[sysadmin-notify] [ansible] Update mail.cf from external datacenter

commit 6fdd0538b7b8cc9bd16ac7640352aee4dc960389 Author: Nicolas Chauvet <kwizart(a)gmail.com&gt; Date: Fri Feb 15 16:59:52 2019 +0100 Update mail.cf from external datacenter roles/base/files/postfix/main.cf/main.cf.linaro | 29 +- roles/base/files/postfix/main.cf/main.cf.osuosl | 29 +- roles/base/files/postfix/main.cf/main.cf.scaleway | 29 +- roles/base/files/postfix/main.cf/main.cf.virt | 704 +++++++++++++++++++++ 4 files changed, 773 insertions(+), 18 deletions(-) --- diff --git a/roles/base/files/postfix/main.cf/main.cf.linaro b/roles/base/files/postfix/main.cf/main.cf.linaro index 03447fd..387b677 100644 --- a/roles/base/files/postfix/main.cf/main.cf.linaro +++ b/roles/base/files/postfix/main.cf/main.cf.linaro @@ -1,4 +1,3 @@ -# "false" # Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command: "man 5 postconf"). @@ -11,6 +10,8 @@ # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. +# Custom rules + # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for @@ -42,6 +43,12 @@ command_directory = /usr/sbin # daemon_directory = /usr/libexec/postfix +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + # QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue @@ -70,6 +77,9 @@ mail_owner = postfix #myhostname = host.domain.tld #myhostname = virtual.domain.tld + +smtp_helo_name = $myhostname + # The mydomain parameter specifies the local internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration @@ -77,6 +87,8 @@ mail_owner = postfix # #mydomain = domain.tld +mydomain = rpmfusion.org + # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted @@ -93,7 +105,6 @@ mail_owner = postfix #myorigin = $myhostname #myorigin = $mydomain -mydomain = rpmfusion.org myorigin = rpmfusion.org # RECEIVING MAIL @@ -313,8 +324,8 @@ unknown_local_recipient_reject_code = 550 #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] -relayhost = [192.168.182.1] +relayhost = [192.168.182.1] # REJECTING UNKNOWN RELAY USERS # @@ -673,15 +684,21 @@ manpage_directory = /usr/share/man # sample_directory: The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # -sample_directory = /usr/share/doc/postfix-2.4.5/samples +sample_directory = /usr/share/doc/postfix-2.10.1/samples # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES +readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES + +# Enable IPv4, and IPv6 if supported +inet_protocols = ipv4 # add this to new postfix to get it to add proper message-id and other # headers to outgoing emails via the gateway. +smtpd_relay_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unauth_destination message_size_limit = 20971520 -#inet_protocols = ipv4 + diff --git a/roles/base/files/postfix/main.cf/main.cf.osuosl b/roles/base/files/postfix/main.cf/main.cf.osuosl index 03447fd..387b677 100644 --- a/roles/base/files/postfix/main.cf/main.cf.osuosl +++ b/roles/base/files/postfix/main.cf/main.cf.osuosl @@ -1,4 +1,3 @@ -# "false" # Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command: "man 5 postconf"). @@ -11,6 +10,8 @@ # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. +# Custom rules + # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for @@ -42,6 +43,12 @@ command_directory = /usr/sbin # daemon_directory = /usr/libexec/postfix +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + # QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue @@ -70,6 +77,9 @@ mail_owner = postfix #myhostname = host.domain.tld #myhostname = virtual.domain.tld + +smtp_helo_name = $myhostname + # The mydomain parameter specifies the local internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration @@ -77,6 +87,8 @@ mail_owner = postfix # #mydomain = domain.tld +mydomain = rpmfusion.org + # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted @@ -93,7 +105,6 @@ mail_owner = postfix #myorigin = $myhostname #myorigin = $mydomain -mydomain = rpmfusion.org myorigin = rpmfusion.org # RECEIVING MAIL @@ -313,8 +324,8 @@ unknown_local_recipient_reject_code = 550 #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] -relayhost = [192.168.182.1] +relayhost = [192.168.182.1] # REJECTING UNKNOWN RELAY USERS # @@ -673,15 +684,21 @@ manpage_directory = /usr/share/man # sample_directory: The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # -sample_directory = /usr/share/doc/postfix-2.4.5/samples +sample_directory = /usr/share/doc/postfix-2.10.1/samples # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES +readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES + +# Enable IPv4, and IPv6 if supported +inet_protocols = ipv4 # add this to new postfix to get it to add proper message-id and other # headers to outgoing emails via the gateway. +smtpd_relay_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unauth_destination message_size_limit = 20971520 -#inet_protocols = ipv4 + diff --git a/roles/base/files/postfix/main.cf/main.cf.scaleway b/roles/base/files/postfix/main.cf/main.cf.scaleway index 03447fd..387b677 100644 --- a/roles/base/files/postfix/main.cf/main.cf.scaleway +++ b/roles/base/files/postfix/main.cf/main.cf.scaleway @@ -1,4 +1,3 @@ -# "false" # Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command: "man 5 postconf"). @@ -11,6 +10,8 @@ # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. +# Custom rules + # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for @@ -42,6 +43,12 @@ command_directory = /usr/sbin # daemon_directory = /usr/libexec/postfix +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + # QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue @@ -70,6 +77,9 @@ mail_owner = postfix #myhostname = host.domain.tld #myhostname = virtual.domain.tld + +smtp_helo_name = $myhostname + # The mydomain parameter specifies the local internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration @@ -77,6 +87,8 @@ mail_owner = postfix # #mydomain = domain.tld +mydomain = rpmfusion.org + # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted @@ -93,7 +105,6 @@ mail_owner = postfix #myorigin = $myhostname #myorigin = $mydomain -mydomain = rpmfusion.org myorigin = rpmfusion.org # RECEIVING MAIL @@ -313,8 +324,8 @@ unknown_local_recipient_reject_code = 550 #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] -relayhost = [192.168.182.1] +relayhost = [192.168.182.1] # REJECTING UNKNOWN RELAY USERS # @@ -673,15 +684,21 @@ manpage_directory = /usr/share/man # sample_directory: The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # -sample_directory = /usr/share/doc/postfix-2.4.5/samples +sample_directory = /usr/share/doc/postfix-2.10.1/samples # readme_directory: The location of the Postfix README files. # -readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES +readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES + +# Enable IPv4, and IPv6 if supported +inet_protocols = ipv4 # add this to new postfix to get it to add proper message-id and other # headers to outgoing emails via the gateway. +smtpd_relay_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unauth_destination message_size_limit = 20971520 -#inet_protocols = ipv4 + diff --git a/roles/base/files/postfix/main.cf/main.cf.virt b/roles/base/files/postfix/main.cf/main.cf.virt new file mode 100644 index 0000000..387b677 --- /dev/null +++ b/roles/base/files/postfix/main.cf/main.cf.virt @@ -0,0 +1,704 @@ +# Global Postfix configuration file. This file lists only a subset +# of all parameters. For the syntax, and for a complete parameter +# list, see the postconf(5) manual page (command: "man 5 postconf"). +# +# For common configuration examples, see BASIC_CONFIGURATION_README +# and STANDARD_CONFIGURATION_README. To find these documents, use +# the command "postconf html_directory readme_directory", or go to +# http://www.postfix.org/. +# +# For best results, change no more than 2-3 parameters at a time, +# and test if Postfix still works after every change. + +# Custom rules + +# SOFT BOUNCE +# +# The soft_bounce parameter provides a limited safety net for +# testing. When soft_bounce is enabled, mail will remain queued that +# would otherwise bounce. This parameter disables locally-generated +# bounces, and prevents the SMTP server from rejecting mail permanently +# (by changing 5xx replies into 4xx replies). However, soft_bounce +# is no cure for address rewriting mistakes or mail routing mistakes. +# +#soft_bounce = no + +# LOCAL PATHNAME INFORMATION +# +# The queue_directory specifies the location of the Postfix queue. +# This is also the root directory of Postfix daemons that run chrooted. +# See the files in examples/chroot-setup for setting up Postfix chroot +# environments on different UNIX systems. +# +queue_directory = /var/spool/postfix + +# The command_directory parameter specifies the location of all +# postXXX commands. +# +command_directory = /usr/sbin + +# The daemon_directory parameter specifies the location of all Postfix +# daemon programs (i.e. programs listed in the master.cf file). This +# directory must be owned by root. +# +daemon_directory = /usr/libexec/postfix + +# The data_directory parameter specifies the location of Postfix-writable +# data files (caches, random numbers). This directory must be owned +# by the mail_owner account (see below). +# +data_directory = /var/lib/postfix + +# QUEUE AND PROCESS OWNERSHIP +# +# The mail_owner parameter specifies the owner of the Postfix queue +# and of most Postfix daemon processes. Specify the name of a user +# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS +# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In +# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED +# USER. +# +mail_owner = postfix + +# The default_privs parameter specifies the default rights used by +# the local delivery agent for delivery to external file or command. +# These rights are used in the absence of a recipient user context. +# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. +# +#default_privs = nobody + +# INTERNET HOST AND DOMAIN NAMES +# +# The myhostname parameter specifies the internet hostname of this +# mail system. The default is to use the fully-qualified domain name +# from gethostname(). $myhostname is used as a default value for many +# other configuration parameters. +# +#myhostname = host.domain.tld +#myhostname = virtual.domain.tld + + +smtp_helo_name = $myhostname + +# The mydomain parameter specifies the local internet domain name. +# The default is to use $myhostname minus the first component. +# $mydomain is used as a default value for many other configuration +# parameters. +# +#mydomain = domain.tld + +mydomain = rpmfusion.org + +# SENDING MAIL +# +# The myorigin parameter specifies the domain that locally-posted +# mail appears to come from. The default is to append $myhostname, +# which is fine for small sites. If you run a domain with multiple +# machines, you should (1) change this to $mydomain and (2) set up +# a domain-wide alias database that aliases each user to +# user(a)that.users.mailhost. +# +# For the sake of consistency between sender and recipient addresses, +# myorigin also specifies the default domain name that is appended +# to recipient addresses that have no @domain part. +# +#myorigin = $myhostname +#myorigin = $mydomain + +myorigin = rpmfusion.org + +# RECEIVING MAIL + +# The inet_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on. By default, +# the software claims all active interfaces on the machine. The +# parameter also controls delivery of mail to user(a)[ip.address]. +# +# See also the proxy_interfaces parameter, for network addresses that +# are forwarded to us via a proxy or network address translator. +# +# Note: you need to stop/start Postfix when this parameter changes. +# +#inet_interfaces = all +#inet_interfaces = $myhostname +#inet_interfaces = $myhostname, localhost +inet_interfaces = all + +# The proxy_interfaces parameter specifies the network interface +# addresses that this mail system receives mail on by way of a +# proxy or network address translation unit. This setting extends +# the address list specified with the inet_interfaces parameter. +# +# You must specify your proxy/NAT addresses when your system is a +# backup MX host for other domains, otherwise mail delivery loops +# will happen when the primary MX host is down. +# +#proxy_interfaces = +#proxy_interfaces = 1.2.3.4 + +# The mydestination parameter specifies the list of domains that this +# machine considers itself the final destination for. +# +# These domains are routed to the delivery agent specified with the +# local_transport parameter setting. By default, that is the UNIX +# compatible delivery agent that lookups all recipients in /etc/passwd +# and /etc/aliases or their equivalent. +# +# The default is $myhostname + localhost.$mydomain. On a mail domain +# gateway, you should also include $mydomain. +# +# Do not specify the names of virtual domains - those domains are +# specified elsewhere (see VIRTUAL_README). +# +# Do not specify the names of domains that this machine is backup MX +# host for. Specify those names via the relay_domains settings for +# the SMTP server, or use permit_mx_backup if you are lazy (see +# STANDARD_CONFIGURATION_README). +# +# The local machine is always the final destination for mail addressed +# to user(a)[the.net.work.address] of an interface that the mail system +# receives mail on (see the inet_interfaces parameter). +# +# Specify a list of host or domain names, /file/name or type:table +# patterns, separated by commas and/or whitespace. A /file/name +# pattern is replaced by its contents; a type:table is matched when +# a name matches a lookup key (the right-hand side is ignored). +# Continue long lines by starting the next line with whitespace. +# +# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". +# +mydestination = $myhostname, localhost.$mydomain, localhost +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain +#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, +# mail.$mydomain, www.$mydomain, ftp.$mydomain + +# REJECTING MAIL FOR UNKNOWN LOCAL USERS +# +# The local_recipient_maps parameter specifies optional lookup tables +# with all names or addresses of users that are local with respect +# to $mydestination, $inet_interfaces or $proxy_interfaces. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown local users. This parameter is defined by default. +# +# To turn off local recipient checking in the SMTP server, specify +# local_recipient_maps = (i.e. empty). +# +# The default setting assumes that you use the default Postfix local +# delivery agent for local delivery. You need to update the +# local_recipient_maps setting if: +# +# - You define $mydestination domain recipients in files other than +# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. +# For example, you define $mydestination domain recipients in +# the $virtual_mailbox_maps files. +# +# - You redefine the local delivery agent in master.cf. +# +# - You redefine the "local_transport" setting in main.cf. +# +# - You use the "luser_relay", "mailbox_transport", or "fallback_transport" +# feature of the Postfix local delivery agent (see local(8)). +# +# Details are described in the LOCAL_RECIPIENT_README file. +# +# Beware: if the Postfix SMTP server runs chrooted, you probably have +# to access the passwd file via the proxymap service, in order to +# overcome chroot restrictions. The alternative, having a copy of +# the system passwd file in the chroot jail is just not practical. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify a bare username, an @domain.tld +# wild-card, or specify a user(a)domain.tld address. +# +#local_recipient_maps = unix:passwd.byname $alias_maps +#local_recipient_maps = proxy:unix:passwd.byname $alias_maps +#local_recipient_maps = + +# The unknown_local_recipient_reject_code specifies the SMTP server +# response code when a recipient domain matches $mydestination or +# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty +# and the recipient address or address local-part is not found. +# +# The default setting is 550 (reject mail) but it is safer to start +# with 450 (try again later) until you are certain that your +# local_recipient_maps settings are OK. +# +unknown_local_recipient_reject_code = 550 + +# TRUST AND RELAY CONTROL + +# The mynetworks parameter specifies the list of "trusted" SMTP +# clients that have more privileges than "strangers". +# +# In particular, "trusted" SMTP clients are allowed to relay mail +# through Postfix. See the smtpd_recipient_restrictions parameter +# in postconf(5). +# +# You can specify the list of "trusted" network addresses by hand +# or you can let Postfix do it for you (which is the default). +# +# By default (mynetworks_style = subnet), Postfix "trusts" SMTP +# clients in the same IP subnetworks as the local machine. +# On Linux, this does works correctly only with interfaces specified +# with the "ifconfig" command. +# +# Specify "mynetworks_style = class" when Postfix should "trust" SMTP +# clients in the same IP class A/B/C networks as the local machine. +# Don't do this with a dialup site - it would cause Postfix to "trust" +# your entire provider's network. Instead, specify an explicit +# mynetworks list by hand, as described below. +# +# Specify "mynetworks_style = host" when Postfix should "trust" +# only the local machine. +# +#mynetworks_style = class +#mynetworks_style = subnet +#mynetworks_style = host + +# Alternatively, you can specify the mynetworks list by hand, in +# which case Postfix ignores the mynetworks_style setting. +# +# Specify an explicit list of network/netmask patterns, where the +# mask specifies the number of bits in the network part of a host +# address. +# +# You can also specify the absolute pathname of a pattern file instead +# of listing the patterns here. Specify type:table for table-based lookups +# (the value on the table right-hand side is not used). +# +#mynetworks = 168.100.189.0/28, 127.0.0.0/8 +#mynetworks = $config_directory/mynetworks +#mynetworks = hash:/etc/postfix/network_table + + +# The relay_domains parameter restricts what destinations this system will +# relay mail to. See the smtpd_recipient_restrictions description in +# postconf(5) for detailed information. +# +# By default, Postfix relays mail +# - from "trusted" clients (IP address matches $mynetworks) to any destination, +# - from "untrusted" clients to destinations that match $relay_domains or +# subdomains thereof, except addresses with sender-specified routing. +# The default relay_domains value is $mydestination. +# +# In addition to the above, the Postfix SMTP server by default accepts mail +# that Postfix is final destination for: +# - destinations that match $inet_interfaces or $proxy_interfaces, +# - destinations that match $mydestination +# - destinations that match $virtual_alias_domains, +# - destinations that match $virtual_mailbox_domains. +# These destinations do not need to be listed in $relay_domains. +# +# Specify a list of hosts or domains, /file/name patterns or type:name +# lookup tables, separated by commas and/or whitespace. Continue +# long lines by starting the next line with whitespace. A file name +# is replaced by its contents; a type:name table is matched when a +# (parent) domain appears as lookup key. +# +# NOTE: Postfix will not automatically forward mail for domains that +# list this system as their primary or backup MX host. See the +# permit_mx_backup restriction description in postconf(5). +# +#relay_domains = $mydestination + + + +# INTERNET OR INTRANET + +# The relayhost parameter specifies the default host to send mail to +# when no entry is matched in the optional transport(5) table. When +# no relayhost is given, mail is routed directly to the destination. +# +# On an intranet, specify the organizational domain name. If your +# internal DNS uses no MX records, specify the name of the intranet +# gateway host instead. +# +# In the case of SMTP, specify a domain, host, host:port, [host]:port, +# [address] or [address]:port; the form [host] turns off MX lookups. +# +# If you're connected via UUCP, see also the default_transport parameter. +# +#relayhost = $mydomain +#relayhost = [gateway.my.domain] +#relayhost = [mailserver.isp.tld] +#relayhost = uucphost +#relayhost = [an.ip.add.ress] + +relayhost = [192.168.182.1] + +# REJECTING UNKNOWN RELAY USERS +# +# The relay_recipient_maps parameter specifies optional lookup tables +# with all addresses in the domains that match $relay_domains. +# +# If this parameter is defined, then the SMTP server will reject +# mail for unknown relay users. This feature is off by default. +# +# The right-hand side of the lookup tables is conveniently ignored. +# In the left-hand side, specify an @domain.tld wild-card, or specify +# a user(a)domain.tld address. +# +#relay_recipient_maps = hash:/etc/postfix/relay_recipients + +# INPUT RATE CONTROL +# +# The in_flow_delay configuration parameter implements mail input +# flow control. This feature is turned on by default, although it +# still needs further development (it's disabled on SCO UNIX due +# to an SCO bug). +# +# A Postfix process will pause for $in_flow_delay seconds before +# accepting a new message, when the message arrival rate exceeds the +# message delivery rate. With the default 100 SMTP server process +# limit, this limits the mail inflow to 100 messages a second more +# than the number of messages delivered per second. +# +# Specify 0 to disable the feature. Valid delays are 0..10. +# +#in_flow_delay = 1s + +# ADDRESS REWRITING +# +# The ADDRESS_REWRITING_README document gives information about +# address masquerading or other forms of address rewriting including +# username->Firstname.Lastname mapping. + +masquerade_domains = !lists.rpmfusion.org rpmfusion.org +masquerade_exceptions = root apache + +# ADDRESS REDIRECTION (VIRTUAL DOMAIN) +# +# The VIRTUAL_README document gives information about the many forms +# of domain hosting that Postfix supports. + +# "USER HAS MOVED" BOUNCE MESSAGES +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# TRANSPORT MAP +# +# See the discussion in the ADDRESS_REWRITING_README document. + +# ALIAS DATABASE +# +# The alias_maps parameter specifies the list of alias databases used +# by the local delivery agent. The default list is system dependent. +# +# On systems with NIS, the default is to search the local alias +# database, then the NIS alias database. See aliases(5) for syntax +# details. +# +# If you change the alias database, run "postalias /etc/aliases" (or +# wherever your system stores the mail alias file), or simply run +# "newaliases" to build the necessary DBM or DB file. +# +# It will take a minute or so before changes become visible. Use +# "postfix reload" to eliminate the delay. +# +#alias_maps = dbm:/etc/aliases +alias_maps = hash:/etc/aliases +#alias_maps = hash:/etc/aliases, nis:mail.aliases +#alias_maps = netinfo:/aliases + +# The alias_database parameter specifies the alias database(s) that +# are built with "newaliases" or "sendmail -bi". This is a separate +# configuration parameter, because alias_maps (see above) may specify +# tables that are not necessarily all under control by Postfix. +# +#alias_database = dbm:/etc/aliases +#alias_database = dbm:/etc/mail/aliases +alias_database = hash:/etc/aliases +#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases + +# ADDRESS EXTENSIONS (e.g., user+foo) +# +# The recipient_delimiter parameter specifies the separator between +# user names and address extensions (user+foo). See canonical(5), +# local(8), relocated(5) and virtual(5) for the effects this has on +# aliases, canonical, virtual, relocated and .forward file lookups. +# Basically, the software tries user+foo and .forward+foo before +# trying user and .forward. +# +recipient_delimiter = + + +# DELIVERY TO MAILBOX +# +# The home_mailbox parameter specifies the optional pathname of a +# mailbox file relative to a user's home directory. The default +# mailbox file is /var/spool/mail/user or /var/mail/user. Specify +# "Maildir/" for qmail-style delivery (the / is required). +# +#home_mailbox = Mailbox +#home_mailbox = Maildir/ + +# The mail_spool_directory parameter specifies the directory where +# UNIX-style mailboxes are kept. The default setting depends on the +# system type. +# +#mail_spool_directory = /var/mail +#mail_spool_directory = /var/spool/mail + +# The mailbox_command parameter specifies the optional external +# command to use instead of mailbox delivery. The command is run as +# the recipient with proper HOME, SHELL and LOGNAME environment settings. +# Exception: delivery for root is done as $default_user. +# +# Other environment variables of interest: USER (recipient username), +# EXTENSION (address extension), DOMAIN (domain part of address), +# and LOCAL (the address localpart). +# +# Unlike other Postfix configuration parameters, the mailbox_command +# parameter is not subjected to $parameter substitutions. This is to +# make it easier to specify shell syntax (see example below). +# +# Avoid shell meta characters because they will force Postfix to run +# an expensive shell process. Procmail alone is expensive enough. +# +# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN +# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. +# +#mailbox_command = /usr/bin/procmail +#mailbox_command = /some/where/procmail -a "$EXTENSION" + +# The mailbox_transport specifies the optional transport in master.cf +# to use after processing aliases and .forward files. This parameter +# has precedence over the mailbox_command, fallback_transport and +# luser_relay parameters. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp + +# If using the cyrus-imapd IMAP server deliver local mail to the IMAP +# server using LMTP (Local Mail Transport Protocol), this is prefered +# over the older cyrus deliver program by setting the +# mailbox_transport as below: +# +# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp +# +# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via +# these settings. +# +# local_destination_recipient_limit = 300 +# local_destination_concurrency_limit = 5 +# +# Of course you should adjust these settings as appropriate for the +# capacity of the hardware you are using. The recipient limit setting +# can be used to take advantage of the single instance message store +# capability of Cyrus. The concurrency limit can be used to control +# how many simultaneous LMTP sessions will be permitted to the Cyrus +# message store. +# +# To use the old cyrus deliver program you have to set: +#mailbox_transport = cyrus + +# The fallback_transport specifies the optional transport in master.cf +# to use for recipients that are not found in the UNIX passwd database. +# This parameter has precedence over the luser_relay parameter. +# +# Specify a string of the form transport:nexthop, where transport is +# the name of a mail delivery transport defined in master.cf. The +# :nexthop part is optional. For more details see the sample transport +# configuration file. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must update the "local_recipient_maps" setting in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp +#fallback_transport = + +#transport_maps = hash:/etc/postfix/transport +# The luser_relay parameter specifies an optional destination address +# for unknown recipients. By default, mail for unknown@$mydestination, +# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned +# as undeliverable. +# +# The following expansions are done on luser_relay: $user (recipient +# username), $shell (recipient shell), $home (recipient home directory), +# $recipient (full recipient address), $extension (recipient address +# extension), $domain (recipient domain), $local (entire recipient +# localpart), $recipient_delimiter. Specify ${name?value} or +# ${name:value} to expand value only when $name does (does not) exist. +# +# luser_relay works only for the default Postfix local delivery agent. +# +# NOTE: if you use this feature for accounts not in the UNIX password +# file, then you must specify "local_recipient_maps =" (i.e. empty) in +# the main.cf file, otherwise the SMTP server will reject mail for +# non-UNIX accounts with "User unknown in local recipient table". +# +#luser_relay = $user(a)other.host +#luser_relay = $local(a)other.host +#luser_relay = admin+$local + +# JUNK MAIL CONTROLS +# +# The controls listed here are only a very small subset. The file +# SMTPD_ACCESS_README provides an overview. + +# The header_checks parameter specifies an optional table with patterns +# that each logical message header is matched against, including +# headers that span multiple physical lines. +# +# By default, these patterns also apply to MIME headers and to the +# headers of attached messages. With older Postfix versions, MIME and +# attached message headers were treated as body text. +# +# For details, see "man header_checks". +# +header_checks = regexp:/etc/postfix/header_checks + +# FAST ETRN SERVICE +# +# Postfix maintains per-destination logfiles with information about +# deferred mail, so that mail can be flushed quickly with the SMTP +# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". +# See the ETRN_README document for a detailed description. +# +# The fast_flush_domains parameter controls what destinations are +# eligible for this service. By default, they are all domains that +# this server is willing to relay mail to. +# +#fast_flush_domains = $relay_domains + +# SHOW SOFTWARE VERSION OR NOT +# +# The smtpd_banner parameter specifies the text that follows the 220 +# code in the SMTP server's greeting banner. Some people like to see +# the mail version advertised. By default, Postfix shows no version. +# +# You MUST specify $myhostname at the start of the text. That is an +# RFC requirement. Postfix itself does not care. +# +#smtpd_banner = $myhostname ESMTP $mail_name +#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) + +# PARALLEL DELIVERY TO THE SAME DESTINATION +# +# How many parallel deliveries to the same user or domain? With local +# delivery, it does not make sense to do massively parallel delivery +# to the same user, because mailbox updates must happen sequentially, +# and expensive pipelines in .forward files can cause disasters when +# too many are run at the same time. With SMTP deliveries, 10 +# simultaneous connections to the same domain could be sufficient to +# raise eyebrows. +# +# Each message delivery transport has its XXX_destination_concurrency_limit +# parameter. The default is $default_destination_concurrency_limit for +# most delivery transports. For the local delivery agent the default is 2. + +#local_destination_concurrency_limit = 2 +#default_destination_concurrency_limit = 20 + +# DEBUGGING CONTROL +# +# The debug_peer_level parameter specifies the increment in verbose +# logging level when an SMTP client or server host name or address +# matches a pattern in the debug_peer_list parameter. +# +debug_peer_level = 2 + +# The debug_peer_list parameter specifies an optional list of domain +# or network patterns, /file/name patterns or type:name tables. When +# an SMTP client or server host name or address matches a pattern, +# increase the verbose logging level by the amount specified in the +# debug_peer_level parameter. +# +#debug_peer_list = 127.0.0.1 +#debug_peer_list = some.domain + +# The debugger_command specifies the external command that is executed +# when a Postfix daemon program is run with the -D option. +# +# Use "command .. & sleep 5" so that the debugger can attach before +# the process marches on. If you use an X-based debugger, be sure to +# set up your XAUTHORITY environment variable before starting Postfix. +# +debugger_command = + PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin + xxgdb $daemon_directory/$process_name $process_id & sleep 5 + +# If you can't use X, use this to capture the call stack when a +# daemon crashes. The result is in a file in the configuration +# directory, and is named after the process name and the process ID. +# +# debugger_command = +# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; +# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 +# >$config_directory/$process_name.$process_id.log & sleep 5 +# +# Another possibility is to run gdb under a detached screen session. +# To attach to the screen sesssion, su root and run "screen -r +# <id_string>" where <id_string> uniquely matches one of the detached +# sessions (from "screen -list"). +# +# debugger_command = +# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen +# -dmS $process_name gdb $daemon_directory/$process_name +# $process_id & sleep 1 + +# INSTALL-TIME CONFIGURATION INFORMATION +# +# The following parameters are used when installing a new Postfix version. +# +# sendmail_path: The full pathname of the Postfix sendmail command. +# This is the Sendmail-compatible mail posting interface. +# +sendmail_path = /usr/sbin/sendmail.postfix + +# newaliases_path: The full pathname of the Postfix newaliases command. +# This is the Sendmail-compatible command to build alias databases. +# +newaliases_path = /usr/bin/newaliases.postfix + +# mailq_path: The full pathname of the Postfix mailq command. This +# is the Sendmail-compatible mail queue listing command. +# +mailq_path = /usr/bin/mailq.postfix + +# setgid_group: The group for mail submission and queue management +# commands. This must be a group name with a numerical group ID that +# is not shared with other accounts, not even with the Postfix account. +# +setgid_group = postdrop + +# html_directory: The location of the Postfix HTML documentation. +# +html_directory = no + +# manpage_directory: The location of the Postfix on-line manual pages. +# +manpage_directory = /usr/share/man + +# sample_directory: The location of the Postfix sample configuration files. +# This parameter is obsolete as of Postfix 2.1. +# +sample_directory = /usr/share/doc/postfix-2.10.1/samples + +# readme_directory: The location of the Postfix README files. +# +readme_directory = /usr/share/doc/postfix-2.10.1/README_FILES + +# Enable IPv4, and IPv6 if supported +inet_protocols = ipv4 + +# add this to new postfix to get it to add proper message-id and other +# headers to outgoing emails via the gateway. + +smtpd_relay_restrictions = permit_mynetworks, + permit_sasl_authenticated, + reject_unauth_destination + +message_size_limit = 20971520 +