Author: zultron Update of /cvs/nonfree/rpms/freecad/EL-6 In directory old02.ovh.rpmfusion.lan:/tmp/cvs-serv10969 Modified Files: sources Added Files: freecad-0.12-OpenCASCADE-option.patch freecad-0.12-pycxx.patch freecad-0.12-rm_f2c.patch freecad-0.12-zipios.patch freecad-3rdParty.patch freecad-StartPage.patch freecad-cmake_Mod_fix.patch freecad-gcc-4.7.patch freecad-glu.patch freecad-system_inst.patch freecad.1 freecad.desktop freecad.spec Log Message: Initial import of files from F-18 to EL-6 tree freecad-0.12-OpenCASCADE-option.patch: CMakeLists.txt | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) --- NEW FILE freecad-0.12-OpenCASCADE-option.patch --- --- FreeCAD-0.12.5284.orig/CMakeLists.txt 2012-06-24 01:14:02.000000000 -0500 +++ FreeCAD-0.12.5284/CMakeLists.txt 2012-06-24 01:18:52.000000000 -0500 @@ -163,15 +163,20 @@ #first, look for OpenCASCADE Community Edition (OCE) #if OCE is installed in a nonstandard location, add -DOCE_DIR=/path/to/dir/containing/OCEConfig.cmake # when configuring with cmake, i.e. cmake .. -DOCE_DIR=/usr/share/cmake - if( NOT DEFINED OCE_DIR ) - if( UNIX ) - set( OCE_DIR "/usr/local/share/cmake/" ) - else() - set( OCE_DIR "c:/OCE-0.4.0/share/cmake" ) + if( NOT DEFINED USE_OCC ) + if( NOT DEFINED OCE_DIR ) + if( UNIX ) + set( OCE_DIR "/usr/local/share/cmake/" ) + else() + set( OCE_DIR "c:/OCE-0.4.0/share/cmake" ) + endif() endif() + find_package ( OCE ) + else() + set(OCE_FOUND FALSE) + endif() - find_package ( OCE ) - if( ${OCE_FOUND} ) + if( ${OCE_FOUND} AND NOT DEFINED USE_OCC ) message("-- OpenCASCADE Community Edition has been found.") add_definitions ( -DHAVE_CONFIG_H ) set( OCC_LIBRARIES "TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKIGES;TKSTL;TKShHealing;TKXSBase;TKBool;TKBO;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKSTEP;TKSTEPBase;TKSTEPAttr;TKHLR" ) #lib list copied from FreeCAD's FindOpenCasCade.cmake freecad-0.12-pycxx.patch: CMakeLists.txt | 12 +++++ cMake/FindPyCXX.cmake | 107 ++++++++++++++++++++++++++++++++++++++++++++++++ src/Base/CMakeLists.txt | 21 ++------- 3 files changed, 124 insertions(+), 16 deletions(-) --- NEW FILE freecad-0.12-pycxx.patch --- This patch adds an option to FreeCAD's cmake to specify an external PyCXX. PyCXX doesn't really have a standard location, so this will try to guess a couple of places, but best is to specify on the cmake command line: cmake -DPYCXX_INCLUDE_DIR=/usr/include/python2.7 \ -DPYCXX_SOURCE_DIR=/usr/share/python2.7/CXX diff -ruN FreeCAD-0.12.5284.orig/CMakeLists.txt FreeCAD-0.12.5284/CMakeLists.txt --- FreeCAD-0.12.5284.orig/CMakeLists.txt 2012-06-25 01:32:19.000000000 -0500 +++ FreeCAD-0.12.5284/CMakeLists.txt 2012-06-25 01:30:48.000000000 -0500 @@ -86,6 +86,13 @@ SET(RESOURCEDIR "${CMAKE_INSTALL_PREFIX}/data" CACHE PATH "Absolute path to the data directory.") SET(DOCDIR "" CACHE PATH "Absolute path to the documentation directory.") OPTION(USE_EXTERNAL_ZIPIOS "Use system installed zipios++ instead of the bundled." OFF) +SET(PYCXX_INCLUDE_DIR + "${CMAKE_CURRENT_LIST_DIR}/src" CACHE PATH + "Path to the directory containing PyCXX's CXX/Config.hxx include file") +SET(PYCXX_SOURCE_DIR + "${CMAKE_CURRENT_LIST_DIR}/src/CXX" CACHE PATH + "Path to the directory containing PyCXX's cxxextensions.c source file") + # ============================================================================== @@ -158,6 +165,11 @@ find_package(ZLIB REQUIRED) +# -------------------------------- PyCXX -------------------------------- + + find_package(PyCXX REQUIRED) + + # -------------------------------- OpenCasCade -------------------------------- #first, look for OpenCASCADE Community Edition (OCE) diff -ruN FreeCAD-0.12.5284.orig/cMake/FindPyCXX.cmake FreeCAD-0.12.5284/cMake/FindPyCXX.cmake --- FreeCAD-0.12.5284.orig/cMake/FindPyCXX.cmake 1969-12-31 18:00:00.000000000 -0600 +++ FreeCAD-0.12.5284/cMake/FindPyCXX.cmake 2012-06-25 01:30:25.000000000 -0500 @@ -0,0 +1,107 @@ +# Locate PyCXX headers and source files + +# This module defines +# PYCXX_INCLUDE_DIR +# PYCXX_SOURCE_DIR +# PYCXX_FOUND +# PYCXX_SOURCES +# +# The PYCXX_*_DIR variables can be set to tell this module where +# the files are. + + +# There's no standard location for PyCXX. +# +# The authors' example is to put it in "~\" [sic]. +# +# Ubuntu puts the includes into /usr/include/python2.7/CXX and sources into +# /usr/share/python2.7/CXX. +# +# The Zultron Fedora RPM does the same as Ubuntu. + +set(PYCXX_FOUND "YES") + +# find the header directory +if(PYCXX_INCLUDE_DIR) + # headers better be in there + if(NOT EXISTS "${PYCXX_INCLUDE_DIR}/CXX/Config.hxx") + if(PYCXX_FIND_REQUIRED) + MESSAGE(FATAL_ERROR + "PyCXX: could not find CXX/Config.hxx in PYCXX_INCLUDE_DIR " + "${PYCXX_INCLUDE_DIR}") + else(PYCXX_FIND_REQUIRED) + MESSAGE(WARNING + "PyCXX: could not find CXX/Config.hxx in PYCXX_INCLUDE_DIR " + "${PYCXX_INCLUDE_DIR}") + unset(PYCXX_FOUND) + endif(PYCXX_FIND_REQUIRED) + endif(NOT EXISTS "${PYCXX_INCLUDE_DIR}/CXX/Config.hxx") +else(PYCXX_INCLUDE_DIR) + # check in 'standard' places + find_path(PYCXX_INCLUDE_DIR CXX/Config.hxx + ${PYTHON_INCLUDE_DIR} + "${CMAKE_CURRENT_LIST_DIR}/..") + if(NOT PYCXX_INCLUDE_DIR) + if(PYCXX_FIND_REQUIRED) + MESSAGE(FATAL_ERROR + "PyCXX not found; please set PYCXX_INCLUDE_DIR to " + "the location of CXX/Config.hxx") + else(PYCXX_FIND_REQUIRED) + MESSAGE(STATUS "PyCXX not found") + unset(PYCXX_FOUND) + endif(PYCXX_FIND_REQUIRED) + endif(NOT PYCXX_INCLUDE_DIR) +endif(PYCXX_INCLUDE_DIR) + +# find the sources directory +if(PYCXX_SOURCE_DIR) + # source directory specified, they'd better be there + if(NOT EXISTS "${PYCXX_SOURCE_DIR}/cxxextensions.c") + if(PYCXX_FIND_REQUIRED) + MESSAGE(FATAL_ERROR + "PyCXX: cxxextensions.c not found in PYCXX_INCLUDE_DIR " + "${PYCXX_INCLUDE_DIR}") + else(PYCXX_FIND_REQUIRED) + MESSAGE(WARNING + "PyCXX: cxxextensions.c not found in PYCXX_INCLUDE_DIR " + "${PYCXX_INCLUDE_DIR}") + unset(PYCXX_FOUND) + endif(PYCXX_FIND_REQUIRED) + endif(NOT EXISTS "${PYCXX_SOURCE_DIR}/cxxextensions.c") +else(PYCXX_SOURCE_DIR) + # check in 'standard' places + find_path(PYCXX_SOURCE_DIR cxxextensions.c + "${PYCXX_INCLUDE_DIR}/CXX" + "${PYCXX_INCLUDE_DIR}/Src" + "${PYTHON_INCLUDE_DIR}/CXX" + "${PYTHON_INCLUDE_DIR}/Src" + "${CMAKE_CURRENT_LIST_DIR}/../Src" + "${CMAKE_CURRENT_LIST_DIR}/../CXX") + if(NOT PYCXX_SOURCE_DIR) + if(PYCXX_FIND_REQUIRED) + MESSAGE(FATAL_ERROR + "PyCXX not found; please set PYCXX_SOURCE_DIR to " + "the location of cxxextensions.c") + else(PYCXX_FIND_REQUIRED) + MESSAGE(STATUS "PyCXX not found") + unset(PYCXX_FOUND) + endif(PYCXX_FIND_REQUIRED) + endif(NOT PYCXX_SOURCE_DIR) +endif(PYCXX_SOURCE_DIR) + +# see what we've got +if(PYCXX_FOUND) + MESSAGE(STATUS "PyCXX found:") + MESSAGE(STATUS " Headers: ${PYCXX_INCLUDE_DIR}") + MESSAGE(STATUS " Sources: ${PYCXX_SOURCE_DIR}") + + # Build the list of sources for convenience + set(PYCXX_SOURCES + ${PYCXX_SOURCE_DIR}/cxxextensions.c + ${PYCXX_SOURCE_DIR}/cxx_extensions.cxx + ${PYCXX_SOURCE_DIR}/cxxsupport.cxx + ${PYCXX_SOURCE_DIR}/IndirectPythonInterface.cxx + ) +else(PYCXX_FOUND) + MESSAGE(STATUS "PyCXX not found") +endif(PYCXX_FOUND) diff -ruN FreeCAD-0.12.5284.orig/src/Base/CMakeLists.txt FreeCAD-0.12.5284/src/Base/CMakeLists.txt --- FreeCAD-0.12.5284.orig/src/Base/CMakeLists.txt 2012-06-25 01:32:18.000000000 -0500 +++ FreeCAD-0.12.5284/src/Base/CMakeLists.txt 2012-06-25 01:31:09.000000000 -0500 @@ -121,21 +121,6 @@ ) SOURCE_GROUP("zipios" FILES ${zipios_SRCS}) -SET(pycxx_SRCS - ../CXX/Config.hxx - ../CXX/cxxextensions.c - ../CXX/cxx_extensions.cxx - ../CXX/cxxsupport.cxx - ../CXX/Exception.hxx - ../CXX/Extensions.hxx - ../CXX/IndirectPythonInterface.cxx - ../CXX/IndirectPythonInterface.hxx - ../CXX/Objects.hxx - ../CXX/Version.hxx - ../CXX/WrapPython.h -) -SOURCE_GROUP("pycxx" FILES ${pycxx_SRCS}) - SET(FreeCADBase_XML_SRCS BaseClassPy.xml BoundBoxPy.xml @@ -269,7 +254,6 @@ ) SET(FreeCADBase_SRCS - ${pycxx_SRCS} ${FreeCADBase_CPP_SRCS} ${FreeCADBase_HPP_SRCS} ${FreeCADBase_XML_SRCS} @@ -301,6 +285,11 @@ endif(USE_EXTERNAL_ZIPIOS) +include_directories(${PYCXX_INCLUDE_DIR}) +list(APPEND FreeCADBase_SRCS ${PYCXX_SOURCES}) +SOURCE_GROUP("pycxx" FILES ${PYCXX_SOURCES}) + + if(MSVC) add_definitions(-D_PreComp_) ADD_MSVC_PRECOMPILED_HEADER("PreCompiled.h" "PreCompiled.cpp" FreeCADBase_CPP_SRCS) freecad-0.12-rm_f2c.patch: CMakeLists.txt | 6 ------ 1 file changed, 6 deletions(-) --- NEW FILE freecad-0.12-rm_f2c.patch --- diff -Naur FreeCAD-0.12.5284.orig/CMakeLists.txt FreeCAD-0.12.5284/CMakeLists.txt --- FreeCAD-0.12.5284.orig/CMakeLists.txt 2012-07-05 08:47:37.921080779 -0500 +++ FreeCAD-0.12.5284/CMakeLists.txt 2012-07-05 15:28:53.615339177 -0500 @@ -204,12 +204,6 @@ ENDIF() endif() -# -------------------------------- f2c ---------------------------------- - - IF(OCC_FOUND) - find_package(F2C REQUIRED) - ENDIF(OCC_FOUND) - # -------------------------------- Salome SMESH -------------------------- # Salome SMESH sources are under src/3rdParty now freecad-0.12-zipios.patch: CMakeLists.txt | 1 + src/Base/CMakeLists.txt | 22 +++++++++++++++++++++- 2 files changed, 22 insertions(+), 1 deletion(-) --- NEW FILE freecad-0.12-zipios.patch --- diff -Naur FreeCAD-0.12.5284.orig/CMakeLists.txt FreeCAD-0.12.5284/CMakeLists.txt --- FreeCAD-0.12.5284.orig/CMakeLists.txt 2012-04-08 07:23:26.474216557 -0500 +++ FreeCAD-0.12.5284/CMakeLists.txt 2012-04-08 19:14:13.606167248 -0500 @@ -85,6 +85,7 @@ OPTION(FREECAD_BUILD_SANDBOX "Build the FreeCAD Sandbox module which is only for testing purposes" OFF) SET(RESOURCEDIR "${CMAKE_INSTALL_PREFIX}/data" CACHE PATH "Absolute path to the data directory.") SET(DOCDIR "" CACHE PATH "Absolute path to the documentation directory.") +OPTION(USE_EXTERNAL_ZIPIOS "Use system installed zipios++ instead of the bundled." OFF) # ============================================================================== diff -Naur FreeCAD-0.12.5284.orig/src/Base/CMakeLists.txt FreeCAD-0.12.5284/src/Base/CMakeLists.txt --- FreeCAD-0.12.5284.orig/src/Base/CMakeLists.txt 2012-04-08 07:23:26.514215262 -0500 +++ FreeCAD-0.12.5284/src/Base/CMakeLists.txt 2012-04-08 19:12:39.956997353 -0500 @@ -269,7 +269,6 @@ ) SET(FreeCADBase_SRCS - ${zipios_SRCS} ${pycxx_SRCS} ${FreeCADBase_CPP_SRCS} ${FreeCADBase_HPP_SRCS} @@ -281,6 +280,27 @@ PreCompiled.h ) +# Use external zipios++ if specified. +if(USE_EXTERNAL_ZIPIOS) + find_library(ZIPIOS_LIBRARY zipios) + find_path(ZIPIOS_INCLUDES zipios++/zipios-config.h) + if(ZIPIOS_LIBRARY) + message(STATUS "Found zipios++: ${ZIPIOS}") + endif() + if(ZIPIOS_INCLUDES) + message(STATUS "Found zipios++ headers.") + endif() + if(ZIPIOS_LIBRARY AND ZIPIOS_INCLUDES) + list(APPEND FreeCADBase_LIBS ${ZIPIOS_LIBRARY}) + include_directories(${ZIPIOS_INCLUDES}) + else() + message(FATAL_ERROR "Using external zipios++ was specified but was not found.") + endif() +else(USE_EXTERNAL_ZIPIOS) + list(APPEND FreeCADBase_SRCS ${zipios_SRCS}) +endif(USE_EXTERNAL_ZIPIOS) + + if(MSVC) add_definitions(-D_PreComp_) ADD_MSVC_PRECOMPILED_HEADER("PreCompiled.h" "PreCompiled.cpp" FreeCADBase_CPP_SRCS) freecad-3rdParty.patch: CMakeLists.txt | 1 - 1 file changed, 1 deletion(-) --- NEW FILE freecad-3rdParty.patch --- diff -Naur freecad-0.12-svn5325.orig/src/CMakeLists.txt freecad-0.12-svn5325/src/CMakeLists.txt --- freecad-0.12-svn5325.orig/src/CMakeLists.txt 2011-03-03 09:57:25.000000000 -0600 +++ freecad-0.12-svn5325/src/CMakeLists.txt 2011-12-21 10:58:18.396896819 -0600 @@ -1,6 +1,5 @@ add_subdirectory(Build) -add_subdirectory(3rdParty) add_subdirectory(Base) add_subdirectory(App) add_subdirectory(Main) freecad-StartPage.patch: CMakeLists.txt | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) --- NEW FILE freecad-StartPage.patch --- diff -Naur freecad-svn5184.orig/src/Mod/Start/StartPage/CMakeLists.txt freecad-svn5184.mod/src/Mod/Start/StartPage/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Start/StartPage/CMakeLists.txt 1969-12-31 18:00:00.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Start/StartPage/CMakeLists.txt 2011-11-30 19:07:40.962208203 -0600 @@ -0,0 +1,31 @@ +SET(StartPage_SRCS + StartPage.py + __init__.py +) + +SET(StartPage_DATA + ArchDesign.py + DefaultWorkbench.py + LoadDrawingExample.py + LoadPartDesignExample.py + LoadRobotExample.py + LoadSchenkel.py + LoadMRU0.py + LoadMRU1.py + LoadMRU2.py + Mesh.py + PartDesign.py + Background.jpg + FreeCAD.png + PartDesign.png + ArchDesign.png + Mesh.png + Complete.png + PartDesignExample.png + ArchExample.png + web.png +) + +INSTALL(FILES ${StartPage_SRCS} ${StartPage_DATA} + DESTINATION Mod/Start/StartPage +) freecad-cmake_Mod_fix.patch: CMakeLists.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- NEW FILE freecad-cmake_Mod_fix.patch --- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/CMakeLists.txt FreeCAD-0.12.5284/src/Mod/CMakeLists.txt --- FreeCAD-0.12.5284.orig/src/Mod/CMakeLists.txt 2012-01-03 06:26:12.000000000 -0600 +++ FreeCAD-0.12.5284/src/Mod/CMakeLists.txt 2012-01-04 11:39:26.918349340 -0600 @@ -18,7 +18,7 @@ MESSAGE("Due to the missing Eigen3 library the Sketcher module won't be built") MESSAGE("Due to the missing Eigen3 library the Robot module won't be built") ENDIF(EIGEN3_FOUND) -add_subdirectory(Machining_Distortion) +#add_subdirectory(Machining_Distortion) add_subdirectory(ReverseEngineering) add_subdirectory(MeshPart) @@ -32,7 +32,7 @@ add_subdirectory(Arch) -add_subdirectory(Assembly) +#add_subdirectory(Assembly) if(FREECAD_BUILD_CAM) add_subdirectory(Cam) freecad-gcc-4.7.patch: Fem/App/HypothesisPy.cpp | 18 +++++++++--------- Mesh/App/WildMagic4/Wm4Query2.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query2Filtered.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query2Int64.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query2TInteger.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query2TRational.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query3.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query3Filtered.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query3Int64.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query3TInteger.inl | 4 ++-- Mesh/App/WildMagic4/Wm4Query3TRational.inl | 4 ++-- 11 files changed, 29 insertions(+), 29 deletions(-) --- NEW FILE freecad-gcc-4.7.patch --- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Fem/App/HypothesisPy.cpp FreeCAD-0.12.5284/src/Mod/Fem/App/HypothesisPy.cpp --- FreeCAD-0.12.5284.orig/src/Mod/Fem/App/HypothesisPy.cpp 2012-05-24 19:42:01.240612805 -0700 +++ FreeCAD-0.12.5284/src/Mod/Fem/App/HypothesisPy.cpp 2012-05-24 20:20:50.307192529 -0700 @@ -85,15 +85,15 @@ SMESH_HypothesisPy<T>::behaviors().supportSetattr(); SMESH_HypothesisPy<T>::behaviors().type_object()->tp_new = &PyMake; - add_varargs_method("setLibName", &SMESH_HypothesisPy<T>::setLibName, "setLibName(String)"); - add_varargs_method("getLibName", &SMESH_HypothesisPy<T>::getLibName, "String getLibName()"); - add_varargs_method("setParameters", &SMESH_HypothesisPy<T>::setParameters, "setParameters(String)"); - add_varargs_method("getParameters", &SMESH_HypothesisPy<T>::getParameters, "String getParameters()"); - add_varargs_method("setLastParameters", &SMESH_HypothesisPy<T>::setLastParameters, "setLastParameters(String)"); - add_varargs_method("getLastParameters", &SMESH_HypothesisPy<T>::getLastParameters, "String getLastParameters()"); - add_varargs_method("clearParameters", &SMESH_HypothesisPy<T>::clearParameters, "clearParameters()"); - add_varargs_method("isAuxiliary", &SMESH_HypothesisPy<T>::isAuxiliary, "Bool isAuxiliary()"); - add_varargs_method("setParametersByMesh", &SMESH_HypothesisPy<T>::setParametersByMesh, "setParametersByMesh(Mesh,Shape)"); + SMESH_HypothesisPy::add_varargs_method("setLibName", &SMESH_HypothesisPy<T>::setLibName, "setLibName(String)"); + SMESH_HypothesisPy::add_varargs_method("getLibName", &SMESH_HypothesisPy<T>::getLibName, "String getLibName()"); + SMESH_HypothesisPy::add_varargs_method("setParameters", &SMESH_HypothesisPy<T>::setParameters, "setParameters(String)"); + SMESH_HypothesisPy::add_varargs_method("getParameters", &SMESH_HypothesisPy<T>::getParameters, "String getParameters()"); + SMESH_HypothesisPy::add_varargs_method("setLastParameters", &SMESH_HypothesisPy<T>::setLastParameters, "setLastParameters(String)"); + SMESH_HypothesisPy::add_varargs_method("getLastParameters", &SMESH_HypothesisPy<T>::getLastParameters, "String getLastParameters()"); + SMESH_HypothesisPy::add_varargs_method("clearParameters", &SMESH_HypothesisPy<T>::clearParameters, "clearParameters()"); + SMESH_HypothesisPy::add_varargs_method("isAuxiliary", &SMESH_HypothesisPy<T>::isAuxiliary, "Bool isAuxiliary()"); + SMESH_HypothesisPy::add_varargs_method("setParametersByMesh", &SMESH_HypothesisPy<T>::setParametersByMesh, "setParametersByMesh(Mesh,Shape)"); Base::Interpreter().addType(SMESH_HypothesisPy<T>::behaviors().type_object(), module,SMESH_HypothesisPy<T>::behaviors().getName()); } diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2Filtered.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2Filtered.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2Filtered.inl 2012-05-24 19:42:01.191614365 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2Filtered.inl 2012-05-24 20:20:50.307192529 -0700 @@ -55,7 +55,7 @@ Real fLen1 = Math<Real>::Sqrt(fX1*fX1 + fY1*fY1); Real fScaledUncertainty = m_fUncertainty*fLen0*fLen1; - Real fDet2 = Det2(fX0,fY0,fX1,fY1); + Real fDet2 = this->Det2(fX0,fY0,fX1,fY1); if (Math<Real>::FAbs(fDet2) >= fScaledUncertainty) { return (fDet2 > (Real)0.0 ? +1 : (fDet2 < (Real)0.0 ? -1 : 0)); @@ -93,7 +93,7 @@ Real fLen2 = Math<Real>::Sqrt(fD2x*fD2x + fD2y*fD2y + fZ2*fZ2); Real fScaledUncertainty = m_fUncertainty*fLen0*fLen1*fLen2; - Real fDet3 = Det3(fD0x,fD0y,fZ0,fD1x,fD1y,fZ1,fD2x,fD2y,fZ2); + Real fDet3 = this->Det3(fD0x,fD0y,fZ0,fD1x,fD1y,fZ1,fD2x,fD2y,fZ2); if (Math<Real>::FAbs(fDet3) >= fScaledUncertainty) { return (fDet3 < (Real)0.0 ? 1 : (fDet3 > (Real)0.0 ? -1 : 0)); diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2.inl 2012-05-24 19:42:01.193614301 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2.inl 2012-05-24 20:20:50.307192529 -0700 @@ -65,7 +65,7 @@ Real fX1 = rkV1[0] - rkV0[0]; Real fY1 = rkV1[1] - rkV0[1]; - Real fDet2 = Det2(fX0,fY0,fX1,fY1); + Real fDet2 = this->Det2(fX0,fY0,fX1,fY1); return (fDet2 > (Real)0.0 ? +1 : (fDet2 < (Real)0.0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -129,7 +129,7 @@ Real fZ0 = fS0x*fD0x + fS0y*fD0y; Real fZ1 = fS1x*fD1x + fS1y*fD1y; Real fZ2 = fS2x*fD2x + fS2y*fD2y; - Real fDet3 = Det3(fD0x,fD0y,fZ0,fD1x,fD1y,fZ1,fD2x,fD2y,fZ2); + Real fDet3 = this->Det3(fD0x,fD0y,fZ0,fD1x,fD1y,fZ1,fD2x,fD2y,fZ2); return (fDet3 < (Real)0.0 ? 1 : (fDet3 > (Real)0.0 ? -1 : 0)); } //---------------------------------------------------------------------------- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2Int64.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2Int64.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2Int64.inl 2012-05-24 19:42:01.194614269 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2Int64.inl 2012-05-24 20:20:50.307192529 -0700 @@ -42,7 +42,7 @@ Integer64 iX1 = (Integer64)rkV1[0] - (Integer64)rkV0[0]; Integer64 iY1 = (Integer64)rkV1[1] - (Integer64)rkV0[1]; - Integer64 iDet2 = Det2(iX0,iY0,iX1,iY1); + Integer64 iDet2 = this->Det2(iX0,iY0,iX1,iY1); return (iDet2 > 0 ? +1 : (iDet2 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -74,7 +74,7 @@ Integer64 iZ0 = iS0x*iD0x + iS0y*iD0y; Integer64 iZ1 = iS1x*iD1x + iS1y*iD1y; Integer64 iZ2 = iS2x*iD2x + iS2y*iD2y; - Integer64 iDet3 = Det3(iD0x,iD0y,iZ0,iD1x,iD1y,iZ1,iD2x,iD2y,iZ2); + Integer64 iDet3 = this->Det3(iD0x,iD0y,iZ0,iD1x,iD1y,iZ1,iD2x,iD2y,iZ2); return (iDet3 < 0 ? 1 : (iDet3 > 0 ? -1 : 0)); } //---------------------------------------------------------------------------- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2TInteger.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2TInteger.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2TInteger.inl 2012-05-24 19:42:01.191614365 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2TInteger.inl 2012-05-24 20:20:50.307192529 -0700 @@ -43,7 +43,7 @@ TInteger<2> kX1((int)rkV1[0] - (int)rkV0[0]); TInteger<2> kY1((int)rkV1[1] - (int)rkV0[1]); - TInteger<2> kDet2 = Det2(kX0,kY0,kX1,kY1); + TInteger<2> kDet2 = this->Det2(kX0,kY0,kX1,kY1); return (kDet2 > 0 ? +1 : (kDet2 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -75,7 +75,7 @@ TInteger<4> kZ0 = kS0x*kD0x + kS0y*kD0y; TInteger<4> kZ1 = kS1x*kD1x + kS1y*kD1y; TInteger<4> kZ2 = kS2x*kD2x + kS2y*kD2y; - TInteger<4> kDet3 = Det3(kD0x,kD0y,kZ0,kD1x,kD1y,kZ1,kD2x,kD2y,kZ2); + TInteger<4> kDet3 = this->Det3(kD0x,kD0y,kZ0,kD1x,kD1y,kZ1,kD2x,kD2y,kZ2); return (kDet3 < 0 ? 1 : (kDet3 > 0 ? -1 : 0)); } //---------------------------------------------------------------------------- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2TRational.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2TRational.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query2TRational.inl 2012-05-24 19:42:01.190614397 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query2TRational.inl 2012-05-24 20:20:50.307192529 -0700 @@ -127,7 +127,7 @@ Rational kX1 = m_akRVertex[iV1][0] - m_akRVertex[iV0][0]; Rational kY1 = m_akRVertex[iV1][1] - m_akRVertex[iV0][1]; - Rational kDet2 = Det2(kX0,kY0,kX1,kY1); + Rational kDet2 = this->Det2(kX0,kY0,kX1,kY1); return (kDet2 > 0 ? +1 : (kDet2 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -179,7 +179,7 @@ Rational kZ0 = kS0x*kD0x + kS0y*kD0y; Rational kZ1 = kS1x*kD1x + kS1y*kD1y; Rational kZ2 = kS2x*kD2x + kS2y*kD2y; - Rational kDet3 = Det3(kD0x,kD0y,kZ0,kD1x,kD1y,kZ1,kD2x,kD2y,kZ2); + Rational kDet3 = this->Det3(kD0x,kD0y,kZ0,kD1x,kD1y,kZ1,kD2x,kD2y,kZ2); return (kDet3 < 0 ? 1 : (kDet3 > 0 ? -1 : 0)); } //---------------------------------------------------------------------------- diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3Filtered.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3Filtered.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3Filtered.inl 2012-05-24 19:42:01.190614397 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3Filtered.inl 2012-05-24 20:21:28.563013748 -0700 @@ -62,7 +62,7 @@ Real fLen2 = Math<Real>::Sqrt(fX2*fX2 + fY2*fY2 + fZ2*fZ2); Real fScaledUncertainty = m_fUncertainty*fLen0*fLen1*fLen2; - Real fDet3 = Det3(fX0,fY0,fZ0,fX1,fY1,fZ1,fX2,fY2,fZ2); + Real fDet3 = this->Det3(fX0,fY0,fZ0,fX1,fY1,fZ1,fX2,fY2,fZ2); if (Math<Real>::FAbs(fDet3) >= fScaledUncertainty) { return (fDet3 > (Real)0.0 ? +1 : (fDet3 < (Real)0.0 ? -1 : 0)); @@ -115,7 +115,7 @@ Real fLen3 = Math<Real>::Sqrt(fD3x*fD3x+fD3y*fD3y+fD3z*fD3z+fW3*fW3); Real fScaledUncertainty = m_fUncertainty*fLen0*fLen1*fLen2*fLen3; - Real fDet4 = Det4(fD0x,fD0y,fD0z,fW0,fD1x,fD1y,fD1z,fW1,fD2x, + Real fDet4 = this->Det4(fD0x,fD0y,fD0z,fW0,fD1x,fD1y,fD1z,fW1,fD2x, fD2y,fD2z,fW2,fD3x,fD3y,fD3z,fW3); if (Math<Real>::FAbs(fDet4) >= fScaledUncertainty) diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3.inl 2012-05-24 19:42:01.193614301 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3.inl 2012-05-24 20:21:32.913879668 -0700 @@ -72,7 +72,7 @@ Real fY2 = rkV2[1] - rkV0[1]; Real fZ2 = rkV2[2] - rkV0[2]; - Real fDet3 = Det3(fX0,fY0,fZ0,fX1,fY1,fZ1,fX2,fY2,fZ2); + Real fDet3 = this->Det3(fX0,fY0,fZ0,fX1,fY1,fZ1,fX2,fY2,fZ2); return (fDet3 > (Real)0.0 ? +1 : (fDet3 < (Real)0.0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -158,7 +158,7 @@ Real fW1 = fS1x*fD1x + fS1y*fD1y + fS1z*fD1z; Real fW2 = fS2x*fD2x + fS2y*fD2y + fS2z*fD2z; Real fW3 = fS3x*fD3x + fS3y*fD3y + fS3z*fD3z; - Real fDet4 = Det4(fD0x,fD0y,fD0z,fW0,fD1x,fD1y,fD1z,fW1,fD2x, + Real fDet4 = this->Det4(fD0x,fD0y,fD0z,fW0,fD1x,fD1y,fD1z,fW1,fD2x, fD2y,fD2z,fW2,fD3x,fD3y,fD3z,fW3); return (fDet4 > (Real)0.0 ? 1 : (fDet4 < (Real)0.0 ? -1 : 0)); diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3Int64.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3Int64.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3Int64.inl 2012-05-24 19:42:01.189614429 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3Int64.inl 2012-05-24 20:21:36.845758502 -0700 @@ -48,7 +48,7 @@ Integer64 iY2 = (Integer64)rkV2[1] - (Integer64)rkV0[1]; Integer64 iZ2 = (Integer64)rkV2[2] - (Integer64)rkV0[2]; - Integer64 iDet3 = Det3(iX0,iY0,iZ0,iX1,iY1,iZ1,iX2,iY2,iZ2); + Integer64 iDet3 = this->Det3(iX0,iY0,iZ0,iX1,iY1,iZ1,iX2,iY2,iZ2); return (iDet3 > 0 ? +1 : (iDet3 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -100,7 +100,7 @@ Integer64 iW1 = iS1x*iD1x + iS1y*iD1y + iS1z*iD1z; Integer64 iW2 = iS2x*iD2x + iS2y*iD2y + iS2z*iD2z; Integer64 iW3 = iS3x*iD3x + iS3y*iD3y + iS3z*iD3z; - Integer64 iDet4 = Det4(iD0x,iD0y,iD0z,iW0,iD1x,iD1y,iD1z,iW1,iD2x, + Integer64 iDet4 = this->Det4(iD0x,iD0y,iD0z,iW0,iD1x,iD1y,iD1z,iW1,iD2x, iD2y,iD2z,iW2,iD3x,iD3y,iD3z,iW3); return (iDet4 > 0 ? 1 : (iDet4 < 0 ? -1 : 0)); diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3TInteger.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3TInteger.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3TInteger.inl 2012-05-24 19:42:01.192614333 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3TInteger.inl 2012-05-24 20:21:48.905386855 -0700 @@ -49,7 +49,7 @@ TInteger<4> kY2((int)rkV2[1] - (int)rkV0[1]); TInteger<4> kZ2((int)rkV2[2] - (int)rkV0[2]); - TInteger<4> kDet3 = Det3(kX0,kY0,kZ0,kX1,kY1,kZ1,kX2,kY2,kZ2); + TInteger<4> kDet3 = this->Det3(kX0,kY0,kZ0,kX1,kY1,kZ1,kX2,kY2,kZ2); return (kDet3 > 0 ? +1 : (kDet3 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -96,7 +96,7 @@ TInteger<6> kW1 = kS1x*kD1x + kS1y*kD1y + kS1z*kD1z; TInteger<6> kW2 = kS2x*kD2x + kS2y*kD2y + kS2z*kD2z; TInteger<6> kW3 = kS3x*kD3x + kS3y*kD3y + kS3z*kD3z; - TInteger<6> kDet4 = Det4(kD0x,kD0y,kD0z,kW0,kD1x,kD1y,kD1z,kW1,kD2x,kD2y, + TInteger<6> kDet4 = this->Det4(kD0x,kD0y,kD0z,kW0,kD1x,kD1y,kD1z,kW1,kD2x,kD2y, kD2z,kW2,kD3x,kD3y,kD3z,kW3); return (kDet4 > 0 ? 1 : (kDet4 < 0 ? -1 : 0)); diff -Naur FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3TRational.inl FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3TRational.inl --- FreeCAD-0.12.5284.orig/src/Mod/Mesh/App/WildMagic4/Wm4Query3TRational.inl 2012-05-24 19:42:01.189614429 -0700 +++ FreeCAD-0.12.5284/src/Mod/Mesh/App/WildMagic4/Wm4Query3TRational.inl 2012-05-24 20:21:41.135626300 -0700 @@ -136,7 +136,7 @@ Rational kY2 = m_akRVertex[iV2][1] - m_akRVertex[iV0][1]; Rational kZ2 = m_akRVertex[iV2][2] - m_akRVertex[iV0][2]; - Rational kDet3 = Det3(kX0,kY0,kZ0,kX1,kY1,kZ1,kX2,kY2,kZ2); + Rational kDet3 = this->Det3(kX0,kY0,kZ0,kX1,kY1,kZ1,kX2,kY2,kZ2); return (kDet3 > 0 ? +1 : (kDet3 < 0 ? -1 : 0)); } //---------------------------------------------------------------------------- @@ -208,7 +208,7 @@ Rational kW1 = kS1x*kD1x + kS1y*kD1y + kS1z*kD1z; Rational kW2 = kS2x*kD2x + kS2y*kD2y + kS2z*kD2z; Rational kW3 = kS3x*kD3x + kS3y*kD3y + kS3z*kD3z; - Rational kDet4 = Det4(kD0x,kD0y,kD0z,kW0,kD1x,kD1y,kD1z,kW1,kD2x, + Rational kDet4 = this->Det4(kD0x,kD0y,kD0z,kW0,kD1x,kD1y,kD1z,kW1,kD2x, kD2y,kD2z,kW2,kD3x,kD3y,kD3z,kW3); return (kDet4 > 0 ? 1 : (kDet4 < 0 ? -1 : 0)); freecad-glu.patch: GLImageBox.cpp | 1 + 1 file changed, 1 insertion(+) --- NEW FILE freecad-glu.patch --- diff -Naur freecad-0.12.orig/src/Mod/Image/Gui/GLImageBox.cpp freecad-0.12/src/Mod/Image/Gui/GLImageBox.cpp --- freecad-0.12.orig/src/Mod/Image/Gui/GLImageBox.cpp 2010-02-18 05:03:53.000000000 -0600 +++ freecad-0.12/src/Mod/Image/Gui/GLImageBox.cpp 2012-01-01 16:49:09.041859287 -0600 @@ -27,6 +27,7 @@ # include <GL/glext.h> #endif +#include <GL/glu.h> #include "GLImageBox.h" using namespace ImageGui; freecad-system_inst.patch: freecad-svn5184.mod/CMakeLists.txt | 15 +-- freecad-svn5184.mod/data/examples/CMakeLists.txt | 2 freecad-svn5184.mod/src/App/CMakeLists.txt | 8 + freecad-svn5184.mod/src/Base/CMakeLists.txt | 3 freecad-svn5184.mod/src/Doc/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Arch/CMakeLists.txt | 8 - freecad-svn5184.mod/src/Mod/Complete/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Complete/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Draft/CMakeLists.txt | 6 - freecad-svn5184.mod/src/Mod/Drawing/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Drawing/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Drawing/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Fem/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Fem/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Fem/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Idf/CMakeLists.txt | 10 -- freecad-svn5184.mod/src/Mod/Image/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Image/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Image/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Import/CMakeLists.txt | 4 freecad-svn5184.mod/src/Mod/Import/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Inspection/App/CMakeLists.txt | 5 - freecad-svn5184.mod/src/Mod/Inspection/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Inspection/Gui/CMakeLists.txt | 47 +++++----- freecad-svn5184.mod/src/Mod/Mesh/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Mesh/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Mesh/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/MeshPart/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/MeshPart/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/MeshPart/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Part/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Part/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Part/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/PartDesign/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/PartDesign/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/PartDesign/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Points/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Points/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Points/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Raytracing/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Raytracing/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Raytracing/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/ReverseEngineering/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/ReverseEngineering/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Robot/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Robot/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Robot/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Sandbox/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Sandbox/CMakeLists.txt | 12 +- freecad-svn5184.mod/src/Mod/Sandbox/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Sketcher/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Sketcher/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Sketcher/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Start/App/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Start/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Start/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/TemplatePyMod/CMakeLists.txt | 21 ++-- freecad-svn5184.mod/src/Mod/Test/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Test/Gui/CMakeLists.txt | 3 freecad-svn5184.mod/src/Mod/Web/CMakeLists.txt | 2 freecad-svn5184.mod/src/Mod/Web/Gui/CMakeLists.txt | 3 freecad-svn5220/src/App/CMakeLists.txt | 3 freecad-svn5220/src/Base/CMakeLists.txt | 4 freecad-svn5220/src/Gui/CMakeLists.txt | 1 freecad-svn5220/src/Main/CMakeLists.txt | 7 + freecad-svn5220/src/Mod/Complete/Gui/CMakeLists.txt | 1 freecad-svn5220/src/Mod/ReverseEngineering/Gui/CMakeLists.txt | 3 67 files changed, 171 insertions(+), 119 deletions(-) --- NEW FILE freecad-system_inst.patch --- diff -Naur freecad-svn5184.orig/CMakeLists.txt freecad-svn5184.mod/CMakeLists.txt --- freecad-svn5184.orig/CMakeLists.txt 2011-11-30 09:36:58.969275770 -0600 +++ freecad-svn5184.mod/CMakeLists.txt 2011-11-30 16:07:00.353807219 -0600 @@ -61,11 +61,12 @@ if(WIN32) SET(CMAKE_INSTALL_PREFIX ${CMAKE_BINARY_DIR}) else(WIN32) -# SET(CMAKE_INSTALL_PREFIX "/usr/lib/freecad") + SET(CMAKE_INSTALL_PREFIX "/usr/lib${LIB_SUFFIX}/freecad") + SET(INSTALL_RPATH "${CMAKE_INSTALL_PREFIX}/lib") endif(WIN32) -# ================================================================================ -# == Win32 is default behaviour use the LibPack copied in Source tree ============ +# ============================================================================== +# == Win32 is default behaviour use the LibPack copied in Source tree ========== if(MSVC) OPTION(FREECAD_LIBPACK_USE "Use the LibPack to Build FreeCAD (only Win32 so far)." ON) set(FREECAD_LIBPACK_DIR ${CMAKE_SOURCE_DIR} CACHE PATH "Directory of the FreeCAD LibPack") @@ -74,7 +75,7 @@ set(FREECAD_LIBPACK_DIR "" CACHE PATH "Directory of the FreeCAD LibPack") endif(MSVC) -# ================================================================================ +# ============================================================================== # == All the options for the build process ============ OPTION(FREECAD_BUILD_GUI "Build FreeCAD Gui. Otherwise you have only the command line and the Python import module." ON) @@ -82,10 +83,10 @@ OPTION(FREECAD_BUILD_CAM "Build the FreeCAD CAM module and the needed libs, be aware, unfinished code!" OFF) OPTION(FREECAD_BUILD_FEM "Build the FreeCAD FEM module, be aware, unfinished code!" ON) OPTION(FREECAD_BUILD_SANDBOX "Build the FreeCAD Sandbox module which is only for testing purposes" OFF) +SET(RESOURCEDIR "${CMAKE_INSTALL_PREFIX}/data" CACHE PATH "Absolute path to the data directory.") +SET(DOCDIR "" CACHE PATH "Absolute path to the documentation directory.") - - -# ================================================================================ +# ============================================================================== if(FREECAD_LIBPACK_USE) # checking for a unique file in LibPack location to make sure the right version of the LibPack is there diff -Naur freecad-svn5184.orig/data/examples/CMakeLists.txt freecad-svn5184.mod/data/examples/CMakeLists.txt --- freecad-svn5184.orig/data/examples/CMakeLists.txt 2011-05-24 14:02:32.000000000 -0500 +++ freecad-svn5184.mod/data/examples/CMakeLists.txt 2011-11-30 11:56:01.050240955 -0600 @@ -12,7 +12,7 @@ fc_copy_sources("data/examples" "Examples" ${Examples_Files}) -install( +INSTALL( FILES ${Examples_Files} DESTINATION diff -Naur freecad-svn5184.orig/src/App/CMakeLists.txt freecad-svn5184.mod/src/App/CMakeLists.txt --- freecad-svn5184.orig/src/App/CMakeLists.txt 2011-06-14 09:11:52.000000000 -0500 +++ freecad-svn5184.mod/src/App/CMakeLists.txt 2011-11-30 16:08:36.464683016 -0600 @@ -3,6 +3,14 @@ add_definitions(-DBOOST_DYN_LINK) endif(WIN32) +IF(RESOURCEDIR) + add_definitions(-DRESOURCEDIR="${RESOURCEDIR}") +ENDIF(RESOURCEDIR) + +IF(DOCDIR) + add_definitions(-DDOCDIR="${DOCDIR}") +ENDIF(DOCDIR) + include_directories( ${CMAKE_BINARY_DIR}/src ${CMAKE_SOURCE_DIR}/src diff -Naur freecad-svn5184.orig/src/Base/CMakeLists.txt freecad-svn5184.mod/src/Base/CMakeLists.txt --- freecad-svn5184.orig/src/Base/CMakeLists.txt 2011-01-26 05:56:38.000000000 -0600 +++ freecad-svn5184.mod/src/Base/CMakeLists.txt 2011-11-30 10:45:20.128198748 -0600 @@ -309,6 +309,9 @@ LIBRARY DESTINATION lib ) else(WIN32) + set_target_properties(FreeCADBase + PROPERTIES INSTALL_RPATH ${INSTALL_RPATH} + ) INSTALL(TARGETS FreeCADBase LIBRARY DESTINATION lib ) diff -Naur freecad-svn5184.orig/src/Doc/CMakeLists.txt freecad-svn5184.mod/src/Doc/CMakeLists.txt --- freecad-svn5184.orig/src/Doc/CMakeLists.txt 2011-01-28 08:38:53.000000000 -0600 +++ freecad-svn5184.mod/src/Doc/CMakeLists.txt 2011-11-30 10:38:04.225248987 -0600 @@ -1,5 +1,5 @@ find_package(Doxygen) -if( DOXYGEN_FOUND) +if(DOXYGEN_FOUND) IF (DOXYGEN_DOT_EXECUTABLE) SET(HAVE_DOT YES) diff -Naur freecad-svn5184.orig/src/Mod/Arch/CMakeLists.txt freecad-svn5184.mod/src/Mod/Arch/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Arch/CMakeLists.txt 2011-10-14 11:48:44.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Arch/CMakeLists.txt 2011-11-30 11:57:29.541317665 -0600 @@ -30,9 +30,7 @@ fc_copy_sources("Mod/Arch" "Arch" ${all_files}) -install( - FILES - ${Arch_SRCS} - DESTINATION - Mod/Arch +INSTALL( + FILES ${Arch_SRCS} + DESTINATION Mod/Arch ) diff -Naur freecad-svn5184.orig/src/Mod/Complete/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Complete/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Complete/App/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Complete/App/CMakeLists.txt 2011-11-30 11:00:47.662045120 -0600 @@ -38,6 +38,7 @@ else(MSVC) set_target_properties(Complete PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Complete) set_target_properties(Complete PROPERTIES PREFIX "") + set_target_properties(Complete PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Complete DESTINATION lib) +INSTALL(TARGETS Complete DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Complete/CMakeLists.txt freecad-svn5184.mod/src/Mod/Complete/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Complete/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Complete/CMakeLists.txt 2011-11-30 10:57:26.092627644 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Draft/CMakeLists.txt freecad-svn5184.mod/src/Mod/Draft/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Draft/CMakeLists.txt 2011-02-02 09:56:18.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Draft/CMakeLists.txt 2011-11-30 11:03:20.932041683 -0600 @@ -34,14 +34,14 @@ fc_copy_sources("Mod/Draft" "Draft" ${all_files}) -install( + +INSTALL( FILES ${DraftLibs_SRCS} DESTINATION Mod/Draft/draftlibs ) - -install( +INSTALL( FILES ${Draft_SRCS} DESTINATION diff -Naur freecad-svn5184.orig/src/Mod/Drawing/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Drawing/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Drawing/App/CMakeLists.txt 2011-11-17 04:31:04.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Drawing/App/CMakeLists.txt 2011-11-30 12:03:31.686356774 -0600 @@ -85,6 +85,7 @@ else(MSVC) set_target_properties(Drawing PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Drawing) set_target_properties(Drawing PROPERTIES PREFIX "") + set_target_properties(Drawing PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Drawing DESTINATION lib) +INSTALL(TARGETS Drawing DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Drawing/CMakeLists.txt freecad-svn5184.mod/src/Mod/Drawing/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Drawing/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Drawing/CMakeLists.txt 2011-11-30 11:03:56.361884884 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Drawing/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Drawing/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Drawing/Gui/CMakeLists.txt 2011-06-15 09:24:33.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Drawing/Gui/CMakeLists.txt 2011-11-30 11:05:11.758423159 -0600 @@ -83,6 +83,7 @@ else(MSVC) set_target_properties(DrawingGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Drawing) set_target_properties(DrawingGui PROPERTIES PREFIX "") + set_target_properties(DrawingGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS DrawingGui DESTINATION lib) +INSTALL(TARGETS DrawingGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Fem/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Fem/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Fem/App/CMakeLists.txt 2011-03-31 10:38:57.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Fem/App/CMakeLists.txt 2011-11-30 11:24:22.670819700 -0600 @@ -79,6 +79,7 @@ else(MSVC) set_target_properties(Fem PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Fem) set_target_properties(Fem PROPERTIES PREFIX "") + set_target_properties(Fem PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Fem DESTINATION lib) +INSTALL(TARGETS Fem DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Fem/CMakeLists.txt freecad-svn5184.mod/src/Mod/Fem/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Fem/CMakeLists.txt 2010-11-23 07:25:34.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Fem/CMakeLists.txt 2011-11-30 11:23:00.206515462 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Fem/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Fem/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Fem/Gui/CMakeLists.txt 2010-10-24 05:36:10.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Fem/Gui/CMakeLists.txt 2011-11-30 11:23:44.905054292 -0600 @@ -66,6 +66,7 @@ else(MSVC) set_target_properties(FemGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Fem) set_target_properties(FemGui PROPERTIES PREFIX "") + set_target_properties(FemGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS FemGui DESTINATION lib) +INSTALL(TARGETS FemGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Idf/CMakeLists.txt freecad-svn5184.mod/src/Mod/Idf/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Idf/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Idf/CMakeLists.txt 2011-11-30 11:25:49.758972604 -0600 @@ -48,23 +48,21 @@ fc_copy_sources("Mod/Idf" "Idf" ${all_files}) -install( +INSTALL( FILES ${IdfLibs_SRCS} DESTINATION Mod/Idf/Idflibs ) - -install( +INSTALL( FILES ${IdfLang_SRCS} DESTINATION Mod/Idf/Languages ) - -install( +INSTALL( FILES ${Idf_SRCS} DESTINATION Mod/Idf - ) +) diff -Naur freecad-svn5184.orig/src/Mod/Image/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Image/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Image/App/CMakeLists.txt 2011-01-25 09:40:19.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Image/App/CMakeLists.txt 2011-11-30 11:27:17.458105233 -0600 @@ -44,6 +44,7 @@ else(MSVC) set_target_properties(Image PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Image) set_target_properties(Image PROPERTIES PREFIX "") + set_target_properties(Image PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Image DESTINATION lib) +INSTALL(TARGETS Image DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Image/CMakeLists.txt freecad-svn5184.mod/src/Mod/Image/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Image/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Image/CMakeLists.txt 2011-11-30 11:26:36.060458740 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Image/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Image/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Image/Gui/CMakeLists.txt 2011-01-24 12:06:55.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Image/Gui/CMakeLists.txt 2011-11-30 11:27:58.559761333 -0600 @@ -69,6 +69,7 @@ else(MSVC) set_target_properties(ImageGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Image) set_target_properties(ImageGui PROPERTIES PREFIX "") + set_target_properties(ImageGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS ImageGui DESTINATION lib) +INSTALL(TARGETS ImageGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Import/CMakeLists.txt freecad-svn5184.mod/src/Mod/Import/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Import/CMakeLists.txt 2011-01-04 06:35:19.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Import/CMakeLists.txt 2011-11-30 11:28:45.368230781 -0600 @@ -4,10 +4,10 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py DESTINATION Mod/Import -) +) diff -Naur freecad-svn5184.orig/src/Mod/Import/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Import/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Import/Gui/CMakeLists.txt 2011-02-02 06:29:29.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Import/Gui/CMakeLists.txt 2011-11-30 11:29:14.799268344 -0600 @@ -56,6 +56,7 @@ else(MSVC) set_target_properties(ImportGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Import) set_target_properties(ImportGui PROPERTIES PREFIX "") + set_target_properties(ImportGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS ImportGui DESTINATION lib) +INSTALL(TARGETS ImportGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Inspection/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Inspection/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Inspection/App/CMakeLists.txt 2011-02-02 06:29:29.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Inspection/App/CMakeLists.txt 2011-11-30 11:30:36.267604260 -0600 @@ -50,6 +50,7 @@ else(MSVC) set_target_properties(Inspection PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) set_target_properties(Inspection PROPERTIES PREFIX "") + set_target_properties(Inspection PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) - -install(TARGETS Inspection DESTINATION lib) + +INSTALL(TARGETS Inspection DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Inspection/CMakeLists.txt freecad-svn5184.mod/src/Mod/Inspection/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Inspection/CMakeLists.txt 2011-01-26 03:20:55.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Inspection/CMakeLists.txt 2011-11-30 11:29:53.774993917 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Inspection/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Inspection/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Inspection/Gui/CMakeLists.txt 2011-02-02 06:29:29.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Inspection/Gui/CMakeLists.txt 2011-11-30 11:31:46.555305748 -0600 @@ -47,26 +47,27 @@ ViewProviderInspection.cpp ViewProviderInspection.h Workbench.cpp - Workbench.h -) - -add_library(InspectionGui SHARED ${InspectionGui_SRCS}) -target_link_libraries(InspectionGui ${InspectionGui_LIBS}) -fc_copy_script("Mod/Inspection" "InspectionGui" InitGui.py) - -if(MSVC) - set_target_properties(InspectionGui PROPERTIES SUFFIX ".pyd") - set_target_properties(InspectionGui PROPERTIES DEBUG_OUTPUT_NAME "InspectionGui_d") - set_target_properties(InspectionGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) - set_target_properties(InspectionGui PROPERTIES PREFIX "../") -elseif(MINGW) - set_target_properties(InspectionGui PROPERTIES SUFFIX ".pyd") - set_target_properties(InspectionGui PROPERTIES DEBUG_OUTPUT_NAME "InspectionGui_d") - set_target_properties(InspectionGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) - set_target_properties(InspectionGui PROPERTIES PREFIX "") -else(MSVC) - set_target_properties(InspectionGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) - set_target_properties(InspectionGui PROPERTIES PREFIX "") -endif(MSVC) - -install(TARGETS InspectionGui DESTINATION lib) + Workbench.h +) + +add_library(InspectionGui SHARED ${InspectionGui_SRCS}) +target_link_libraries(InspectionGui ${InspectionGui_LIBS}) +fc_copy_script("Mod/Inspection" "InspectionGui" InitGui.py) + +if(MSVC) + set_target_properties(InspectionGui PROPERTIES SUFFIX ".pyd") + set_target_properties(InspectionGui PROPERTIES DEBUG_OUTPUT_NAME "InspectionGui_d") + set_target_properties(InspectionGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) + set_target_properties(InspectionGui PROPERTIES PREFIX "../") +elseif(MINGW) + set_target_properties(InspectionGui PROPERTIES SUFFIX ".pyd") + set_target_properties(InspectionGui PROPERTIES DEBUG_OUTPUT_NAME "InspectionGui_d") + set_target_properties(InspectionGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) + set_target_properties(InspectionGui PROPERTIES PREFIX "") +else(MSVC) + set_target_properties(InspectionGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Inspection) + set_target_properties(InspectionGui PROPERTIES PREFIX "") + set_target_properties(InspectionGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) +endif(MSVC) + +INSTALL(TARGETS InspectionGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Mesh/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Mesh/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Mesh/App/CMakeLists.txt 2011-05-20 09:39:48.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Mesh/App/CMakeLists.txt 2011-11-30 11:33:47.854316080 -0600 @@ -347,6 +347,7 @@ else(MSVC) set_target_properties(Mesh PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Mesh) set_target_properties(Mesh PROPERTIES PREFIX "") + set_target_properties(Mesh PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Mesh DESTINATION lib) +INSTALL(TARGETS Mesh DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Mesh/CMakeLists.txt freecad-svn5184.mod/src/Mod/Mesh/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Mesh/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Mesh/CMakeLists.txt 2011-11-30 11:33:19.819243657 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Mesh/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Mesh/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Mesh/Gui/CMakeLists.txt 2010-11-05 09:59:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Mesh/Gui/CMakeLists.txt 2011-11-30 11:34:26.387041214 -0600 @@ -124,6 +124,7 @@ else(MSVC) set_target_properties(MeshGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Mesh) set_target_properties(MeshGui PROPERTIES PREFIX "") + set_target_properties(MeshGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS MeshGui DESTINATION lib) +INSTALL(TARGETS MeshGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/MeshPart/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/MeshPart/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/MeshPart/App/CMakeLists.txt 2010-10-24 05:36:10.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/MeshPart/App/CMakeLists.txt 2011-11-30 11:35:26.526051628 -0600 @@ -66,6 +66,7 @@ else(MSVC) set_target_properties(MeshPart PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/MeshPart) set_target_properties(MeshPart PROPERTIES PREFIX "") + set_target_properties(MeshPart PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS MeshPart DESTINATION lib) +INSTALL(TARGETS MeshPart DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/MeshPart/CMakeLists.txt freecad-svn5184.mod/src/Mod/MeshPart/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/MeshPart/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/MeshPart/CMakeLists.txt 2011-11-30 11:34:57.482012457 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/MeshPart/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/MeshPart/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/MeshPart/Gui/CMakeLists.txt 2010-10-02 18:53:11.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/MeshPart/Gui/CMakeLists.txt 2011-11-30 11:35:53.700152675 -0600 @@ -69,6 +69,7 @@ else(MSVC) set_target_properties(MeshPartGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/MeshPart) set_target_properties(MeshPartGui PROPERTIES PREFIX "") + set_target_properties(MeshPartGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS MeshPartGui DESTINATION lib) +INSTALL(TARGETS MeshPartGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Part/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Part/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Part/App/CMakeLists.txt 2011-11-17 04:31:04.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/Part/App/CMakeLists.txt 2011-11-30 11:36:57.685036101 -0600 @@ -252,6 +252,7 @@ else(MSVC) set_target_properties(Part PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Part) set_target_properties(Part PROPERTIES PREFIX "") + set_target_properties(Part PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Part DESTINATION lib) +INSTALL(TARGETS Part DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Part/CMakeLists.txt freecad-svn5184.mod/src/Mod/Part/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Part/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Part/CMakeLists.txt 2011-11-30 11:36:19.927285066 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Part/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Part/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Part/Gui/CMakeLists.txt 2011-10-15 08:31:58.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Part/Gui/CMakeLists.txt 2011-11-30 11:37:36.752743837 -0600 @@ -178,6 +178,7 @@ else(MSVC) set_target_properties(PartGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Part) set_target_properties(PartGui PROPERTIES PREFIX "") + set_target_properties(PartGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS PartGui DESTINATION lib) +INSTALL(TARGETS PartGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/PartDesign/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/PartDesign/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/PartDesign/App/CMakeLists.txt 2011-11-22 04:37:02.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/PartDesign/App/CMakeLists.txt 2011-11-30 11:38:57.340078457 -0600 @@ -105,6 +105,7 @@ else(MSVC) set_target_properties(PartDesign PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/PartDesign) set_target_properties(PartDesign PROPERTIES PREFIX "") + set_target_properties(PartDesign PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS PartDesign DESTINATION lib) +INSTALL(TARGETS PartDesign DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/PartDesign/CMakeLists.txt freecad-svn5184.mod/src/Mod/PartDesign/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/PartDesign/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/PartDesign/CMakeLists.txt 2011-11-30 11:38:26.413101317 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/PartDesign/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/PartDesign/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/PartDesign/Gui/CMakeLists.txt 2011-11-17 03:29:05.000000000 -0600 +++ freecad-svn5184.mod/src/Mod/PartDesign/Gui/CMakeLists.txt 2011-11-30 11:39:37.893737252 -0600 @@ -134,6 +134,7 @@ else(MSVC) set_target_properties(PartDesignGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/PartDesign) set_target_properties(PartDesignGui PROPERTIES PREFIX "") + set_target_properties(PartDesignGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS PartDesignGui DESTINATION lib) +INSTALL(TARGETS PartDesignGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Points/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Points/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Points/App/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Points/App/CMakeLists.txt 2011-11-30 11:41:17.777434173 -0600 @@ -59,6 +59,7 @@ else(MSVC) set_target_properties(Points PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Points) set_target_properties(Points PROPERTIES PREFIX "") + set_target_properties(Points PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Points DESTINATION lib) +INSTALL(TARGETS Points DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Points/CMakeLists.txt freecad-svn5184.mod/src/Mod/Points/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Points/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Points/CMakeLists.txt 2011-11-30 11:40:18.488394768 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Points/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Points/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Points/Gui/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Points/Gui/CMakeLists.txt 2011-11-30 11:42:01.941973792 -0600 @@ -69,6 +69,7 @@ else(MSVC) set_target_properties(PointsGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Points) set_target_properties(PointsGui PROPERTIES PREFIX "") + set_target_properties(PointsGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS PointsGui DESTINATION lib) +INSTALL(TARGETS PointsGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Raytracing/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Raytracing/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Raytracing/App/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Raytracing/App/CMakeLists.txt 2011-11-30 11:42:57.676130964 -0600 @@ -74,6 +74,7 @@ else(MSVC) set_target_properties(Raytracing PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Raytracing) set_target_properties(Raytracing PROPERTIES PREFIX "") + set_target_properties(Raytracing PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Raytracing DESTINATION lib) +INSTALL(TARGETS Raytracing DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Raytracing/CMakeLists.txt freecad-svn5184.mod/src/Mod/Raytracing/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Raytracing/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Raytracing/CMakeLists.txt 2011-11-30 11:42:29.349067575 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Raytracing/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Raytracing/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Raytracing/Gui/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Raytracing/Gui/CMakeLists.txt 2011-11-30 11:43:26.181188497 -0600 @@ -89,6 +89,7 @@ else(MSVC) set_target_properties(RaytracingGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Raytracing) set_target_properties(RaytracingGui PROPERTIES PREFIX "") + set_target_properties(RaytracingGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS RaytracingGui DESTINATION lib) +INSTALL(TARGETS RaytracingGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/ReverseEngineering/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/ReverseEngineering/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/ReverseEngineering/App/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/ReverseEngineering/App/CMakeLists.txt 2011-11-30 11:44:24.234269226 -0600 @@ -47,6 +47,7 @@ else(MSVC) set_target_properties(ReverseEngineering PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/ReverseEngineering) set_target_properties(ReverseEngineering PROPERTIES PREFIX "") + set_target_properties(ReverseEngineering PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS ReverseEngineering DESTINATION lib) +INSTALL(TARGETS ReverseEngineering DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/ReverseEngineering/CMakeLists.txt freecad-svn5184.mod/src/Mod/ReverseEngineering/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/ReverseEngineering/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/ReverseEngineering/CMakeLists.txt 2011-11-30 11:43:50.583381744 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Robot/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Robot/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Robot/App/CMakeLists.txt 2011-07-26 08:37:24.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Robot/App/CMakeLists.txt 2011-11-30 11:45:31.977029697 -0600 @@ -137,6 +137,7 @@ else(MSVC) set_target_properties(Robot PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Robot) set_target_properties(Robot PROPERTIES PREFIX "") + set_target_properties(Robot PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Robot DESTINATION lib) +INSTALL(TARGETS Robot DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Robot/CMakeLists.txt freecad-svn5184.mod/src/Mod/Robot/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Robot/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Robot/CMakeLists.txt 2011-11-30 11:45:04.496938137 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Robot/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Robot/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Robot/Gui/CMakeLists.txt 2011-07-26 08:37:24.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Robot/Gui/CMakeLists.txt 2011-11-30 11:46:01.680047793 -0600 @@ -162,6 +162,7 @@ else(MSVC) set_target_properties(RobotGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Robot) set_target_properties(RobotGui PROPERTIES PREFIX "") + set_target_properties(RobotGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS RobotGui DESTINATION lib) +INSTALL(TARGETS RobotGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Sandbox/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sandbox/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sandbox/App/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sandbox/App/CMakeLists.txt 2011-11-30 11:47:17.199551470 -0600 @@ -46,6 +46,7 @@ else(MSVC) set_target_properties(Sandbox PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Sandbox) set_target_properties(Sandbox PROPERTIES PREFIX "") + set_target_properties(Sandbox PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Sandbox DESTINATION lib) +INSTALL(TARGETS Sandbox DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Sandbox/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sandbox/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sandbox/CMakeLists.txt 2010-08-24 06:42:52.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sandbox/CMakeLists.txt 2011-11-30 11:46:39.023813388 -0600 @@ -4,10 +4,10 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( - FILES - Init.py - InitGui.py - DESTINATION - Mod/Sandbox +INSTALL( + FILES + Init.py + InitGui.py + DESTINATION + Mod/Sandbox ) diff -Naur freecad-svn5184.orig/src/Mod/Sandbox/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sandbox/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sandbox/Gui/CMakeLists.txt 2011-07-08 08:07:49.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sandbox/Gui/CMakeLists.txt 2011-11-30 11:47:59.296160060 -0600 @@ -57,6 +57,7 @@ else(MSVC) set_target_properties(SandboxGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Sandbox) set_target_properties(SandboxGui PROPERTIES PREFIX "") + set_target_properties(SandboxGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS SandboxGui DESTINATION lib) +INSTALL(TARGETS SandboxGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Sketcher/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sketcher/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sketcher/App/CMakeLists.txt 2011-09-07 09:40:01.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sketcher/App/CMakeLists.txt 2011-11-30 11:48:49.511500367 -0600 @@ -121,6 +121,7 @@ else(MSVC) set_target_properties(Sketcher PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Sketcher) set_target_properties(Sketcher PROPERTIES PREFIX "") + set_target_properties(Sketcher PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Sketcher DESTINATION lib) +INSTALL(TARGETS Sketcher DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Sketcher/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sketcher/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sketcher/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sketcher/CMakeLists.txt 2011-11-30 11:48:21.240434767 -0600 @@ -4,7 +4,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Sketcher/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Sketcher/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Sketcher/Gui/CMakeLists.txt 2011-10-03 17:57:56.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Sketcher/Gui/CMakeLists.txt 2011-11-30 11:49:16.609604780 -0600 @@ -113,6 +113,7 @@ else(MSVC) set_target_properties(SketcherGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Sketcher) set_target_properties(SketcherGui PROPERTIES PREFIX "") + set_target_properties(SketcherGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS SketcherGui DESTINATION lib) +INSTALL(TARGETS SketcherGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Start/App/CMakeLists.txt freecad-svn5184.mod/src/Mod/Start/App/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Start/App/CMakeLists.txt 2011-05-16 11:06:57.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Start/App/CMakeLists.txt 2011-11-30 11:50:12.614753899 -0600 @@ -37,6 +37,7 @@ else(MSVC) set_target_properties(Start PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Start) set_target_properties(Start PROPERTIES PREFIX "") + set_target_properties(Start PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS Start DESTINATION lib) +INSTALL(TARGETS Start DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Start/CMakeLists.txt freecad-svn5184.mod/src/Mod/Start/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Start/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Start/CMakeLists.txt 2011-11-30 19:08:17.276035136 -0600 @@ -2,9 +2,10 @@ add_subdirectory(App) if(FREECAD_BUILD_GUI) add_subdirectory(Gui) + add_subdirectory(StartPage) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Start/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Start/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Start/Gui/CMakeLists.txt 2011-09-13 09:34:13.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Start/Gui/CMakeLists.txt 2011-11-30 11:50:41.919785412 -0600 @@ -70,6 +70,7 @@ else(MSVC) set_target_properties(StartGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Start) set_target_properties(StartGui PROPERTIES PREFIX "") + set_target_properties(StartGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS StartGui DESTINATION lib) +INSTALL(TARGETS StartGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/TemplatePyMod/CMakeLists.txt freecad-svn5184.mod/src/Mod/TemplatePyMod/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/TemplatePyMod/CMakeLists.txt 2011-08-08 14:17:10.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/TemplatePyMod/CMakeLists.txt 2011-11-30 11:51:17.723602252 -0600 @@ -9,13 +9,14 @@ DocumentObject.py ) -install( - FILES - Init.py - InitGui.py - Commands.py - FeaturePython.py - PythonQt.py - Tests.py - DESTINATION - Mod/TemplatePyMod) +INSTALL( + FILES + Init.py + InitGui.py + Commands.py + FeaturePython.py + PythonQt.py + Tests.py + DESTINATION + Mod/TemplatePyMod +) diff -Naur freecad-svn5184.orig/src/Mod/Test/CMakeLists.txt freecad-svn5184.mod/src/Mod/Test/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Test/CMakeLists.txt 2011-07-13 05:10:30.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Test/CMakeLists.txt 2011-11-30 11:51:58.554253017 -0600 @@ -20,7 +20,7 @@ fc_copy_sources("Mod/Test" "Test" ${Test_SRCS}) -install( +INSTALL( FILES ${Test_SRCS} DESTINATION diff -Naur freecad-svn5184.orig/src/Mod/Test/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Test/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Test/Gui/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Test/Gui/CMakeLists.txt 2011-11-30 11:52:37.617962226 -0600 @@ -65,6 +65,7 @@ else(MSVC) set_target_properties(QtUnitGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Test) set_target_properties(QtUnitGui PROPERTIES PREFIX "") + set_target_properties(QtUnitGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS QtUnitGui DESTINATION lib) +INSTALL(TARGETS QtUnitGui DESTINATION lib) diff -Naur freecad-svn5184.orig/src/Mod/Web/CMakeLists.txt freecad-svn5184.mod/src/Mod/Web/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Web/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Web/CMakeLists.txt 2011-11-30 11:53:02.772131074 -0600 @@ -3,7 +3,7 @@ add_subdirectory(Gui) endif(FREECAD_BUILD_GUI) -install( +INSTALL( FILES Init.py InitGui.py diff -Naur freecad-svn5184.orig/src/Mod/Web/Gui/CMakeLists.txt freecad-svn5184.mod/src/Mod/Web/Gui/CMakeLists.txt --- freecad-svn5184.orig/src/Mod/Web/Gui/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5184.mod/src/Mod/Web/Gui/CMakeLists.txt 2011-11-30 11:54:00.295230454 -0600 @@ -52,6 +52,7 @@ else(MSVC) set_target_properties(WebGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Web) set_target_properties(WebGui PROPERTIES PREFIX "") + set_target_properties(WebGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) -install(TARGETS WebGui DESTINATION lib) +INSTALL(TARGETS WebGui DESTINATION lib) diff -Naur freecad-svn5220.orig/src/Mod/Complete/Gui/CMakeLists.txt freecad-svn5220/src/Mod/Complete/Gui/CMakeLists.txt --- freecad-svn5220.orig/src/Mod/Complete/Gui/CMakeLists.txt 2010-09-10 17:47:15.000000000 -0500 +++ freecad-svn5220/src/Mod/Complete/Gui/CMakeLists.txt 2011-12-05 10:20:10.830553148 -0600 @@ -44,6 +44,7 @@ else(MSVC) set_target_properties(CompleteGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/Complete) set_target_properties(CompleteGui PROPERTIES PREFIX "") + set_target_properties(CompleteGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) install(TARGETS CompleteGui DESTINATION lib) diff -Naur freecad-svn5220.orig/src/Mod/ReverseEngineering/Gui/CMakeLists.txt freecad-svn5220/src/Mod/ReverseEngineering/Gui/CMakeLists.txt --- freecad-svn5220.orig/src/Mod/ReverseEngineering/Gui/CMakeLists.txt 2010-09-11 04:58:50.000000000 -0500 +++ freecad-svn5220/src/Mod/ReverseEngineering/Gui/CMakeLists.txt 2011-12-05 10:50:21.815925156 -0600 @@ -54,6 +54,9 @@ else(MSVC) set_target_properties(ReverseEngineeringGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/Mod/ReverseEngineering) set_target_properties(ReverseEngineeringGui PROPERTIES PREFIX "") + set_target_properties(ReverseEngineeringGui + PROPERTIES INSTALL_RPATH ${INSTALL_RPATH} + ) endif(MSVC) install(TARGETS ReverseEngineeringGui DESTINATION lib) diff -Naur freecad-svn5220.orig/src/App/CMakeLists.txt freecad-svn5220/src/App/CMakeLists.txt --- freecad-svn5220.orig/src/App/CMakeLists.txt 2011-12-05 13:43:58.164206727 -0600 +++ freecad-svn5220/src/App/CMakeLists.txt 2011-12-05 13:35:16.637348028 -0600 @@ -184,6 +184,7 @@ set_target_properties(FreeCADApp PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) else(MSVC) set_target_properties(FreeCADApp PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(FreeCADApp PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -192,7 +193,7 @@ LIBRARY DESTINATION lib ) else(WIN32) - INSTALL(TARGETS FreeCADApp + INSTALL(TARGETS FreeCADApp LIBRARY DESTINATION lib ) endif(WIN32) diff -Naur freecad-svn5220.orig/src/Base/CMakeLists.txt freecad-svn5220/src/Base/CMakeLists.txt --- freecad-svn5220.orig/src/Base/CMakeLists.txt 2011-12-05 13:43:58.164206727 -0600 +++ freecad-svn5220/src/Base/CMakeLists.txt 2011-12-05 13:37:27.551041426 -0600 @@ -301,6 +301,7 @@ set_target_properties(FreeCADBase PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) else(MSVC) set_target_properties(FreeCADBase PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(FreeCADBase PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -309,9 +310,6 @@ LIBRARY DESTINATION lib ) else(WIN32) - set_target_properties(FreeCADBase - PROPERTIES INSTALL_RPATH ${INSTALL_RPATH} - ) INSTALL(TARGETS FreeCADBase LIBRARY DESTINATION lib ) diff -Naur freecad-svn5220.orig/src/Gui/CMakeLists.txt freecad-svn5220/src/Gui/CMakeLists.txt --- freecad-svn5220.orig/src/Gui/CMakeLists.txt 2011-07-25 09:59:26.000000000 -0500 +++ freecad-svn5220/src/Gui/CMakeLists.txt 2011-12-05 13:35:57.316009531 -0600 @@ -830,6 +830,7 @@ set_target_properties(FreeCADGui PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) else(MSVC) set_target_properties(FreeCADGui PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(FreeCADGui PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) diff -Naur freecad-svn5220.orig/src/Main/CMakeLists.txt freecad-svn5220/src/Main/CMakeLists.txt --- freecad-svn5220.orig/src/Main/CMakeLists.txt 2011-08-07 06:09:01.000000000 -0500 +++ freecad-svn5220/src/Main/CMakeLists.txt 2011-12-05 13:42:07.577838112 -0600 @@ -59,6 +59,7 @@ else(MSVC) set_target_properties(FreeCADMain PROPERTIES OUTPUT_NAME "FreeCAD") set_target_properties(FreeCADMain PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) + set_target_properties(FreeCADMain PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -99,6 +100,7 @@ else(MSVC) set_target_properties(FreeCADMainCmd PROPERTIES OUTPUT_NAME "FreeCADCmd") set_target_properties(FreeCADMainCmd PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) + set_target_properties(FreeCADMainCmd PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -140,6 +142,7 @@ set_target_properties(FreeCADMainPy PROPERTIES OUTPUT_NAME "FreeCAD") set_target_properties(FreeCADMainPy PROPERTIES PREFIX "") set_target_properties(FreeCADMainPy PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(FreeCADMainPy PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -178,10 +181,12 @@ set_target_properties(FreeCADGuiPy PROPERTIES SUFFIX ".pyd") set_target_properties(FreeCADGuiPy PROPERTIES PREFIX "") set_target_properties(FreeCADGuiPy PROPERTIES RUNTIME_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/bin) + set_target_properties(FreeCADGuiPy PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) else(MSVC) set_target_properties(FreeCADGuiPy PROPERTIES OUTPUT_NAME "FreeCADGui") set_target_properties(FreeCADGuiPy PROPERTIES PREFIX "") set_target_properties(FreeCADGuiPy PROPERTIES LIBRARY_OUTPUT_DIRECTORY ${CMAKE_BINARY_DIR}/lib) + set_target_properties(FreeCADGuiPy PROPERTIES INSTALL_RPATH ${INSTALL_RPATH}) endif(MSVC) if(WIN32) @@ -194,4 +199,4 @@ LIBRARY DESTINATION lib ) endif(WIN32) -endif(FREECAD_BUILD_GUI) \ No newline at end of file +endif(FREECAD_BUILD_GUI) --- NEW FILE freecad.1 --- .\" Hey, EMACS: -*- nroff -*- .\" First parameter, NAME, should be all caps .\" Second parameter, SECTION, should be 1-8, maybe w/ subsection .\" other parameters are allowed: see man(7), man(1) .TH FREECAD 1 "July 25, 2007" freecad "Linux User's Manual" .\" Please adjust this date whenever revising the manpage. .\" .\" Some roff macros, for reference: .\" .nh disable hyphenation .\" .hy enable hyphenation .\" .ad l left justify .\" .ad b justify to both left and right margins .\" .nf disable filling .\" .fi enable filling .\" .br insert line break .\" .sp <n> insert n+1 empty lines .\" for manpage-specific macros, see man(7) .SH NAME freecad \- An extensible Open Source CAx program for Unix/X11 .SH SYNOPSIS .B freecad .RI [ options ] " files" .br .B freecadcmd .RI [ options ] " files" .SH DESCRIPTION .B FreeCAD is an Open Source CAx RAD based on OpenCasCade, Qt and Python. It features some key concepts like macro recording, workbenches, ability to run as a server and dynamically loadable application extensions and it is designed to be platform independent. .\" TeX users may be more comfortable with the \fB<whatever>\fP and .\" \fI<whatever>\fP escape sequences to invode bold face and italics, .\" respectively. .SH USAGE \fBfreecad\fR starts with a GUI while \fBfreecadcmd\fR is only a pure command line version that starts a Python interpreter. .SH OPTIONS These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of the options supported by \fBfreecad\fR is included below. .SS "Generic options" .TP \fB\-h, \-\-help\fR Show summary of options. .TP \fB\-v, \-\-version\fR Show version of program. .TP \fB\-c, \-\-console\fR Start in console mode. .TP \fB\-\-response\-file\fR \fIarg\fR Can be specified with '@name', too. .SS "Configuration" .TP \fB\-l, \-\-write\-log\fR Write a log file. .TP \fB\-t, \-\-run\-test\fR \fIarg\fR Test level. .TP \fB\-M, \-\-module\-path\fR \fIarg\fR Additional module path. .TP \fB\-P, \-\-python\-path\fR \fIarg\fR Additional Python path. .SH SEE ALSO To get more information about \fBFreeCAD\fR, please visit \fIhttp://juergen\-riegel.net/FreeCAD/Docu/index.php/Main_Page\fR .SH BUGS To report a bug, please visit \fIhttp://free-cad.sf.net/\fR .SH AUTHOR This manual page was written by Werner Mayer. --- NEW FILE freecad.desktop --- [Desktop Entry] Version=1.0 Name=FreeCAD Name[de]=FreeCAD Comment=Feature based Parametric Modeler Comment[de]=Feature-basierter parametrischer Modellierer GenericName=CAD Application GenericName[de]=CAD-Anwendung Exec=/usr/bin/FreeCAD %F Path=/usr/@lib@/freecad Terminal=false Type=Application Icon=freecad Categories=Graphics;Science;Education;Engineering; StartupNotify=true GenericName[de_DE]=Feature-basierter parametrischer Modellierer MimeType=application/x-extension-fcstd; --- NEW FILE freecad.spec --- # Maintainers: keep this list of plugins up to date # List plugins in %%{_libdir}/freecad/lib, less '.so' and 'Gui.so', here %global plugins Complete Drawing Fem FreeCAD Image Import Inspection Mesh MeshPart Part PartDesign Points QtUnit Raytracing ReverseEngineering Robot Sketcher Start Web # This revision is 0.12 final. %global svnrev 5284 # Use update cmake package on EL builds. %if 0%{?el6} %global cmake %cmake28 %endif # Some configuration options for other environments # rpmbuild --with=occ: Compile using OpenCASCADE instead of OCE %global occ %{?_with_occ: 1} %{?!_with_occ: 0} # rpmbuild --with=bundled_zipios: use bundled version of zipios++ %global bundled_zipios %{?_with_bundled_zipios: 1} %{?!_with_bundled_zipios: 0} # rpmbuild --with=bundled_pycxx: use bundled version of pycxx %global bundled_pycxx %{?_with_bundled_pycxx: 1} %{?!_with_bundled_pycxx: 0} # rpmbuild --with=bundled_smesh: use bundled version of Salome's Mesh %global bundled_smesh %{?_with_bundled_smesh: 1} %{?!_with_bundled_smesh: 0} Name: freecad Version: 0.12 Release: 7%{?dist} Summary: A general purpose 3D CAD modeler Group: Applications/Engineering # This package must go in the non-free repository because of its dependence # on OCE which is considered non-free. License: GPLv3+ with exception URL: http://sourceforge.net/apps/mediawiki/free-cad/ Source0: http://downloads.sourceforge.net/free-cad/%{name}-%{version}.%{svnrev}.ta... Source101: freecad.desktop Source102: freecad.1 # Patches 0 & 2 accepted upstream. # https://sourceforge.net/apps/mantisbt/free-cad/view.php?id=519 # Fix a bunch of rpath issues and other tweaks. Patch0: freecad-system_inst.patch # Remove bundled libs from cmake configuration. Patch1: freecad-3rdParty.patch # Fix incomplete cmake config. Patch2: freecad-StartPage.patch # Fixed in svn Patch3: freecad-glu.patch # Disable unfinished modules. Patch4: freecad-cmake_Mod_fix.patch # Unbundle zipios++ Patch5: freecad-0.12-zipios.patch # Patch for gcc 4.7 Patch6: freecad-gcc-4.7.patch # Add build option for OpenCASCADE Patch7: freecad-0.12-OpenCASCADE-option.patch # Unbundle PyCXX Patch8: freecad-0.12-pycxx.patch # f2c is only needed for smesh, and maybe not even there Patch9: freecad-0.12-rm_f2c.patch # Utilities BuildRequires: cmake doxygen swig BuildRequires: gcc-gfortran BuildRequires: gettext BuildRequires: dos2unix BuildRequires: desktop-file-utils # Development Libraries BuildRequires: freeimage-devel BuildRequires: libXmu-devel BuildRequires: mesa-libGLU-devel %if %{occ} BuildRequires: OpenCASCADE-devel %else BuildRequires: OCE-devel %endif # Not yet in Fedora # https://bugzilla.redhat.com/show_bug.cgi?id=665733 #BuildRequires: Coin3-devel BuildRequires: Coin2-devel BuildRequires: python2-devel BuildRequires: boost-devel BuildRequires: eigen3-devel BuildRequires: qt-devel qt-webkit-devel BuildRequires: SoQt-devel # Not used yet. #BuildRequires: ode-devel BuildRequires: xerces-c xerces-c-devel BuildRequires: libspnav-devel #BuildRequires: opencv-devel %if ! %{bundled_smesh} BuildRequires: smesh-devel %endif %if ! %{bundled_zipios} BuildRequires: zipios++-devel %endif %if ! %{bundled_pycxx} BuildRequires: python-pycxx-devel %endif # Needed for plugin support and is not a soname dependency. Requires: python-pivy Requires: hicolor-icon-theme # plugins and private shared libs in %%{_libdir}/freecad/lib are private; # prevent private capabilities being advertised in Provides/Requires %define plugin_regexp /^\\\(libFreeCAD.*%(for i in %{plugins}; do echo -n "\\\|$i\\\|$iGui"; done)\\\)\\\(\\\|Gui\\\)\\.so/d %{?filter_setup: %filter_provides_in %{_libdir}/%{name}/lib %filter_from_requires %{plugin_regexp} %filter_from_provides %{plugin_regexp} %filter_setup } %description FreeCAD is a general purpose Open Source 3D CAD/MCAD/CAx/CAE/PLM modeler, aimed directly at mechanical engineering and product design but also fits a wider range of uses in engineering, such as architecture or other engineering specialties. It is a feature-based parametric modeler with a modular software architecture which makes it easy to provide additional functionality without modifying the core system. %package doc Summary: Extended documentation for FreeCAD Group: Documentation BuildArch: noarch Requires: %{name} = %{version}-%{release} Requires: qt-assistant %description doc End user documentation for FreeCAD %prep %setup -q -n FreeCAD-%{version}.%{svnrev} %patch0 -p1 -b .sysinst %patch1 -p1 -b .3rdparty %patch2 -p1 -b .startpage %patch3 -p1 -b .glufix %patch4 -p1 -b .modfix %patch5 -p1 -b .zipios %patch6 -p1 -b .gcc47 %patch7 -p1 -b .OCC # Remove bundled pycxx if we're not using it %if ! %{bundled_pycxx} %patch8 -p1 -b .pycxx rm -rf src/CXX %endif %patch9 -p1 -b .f2c # Fix encodings dos2unix -k src/Mod/Test/unittestgui.py \ ChangeLog.txt \ copying.lib \ data/License.txt # Removed bundled libraries rm -rf src/3rdParty %build rm -rf build && mkdir build && pushd build LDFLAGS='-Wl,--as-needed'; export LDFLAGS %cmake -DCMAKE_INSTALL_PREFIX=%{_libdir}/freecad \ -DRESOURCEDIR=%{_libdir}/freecad \ -DDOCDIR=%{_docdir}/%{name} \ -DCOIN3D_INCLUDE_DIR=%{_includedir}/Coin2 \ -DCOIN3D_DOC_PATH=%{_datadir}/Coin2/Coin \ %if %{occ} -DUSE_OCC=TRUE \ %endif %if ! %{bundled_smesh} -DSMESH_INCLUDE_DIR=%{_includedir} \ %endif %if ! %{bundled_zipios} -DUSE_EXTERNAL_ZIPIOS=TRUE \ %endif %if ! %{bundled_pycxx} -DPYCXX_INCLUDE_DIR=$(pkg-config --variable=includedir PyCXX) \ -DPYCXX_SOURCE_DIR=$(pkg-config --variable=srcdir PyCXX) \ %endif ../ make %{?_smp_mflags} %install pushd build make install DESTDIR=%{buildroot} popd # Symlink binaries to /usr/bin mkdir -p %{buildroot}%{_bindir} pushd %{buildroot}%{_bindir} ln -s ../%{_lib}/freecad/bin/FreeCAD . ln -s ../%{_lib}/freecad/bin/FreeCADCmd . popd # Fix problems with unittestgui.py chmod +x %{buildroot}%{_libdir}/%{name}/Mod/Test/unittestgui.py # Install desktop file desktop-file-install \ --dir=%{buildroot}%{_datadir}/applications \ %{SOURCE101} sed -i 's,@lib@,%{_lib},g' %{buildroot}%{_datadir}/applications/%{name}.desktop # Install desktop icon install -pD -m 0644 src/Gui/Icons/%{name}.svg \ %{buildroot}%{_datadir}/icons/hicolor/scalable/apps/%{name}.svg # Install man page install -pD -m 0644 %{SOURCE102} \ %{buildroot}%{_mandir}/man1/%{name}.1 # Symlink manpage to other binary names pushd %{buildroot}%{_mandir}/man1 ln -sf %{name}.1.gz FreeCAD.1.gz ln -sf %{name}.1.gz FreeCADCmd.1.gz popd # Install QT Assistant documentation mkdir -p %{buildroot}%{_docdir}/%{name} install -pm 0644 build/doc/freecad.* %{buildroot}%{_docdir}/%{name}/ # Bug maintainers to keep %%{plugins} macro up to date. # # Make sure there are no plugins that need to be added to plugins macro new_plugins=`ls %{buildroot}%{_libdir}/freecad/lib | sed -e '%{plugin_regexp}'` if [ -n "$new_plugins" ]; then echo -e "\n\n\n**** ERROR:\n" \ "\nPlugins not caught by regexp: " $new_plugins \ "\n\nPlugins in %{_libdir}/freecad/lib do not exist in" \ "\nspecfile %%{plugins} macro. Please add these to" \ "\n%%{plugins} macro at top of specfile and rebuild.\n****\n" 1>&2 exit 1 fi # Make sure there are no entries in the plugins macro that don't match plugins for p in %{plugins}; do if [ -z "`ls %{buildroot}%{_libdir}/freecad/lib/$p*.so`" ]; then set +x echo -e "\n\n\n**** ERROR:\n" \ "\nExtra entry in %%{plugins} macro with no matching plugin:" \ "'$p'.\n\nPlease remove from %%{plugins} macro at top of" \ "\nspecfile and rebuild.\n****\n" 1>&2 exit 1 fi done %post /bin/touch --no-create %{_datadir}/icons/hicolor &>/dev/null || : %postun if [ $1 -eq 0 ] ; then /bin/touch --no-create %{_datadir}/icons/hicolor &>/dev/null /usr/bin/gtk-update-icon-cache %{_datadir}/icons/hicolor &>/dev/null || : fi %posttrans /usr/bin/gtk-update-icon-cache %{_datadir}/icons/hicolor &>/dev/null || : %files %doc ChangeLog.txt copying.lib data/License.txt build/doc/* %{_bindir}/* %{_datadir}/applications/%{name}.desktop %{_datadir}/icons/hicolor/scalable/apps/%{name}.svg %dir %{_libdir}/%{name} %{_libdir}/%{name}/bin/ %{_libdir}/%{name}/data/ %{_libdir}/%{name}/lib/ %{_libdir}/%{name}/Mod/ %{_mandir}/man1/*.1.gz %files doc %{_docdir}/%{name} %changelog * Thu Jul 05 2012 Richard Shaw <hobbes1069(a)gmail.com&gt; - 0.12-7 - Remove BuildRequires: tbb-devel and gts-devel - Add missing license files to %%doc. - Add missing build requirement for hicolor-icon-theme. - Fix excessive linking issue. - Other minor spec updates. * Mon Jun 25 2012 <john(a)zultron.com&gt; - 0.12-6 - Filter out automatically generated Provides/Requires of private libraries - freecad.desktop not passing 'desktop-file-validate'; fixed * Mon Jun 25 2012 <john(a)zultron.com&gt; - 0.12-5 - New patch to unbundle PyCXX - Add conditional build options for OpenCASCADE, bundled Zipios++, bundled PyCXX, bundled smesh * Tue Jun 19 2012 Richard Shaw <hobbes1069(a)gmail.com&gt; - 0.12-4 - Add linker flag to stop excessive linking. * Thu May 31 2012 Richard Shaw <hobbes1069(a)gmail.com&gt; - 0.12-3 - Add patch for GCC 4.7 on Fedora 17. * Thu Nov 10 2011 Richard Shaw <hobbes1069(a)gmail.com&gt; - 0.12-2 - Initial release. Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/freecad/EL-6/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 5 Jul 2012 21:00:42 -0000 1.1 +++ sources 21 Oct 2012 18:34:23 -0000 1.2 @@ -0,0 +1 @@ +fcd91286c578a219491ffebb2111bddf freecad-0.12.5284.tar.gz