rpms/ultrastardx/devel ultrastardx-ffmpeg-headers.patch, NONE, 1.1 .cvsignore, 1.2, 1.3 sources, 1.2, 1.3 ultrastardx.spec, 1.4, 1.5

Author: felix Update of /cvs/free/rpms/ultrastardx/devel In directory se02.es.rpmfusion.net:/tmp/cvs-serv19006 Modified Files: .cvsignore sources ultrastardx.spec Added Files: ultrastardx-ffmpeg-headers.patch Log Message: * Wed Apr 01 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.6.20090331 - new snapshot and reworked ffmpeg headers ultrastardx-ffmpeg-headers.patch: --- NEW FILE ultrastardx-ffmpeg-headers.patch --- Index: src/lib/ffmpeg/avformat.pas =================================================================== --- src/lib/ffmpeg/avformat.pas (Revision 1657) +++ src/lib/ffmpeg/avformat.pas (Arbeitskopie) @@ -27,7 +27,7 @@ (* * Conversion of libavformat/avformat.h * Min. version: 50.5.0 , revision 6577, Sat Oct 7 15:30:46 2006 UTC - * Max. version: 52.25.0, revision 16986, Wed Feb 4 05:56:39 2009 UTC + * Max. version: 52.32.0, revision 18286, Tue Mar 31 22:29:24 2009 UTC *) unit avformat; @@ -60,7 +60,7 @@ const (* Max. supported version by this header *) LIBAVFORMAT_MAX_VERSION_MAJOR = 52; - LIBAVFORMAT_MAX_VERSION_MINOR = 25; + LIBAVFORMAT_MAX_VERSION_MINOR = 32; LIBAVFORMAT_MAX_VERSION_RELEASE = 0; LIBAVFORMAT_MAX_VERSION = (LIBAVFORMAT_MAX_VERSION_MAJOR * VERSION_MAJOR) + (LIBAVFORMAT_MAX_VERSION_MINOR * VERSION_MINOR) + @@ -653,6 +653,18 @@ cur_len: cint; cur_pkt: TAVPacket; {$IFEND} + + {$IF LIBAVFORMAT_VERSION > 52030000} // > 52.30.0 + // Timestamp generation support: + (** + * Timestamp corresponding to the last dts sync point. + * + * Initialized when AVCodecParserContext.dts_sync_point >= 0 and + * a DTS is received from the underlying container. Otherwise set to + * AV_NOPTS_VALUE by default. + *) + reference_dts: cint64; + {$IFEND} end; (** Index: src/lib/ffmpeg/swscale.pas =================================================================== --- src/lib/ffmpeg/swscale.pas (Revision 1657) +++ src/lib/ffmpeg/swscale.pas (Arbeitskopie) @@ -44,13 +44,14 @@ uses ctypes, + avcodec, avutil, UConfig; const (* Max. supported version by this header *) LIBSWSCALE_MAX_VERSION_MAJOR = 0; - LIBSWSCALE_MAX_VERSION_MINOR = 6; + LIBSWSCALE_MAX_VERSION_MINOR = 7; LIBSWSCALE_MAX_VERSION_RELEASE = 1; LIBSWSCALE_MAX_VERSION = (LIBSWSCALE_MAX_VERSION_MAJOR * VERSION_MAJOR) + (LIBSWSCALE_MAX_VERSION_MINOR * VERSION_MINOR) + @@ -130,8 +131,8 @@ // coeffs cannot be shared between vectors PSwsVector = ^TSwsVector; TSwsVector = record - coeff: PCdouble; - length: cint; + coeff: PCdouble; ///< pointer to the list of coefficients + length: cint; ///< number of coefficients in the vector end; // vectors can be shared @@ -152,13 +153,52 @@ procedure sws_freeContext(swsContext: PSwsContext); cdecl; external sw__scale; +(** + * Allocates and returns a SwsContext. You need it to perform + * scaling/conversion operations using sws_scale(). + * + * @param srcW the width of the source image + * @param srcH the height of the source image + * @param srcFormat the source image format + * @param dstW the width of the destination image + * @param dstH the height of the destination image + * @param dstFormat the destination image format + * @param flags specify which algorithm and options to use for rescaling + * @return a pointer to an allocated context, or NULL in case of error + *) function sws_getContext(srcW: cint; srcH: cint; srcFormat: TAVPixelFormat; dstW: cint; dstH: cint; dstFormat: TAVPixelFormat; flags: cint; srcFilter: PSwsFilter; dstFilter: PSwsFilter; param: PCdouble): PSwsContext; cdecl; external sw__scale; -function sws_scale(context: PSwsContext; src: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint; srcSliceH: cint; + +(** + * Scales the image slice in \p srcSlice and puts the resulting scaled + * slice in the image in \p dst. A slice is a sequence of consecutive + * rows in an image. + * + * @param context the scaling context previously created with + * sws_getContext() + * @param srcSlice the array containing the pointers to the planes of + * the source slice + * @param srcStride the array containing the strides for each plane of + * the source image + * @param srcSliceY the position in the source image of the slice to + * process, that is the number (counted starting from + * zero) in the image of the first row of the slice + * @param srcSliceH the height of the source slice, that is the number + * of rows in the slice + * @param dst the array containing the pointers to the planes of + * the destination image + * @param dstStride the array containing the strides for each plane of + * the destination image + * @return the height of the output slice + *) +function sws_scale(context: PSwsContext; srcSlice: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint; srcSliceH: cint; dst: PPCuint8Array; dstStride: PCintArray): cint; cdecl; external sw__scale; +(** + * @deprecated Use sws_scale() instead. + *) function sws_scale_ordered(context: PSwsContext; src: PPCuint8Array; srcStride: PCintArray; srcSliceY: cint; srcSliceH: cint; dst: PPCuint8Array; dstStride: PCintArray): cint; cdecl; external sw__scale; deprecated; @@ -169,14 +209,38 @@ function sws_getColorspaceDetails(c: PSwsContext; var inv_table: PQuadCintArray; var srcRange: cint; var table: PQuadCintArray; var dstRange: cint; var brightness: cint; var contrast: cint; var saturation: cint): cint; cdecl; external sw__scale; + +(** + * Returns a normalized Gaussian curve used to filter stuff + * quality=3 is high quality, lower is lower quality. + *) function sws_getGaussianVec(variance: cdouble; quality: cdouble): PSwsVector; cdecl; external sw__scale; + +(** + * Allocates and returns a vector with \p length coefficients, all + * with the same value \p c. + *) function sws_getConstVec(c: cdouble; length: cint): PSwsVector; cdecl; external sw__scale; + +(** + * Allocates and returns a vector with just one coefficient, with + * value 1.0. + *) function sws_getIdentityVec: PSwsVector; cdecl; external sw__scale; + +(** + * Scales all the coefficients of \p a by the \p scalar value. + *) procedure sws_scaleVec(a: PSwsVector; scalar: cdouble); cdecl; external sw__scale; + +(** + * Scales all the coefficients of \p a so that their sum equals \p + * height." + *) procedure sws_normalizeVec(a: PSwsVector; height: cdouble); cdecl; external sw__scale; procedure sws_convVec(a: PSwsVector; b: PSwsVector); @@ -187,23 +251,53 @@ cdecl; external sw__scale; procedure sws_shiftVec(a: PSwsVector; shift: cint); cdecl; external sw__scale; + +(** + * Allocates and returns a clone of the vector \p a, that is a vector + * with the same coefficients as \p a. + *) function sws_cloneVec(a: PSwsVector): PSwsVector; cdecl; external sw__scale; +(** + * @deprecated Use sws_printVec2() instead. + *) procedure sws_printVec(a: PSwsVector); cdecl; external sw__scale; + +(** + * Prints with av_log() a textual representation of the vector \p a + * if \p log_level <= av_log_level. + *) + +procedure sws_printVec2(a: PSwsVector; log_ctx: TAVClass; log_level: cint); + cdecl; external sw__scale; + procedure sws_freeVec(a: PSwsVector); cdecl; external sw__scale; -function sws_getDefaultFilter(lumaGBlur: cfloat; chromaGBlur: cfloat; lumaSarpen: cfloat; chromaSharpen: cfloat; chromaHShift: cfloat; +function sws_getDefaultFilter(lumaGBlur: cfloat; chromaGBlur: cfloat; lumaSharpen: cfloat; chromaSharpen: cfloat; chromaHShift: cfloat; chromaVShift: cfloat; verbose: cint): PSwsFilter; cdecl; external sw__scale; procedure sws_freeFilter(filter: PSwsFilter); cdecl; external sw__scale; +(** + * Checks if \p context can be reused, otherwise reallocates a new + * one. + * + * If \p context is NULL, just calls sws_getContext() to get a new + * context. Otherwise, checks if the parameters are the ones already + * saved in \p context. If that is the case, returns the current + * context. Otherwise, frees \p context and gets a new context with + * the new parameters. + * + * Be warned that \p srcFilter and \p dstFilter are not checked, they + * are assumed to remain the same. + *) function sws_getCachedContext(context: PSwsContext; - srcW: cint; srcH: cint; srcFormat: cint; - dstW: cint; dstH: cint; dstFormat: cint; flags: cint; + srcW: cint; srcH: cint; srcFormat: TAVPixelFormat; + dstW: cint; dstH: cint; dstFormat: TAVPixelFormat; flags: cint; srcFilter: PSwsFilter; dstFilter: PSwsFilter; param: PCdouble): PSwsContext; cdecl; external sw__scale; Index: src/lib/ffmpeg/avcodec.pas =================================================================== --- src/lib/ffmpeg/avcodec.pas (Revision 1657) +++ src/lib/ffmpeg/avcodec.pas (Arbeitskopie) @@ -27,7 +27,7 @@ (* * Conversion of libavcodec/avcodec.h * Min. version: 51.16.0, revision 6577, Sat Oct 7 15:30:46 2006 UTC - * Max. version: 52.11.0, revision 16912, Sun Feb 1 02:00:19 2009 UTC + * Max. version: 52.22.3, revision 18286, Tue Mar 31 22:29:24 2009 UTC *) unit avcodec; @@ -60,8 +60,8 @@ const (* Max. supported version by this header *) LIBAVCODEC_MAX_VERSION_MAJOR = 52; - LIBAVCODEC_MAX_VERSION_MINOR = 11; - LIBAVCODEC_MAX_VERSION_RELEASE = 0; + LIBAVCODEC_MAX_VERSION_MINOR = 22; + LIBAVCODEC_MAX_VERSION_RELEASE = 3; LIBAVCODEC_MAX_VERSION = (LIBAVCODEC_MAX_VERSION_MAJOR * VERSION_MAJOR) + (LIBAVCODEC_MAX_VERSION_MINOR * VERSION_MINOR) + (LIBAVCODEC_MAX_VERSION_RELEASE * VERSION_RELEASE); @@ -233,6 +233,9 @@ CODEC_ID_MOTIONPIXELS, CODEC_ID_TGV, CODEC_ID_TGQ, + CODEC_ID_TQI, + CODEC_ID_AURA, + CODEC_ID_AURA2, //* various PCM "codecs" */ CODEC_ID_PCM_S16LE= $10000, @@ -354,6 +357,8 @@ CODEC_ID_EAC3, CODEC_ID_SIPR, CODEC_ID_MP1, + CODEC_ID_TWINVQ, + CODEC_ID_TRUEHD, //* subtitle codecs */ CODEC_ID_DVD_SUBTITLE= $17000, @@ -753,6 +758,7 @@ * is this picture used as reference * The values for this are the same as the MpegEncContext.picture_structure * variable, that is 1->top field, 2->bottom field, 3->frame/both fields. + * Set to 4 for delayed, non-reference frames.\ * - encoding: unused * - decoding: Set by libavcodec. (before get_buffer() call)). *) @@ -886,7 +892,17 @@ *) reordered_opaque: cint64; {$IFEND} - + + {$IF LIBAVCODEC_VERSION >= 52021000} // 52.21.0 + (** + * hardware accelerator private data (FFmpeg allocated) + * - encoding: unused + * - decoding: Set by libavcodec + *) + hwaccel_data_private: pointer; + hwaccel_picture_private: pointer; + {$IFEND} + {$IF LIBAVCODEC_VERSION >= 51070000} // 51.70.0 (** * Bits per sample/pixel of internal libavcodec pixel/sample format. @@ -928,6 +944,40 @@ *) rc_min_vbv_overflow_use: cfloat; {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0 + (** + * Hardware accelerator in use + * - encoding: unused. + * - decoding: Set by libavcodec + *) + hwaccel: pointer; + {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52020000} // 52.20.0 + (** + * For some codecs, the time base is closer to the field rate than the frame rate. + * Most notably, H.264 and MPEG-2 specify time_base as half of frame duration + * if no telecine is used ... + * + * Set to time_base ticks per frame. Default 1, e.g., H.264/MPEG-2 set it to 2. + *) + ticks_per_frame: cint; + {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52021000} // 52.21.0 + (** + * Hardware accelerator context. + * For some hardware accelerators, a global context needs to be + * provided by the user. In that case, this holds display-dependent + * data FFmpeg cannot instantiate itself. Please refer to the + * FFmpeg HW accelerator documentation to know how to fill this + * is. e.g. for VA API, this is a struct vaapi_context. + * - encoding: unused + * - decoding: Set by user + *) + hwaccel_context: pointer; + {$IFEND} end; const @@ -1273,6 +1323,13 @@ * decoder to draw a horizontal band. It improves cache usage. Not * all codecs can do that. You must check the codec capabilities * beforehand. + * The function is also used by hardware acceleration APIs. + * It is called at least once during frame decoding to pass + * the data needed for hardware render. + * In that mode instead of pixel data, AVFrame points to + * a structure specific to the acceleration API. The application + * reads the structure and can change some fields to indicate progress + * or mark state. * - encoding: unused * - decoding: Set by user. * @param height the height of the slice @@ -1505,7 +1562,8 @@ release_buffer: procedure (c: PAVCodecContext; pic: PAVFrame); cdecl; (** - * If 1 the stream has a 1 frame delay during decoding. + * Size of the frame reordering buffer in the decoder. + * For MPEG-2 it is 1 IPB or 0 low delay IP. * - encoding: Set by libavcodec. * - decoding: Set by libavcodec. *) @@ -2511,7 +2569,102 @@ {$IFEND} end; +type (** + * AVHWAccel. + *) + PAVHWAccel = ^TAVHWAccel; + TAVHWAccel = record + (** + * Name of the hardware accelerated codec. + * The name is globally unique among encoders and among decoders (but an + * encoder and a decoder can share the same name). + *) + name: PAnsiChar; + + (** + * Type of codec implemented by the hardware accelerator. + * + * See CODEC_TYPE_xxx + *) + type_: TCodecType; + + (** + * Codec implemented by the hardware accelerator. + * + * See CODEC_ID_xxx + *) + id: TCodecID; + + (** + * Supported pixel format. + * + * Only hardware accelerated formats are supported here. + *) + pix_fmt: {const} PAVPixelFormat; + + (** + * Hardware accelerated codec capabilities. + * see FF_HWACCEL_CODEC_CAP_* + *) + capabilities: cint; + + next: PAVCodec; + + (** + * Called at the beginning of each frame or field picture. + * + * Meaningful frame information (codec specific) is guaranteed to + * be parsed at this point. This function is mandatory. + * + * Note that \p buf can be NULL along with \p buf_size set to 0. + * Otherwise, this means the whole frame is available at this point. + * + * @param avctx the codec context + * @param buf the frame data buffer base + * @param buf_size the size of the frame in bytes + * @return zero if successful, a negative value otherwise + *) + start_frame: function (avctx: PAVCodecContext; buf: PByteArray; buf_size: cint): cint; cdecl; + + (** + * Callback for each slice. + * + * Meaningful slice information (codec specific) is guaranteed to + * be parsed at this point. This function is mandatory. + * + * @param avctx the codec context + * @param buf the slice data buffer base + * @param buf_size the size of the slice in bytes + * @return zero if successful, a negative value otherwise + *) + decode_slice: function (avctx: PAVCodecContext; buf: PByteArray; buf_size: cint): cint; cdecl; + + (** + * Called at the end of each frame or field picture. + * + * The whole picture is parsed at this point and can now be sent + * to the hardware accelerator. This function is mandatory. + * + * @param avctx the codec context + * @return zero if successful, a negative value otherwise + *) + end_frame: function (avctx: PAVCodecContext): cint; cdecl; + + {$IF LIBAVCODEC_VERSION < 52021000} // < 52.21.0 + (** + * Size of HW accelerator private data. + * + * Private data is allocated with av_malloc() before + * AVCodecContext::get_buffer() and deallocated after + * AVCodecContext::release_buffer(). + *) + priv_data_size: cint; + {$IFEND} + + end; + +(** * four components are given, that's all. * the last component is alpha *) @@ -2603,6 +2756,30 @@ function audio_resample_init (output_channels: cint; input_channels: cint; output_rate: cint; input_rate: cint): PReSampleContext; + cdecl; external av__codec; deprecated; + + +(** + * Initializes audio resampling context + * + * @param output_channels number of output channels + * @param input_channels number of input channels + * @param output_rate output sample rate + * @param input_rate input sample rate + * @param sample_fmt_out requested output sample format + * @param sample_fmt_in input sample format + * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq + * @param log2_phase_count log2 of the number of entries in the polyphase filterbank + * @param linear If 1 then the used FIR filter will be linearly interpolated + between the 2 closest, if 0 the closest will be used + * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate + * @return allocated ReSampleContext, NULL if error occured + *) +function av_audio_resample_init (output_channels: cint; input_channels: cint; + output_rate: cint; input_rate: cint; + sample_fmt_out: TSampleFormat; sample_fmt_in: TSampleFormat; + filter_length: cint; log2_phase_count: cint; + linear: cint; cutoff: cdouble): PReSampleContext; cdecl; external av__codec; function audio_resample (s: PReSampleContext; output: PSmallint; input: PSmallint; nb_samples: cint): cint; @@ -2611,15 +2788,44 @@ procedure audio_resample_close (s: PReSampleContext); cdecl; external av__codec; - +(** + * Initializes an audio resampler. + * Note, if either rate is not an integer then simply scale both rates up so they are. + * @param filter_length length of each FIR filter in the filterbank relative to the cutoff freq + * @param log2_phase_count log2 of the number of entries in the polyphase filterbank + * @param linear If 1 then the used FIR filter will be linearly interpolated + between the 2 closest, if 0 the closest will be used + * @param cutoff cutoff frequency, 1.0 corresponds to half the output sampling rate + *) function av_resample_init (out_rate: cint; in_rate: cint; filter_length: cint; log2_phase_count: cint; linear: cint; cutoff: cdouble): PAVResampleContext; cdecl; external av__codec; +(** + * resamples. + * @param src an array of unconsumed samples + * @param consumed the number of samples of src which have been consumed are returned here + * @param src_size the number of unconsumed samples available + * @param dst_size the amount of space in samples available in dst + * @param update_ctx If this is 0 then the context will not be modified, that way several channels can be resampled with the same context. + * @return the number of samples written in dst or -1 if an error occurred + *) function av_resample (c: PAVResampleContext; dst: PSmallint; src: PSmallint; var consumed: cint; src_size: cint; dst_size: cint; update_ctx: cint): cint; cdecl; external av__codec; +(** + * Compensates samplerate/timestamp drift. The compensation is done by changing + * the resampler parameters, so no audible clicks or similar distortions occur + * @param compensation_distance distance in output samples over which the compensation should be performed + * @param sample_delta number of output samples which should be output less + * + * example: av_resample_compensate(c, 10, 500) + * here instead of 510 samples only 500 samples would be output + * + * note, due to rounding the actual compensation might be slightly different, + * especially if the compensation_distance is large and the in_rate used during init is small + *) procedure av_resample_compensate (c: PAVResampleContext; sample_delta: cint; compensation_distance: cint); cdecl; external av__codec; @@ -2692,6 +2898,7 @@ * If a planar format is specified, several pointers will be set pointing to * the different picture planes and the line sizes of the different planes * will be stored in the lines_sizes array. + * Call with ptr == NULL to get the required size for the ptr buffer. * * @param picture AVPicture whose fields are to be filled in * @param ptr Buffer which will contain or contains the actual image data @@ -2712,11 +2919,14 @@ (** * Calculate the size in bytes that a picture of the given width and height * would occupy if stored in the given picture format. + * Note that this returns the size of a compact representation as generated + * by avpicture_layout, which can be smaller than the size required for e.g. + * avpicture_fill. * * @param pix_fmt the given picture format * @param width the width of the image * @param height the height of the image - * @return Image data size in bytes + * @return Image data size in bytes or -1 on error (e.g. too large dimensions). *) function avpicture_get_size (pix_fmt: TAVPixelFormat; width: cint; height: cint): cint; cdecl; external av__codec; @@ -2730,6 +2940,17 @@ procedure avcodec_set_dimensions(s: PAVCodecContext; width: cint; height: cint); cdecl; external av__codec; +(** + * Returns the pixel format corresponding to the name \p name. + * + * If there is no pixel format with name \p name, then looks for a + * pixel format with the name corresponding to the native endian + * format of \p name. + * For example in a little-endian system, first looks for "gray16", + * then for "gray16le". + * + * Finally if no pixel format has been found, returns \c PIX_FMT_NONE. + *) function avcodec_get_pix_fmt(name: {const} PAnsiChar): TAVPixelFormat; cdecl; external av__codec; @@ -2851,6 +3072,11 @@ } {$IFEND} +(** + * If c is NULL, returns the first registered codec, + * if c is non-NULL, returns the next registered codec after c, + * or NULL if c is the last one. + *) {$IF LIBAVCODEC_VERSION >= 51049000} // 51.49.0 function av_codec_next(c: PAVCodec): PAVCodec; cdecl; external av__codec; @@ -2882,9 +3108,13 @@ * * @see avcodec_init() *) +{$IF LIBAVCODEC_VERSION >= 52014000} // 52.14.00 +procedure avcodec_register(codec: PAVCodec); + cdecl; external av__codec; deprecated; +{$ELSE} procedure register_avcodec(codec: PAVCodec); - cdecl; external av__codec; - + cdecl; external av__codec; deprecated; +{$IFEND} (** * Finds a registered encoder with a matching codec ID. * @@ -3207,7 +3437,7 @@ * which formats you want to support, by using the individual registration * functions. * - * @see register_avcodec + * @see avcodec_register * @see av_register_codec_parser * @see av_register_bitstream_filter *) @@ -3271,6 +3501,15 @@ next_frame_offset: cint64; (* offset of the next frame *) (* video info *) pict_type: cint; (* XXX: put it back in AVCodecContext *) + (** + * This field is used for proper frame duration computation in lavf. + * It signals, how much longer the frame duration of the current frame + * is compared to normal frame duration. + * + * frame_duration = (1 + repeat_pict) * time_base + * + * It is used by codecs like H.264 to display telecined material. + *) repeat_pict: cint; (* XXX: put it back in AVCodecContext *) pts: cint64; (* pts of the current frame *) dts: cint64; (* dts of the current frame *) @@ -3293,6 +3532,98 @@ {$IF LIBAVCODEC_VERSION >= 51057001} // 51.57.1 cur_frame_end: array [0..AV_PARSER_PTS_NB - 1] of cint64; {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52016000} // 52.16.0 + (*! + * Set by parser to 1 for key frames and 0 for non-key frames. + * It is initialized to -1, so if the parser doesn't set this flag, + * old-style fallback using FF_I_TYPE picture type as key frames + * will be used. + *) + + key_frame: cint; + {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52018000} // 52.18.0 + (** + * Time difference in stream time base units from the pts of this + * packet to the point at which the output from the decoder has converged + * independent from the availability of previous frames. That is, the + * frames are virtually identical no matter if decoding started from + * the very first frame or from this keyframe. + * Is AV_NOPTS_VALUE if unknown. + * This field is not the display duration of the current frame. + * + * The purpose of this field is to allow seeking in streams that have no + * keyframes in the conventional sense. It corresponds to the + * recovery point SEI in H.264 and match_time_delta in NUT. It is also + * essential for some types of subtitle streams to ensure that all + * subtitles are correctly displayed after seeking. + *) + convergence_duration: cint64; + {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0 + // Timestamp generation support: + (** + * Synchronization point for start of timestamp generation. + * + * Set to >0 for sync point, 0 for no sync point and <0 for undefined + * (default). + * + * For example, this corresponds to presence of H.264 buffering period + * SEI message. + *) + dts_sync_point: cint; + + (** + * Offset of the current timestamp against last timestamp sync point in + * units of AVCodecContext.time_base. + * + * Set to INT_MIN when dts_sync_point unused. Otherwise, it must + * contain a valid timestamp offset. + * + * Note that the timestamp of sync point has usually a nonzero + * dts_ref_dts_delta, which refers to the previous sync point. Offset of + * the next frame after timestamp sync point will be usually 1. + * + * For example, this corresponds to H.264 cpb_removal_delay. + *) + dts_ref_dts_delta: cint; + + (** + * Presentation delay of current frame in units of AVCodecContext.time_base. + * + * Set to INT_MIN when dts_sync_point unused. Otherwise, it must + * contain valid non-negative timestamp delta (presentation time of a frame + * must not lie in the past). + * + * This delay represents the difference between decoding and presentation + * time of the frame. + * + * For example, this corresponds to H.264 dpb_output_delay. + *) + pts_dts_delta: cint; + {$IFEND} + + {$IF LIBAVCODEC_VERSION >= 52019000} // 52.19.0 + (** + * Position of the packet in file. + * + * Analogous to cur_frame_pts/dts + *) + cur_frame_pos: array [0..AV_PARSER_PTS_NB - 1] of cint64; + + (** + * Byte position of currently parsed frame in stream. + *) + pos: cint64; + + (** + * Previous frame byte position. + *) + last_pos: cint64; + {$IFEND} end; TAVCodecParser = record @@ -3332,11 +3663,47 @@ poutbuf: PPointer; poutbuf_size: PCint; buf: {const} PByteArray; buf_size: cint; pts: cint64; dts: cint64): cint; + cdecl; external av__codec; deprecated; +(** + * Parse a packet. + * + * @param s parser context. + * @param avctx codec context. + * @param poutbuf set to pointer to parsed buffer or NULL if not yet finished. + * @param poutbuf_size set to size of parsed buffer or zero if not yet finished. + * @param buf input buffer. + * @param buf_size input length, to signal EOF, this should be 0 (so that the last frame can be output). + * @param pts input presentation timestamp. + * @param dts input decoding timestamp. + * @param pos input byte position in stream. + * @return the number of bytes of the input bitstream used. + * + * Example: + * @code + * while(in_len){ + * len = av_parser_parse2(myparser, AVCodecContext, &data, &size, + * in_data, in_len, + * pts, dts, pos); + * in_data += len; + * in_len -= len; + * + * if(size) + * decode_frame(data, size); + * } + * @endcode + *) +function av_parser_parse2(s: PAVCodecParserContext; + avctx: PAVCodecContext; + poutbuf: PPointer; poutbuf_size: PCint; + buf: {const} PByteArray; buf_size: cint; + pts: cint64; dts: cint64; + pos: cint64): cint; cdecl; external av__codec; + function av_parser_change(s: PAVCodecParserContext; - avctx: PAVCodecContext; - poutbuf: PPointer; poutbuf_size: PCint; - buf: {const} PByteArray; buf_size: cint; keyframe: cint): cint; + avctx: PAVCodecContext; + poutbuf: PPointer; poutbuf_size: PCint; + buf: {const} PByteArray; buf_size: cint; keyframe: cint): cint; cdecl; external av__codec; procedure av_parser_close(s: PAVCodecParserContext); cdecl; external av__codec; @@ -3434,20 +3801,20 @@ * Copy image 'src' to 'dst'. *) procedure av_picture_copy(dst: PAVPicture; src: {const} PAVPicture; - pix_fmt: cint; width: cint; height: cint); + pix_fmt: TAVPixelFormat; width: cint; height: cint); cdecl; external av__codec; (** * Crop image top and left side. *) function av_picture_crop(dst: PAVPicture; src: {const} PAVPicture; - pix_fmt: cint; top_band: cint; left_band: cint): cint; + pix_fmt: TAVPixelFormat; top_band: cint; left_band: cint): cint; cdecl; external av__codec; (** * Pad image. *) -function av_picture_pad(dst: PAVPicture; src: {const} PAVPicture; height: cint; width: cint; pix_fmt: cint; +function av_picture_pad(dst: PAVPicture; src: {const} PAVPicture; height: cint; width: cint; pix_fmt: TAVPixelFormat; padtop: cint; padbottom: cint; padleft: cint; padright: cint; color: PCint): cint; cdecl; external av__codec; {$IFEND} @@ -3499,7 +3866,7 @@ * * @return 0 in case of a successful parsing, a negative value otherwise * @param[in] str the string to parse: it has to be a string in the format - * <frame_rate_nom>/<frame_rate_den>, a float number or a valid video rate abbreviation + * <frame_rate_num>/<frame_rate_den>, a float number or a valid video rate abbreviation * @param[in,out] frame_rate pointer to the AVRational which will contain the detected * frame rate *) @@ -3518,11 +3885,13 @@ EDOM = ESysEDOM; ENOSYS = ESysENOSYS; EILSEQ = ESysEILSEQ; + EPIPE = ESysEPIPE; {$ELSE} ENOENT = 2; EIO = 5; ENOMEM = 12; EINVAL = 22; + EPIPE = 32; EDOM = 33; {$IFDEF MSWINDOWS} // Note: we assume that ffmpeg was compiled with MinGW. @@ -3559,11 +3928,27 @@ AVERROR_NOMEM = AVERROR_SIGN * ENOMEM; (**< not enough memory *) AVERROR_NOFMT = AVERROR_SIGN * EILSEQ; (**< unknown format *) AVERROR_NOTSUPP = AVERROR_SIGN * ENOSYS; (**< Operation not supported. *) - AVERROR_NOENT = AVERROR_SIGN * ENOENT; {**< No such file or directory. *} + AVERROR_NOENT = AVERROR_SIGN * ENOENT; (**< No such file or directory. *) + AVERROR_EOF = AVERROR_SIGN * EPIPE; (**< End of file. *) // Note: function calls as constant-initializers are invalid //AVERROR_PATCHWELCOME = -MKTAG('P','A','W','E'); {**< Not yet implemented in FFmpeg. Patches welcome. *} AVERROR_PATCHWELCOME = -(ord('P') or (ord('A') shl 8) or (ord('W') shl 16) or (ord('E') shl 24)); + +(** + * Registers the hardware accelerator \p hwaccel. + *) +procedure av_register_hwaccel (hwaccel: PAVHWAccel) + cdecl; external av__codec; + +(** + * If hwaccel is NULL, returns the first registered hardware accelerator, + * if hwaccel is non-NULL, returns the next registered hardware accelerator + * after hwaccel, or NULL if hwaccel is the last one. + *) +function av_hwaccel_next (hwaccel: PAVHWAccel): PAVHWAccel; + cdecl; external av__codec; + implementation end. Index: src/lib/ffmpeg/avutil.pas =================================================================== --- src/lib/ffmpeg/avutil.pas (Revision 1657) +++ src/lib/ffmpeg/avutil.pas (Arbeitskopie) @@ -29,7 +29,7 @@ * * libavutil/avutil.h: * Min. version: 49.0.1, revision 6577, Sat Oct 7 15:30:46 2006 UTC - * Max. version: 49.14.0, revision 16912, Sun Feb 1 02:00:19 2009 UTC + * Max. version: 50.2.0, revision 18286, Tue Mar 31 22:29:24 2009 UTC * * libavutil/mem.h: * revision 16590, Tue Jan 13 23:44:16 2009 UTC @@ -62,8 +62,8 @@ const (* Max. supported version by this header *) - LIBAVUTIL_MAX_VERSION_MAJOR = 49; - LIBAVUTIL_MAX_VERSION_MINOR = 14; + LIBAVUTIL_MAX_VERSION_MAJOR = 50; + LIBAVUTIL_MAX_VERSION_MINOR = 2; LIBAVUTIL_MAX_VERSION_RELEASE = 0; LIBAVUTIL_MAX_VERSION = (LIBAVUTIL_MAX_VERSION_MAJOR * VERSION_MAJOR) + (LIBAVUTIL_MAX_VERSION_MINOR * VERSION_MINOR) + Index: .cvsignore =================================================================== RCS file: /cvs/free/rpms/ultrastardx/devel/.cvsignore,v retrieving revision 1.2 retrieving revision 1.3 diff -u -r1.2 -r1.3 --- .cvsignore 31 Mar 2009 09:09:33 -0000 1.2 +++ .cvsignore 1 Apr 2009 08:14:09 -0000 1.3 @@ -1,3 +1 @@ -ultrastardx-20090303.tar.lzma -ultrastardx-256x256.png -ultrastardx-32x32.png +ultrastardx-20090331.tar.lzma Index: sources =================================================================== RCS file: /cvs/free/rpms/ultrastardx/devel/sources,v retrieving revision 1.2 retrieving revision 1.3 diff -u -r1.2 -r1.3 --- sources 31 Mar 2009 09:09:33 -0000 1.2 +++ sources 1 Apr 2009 08:14:09 -0000 1.3 @@ -1,3 +1 @@ -0c33aff1ad3d1fba02724f65c3b988af ultrastardx-20090303.tar.lzma -06d53bbf4696562e89cc3d4f4f93738c ultrastardx-256x256.png -15839edfa9383201bee0565e4a8b9d53 ultrastardx-32x32.png +80a32a078bafe5caa94f72be81d13e97 ultrastardx-20090331.tar.lzma Index: ultrastardx.spec =================================================================== RCS file: /cvs/free/rpms/ultrastardx/devel/ultrastardx.spec,v retrieving revision 1.4 retrieving revision 1.5 diff -u -r1.4 -r1.5 --- ultrastardx.spec 31 Mar 2009 09:09:33 -0000 1.4 +++ ultrastardx.spec 1 Apr 2009 08:14:09 -0000 1.5 @@ -1,8 +1,8 @@ -%define prever 20090303 +%define prever 20090331 Name: ultrastardx Version: 1.1.1 -Release: 1%{?prever:.5.%{prever}}%{?dist} +Release: 1%{?prever:.6.%{prever}}%{?dist} Summary: Karaoke game inspired by a popular commercial karaoke game Group: Amusements/Games @@ -14,6 +14,7 @@ Source2: ultrastardx-256x256.png Source100: ultrastardx-snapshot.sh Patch0: ultrastardx-desktop.patch +Patch1: ultrastardx-ffmpeg-headers.patch BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) Requires: bitstream-vera-sans-fonts gnu-free-sans-fonts @@ -32,6 +33,7 @@ %prep %setup -q -n %{name}%{?prever:-%{prever}} %patch0 -p1 +%patch1 # replace the font paths with Fedora's own sed -i 's|File=|File=%{_datadir}/fonts/|g' game/fonts/fontsTTF.ini @@ -92,6 +94,9 @@ %changelog +* Wed Apr 01 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.6.20090331 +- new snapshot and reworked ffmpeg headers + * Tue Mar 31 2009 Felix Kaechele <felix at fetzig dot org> - 1.1.1-1.5.20090303 - fixed font deps