7:59 p.m.
Need some help here. When I did a local mock build of mplayer
1.0-0.139 it built fine but now I'm getting this error with 1.1:
fmt-conversion.c:68: error: 'PIX_FMT_YUVA422P' undeclared here (not in
a function)
Any ideas?
Thanks,
Richard
---------- Forwarded message ----------
From: <rpmfusion-buildsys(a)lists.rpmfusion.org>
Date: Mon, Jul 2, 2012 at 2:44 PM
Subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
To: hobbes1069(a)gmail.com
Job failed on arch x86_64
Build logs may be found at
http://buildsys.rpmfusion.org/logs/el-6-rpmfusion_free/13876-mplayer-1.1-...
-------------------------------------------------
codec-cfg.c:990: warning: no previous prototype for 'skiphtml'
cc -MD -MP -Wundef -Wall -Wno-switch -Wno-parentheses -Wpointer-arith
-Wredundant-decls -Wstrict-prototypes -Wmissing-prototypes
-Wdisabled-optimization -Wno-pointer-sign
-Wdeclaration-after-statement -std=gnu99
-Werror-implicit-function-declaration -O4 -march=x86-64 -mtune=generic
-pipe -ffast-math -fomit-frame-pointer -fno-tree-vectorize
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -I.
-Iffmpeg -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
-D_REENTRANT -I/usr/include/ -D_REENTRANT
-I/usr/include/freetype2 -I/usr/include/bs2b -I/usr/include/ffmpeg
-I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include
-I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0
-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
-I/usr/include/pixman-1 -I/usr/include/freetype2
-I/usr/include/libpng12 -c -o edl.o edl.c
cc -MD -MP -Wundef -Wall -Wno-switch -Wno-parentheses -Wpointer-arith
-Wredundant-decls -Wstrict-prototypes -Wmissing-prototypes
-Wdisabled-optimization -Wno-pointer-sign
-Wdeclaration-after-statement -std=gnu99
-Werror-implicit-function-declaration -O4 -march=x86-64 -mtune=generic
-pipe -ffast-math -fomit-frame-pointer -fno-tree-vectorize
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -I.
-Iffmpeg -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
-D_REENTRANT -I/usr/include/ -D_REENTRANT
-I/usr/include/freetype2 -I/usr/include/bs2b -I/usr/include/ffmpeg
-I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include
-I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0
-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
-I/usr/include/pixman-1 -I/usr/include/freetype2
-I/usr/include/libpng12 -c -o fmt-conversion.o fmt-conversion.c
cc -MD -MP -Wundef -Wall -Wno-switch -Wno-parentheses -Wpointer-arith
-Wredundant-decls -Wstrict-prototypes -Wmissing-prototypes
-Wdisabled-optimization -Wno-pointer-sign
-Wdeclaration-after-statement -std=gnu99
-Werror-implicit-function-declaration -O4 -march=x86-64 -mtune=generic
-pipe -ffast-math -fomit-frame-pointer -fno-tree-vectorize
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE64_SOURCE -I.
-Iffmpeg -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
-D_REENTRANT -I/usr/include/ -D_REENTRANT
-I/usr/include/freetype2 -I/usr/include/bs2b -I/usr/include/ffmpeg
-I/usr/include/gtk-2.0 -I/usr/lib64/gtk-2.0/include
-I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0
-I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include
-I/usr/include/pixman-1 -I/usr/include/freetype2
-I/usr/include/libpng12 -c -o m_config.o m_config.c
fmt-conversion.c:68: error: 'PIX_FMT_YUVA422P' undeclared here (not in
a function)
fmt-conversion.c:69: error: 'PIX_FMT_YUVA444P' undeclared here (not in
a function)
make: *** [fmt-conversion.o] Error 1
make: *** Waiting for unfinished jobs....
m_config.c: In function 'm_config_add_option':
m_config.c:325: warning: assignment discards qualifiers from pointer target type
RPM build errors:
error: Bad exit status from /var/tmp/rpm-tmp.hhLwfb (%build)
Bad exit status from /var/tmp/rpm-tmp.hhLwfb (%build)
Child return code was: 1
EXCEPTION: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64
--nodeps
builddir/build/SPECS/mplayer.spec']
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/mockbuild/trace_decorator.py",
line 70, in trace
result = func(*args, **kw)
File "/usr/lib/python2.6/site-packages/mockbuild/util.py", line 352, in do
raise mockbuild.exception.Error, ("Command failed. See logs for
output.\n # %s" % (command,), child.returncode)
Error: Command failed. See logs for output.
# ['bash', '--login', '-c', 'rpmbuild -bb --target x86_64
--nodeps
builddir/build/SPECS/mplayer.spec']
LEAVE do --> EXCEPTION RAISED
8:28 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
2012/7/2 Richard Shaw <hobbes1069(a)gmail.com>:
Need some help here. When I did a local mock build of mplayer
1.0-0.139 it built fine but now I'm getting this error with 1.1:
fmt-conversion.c:68: error: 'PIX_FMT_YUVA422P' undeclared here (not in
a function)
Any ideas?
You constantly fail to understand what I mean!
Didn't I said that you should build EL-6 from known packages ?
mplayer is tight to ffmpeg version and you have created an untested combination.
Now what ? shall I remove you from the ACL of package , because you
obviously haven't even tested them ?
Nicolas (kwizart)
8:34 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On Mon, Jul 2, 2012 at 3:28 PM, Nicolas Chauvet <kwizart(a)gmail.com> wrote:
2012/7/2 Richard Shaw <hobbes1069(a)gmail.com>:
> Need some help here. When I did a local mock build of mplayer
> 1.0-0.139 it built fine but now I'm getting this error with 1.1:
>
> fmt-conversion.c:68: error: 'PIX_FMT_YUVA422P' undeclared here (not in
> a function)
>
> Any ideas?
You constantly fail to understand what I mean!
Didn't I said that you should build EL-6 from known packages ?
mplayer is tight to ffmpeg version and you have created an untested combination.
Honestly, I'm sorry I don't know any other language than English, but
sometimes you are difficult for me to understand even after repeated
readings.
I didn't update the mplayer version. It is as it was created. Should I
have downgraded it? If you already knew this, you could have copied in
the working version rather than devel.
Now what ? shall I remove you from the ACL of package , because you
obviously haven't even tested them ?
I don't care at this point. I only worked on it because I thought
someone would like to have mplayer available in EL-6. If someone else
wants it, they can have it.
Richard
8:55 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
2012/7/2 Richard Shaw <hobbes1069(a)gmail.com>:
On Mon, Jul 2, 2012 at 3:28 PM, Nicolas Chauvet
<kwizart(a)gmail.com> wrote:
> 2012/7/2 Richard Shaw <hobbes1069(a)gmail.com>:
>> Need some help here. When I did a local mock build of mplayer
>> 1.0-0.139 it built fine but now I'm getting this error with 1.1:
>>
>> fmt-conversion.c:68: error: 'PIX_FMT_YUVA422P' undeclared here (not in
>> a function)
>>
>> Any ideas?
> You constantly fail to understand what I mean!
>
> Didn't I said that you should build EL-6 from known packages ?
> mplayer is tight to ffmpeg version and you have created an untested combination.
Honestly, I'm sorry I don't know any other language than English, but
sometimes you are difficult for me to understand even after repeated
readings.
I didn't update the mplayer version. It is as it was created. Should I
have downgraded it? If you already knew this, you could have copied in
the working version rather than devel.
Ok, so the creation of a branch means that "devel is copied into the
new branch. (EL-6).
So you would better know the version you really want before to
randomly kick a build into EL-6.
What I expect is that ffmpeg in EL-6 will better match with mplayer in
F-17 as the ffmpeg version is the same. But others components are
involved, so you have to test a mock built and do a minimal runtime
test.
I also would suggest to downgrade mpg123 to the version of F-17. (so
deleting your previous build), for the same reason as ffmpeg.
Nicolas (kwizart)
9:11 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On Mon, Jul 2, 2012 at 3:55 PM, Nicolas Chauvet <kwizart(a)gmail.com> wrote:
What I expect is that ffmpeg in EL-6 will better match with mplayer
in
F-17 as the ffmpeg version is the same. But others components are
involved, so you have to test a mock built and do a minimal runtime
test.
Building now, but I have limited ability to actually test the
resulting binary since I don't have a EL6 install available.
I also would suggest to downgrade mpg123 to the version of F-17. (so
deleting your previous build), for the same reason as ffmpeg.
Should we then at least update to the latest patch level? (1.13.8)
Richard
9:23 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
The mplayer from F-17 branch built fine locally against mpg123-1.13.7.
Richard
9:26 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On 07/02/2012 03:11 PM, Richard Shaw wrote:
On Mon, Jul 2, 2012 at 3:55 PM, Nicolas Chauvet
<kwizart(a)gmail.com> wrote:
> What I expect is that ffmpeg in EL-6 will better match with mplayer in
> F-17 as the ffmpeg version is the same. But others components are
> involved, so you have to test a mock built and do a minimal runtime
> test.
Building now, but I have limited ability to actually test the
resulting binary since I don't have a EL6 install available.
I'd be happy to test any mplayer packages for EL6. Is what is in el6
updates-testing the latest, or are there other builds needing testing?
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA, Boulder Office FAX: 303-415-9702
3380 Mitchell Lane orion(a)nwra.com
Boulder, CO 80301 http://www.nwra.com
6:37 p.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On 07/11/2012 03:26 PM, Orion Poplawski wrote:
On 07/02/2012 03:11 PM, Richard Shaw wrote:
> On Mon, Jul 2, 2012 at 3:55 PM, Nicolas Chauvet <kwizart(a)gmail.com> wrote:
>> What I expect is that ffmpeg in EL-6 will better match with mplayer in
>> F-17 as the ffmpeg version is the same. But others components are
>> involved, so you have to test a mock built and do a minimal runtime
>> test.
>
> Building now, but I have limited ability to actually test the
> resulting binary since I don't have a EL6 install available.
I'd be happy to test any mplayer packages for EL6. Is what is in el6
updates-testing the latest, or are there other builds needing testing?
mplayer and mencoder are working fine for me on EL6. Unfortunately transcode
is not (https://bugzilla.rpmfusion.org/show_bug.cgi?id=2417), but hopefully
that can be fixed without affecting mplayer.
--
Orion Poplawski
Technical Manager 303-415-9701 x222
NWRA, Boulder Office FAX: 303-415-9702
3380 Mitchell Lane orion(a)nwra.com
Boulder, CO 80301 http://www.nwra.com
12:56 a.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On Mon, Jul 2, 2012 at 1:59 PM, Richard Shaw <hobbes1069(a)gmail.com> wrote:
Need some help here. When I did a local mock build of mplayer
1.0-0.139 it built fine but now I'm getting this error with 1.1:
We should probably stick with mplayer-1.0-0.139. I've been using
mplayer-1.0-0.139.20120205svn.el6.i686 on EL-6, built against RPM
Fusion's ffmpeg-0.10.2-3.el6.i686, without issues. Just watched a
movie last night in fact.
- Ken
2:36 a.m.
New subject: Build Error (Job 13876): mplayer-1_1-1_el6 on el-6-rpmfusion_free
On Mon, Jul 2, 2012 at 7:56 PM, Ken Dreyer <ktdreyer(a)ktdreyer.com> wrote:
On Mon, Jul 2, 2012 at 1:59 PM, Richard Shaw
<hobbes1069(a)gmail.com> wrote:
> Need some help here. When I did a local mock build of mplayer
> 1.0-0.139 it built fine but now I'm getting this error with 1.1:
We should probably stick with mplayer-1.0-0.139. I've been using
mplayer-1.0-0.139.20120205svn.el6.i686 on EL-6, built against RPM
Fusion's ffmpeg-0.10.2-3.el6.i686, without issues. Just watched a
movie last night in fact.
Yup, I tried 1.0-0.140 from F-17 and it built fine in a local mock build.
Richard
4517
days inactive
4531
days old
rpmfusion-developers@lists.rpmfusion.org
9 comments
4 participants
participants (4)
-
Ken Dreyer -
Nicolas Chauvet -
Orion Poplawski -
Richard Shaw