linux_STA_v2.3.0.0.tar.bz2
--- ReleaseNote-RT2860.txt DELETED ---