11:14 p.m.
Hi,
I'm a bit confused with the following error messages when I attempt a "fedup
--network
20" upgrade of my F18 system.
Is this something that I can fix ?? or does it need some changes on the fusion side?
trimmed fedup output..
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686) requires
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686)
mysql-server-5.5.35-1.fc18.i686 (replaced by
1:mariadb-galera-server-5.5.37-2.fc20.i686) requires mysql-server-5.5.35-1.fc18.i686
(replaced by 1:mariadb-server-5.5.37-1.fc20.i686)
....
WARNING: problems were encountered during transaction test:
broken dependencies
mythtv-0.27.1-1.fc20.i686 requires mythtv-0.27.1-1.fc20.i686
kmod-nvidia-3.11.4-101.fc18.i686-1:319.60-3.fc18.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.10-100.fc18.i686-1:319.60-3.fc18.3.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.9-100.fc18.i686-1:319.60-3.fc18.2.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
package conflicts
thanks
3:47 p.m.
On Qua, 2014-06-11 at 09:14 +1000, Paul wrote:
Hi,
I'm a bit confused with the following error messages when I attempt a "fedup
--network
20" upgrade of my F18 system.
Is this something that I can fix ?? or does it need some changes on the fusion side?
trimmed fedup output..
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686) requires
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686)
mysql-server-5.5.35-1.fc18.i686 (replaced by
1:mariadb-galera-server-5.5.37-2.fc20.i686) requires mysql-server-5.5.35-1.fc18.i686
(replaced by 1:mariadb-server-5.5.37-1.fc20.i686)
....
WARNING: problems were encountered during transaction test:
broken dependencies
mythtv-0.27.1-1.fc20.i686 requires mythtv-0.27.1-1.fc20.i686
kmod-nvidia-3.11.4-101.fc18.i686-1:319.60-3.fc18.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.10-100.fc18.i686-1:319.60-3.fc18.3.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.9-100.fc18.i686-1:319.60-3.fc18.2.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686, kernel-3.11.10-100.fc18.i686
package conflicts
I usually remove old kmods and old kernels and disable rpmfusion repos
before use fedup .
The kmod problem appears because, if I am correct, fedup try remove one
old kernel to install a new one . So if you remove some old kernels and
depending kmods you will have a one less problem , be aware fedup have
many problems unfortunately ...
--
Sérgio M. B.
12:43 a.m.
I've now completed the upgrade from F18 --> F20..
I ended up removing these packages ie mythtv and kmod-nvidia and
upgrade went ahead ok except I obviously had to install the
kmod-nvidia package AFTER upgrade to get the graphical boot up to
work.
I wasn't quiet sure what was going on with MySQL I ended up with two
db packages so uninstalled mariadb-galera-server and installed
mariadb-server
this allowed MythTV to work apart from updating the Password HASH ...
I only had one critical issue with my Network interface which I needed
to set my ifcfg-eth0 to be Network_mananged =yes which previously I #
commented out.
so my MythBox is now back up.. I need to research the network
interfaces for future upgrades.
Paul
On Wed, Jun 11, 2014 at 9:14 AM, Paul <mylists(a)wilsononline.id.au> wrote:
Hi,
I'm a bit confused with the following error messages when I attempt a
"fedup --network 20" upgrade of my F18 system.
Is this something that I can fix ?? or does it need some changes on the
fusion side?
trimmed fedup output..
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686) requires
mythtv-0.27-4.fc18.i686 (replaced by mythtv-0.27.1-1.fc20.i686)
mysql-server-5.5.35-1.fc18.i686 (replaced by
1:mariadb-galera-server-5.5.37-2.fc20.i686) requires
mysql-server-5.5.35-1.fc18.i686 (replaced by
1:mariadb-server-5.5.37-1.fc20.i686)
....
WARNING: problems were encountered during transaction test:
broken dependencies
mythtv-0.27.1-1.fc20.i686 requires mythtv-0.27.1-1.fc20.i686
kmod-nvidia-3.11.4-101.fc18.i686-1:319.60-3.fc18.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686,
kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.10-100.fc18.i686-1:319.60-3.fc18.3.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686,
kernel-3.11.10-100.fc18.i686
kmod-nvidia-3.11.9-100.fc18.i686-1:319.60-3.fc18.2.i686 requires
kernel-3.11.9-100.fc18.i686, kernel-3.11.4-101.fc18.i686,
kernel-3.11.10-100.fc18.i686
package conflicts
thanks
8:14 a.m.
New subject: VirtualBox kmod
Fedora has relased the kernel 3.14.9-200, but the corresponding kernel
modules
are not yet available neither on RPM Fusion update repositories, nor on
updates-testing.
Does anyone know the steps to compile the modules and get the RPM package?
(should be kmod-VirtualBox-3.14.9-200.fc20.x86_64-4.3.12-1.fc20)
thanks
2:07 p.m.
New subject: VirtualBox kmod
On Ter, 2014-07-01 at 10:14 +0200, Bruno Taglienti wrote:
Fedora has relased the kernel 3.14.9-200, but the corresponding
kernel
modules
are not yet available neither on RPM Fusion update repositories, nor on
updates-testing.
Does anyone know the steps to compile the modules and get the RPM package?
(should be kmod-VirtualBox-3.14.9-200.fc20.x86_64-4.3.12-1.fc20)
things should get back to normal soon , I hope in time for new kernel
version 3.15.3 that land or is landing on Fedora 20 stable .
Thanks for report
--
Sérgio M. B.
3581
days inactive
3608
days old
rpmfusion-users@lists.rpmfusion.org
4 comments
3 participants
participants (3)
-
Bruno Taglienti -
Paul Wilson -
Sérgio Basto