10:36 a.m.
Hi Richard (and others): You may have seen some of the barrage of posts
I've put up during the last week following my multi-component system
changes. I now have MythTV 0.26 from rpmfusion installed under
ScientificLinux6.4 and Fedora 17, and in most respects they work very
well; thanks! But on both of them the recording of radio from dvb-t is
broken. Before I try rebuilding for myself in the new environment, can
I ask if you have anything in the pipeline?
Your existing builds were made only a few days after the commit that
created this problem, and a few days before another that is supposed to
have fixed it. I did rebuilds in the ATrpms environment after that, and
they needed new changes in the specfile as well, but then other - and I
think unrelated - problems cropped up.
http://cvs.rpmfusion.org/viewvc/rpms/mythtv/F-17/mythtv.spec?revision=1.1...
http://www.gossamer-threads.com/lists/atrpms/users/16568
http://www.gossamer-threads.com/lists/mythtv/users/542853#542853
Best wishes,
John P
1:22 p.m.
On Fri, Apr 26, 2013 at 5:36 AM, John Pilkington <J.Pilk(a)tesco.net> wrote:
Hi Richard (and others): You may have seen some of the barrage of
posts
I've put up during the last week following my multi-component system
changes. I now have MythTV 0.26 from rpmfusion installed under
ScientificLinux6.4 and Fedora 17, and in most respects they work very well;
thanks! But on both of them the recording of radio from dvb-t is broken.
Before I try rebuilding for myself in the new environment, can I ask if
you have anything in the pipeline?
I started some local test builds, which I like to do before building for
RPM Fusion, but haven't gotten a chance to install them on my F17 FE/BE
box. I'll see if I can get them done and get a little testing done this
weekend. If all goes well I'll kick-off builds for RPM Fusion.
Thanks,
Richard
1:27 p.m.
On 26/04/13 14:22, Richard Shaw wrote:
On Fri, Apr 26, 2013 at 5:36 AM, John Pilkington
<J.Pilk(a)tesco.net
<mailto:J.Pilk@tesco.net>> wrote:
Hi Richard (and others): You may have seen some of the barrage of
posts I've put up during the last week following my multi-component
system changes. I now have MythTV 0.26 from rpmfusion installed
under ScientificLinux6.4 and Fedora 17, and in most respects they
work very well; thanks! But on both of them the recording of radio
from dvb-t is broken. Before I try rebuilding for myself in the new
environment, can I ask if you have anything in the pipeline?
I started some local test builds, which I like to do before building for
RPM Fusion, but haven't gotten a chance to install them on my F17 FE/BE
box. I'll see if I can get them done and get a little testing done this
weekend. If all goes well I'll kick-off builds for RPM Fusion.
Thanks,
Richard
Great. Thanks :-) Good luck!
John
9:54 p.m.
If you're running F18 you may need to wait a bit but builds for all over
releases (including EL6) are done. Not sure when Nicolas will do a package
run but you can manually download them if you don't want to wait:
http://buildsys.rpmfusion.org/plague-results/
Keep in mind they're not signed yet.
Thanks,
Richard
10:56 p.m.
On 27/04/13 22:54, Richard Shaw wrote:
If you're running F18 you may need to wait a bit but builds for
all over
releases (including EL6) are done. Not sure when Nicolas will do a
package run but you can manually download them if you don't want to wait:
http://buildsys.rpmfusion.org/plague-results/
Keep in mind they're not signed yet.
Thanks,
Richard
Installed on SL6 i686 laptop and radio recording works again. Bedtime
now. Many thanks.
John
12:30 p.m.
On 27/04/13 23:56, John Pilkington wrote:
On 27/04/13 22:54, Richard Shaw wrote:
> If you're running F18 you may need to wait a bit but builds for all over
> releases (including EL6) are done. Not sure when Nicolas will do a
> package run but you can manually download them if you don't want to wait:
>
> http://buildsys.rpmfusion.org/plague-results/
>
> Keep in mind they're not signed yet.
>
> Thanks,
> Richard
Installed on SL6 i686 laptop and radio recording works again. Bedtime
now. Many thanks.
And f17.x86_64 too. No problems in installing, seems to be working
well. Thanks again.
John
8:33 a.m.
Hi Richard: I've just FedUp-ed from F17 to F18 and thought I had seen a
post about a Myth rebuild - but find it was just mythweb. Any chance of
a new spin?
0.26.1 looks as if it might have fixed a few bugs that bite me, and
although it seems to be just a fairly arbitrary point in the evolution
of 0.26-fixes it would be good to see it, or something later, in the repo.
Cheers,
John P
12:45 a.m.
I'm out of town at the moment but shouldn't be a problem i'm the next
couple of days.
On Aug 17, 2013 3:40 AM, "John Pilkington" <J.Pilk(a)tesco.net> wrote:
Hi Richard: I've just FedUp-ed from F17 to F18 and thought I had
seen a
post about a Myth rebuild - but find it was just mythweb. Any chance of a
new spin?
0.26.1 looks as if it might have fixed a few bugs that bite me, and
although it seems to be just a fairly arbitrary point in the evolution of
0.26-fixes it would be good to see it, or something later, in the repo.
Cheers,
John P
7:08 a.m.
On Sat 17/08/2013 6:33 PM, John Pilkington wrote:
Hi Richard: I've just FedUp-ed from F17 to F18 and thought I had
seen a post about a Myth
rebuild - but find it was just mythweb. Any chance of a new spin?
0.26.1 looks as if it might have fixed a few bugs that bite me, and although it seems to
be just a fairly arbitrary point in the evolution of 0.26-fixes it would be good to see
it, or something later, in the repo.
Cheers,
John P
.
How did the upgrade go, as I'm thinking I should do the same shortly.
Paul
8:22 a.m.
On 18/08/13 08:08, Paul wrote:
On Sat 17/08/2013 6:33 PM, John Pilkington wrote:
> Hi Richard: I've just FedUp-ed from F17 to F18 and thought I had seen
> a post about a Myth
> rebuild - but find it was just mythweb. Any chance of a new spin?
>
> 0.26.1 looks as if it might have fixed a few bugs that bite me, and
> although it seems to
> be just a fairly arbitrary point in the evolution of 0.26-fixes it
> would be good to see
> it, or something later, in the repo.
>
> Cheers,
>
> John P
> .
>
How did the upgrade go, as I'm thinking I should do the same shortly.
Paul
No problem with the upgrade, starting from a fully updated system with
all relevant repos enabled. Really very impressive, but the screen
display after the reboot into it was useless; only a static blue bar
while intense disk activity went on for around 90 minutes. Hitting
'escape' brought up the rolling upgrade log, but I only realised I could
do that after a long time watching nothing change and wondering about
infinite loops.
After the upgrade UPnP didn't work, but disabling the firewalld service
and re-enabling iptables seems to have fixed that. See post in myth-users.
The mouse is being a bit skittish too, but it was doing that before.
Finally, back to Richard. I would quite like to update the sl6 laptop
for testing before committing the F18 box. Please... :-)
John
1:45 p.m.
Ok, I'm back in town so hopefully I can find some time to kick off a newer
build. I've been testing one at home for about a week so the question is,
should I push that one or go ahead and grab any new commits since then :)
Richard
2:17 p.m.
Ok, I decided I would go ahead and push new builds of 0.26.1 for both
mythtv and mythweb... Doing local test builds first but should be available
in the next few days.
Richard
4124
days inactive
4240
days old
rpmfusion-users@lists.rpmfusion.org
11 comments
3 participants
participants (3)
-
John Pilkington -
Paul Wilson -
Richard Shaw