rpms/xorg-x11-drv-fglrx/devel fglrx-config-display, 1.2, 1.3 xorg-x11-drv-fglrx.spec, 1.17, 1.18

Author: firewing Update of /cvs/nonfree/rpms/xorg-x11-drv-fglrx/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv2187/devel Modified Files: fglrx-config-display xorg-x11-drv-fglrx.spec Log Message: * Sat Apr 4 2009 Stewart Adam <s.adam at diffingo.com> - 9.3-2 - Only disable ldconfig when driver is already enabled, always configure xorg.conf even if driver is already enabled Index: fglrx-config-display =================================================================== RCS file: /cvs/nonfree/rpms/xorg-x11-drv-fglrx/devel/fglrx-config-display,v retrieving revision 1.2 retrieving revision 1.3 diff -u -r1.2 -r1.3 --- fglrx-config-display 31 Jan 2009 06:25:45 -0000 1.2 +++ fglrx-config-display 4 Apr 2009 23:52:19 -0000 1.3 @@ -18,7 +18,8 @@ # Copyright 2006, 2007 Van Assche Alphonse # Copyright 2006, 2007 Stewart Adam -import string +# internal revision: 2.0 + import os import sys @@ -31,139 +32,142 @@ from livnaConfigDisplay.ConfigFile import ConfigFile class fglrxConfigDisplay(GlxConfig): - def __init__(self): - GlxConfig.__init__(self) - self.vendor = 'fglrx' - self.majorVendor = Utils.getMajorVendor() - if self.vendor != Utils.getVendor(): - print _('The initscript and installed driver vendors do not match!') - sys.exit(1) - self.ldconf = LD_CONF_FILE % (self.vendor) - try: - self.doAllBackups() - except livnaConfigDisplayError, (bkupErrMsg): - print bkupErrMsg - sys.exit(1) - self.xconfig, self.xconfigpath = self.loadXconfig() - self.config = ConfigFile(STATUS_FILE) - self.TOP_MOD_DIR = self.getModTopDir() - - # finally, run arg checks. - self.run() - - def enable(self, isAutoConfigure=True): - # Backup the file before make any change. - currentDriver = self.getDriver() - # Already enabled? - if os.path.exists(self.ldconf): - print _('Driver already enabled.') - return - - # Annoying bit because newer fglrx drivers require a Screen section - if len(self.xconfig.layout) == 0: # no layouts - layout = xf86config.XF86ConfLayout() - self.xconfig.layout.insert(layout) - layout.identifier = "Default Layout" - else: - layout = self.xconfig.layout[0] - if len(layout.adjacencies) == 0: # no layout adjacencies - layout.adjacencies.insert(xf86config.XF86ConfAdjacency()) - layout.adjacencies[0].screen = "Screen0" - if len(self.xconfig.screen) == 0: # no screens - screen = xf86config.XF86ConfScreen() - self.xconfig.screen.insert(screen) - else: - screen = self.xconfig.screen[0] - screen.device = "Videocard0" - screen.defaultdepth = 24 - screen.identifier = "Screen0" - self.xconfig.device[0].identifier = 'Videocard0' - - # fglrx modules - self.addModulePath("/extensions/fglrx", self.TOP_MOD_DIR) - # 'remembering' magic's in here. - self.config.setOldDriver(currentDriver) - #currentDriver = self.config.getOldDriver() - self.toggleDriver(currentDriver, self.majorVendor) - self.addOption(self.majorVendor,"OpenGLOverlay" ,"off") - self.addOption(self.majorVendor,"VideoOverlay" ,"on") - if self.xconfig.modules: - for module in ["glx", "dri", "extmod"]: - if self.onlyHasModule(module): - self.removeModule(module) - break - else: - self.addModule(module) - if os.uname()[4] == "x86_64" : - x86_64Content = "/usr/lib/fglrx\n/usr/lib64/fglrx\n" - Utils.writeFile(self.ldconf, x86_64Content) + """Autoconfiguration class for fglrx""" + def __init__(self): + """Initializes the internal variables & objects""" + GlxConfig.__init__(self) + self.vendor = 'fglrx' + self.majorVendor = Utils.getMajorVendor() + if self.vendor != Utils.getVendor(): + print _('The initscript and installed driver vendors do not match!') + sys.exit(1) + self.ldconf = LD_CONF_FILE % (self.vendor) + try: + self.doAllBackups() + except livnaConfigDisplayError, (bkupErrMsg): + print bkupErrMsg + sys.exit(1) + self.xconfig, self.xconfigpath = self.loadXconfig() + self.config = ConfigFile(STATUS_FILE) + self.TOP_MOD_DIR = self.getModTopDir() + + def enable(self): + """Enable the driver""" + # Backup the file before make any change. + currentDriver = self.getDriver() + + # Annoying bit because newer fglrx drivers require a Screen section + if len(self.xconfig.layout) == 0: # no layouts + layout = xf86config.XF86ConfLayout() + self.xconfig.layout.insert(layout) + layout.identifier = "Default Layout" + else: + layout = self.xconfig.layout[0] + if len(layout.adjacencies) == 0: # no layout adjacencies + layout.adjacencies.insert(xf86config.XF86ConfAdjacency()) + layout.adjacencies[0].screen = "Screen0" + if len(self.xconfig.screen) == 0: # no screens + screen = xf86config.XF86ConfScreen() + self.xconfig.screen.insert(screen) + else: + screen = self.xconfig.screen[0] + screen.device = "Videocard0" + screen.defaultdepth = 24 + screen.identifier = "Screen0" + self.xconfig.device[0].identifier = 'Videocard0' + + # fglrx modules + self.addModulePath("/extensions/fglrx", self.TOP_MOD_DIR) + # 'remembering' magic's in here. Do not allow setting old driver to fglrx. + if currentDriver != self.majorVendor: + self.config.setOldDriver(currentDriver) + self.toggleDriver(currentDriver, self.majorVendor) + self.addOption(self.majorVendor,"OpenGLOverlay" ,"off") + self.addOption(self.majorVendor,"VideoOverlay" ,"on") + if self.xconfig.modules: + for module in ["glx", "dri", "extmod"]: + if self.onlyHasModule(module): + self.removeModule(module) + break else: - Utils.writeFile(self.ldconf,"/usr/lib/fglrx\n") - print _('Running ldconfig, this could take some time...') - Utils.runLdconfig() - Utils.writeXorgConf(self.xconfig, self.xconfigpath) - self.restoreconf() - - def disable(self, isAutoConfigure=True): - self.removeModulePath("/extensions/fglrx", self.TOP_MOD_DIR) - # Check if it's already disabled - if not os.path.exists(self.ldconf): - print _('Driver already disabled.') - return - # We have to save the status file so it can be restored later - self.storeconf() - # Backup the file before make any change. - prevDriver = self.config.getOldDriver() - if prevDriver == self.vendor: - print _('Will not allow reverting from driver \'%s\' to \'%s\'.') % (self.vendor, self.vendor) - print _('Using the \'radeon\' driver instead.') - prevDriver = "radeon" - self.config.setOldDriver("radeon") - self.removeOption(self.majorVendor,"OpenGLOverlay") - self.removeOption(self.majorVendor,"VideoOverlay") - self.toggleDriver(self.majorVendor, prevDriver) - # Let's give control back to the naitive DRI - Utils.removeFile(self.ldconf) - print _('Running ldconfig, this could take some time...') - Utils.runLdconfig() - Utils.writeXorgConf(self.xconfig, self.xconfigpath) - # And return to the Fedora default. - self.enableAiglx() - - def printUsage(self): - print _("Usage: %s-config-display enable | disable ") % self.vendor - - def run(self): - # Check number of arguments - # arg = action - if len(sys.argv) == 2: - arg = sys.argv[1] + self.addModule(module) + # if not already enabled + if not os.path.exists(self.ldconf): + if os.uname()[4] == "x86_64" : + x86_64Content = "/usr/lib/fglrx\n/usr/lib64/fglrx\n" + Utils.writeFile(self.ldconf, x86_64Content) + else: + Utils.writeFile(self.ldconf,"/usr/lib/fglrx\n") + print _('Running ldconfig, this could take some time...') + Utils.runLdconfig() + Utils.writeXorgConf(self.xconfig, self.xconfigpath) + self.restoreconf() + + def disable(self): + """Disables the driver""" + self.removeModulePath("/extensions/fglrx", self.TOP_MOD_DIR) + # Check if it's already disabled + if not os.path.exists(self.ldconf): + print _('Driver already disabled.') + return + # We have to save the status file so it can be restored later + self.storeconf() + # Backup the file before make any change. + prevDriver = self.config.getOldDriver() + if prevDriver == self.vendor: + print _('Will not allow reverting from driver \'%s\' to \'%s\'.') % (self.vendor, self.vendor) + print _('Using the \'radeon\' driver instead.') + prevDriver = "radeon" + self.config.setOldDriver("radeon") + self.removeOption(self.majorVendor,"OpenGLOverlay") + self.removeOption(self.majorVendor,"VideoOverlay") + self.toggleDriver(self.majorVendor, prevDriver) + # Let's give control back to the naitive DRI + Utils.removeFile(self.ldconf) + print _('Running ldconfig, this could take some time...') + Utils.runLdconfig() + Utils.writeXorgConf(self.xconfig, self.xconfigpath) + # And return to the Fedora default. + self.enableAiglx() + + def printUsage(self): + """Displays usage information""" + print _("Usage: %s-config-display enable | disable ") % self.vendor + + def run(self): + """Runs the appropriate autoconfiguation function""" + # Check number of arguments + # arg = action + if len(sys.argv) > 2: + print _('Wrong number of arguments') + self.printUsage() + sys.exit(1) + # Check value of argument + arg = sys.argv[1] + if not arg.lower() in ['enable', 'disable']: + print _('Invalid command: %s') % arg.lower() + self.printUsage() + sys.exit(1) + try: + if arg == "enable": + if self.getActive(): + self.enable() else: - print _('Wrong number of arguments') - self.printUsage() - sys.exit(1) - # Check value of argument - if arg.lower() != "enable" and arg.lower() != "disable": - print _('Invalid command: %s') % arg.lower() - self.printUsage() - sys.exit(1) - try: - if arg == "enable": - if self.getActive(): - self.enable() - else: - print _('livna-config-display\'s `active\' state is False - Exiting') - elif arg == "disable": - if self.getActive(): - self.disable() - except: - raise # Uncomment me to show the real error - print MSG_CONF_APPLY_ERROR - try: - self.doAllRestores() - except livnaConfigDisplayError, (bkupErrMsg): - #raise # Uncomment me to show the real error - print MSG_CONF_RESTORE_ERROR + '\n' + MSG_TRACEBACK % (str(errMsg)) + '\n\n' + str(bkupErrMsg) - sys.exit(1) + print _('livna-config-display\'s `active\' state is False - Exiting') + elif arg == "disable": + if self.getActive(): + self.disable() + except error, errMsg: + #raise # Uncomment me to show the real error + print MSG_CONF_APPLY_ERROR + try: + self.doAllRestores() + except livnaConfigDisplayError, (bkupErrMsg): + #raise # Uncomment me to show the real error + print MSG_CONF_RESTORE_ERROR + '\n' + MSG_TRACEBACK % (str(errMsg)) + '\n\n' + str(bkupErrMsg) + sys.exit(1) + +if __name__ == '__main__': + app = fglrxConfigDisplay() + app.run() -app = fglrxConfigDisplay() Index: xorg-x11-drv-fglrx.spec =================================================================== RCS file: /cvs/nonfree/rpms/xorg-x11-drv-fglrx/devel/xorg-x11-drv-fglrx.spec,v retrieving revision 1.17 retrieving revision 1.18 diff -u -r1.17 -r1.18 --- xorg-x11-drv-fglrx.spec 4 Apr 2009 14:15:32 -0000 1.17 +++ xorg-x11-drv-fglrx.spec 4 Apr 2009 23:52:19 -0000 1.18 @@ -8,14 +8,13 @@ Name: xorg-x11-drv-fglrx Version: 9.4 -Release: 0.2.beta%{?dist} +Release: 0.3.beta%{?dist} Summary: AMD's proprietary driver for ATI graphic cards Group: User Interface/X Hardware Support License: Redistributable, no modification permitted URL: http://www.ati.com/support/drivers/linux/radeon-linux.html #Source0: https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-dri... -# From https://launchpadlibrarian.net/24026289/fglrx-installer_8.600.orig.tar.gz -Source0: fglrx-installer_8.600.orig.tar.gz +Source0: https://launchpadlibrarian.net/24026289/fglrx-installer_8.600.orig.tar.gz Source1: fglrx-README.Fedora Source3: fglrx-config-display Source4: fglrx-init @@ -322,6 +321,10 @@ %{_includedir}/X11/extensions/*.h %changelog +* Sat Apr 4 2009 Stewart Adam <s.adam at diffingo.com> - 9.4-0.3.beta +- Only disable ldconfig when driver is already enabled, always configure + xorg.conf even if driver is already enabled + * Sat Apr 04 2009 Thorsten Leemhuis <fedora [AT] leemhuis [DOT] info> - 9.4-0.2.beta - s/i386/i586/ in ExclusiveArch for F11