Author: leigh123linux Update of /cvs/nonfree/rpms/xorg-x11-drv-catalyst-legacy/F-18 In directory old02.ovh.rpmfusion.lan:/tmp/cvs-serv31751 Modified Files: .cvsignore sources Added Files: 00-catalyst-legacy-modulepath.conf 01-catalyst-legacy-videodriver.conf amdcccle.desktop catalyst-legacy-README.Fedora catalyst-legacy-a-ac-aticonfig catalyst-legacy-a-lid-aticonfig catalyst-legacy-ati-powermode.sh catalyst-legacy-atieventsd.init xorg-x11-drv-catalyst-legacy.spec Log Message: * Mon Feb 04 2013 Leigh Scott <leigh123linux(a)googlemail.com&gt; - 13.1-1 - Update to Catalyst legacy (internal version 13.1 8.97.100.7) --- NEW FILE 00-catalyst-legacy-modulepath.conf --- # This file is provided by xorg-x11-drv-catalyst-legacy; do not edit. Section "Files" ModulePath "@LIBDIR@/xorg/modules/extensions/catalyst-legacy" ModulePath "@LIBDIR@/xorg/modules" EndSection --- NEW FILE 01-catalyst-legacy-videodriver.conf --- # This file is provided by xorg-x11-drv-catalyst-legacy; do not edit. Section "Device" Identifier "Videocard0" Driver "fglrx" EndSection --- NEW FILE amdcccle.desktop --- [Desktop Entry] Name=ATI Catalyst Control Center Name[de]=ATI Catalyst Control Center Name[es]=ATI Catalyst Control Center Name[fr]=ATI Catalyst Control Center Name[it]=ATI Catalyst Control Center GenericName=ATI Catalyst Control Center GenericName[de]=ATI Catalyst Control Center GenericName[es]=ATI Catalyst Control Center GenericName[fr]=ATI Catalyst Control Center GenericName[it]=ATI Catalyst Control Center Comment=ATI graphics adapter configuration Comment[de]=ATI Graphik-Adapterkonfiguration Comment[es]=Configuración del adaptador de los gráficos de ATI Comment[fr]=Configuration d'adapteur de graphiques d'ATI Comment[it]=Configurazione dell'adattatore dei grafici di ATI Icon=ccc_large Exec=amdcccle Type=Application Terminal=false Categories=Qt;System; --- NEW FILE catalyst-legacy-README.Fedora --- README for AMD's Linux fglrx drivers, as packaged by rpmfusion.org. 1. After Installation ----------------------------- The easiest way to start using the fglrx drivers after installation is to restart your system. The hard way depends on your hardware and your configuration: Check if you have loaded the module "radeon". If not simply log out of your X session to restart X -- the catalyst driver should now be loaded if there is a proper kernel-module installed. You can also run: modprobe fglrx to force the fglrx kernel module to load. If you have loaded the radeon driver, log out of your X session, log in again and issue the command: /sbin/rmmod radeon then end your X session once again. To check that hardware acceleration is working, issue the following command in a terminal: glxinfo | grep "OpenGL vendor" That should print out OpenGL vendor string: ATI Technologies Inc. Also, the command glxinfo | grep direct should print out direct rendering: Yes If it does, you're all set. 2. Basic Configuration ----------------------------- The installation scripts perform the basic configuration for you. When (if) you uninstall the drivers, the configuration is reset to use the default autodetected driver again. If you want to temporarily disable the fglrx drivers without uninstalling, look inside /etc/X11/xorg.conf.d and backup any files with a filename matching the pattern XY-catalyst-* and then restart your X session. To re-enable the drivers, replace these files to their original state. 3. Additional configuration ---------------------------------- For configuration options (TwinView, TV-out etc) see /usr/share/doc/fglrx-*/index.html 4. Kernel Module ----------------------------- The fglrx kernel module is required for DRI. For Fedora kernels you will find RPMs with the name: kmod-catalyst-$(uname -r)-(ati-version)-fc(releasever).(arch).rpm (e.g. kmod-catalyst-2.6.27.19-170.2.35.fc10.x86_64-9.4-1.fc10.x86_64) at rpmfusion.org. If you use another kernel, grab the proper SRPM: (e.g catalyst-kmod-9.4.fc10.src.rpm) from rpmfusion.org and rebuild the kernel module with the following command: rpmbuild --rebuild /path/to/catalyst-srpm.src.rpm 5. Release-specific notes ----------------------------- Please note that this release was not written to run correctly on the Xorg server version included with Fedora 16 and will likely fail to operate correctly with most, if not all, graphic cards. During testing it was found that in some cases, kernel modesetting may need to disabled in order for the fglrx driver to function correctly. You may want to edit /etc/grub2.cfg manually and add the 'nomodeset' kernel parameter. --- NEW FILE catalyst-legacy-a-ac-aticonfig --- # /usr/bin/ati-powermode.sh # Called when the user connects ac power to us # event=ac_adapter action=/usr/bin/ati-powermode.sh --- NEW FILE catalyst-legacy-a-lid-aticonfig --- # /usr/bin/ati-powermode.sh # Called when the user opens/closes the laptop lid # event=button[ /]lid action=/usr/bin/ati-powermode.sh --- NEW FILE catalyst-legacy-ati-powermode.sh --- #!/bin/bash # # Control script for ACPI lid state and AC adapter state # # Copyright (c) 2006, ATI Technologies Inc. All rights reserved. # # Fedora Modifications By Michael Larabel <Michael AT Phoronix.com> on July 5, 2006 getXuser() { user=`finger| grep -m1 ":$displaynum " | awk '{print $1}'` if [ x"$user" = x"" ]; then user=`finger| grep -m1 ":$displaynum" | awk '{print $1}'` fi if [ x"$user" != x"" ]; then userhome=`getent passwd $user | cut -d: -f6` export XAUTHORITY=$userhome/.Xauthority else export XAUTHORITY="" fi } grep -q closed /proc/acpi/button/lid/*/state if [ $? = 0 ]; then lid_closed=1 echo "Lid Closed" else lid_closed=0 echo "Lid Open" fi grep -q off-line /proc/acpi/ac_adapter/*/state if [ $? = 0 ]; then echo "On DC" on_dc=1 else echo "On AC" on_dc=0 fi if [ ${lid_closed} -eq 1 -o ${on_dc} -eq 1 ]; then echo "Low power" for x in /tmp/.X11-unix/*; do displaynum=`echo $x | sed s#/tmp/.X11-unix/X##` getXuser; if [ x"$XAUTHORITY" != x"" ]; then export DISPLAY=":$displaynum" su $user -c "/usr/bin/aticonfig --set-powerstate=1 --effective=now" fi done else echo "High power" for x in /tmp/.X11-unix/*; do displaynum=`echo $x | sed s#/tmp/.X11-unix/X##` getXuser; if [ x"$XAUTHORITY" != x"" ]; then export DISPLAY=":$displaynum" su $user -c "/usr/bin/aticonfig --set-powerstate=3 --effective=now" fi done fi --- NEW FILE catalyst-legacy-atieventsd.init --- #!/bin/sh # Startup script for the ATI External Events Daemon (atieventsd) # # chkconfig: 5 97 07 # description: Grant or revoke access to X for the ATI External Events Daemon # Source function library. . /etc/rc.d/init.d/functions [ -f /usr/sbin/atieventsd ] || exit 0 prog=atieventsd opts="" PATH=/sbin:/usr/sbin:$PATH RETVAL=0 start() { echo -n $"Starting ATI External Events Daemon: " XAUTHORITY=/var/run/$prog.Xauthority $prog $opts RETVAL=$? pid=`pidof $prog` if [ -n "$pid" ] ; then success $"atieventsd" touch /var/lock/subsys/$prog echo $pid > /var/run/$prog.pid RETVAL=0 else failure $"atieventsd" RETVAL=1 fi echo } stop() { echo -n $"Stopping ATI External Events Daemon: " killproc $prog RETVAL=$? if [ $RETVAL -eq 0 ]; then rm -f /var/run/$prog.pid rm -f /var/lock/subsys/$prog fi echo } case "$1" in start) start ;; stop) stop ;; status) status $prog ;; restart|reload) stop start ;; condrestart) if [ -f /var/lock/subsys/$prog ]; then stop start fi ;; *) echo $"Usage: $0 {start|stop|restart|condrestart|status}" ;; esac exit $RETVAL --- NEW FILE xorg-x11-drv-catalyst-legacy.spec --- %global atilibdir %{_libdir}/catalyst-legacy %global amdrun amd-driver-installer-catalyst-%{version}-legacy-linux-x86.x86_64.run %global debug_package %{nil} %global __strip /bin/true Name: xorg-x11-drv-catalyst-legacy Version: 13.1 Release: 1%{?dist} Summary: AMD's proprietary driver for ATI legacy graphic cards Group: User Interface/X Hardware Support License: Redistributable, no modification permitted URL: http://www.ati.com/support/drivers/linux/radeon-linux.html Source0: http://www2.ati.com/drivers/legacy/amd-driver-installer-catalyst-%{versio... Source1: http://developer.amd.com/downloads/xvba-sdk-0.74-404001.tar.gz Source2: catalyst-legacy-README.Fedora Source3: amdcccle.desktop Source4: catalyst-legacy-atieventsd.init Source5: catalyst-legacy-ati-powermode.sh Source6: catalyst-legacy-a-ac-aticonfig Source7: catalyst-legacy-a-lid-aticonfig Source8: 00-catalyst-legacy-modulepath.conf Source9: 01-catalyst-legacy-videodriver.conf BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n) %if 0%{?fedora} > 11 || 0%{?rhel} > 5 ExclusiveArch: i686 x86_64 %else 0%{?fedora} == 11 ExclusiveArch: i586 x86_64 %else ExclusiveArch: i386 x86_64 %endif Requires: catalyst-legacy-kmod >= %{version} # Needed in all nvidia or fglrx driver packages BuildRequires: desktop-file-utils # It seems rpaths were introduced into the amdcccle/amdnotifyui binary in 9.12 BuildRequires: chrpath %if 0%{?fedora} > 10 || 0%{?rhel} > 5 Requires: %{name}-libs%{_isa} = %{version}-%{release} %else Requires: %{name}-libs-%{_target_cpu} = %{version}-%{release} %endif Requires(post): chkconfig Requires(preun): chkconfig Provides: catalyst-legacy-kmod-common = %{version} Conflicts: xorg-x11-drv-nvidia Conflicts: xorg-x11-drv-catalyst Conflicts: xorg-x11-drv-nvidia-legacy Conflicts: xorg-x11-drv-nvidia-71xx Conflicts: xorg-x11-drv-nvidia-96xx Conflicts: xorg-x11-drv-nvidia-173xx Conflicts: xorg-x11-drv-nvidia-beta Conflicts: xorg-x11-drv-nvidia-newest Conflicts: xorg-x11-drv-nvidia-custom Conflicts: xorg-x11-drv-fglrx Obsoletes: catalyst-legacy-kmod < %{version} # ATI auto-generated RPMs Conflicts: ATI-fglrx Conflicts: ATI-fglrx-control-panel Conflicts: ATI-fglrx-devel Conflicts: kernel-module-ATI-fglrx Conflicts: ATI-fglrx-IA32-libs %{?filter_setup: %filter_from_provides /^libGL\.so/d; %filter_from_requires /^libGL\.so/d; %filter_setup } %description This package provides the legacy proprietary AMD display driver which allows for hardware accelerated rendering with ATI Mobility, FireGL and Desktop GPUs. Some of the Desktop and Mobility GPUs supported are the Radeon HD 2xxx series to the Radeon HD 6xxx series. For the full product support list, please consult the release notes for release %{version}. %package devel Summary: Development files for %{name} Group: Development/Libraries %if 0%{?fedora} > 10 || 0%{?rhel} > 5 Requires: %{name}-libs%{_isa} = %{version}-%{release} %else Requires: %{name}-libs-%{_target_cpu} = %{version}-%{release} %endif %description devel This package provides the development files of the %{name} package, such as OpenGL headers. %package libs Summary: Libraries for %{name} Group: User Interface/X Hardware Support Requires: %{name} = %{version}-%{release} Requires(post): ldconfig Provides: %{name}-libs-%{_target_cpu} = %{version}-%{release} %description libs This package provides the shared libraries for %{name}. %prep %setup -q -c -T # Unzip fglrx driver unzip %{SOURCE0} # Extract fglrx driver sh %{amdrun} --extract fglrx # Extract XvBA devel files mkdir amdxvba pushd amdxvba tar xfz %{SOURCE1} # rename docs mv -f LICENSE AMD_XvBA_LICENSE mv -f README AMD_XvBA_README popd # fix end line encoding sed -i "s|\r||g" fglrx/common/usr/share/doc/amdcccle/ccc_copyrights.txt # Create tarball of kmod data for use later tar -cjf catalyst-legacy-kmod-data-%{version}.tar.bz2 fglrx/common/usr/share/doc/fglrx/LICENSE.TXT \ fglrx/common/*/modules/fglrx/ \ fglrx/arch/*/*/modules/fglrx/ mkdir fglrxpkg %ifarch %{ix86} cp -r fglrx/common/* fglrx/xpic/* fglrx/arch/x86/* fglrxpkg/ %endif %ifarch x86_64 cp -r fglrx/common/* fglrx/xpic_64a/* fglrx/arch/x86_64/* fglrxpkg/ %endif # fix doc perms & copy README.Fedora find fglrxpkg/usr/share/doc/fglrx -type f -exec chmod 0644 {} \; install -pm 0644 %{SOURCE2} ./README.Fedora # Set the correct path for gdm's Xauth file before we install it in the loop below sed -i -e 's|GDM_AUTH_FILE=/var/lib/gdm/$1.Xauth|GDM_AUTH_FILE=/var/gdm/$1.Xauth|' fglrxpkg/etc/ati/authatieventsd.sh %build # Nothing to build echo "Nothing to build" %install rm -rf $RPM_BUILD_ROOT ./__doc set +x for file in $(cd fglrxpkg &> /dev/null; find . -type f | grep -v -e 'amdcccle.kdelnk$' -e 'amdcccle.desktop$' -e 'lib/modules/fglrx$' -e 'fireglcontrolpanel$' -e '/usr/share/doc/fglrx/' -e 'fglrx_panel_sources.tgz$' -e 'amdcccle.*.desktop$' -e 'amdcccle.*.kdelnk' -e 'fglrx_sample_source.tgz$' -e '^./lib/modules/fglrx' -e '/usr/share/icons/ccc_' -e '^./usr/share/ati/lib') do if [[ ! "/${file##}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} ./__doc/${file##./usr/share/doc/fglrx/} elif [[ ! "/${file##./usr/X11R6/%{_lib}/modules/drivers}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_libdir}/xorg/modules/drivers/${file##./usr/X11R6/%{_lib}/modules/drivers} elif [[ ! "/${file##./usr/X11R6/%{_lib}/modules/dri}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_prefix}/%{_lib}/dri/${file##./usr/X11R6/%{_lib}/modules/dri} elif [[ ! "/${file##./usr/X11R6/%{_lib}/modules/extensions/fglrx}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_libdir}/xorg/modules/extensions/catalyst-legacy/${file##./usr/X11R6/%{_lib}/modules/extensions/fglrx} elif [[ ! "/${file##./usr/X11R6/%{_lib}/modules/extensions}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_libdir}/xorg/modules/extensions/catalyst-legacy/${file##./usr/X11R6/%{_lib}/modules/extensions} elif [[ ! "/${file##./usr/X11R6/%{_lib}/modules}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_libdir}/xorg/modules/${file##./usr/X11R6/%{_lib}/modules} %ifarch %{ix86} elif [[ ! "/${file##./usr/X11R6/lib/modules/dri}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_prefix}/lib/dri/${file##./usr/X11R6/lib/modules/dri} %endif elif [[ ! "/${file##./usr/X11R6/include/X11/extensions}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_includedir}/fglrx/X11/extensions/${file##./usr/X11R6/include/X11/extensions} elif [[ ! "/${file##./usr/%{_lib}/fglrx}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{atilibdir}/${file##./usr/%{_lib}/fglrx} elif [[ ! "/${file##./usr/%{_lib}}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{atilibdir}/${file##./usr/%{_lib}/} elif [[ ! "/${file##./usr/X11R6/%{_lib}/fglrx}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{atilibdir}/${file##./usr/X11R6/%{_lib}/fglrx} elif [[ ! "/${file##./usr/X11R6/%{_lib}/}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{atilibdir}/${file##./usr/X11R6/%{_lib}/} elif [[ ! "/${file##./usr/X11R6/bin/}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_bindir}/${file##./usr/X11R6/bin/} elif [[ ! "/${file##./usr/bin/}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_sbindir}/${file##./usr/bin/} elif [[ ! "/${file##./usr/sbin/}" = "/${file}" ]] then install -D -p -m 0755 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_sbindir}/${file##./usr/sbin/} elif [[ ! "/${file##./etc/}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_sysconfdir}/${file##./etc/} elif [[ ! "/${file##./usr/include/}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_includedir}/fglrx/${file##./usr/include/} elif [[ ! "/${file##./usr/share/man/}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/%{_mandir}/${file##./usr/share/man/} elif [[ ! "/${file##./usr/share/ati/amdcccle}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/${file} elif [[ ! "/${file##./usr/share/doc/amdcccle}" = "/${file}" ]] then install -D -p -m 0644 fglrxpkg/${file} $RPM_BUILD_ROOT/${file} else echo ${file} found -- don\'t know how to handle exit 1 fi done set -x # Install XvBA headers install -D -p -m 0644 amdxvba/include/amdxvba.h $RPM_BUILD_ROOT%{_includedir}/fglrx # Remove switching scripts rm -f $RPM_BUILD_ROOT%{atilibdir}/switchlibGL rm -f $RPM_BUILD_ROOT%{atilibdir}/switchlibglx # ATI says this is a 64-bit binary, but it's not. rm -rf $RPM_BUILD_ROOT%{atilibdir}/libSlotMaximizerBe.so # Remove some 'fglrx-' prefixes mv $RPM_BUILD_ROOT%{atilibdir}/{fglrx-,}libGL.so.1.2 mv $RPM_BUILD_ROOT%{_libdir}/xorg/modules/extensions/catalyst-legacy/{fglrx-,}libglx.so # Move XvBA data file to correct location mkdir -p $RPM_BUILD_ROOT%{_prefix}/lib mv $RPM_BUILD_ROOT%{atilibdir}/libAMDXvBA.cap $RPM_BUILD_ROOT%{_prefix}/lib chmod 0644 $RPM_BUILD_ROOT%{_prefix}/lib/libAMDXvBA.cap # Change perms on static libs. Can't fathom how to do it nicely above. find $RPM_BUILD_ROOT%{atilibdir} -type f -name "*.a" -exec chmod 0644 '{}' \; # If we want versioned libs, then we need to change this and the loop above # to install the libs as soname.so.%%{version} ln -s libGL.so.1.2 $RPM_BUILD_ROOT%{atilibdir}/libGL.so.1 ln -s libGL.so.1.2 $RPM_BUILD_ROOT%{atilibdir}/libGL.so ln -s libfglrx_dm.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libfglrx_dm.so.1 ln -s libfglrx_dm.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libfglrx_dm.so ln -s libAMDXvBA.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libAMDXvBA.so.1 ln -s libAMDXvBA.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libAMDXvBA.so ln -s libXvBAW.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libXvBAW.so.1 ln -s libXvBAW.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libXvBAW.so ln -s libatiuki.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libatiuki.so.1 ln -s libatiuki.so.1.0 $RPM_BUILD_ROOT%{atilibdir}/libatiuki.so # move authatieventsd.sh to /usr/bin mv $RPM_BUILD_ROOT%{_sysconfdir}/ati/authatieventsd.sh $RPM_BUILD_ROOT%{_bindir} install -D -p -m 0644 fglrxpkg/usr/share/icons/ccc_large.xpm $RPM_BUILD_ROOT/%{_datadir}/icons/ccc_large.xpm install -D -p -m 0755 %{SOURCE4} $RPM_BUILD_ROOT%{_initrddir}/atieventsd install -D -p -m 0755 %{SOURCE5} $RPM_BUILD_ROOT%{_bindir}/ati-powermode.sh install -D -p -m 0644 %{SOURCE6} $RPM_BUILD_ROOT%{_sysconfdir}/acpi/events/a-ac-aticonfig.conf install -D -p -m 0644 %{SOURCE7} $RPM_BUILD_ROOT%{_sysconfdir}/acpi/events/a-lid-aticonfig.conf mkdir -p $RPM_BUILD_ROOT%{_datadir}/applications desktop-file-install --vendor rpmfusion \ --dir $RPM_BUILD_ROOT%{_datadir}/applications \ %{SOURCE3} # Install static driver dependant configuration files mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/X11/xorg.conf.d install -pm 0644 %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/X11/xorg.conf.d sed -i -e 's|@LIBDIR@|%{_libdir}|g' $RPM_BUILD_ROOT%{_sysconfdir}/X11/xorg.conf.d/00-catalyst-legacy-modulepath.conf touch -r %{SOURCE8} $RPM_BUILD_ROOT%{_sysconfdir}/X11/xorg.conf.d/00-catalyst-legacy-modulepath.conf install -pm 0644 %{SOURCE9} $RPM_BUILD_ROOT%{_sysconfdir}/X11/xorg.conf.d # Fix odd perms find fglrxpkg -type f -perm 0555 -exec chmod 0755 '{}' \; find fglrxpkg -type f -perm 0744 -exec chmod 0755 '{}' \; chmod 644 fglrxpkg/usr/src/ati/fglrx_sample_source.tgz find $RPM_BUILD_ROOT -type f -name '*.a' -exec chmod 0644 '{}' \; chmod 644 $RPM_BUILD_ROOT/%{_sysconfdir}/ati/*.xbm.example chmod 755 $RPM_BUILD_ROOT/%{_bindir}/*.sh # Remove rpaths (see comment on chrpath BR above) chrpath --delete $RPM_BUILD_ROOT%{_bindir}/amdcccle chrpath --delete $RPM_BUILD_ROOT%{_sbindir}/amdnotifyui # ld.so.conf.d file mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.conf.d echo "%{atilibdir}" > $RPM_BUILD_ROOT%{_sysconfdir}/ld.so.conf.d/catalyst-legacy-%{_lib}.conf %clean rm -rf $RPM_BUILD_ROOT %post # Update the user's version numbers in the AMD Control Center. if [ -f %{_sysconfdir}/amdpcsdb ];then ReleaseVersion=$(sed '/ReleaseVersion=S/!d; s/ReleaseVersion=S//' %{_sysconfdir}/ati/amdpcsdb.default 2>/dev/null) if [ -n "${ReleaseVersion}" ]; then %{_bindir}/aticonfig --del-pcs-key=LDC,ReleaseVersion >/dev/null 2>&1 %{_bindir}/aticonfig --set-pcs-str=LDC,ReleaseVersion,${ReleaseVersion} >/dev/null 2>&1 fi Catalyst_Version=$(sed '/Catalyst_Version=S/!d; s/Catalyst_Version=S//' %{_sysconfdir}/ati/amdpcsdb.default 2>/dev/null) if [ -n "${Catalyst_Version}" ]; then %{_bindir}/aticonfig --del-pcs-key=LDC,Catalyst_Version >/dev/null 2>&1 %{_bindir}/aticonfig --set-pcs-str=LDC,Catalyst_Version,${Catalyst_Version} >/dev/null 2>&1 fi fi ||: if [ "${1}" -eq 1 ]; then # Add init script(s) and start it /sbin/chkconfig --add atieventsd /sbin/service atieventsd start >/dev/null 2>&1 if [ -x /sbin/grubby ] ; then GRUBBYLASTKERNEL=`/sbin/grubby --default-kernel` /sbin/grubby --update-kernel=${GRUBBYLASTKERNEL} --args='radeon.modeset=0' &>/dev/null fi fi ||: %post libs -p /sbin/ldconfig %preun if [ "${1}" -eq 0 ]; then /sbin/service atieventsd stop >/dev/null 2>&1 /sbin/chkconfig --del atieventsd if [ -x /sbin/grubby ] ; then # remove rdblacklist from boot params in case they installed with v10.7, which blacklisted radeon upon installation GRUBBYLASTKERNEL=`/sbin/grubby --default-kernel` /sbin/grubby --update-kernel=${GRUBBYLASTKERNEL} --remove-args='radeon.modeset=0 rdblacklist=radeon' &>/dev/null fi fi ||: %postun libs -p /sbin/ldconfig %files %defattr(-,root,root,-) %doc fglrxpkg/usr/share/doc/fglrx/* README.Fedora %dir %{_sysconfdir}/ati/ %doc %{_docdir}/amdcccle/ccc_copyrights.txt %config(noreplace) %{_sysconfdir}/security/console.apps/amdcccle-su %config %{_sysconfdir}/X11/xorg.conf.d/*catalyst*.conf %{_sysconfdir}/ati/atiogl.xml %{_sysconfdir}/ati/logo.xbm.example %{_sysconfdir}/ati/logo_mask.xbm.example %{_sysconfdir}/ati/amdpcsdb.default # OpenCL files %dir %{_sysconfdir}/OpenCL %dir %{_sysconfdir}/OpenCL/vendors %config %{_sysconfdir}/OpenCL/vendors/amd*.icd # These next two files control "supported hardware" verification %{_sysconfdir}/ati/signature %{_sysconfdir}/ati/control %config(noreplace) %{_sysconfdir}/acpi/events/*aticonfig.conf %{_initrddir}/* %{_sbindir}/* %{_bindir}/* # no_multilib %{_libdir}/xorg/modules/drivers/fglrx_drv.so %{_libdir}/xorg/modules/linux/libfglrxdrm.so %{_libdir}/xorg/modules/extensions/catalyst-legacy/ %{_libdir}/xorg/modules/*.so %{_prefix}/lib/libAMDXvBA.cap # /no_multilib %{_datadir}/applications/*amdcccle.desktop %{_datadir}/ati/amdcccle/* %{_datadir}/icons/* %{_mandir}/man[1-9]/atieventsd.* %files libs %defattr(-,root,root,-) %config %{_sysconfdir}/ld.so.conf.d/catalyst-legacy-%{_lib}.conf %dir %{atilibdir} %{atilibdir}/*.so* %{_libdir}/dri/ %files devel %defattr(-,root,root,-) %doc fglrxpkg/usr/src/ati/fglrx_sample_source.tgz %doc amdxvba/doc/AMD_XvBA_Spec_v0_74_01_AES_2.pdf %doc amdxvba/AMD_XvBA_LICENSE amdxvba/AMD_XvBA_README %{atilibdir}/*.a %{_includedir}/fglrx/ # enumerate development symlinks %{atilibdir}/libGL.so %{atilibdir}/libfglrx_dm.so %{atilibdir}/libAMDXvBA.so %{atilibdir}/libXvBAW.so %{atilibdir}/libatiuki.so %changelog * Mon Feb 04 2013 Leigh Scott <leigh123linux(a)googlemail.com&gt; - 13.1-1 - Update to Catalyst legacy (internal version 13.1 8.97.100.7) * Fri Sep 21 2012 Leigh Scott <leigh123linux(a)googlemail.com&gt; - 12.6-3 - make review changes * Wed Aug 22 2012 Leigh Scott <leigh123linux(a)googlemail.com&gt; - 12.6-2 - make review changes * Fri Aug 17 2012 Leigh Scott <leigh123linux(a)googlemail.com&gt; - 12.6-1 - 12.6 released - Change how the amd source is unpacked - Fix source url - change %%define to %%global * Sun Jun 24 2012 leigh scott <leigh123linux(a)googlemail.com&gt; - 12.6-0.1 - Based on xorg-x11-drv-catalyst - Update to Catalyst legacy 12.6 beta (internal version 8.97.100.3) Index: .cvsignore =================================================================== RCS file: /cvs/nonfree/rpms/xorg-x11-drv-catalyst-legacy/F-18/.cvsignore,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- .cvsignore 29 Nov 2012 17:25:32 -0000 1.1 +++ .cvsignore 4 Feb 2013 16:07:36 -0000 1.2 @@ -0,0 +1 @@ +amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip Index: sources =================================================================== RCS file: /cvs/nonfree/rpms/xorg-x11-drv-catalyst-legacy/F-18/sources,v retrieving revision 1.1 retrieving revision 1.2 diff -u -r1.1 -r1.2 --- sources 29 Nov 2012 17:25:32 -0000 1.1 +++ sources 4 Feb 2013 16:07:37 -0000 1.2 @@ -0,0 +1,2 @@ +b8f56bc55aa70cb19dd12857fdc184cc xvba-sdk-0.74-404001.tar.gz +c07fd1332abe4c742a9a0d0e0d0a90de amd-driver-installer-catalyst-13.1-legacy-linux-x86.x86_64.zip