[Bug 3240] New: bbswitch-kmod
by RPM Fusion Bugzilla
https://bugzilla.rpmfusion.org/show_bug.cgi?id=3240
Bug #: 3240
Summary: bbswitch-kmod
Classification: Unclassified
Product: Package Reviews
Version: Current
Platform: All
OS/Version: GNU/Linux
Status: NEW
Severity: normal
Priority: P5
Component: Review Request
AssignedTo: rpmfusion-package-review(a)rpmfusion.org
ReportedBy: leigh123linux(a)gmail.com
CC: rpmfusion-package-review(a)rpmfusion.org
SPEC:
http://leigh123linux.fedorapeople.org/pub/review/bbswitch/1/bbswitch-kmod...
SRPM:
http://leigh123linux.fedorapeople.org/pub/review/bbswitch/1/bbswitch-kmod...
Suitable for rpmfusion-free.
bbswitch is a kernel module which automatically detects the required ACPI calls
for two kinds of Optimus laptops. It has been verified to work with "real"
Optimus and "legacy" Optimus laptops (at least, that is how I call them). The
machines on which these tests has performed are:
Clevo B7130 - GT 425M ("real" Optimus, Lekensteyns laptop)
Dell Vostro 3500 - GT 310M ("legacy" Optimus, Samsagax' laptop)
(note: there is no need to add more supported laptops here as the universal
calls should work for every laptop model supporting either Optimus calls)
It's preferred over manually hacking with the acpi_call module because it can
detect the correct handle preceding _DSM and has some built-in safeguards:
You're not allowed to disable a card if a driver (nouveau, nvidia) is
loaded.
Before suspend, the card is automatically enabled. When resuming, it's
disabled again if that was the case before suspending. Hibernation should work,
but it not tested.
Precautionary measure :
On some machines, turning off the card is permanent and the card does not
reappear on subsequents reboots, which can result into the screen staying black
all the time, including the BIOS screen. If it occurs, first try to shutdown,
unplug power cord, remove battery, wait 30s, then put everything back in and
boot. If it's not solved, then the solution is to reset the BIOS to factory
settings. Before executing bbswitch for the first time, it is therefore
recommended to take note of the full key sequence in the BIOS to do a reset.
https://github.com/Bumblebee-Project/bbswitch
--
Configure bugmail: https://bugzilla.rpmfusion.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
You are the assignee for the bug.
7 years, 3 months
[Bug 2150] New: Review request: geom - SALOME Geometry Module
by RPM Fusion Bugzilla
https://bugzilla.rpmfusion.org/show_bug.cgi?id=2150
Bug #: 2150
Summary: Review request: geom - SALOME Geometry Module
Classification: Unclassified
Product: Package Reviews
Version: Current
Platform: All
OS/Version: GNU/Linux
Status: NEW
Severity: normal
Priority: P5
Component: Review Request
AssignedTo: rpmfusion-package-review(a)rpmfusion.org
ReportedBy: kmilos(a)gmail.com
CC: rpmfusion-package-review(a)rpmfusion.org
SPEC: http://kmilos.fedorapeople.org/geom.spec
SRPM: http://kmilos.fedorapeople.org/geom-6.3.1.8-1.svn222.fc16.src.rpm
A complete OpenCascade - OCAF based CAD framework. Note that this is not the
original SALOME GEOM project but an effort to create a standalone framework
based on the existing one from SALOME project, with the addition of extra
functionality.
This package can not be included in Fedora because it links with the non-free
OCE library.
This is my first RPM Fusion package, however I packaged for Fedora before
(redshift).
rpmlint output:
rpmlint geom*.rpm
geom.i686: E: incorrect-fsf-address
/usr/share/doc/geom-6.3.1.8/LICENCE.lgpl.txt
geom.src: W: invalid-url Source0: geom-6.3.1.8-svn222.tar.gz
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/quat.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/chunk.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/node.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/node.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/vector.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/light.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/light.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/io.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/background.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/background.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/quat.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/atmosphere.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/atmosphere.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/tcb.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/mesh.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/mesh.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/io.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/chunk.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/tcb.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/matrix.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/matrix.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/types.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/vector.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/material.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/material.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/viewport.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/viewport.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/tracks.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/tracks.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/shadow.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/chunktable.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/ease.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/file.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/file.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/camera.h
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/shadow.c
geom-debuginfo.i686: E: incorrect-fsf-address
/usr/src/debug/geom-6.3.1.8/src/Exchange3DS/lib3ds/camera.c
geom-devel.i686: W: no-documentation
5 packages and 0 specfiles checked; 38 errors, 2 warnings.
--
Configure bugmail: https://bugzilla.rpmfusion.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
You are the assignee for the bug.
7 years, 3 months
[Bug 2804] New: Review Request: jvgs - Minimalistic platform game loosely based on xkcd webcomic
by RPM Fusion Bugzilla
https://bugzilla.rpmfusion.org/show_bug.cgi?id=2804
Bug #: 2804
Summary: Review Request: jvgs - Minimalistic platform game
loosely based on xkcd webcomic
Classification: Unclassified
Product: Package Reviews
Version: Current
Platform: All
OS/Version: GNU/Linux
Status: NEW
Severity: normal
Priority: P5
Component: Review Request
AssignedTo: rpmfusion-package-review(a)rpmfusion.org
ReportedBy: paulo.cesar.pereira.de.andrade(a)gmail.com
CC: rpmfusion-package-review(a)rpmfusion.org
Spec URL: http://pcpa.fedorapeople.org/jvgs.spec
SRPM URL: http://pcpa.fedorapeople.org/jvgs-0.5.1-1.fc20.src.rpm
Description: This game takes place in a world much like ours, which has started
fading away. At a point where nearly everything has gone, a poet
finds himself, alone in a strange world of danger. He starts a journey
along the broken stream of thoughts that's left.
The package is not eligible for fedora because the sound track is
Creative Commons Attribution Non-Commercial Share Alike license;
The Non-Commercial is the problem. It works if stripping the sound
from the installation, but I believe that removes most of the
game experience, and requiring the user to download the sound track
is too much overhead for the user also giving the user could just
enable rpmfusion for other similar content.
Last run of fedora-review on it can be found at:
https://bugzilla.redhat.com/show_bug.cgi?id=914798#c3
This is still my first attempt of getting a package in rpmfusion.
Previously I cancelled 0ad and nvidia-texture-tools requests
because it ended up being approved for Fedora; some of my first
Fedora contributions...
--
Configure bugmail: https://bugzilla.rpmfusion.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
You are the assignee for the bug.
7 years, 3 months
[Bug 2838] New: "Review request: lttng-modules - LTTng 2.x kernel tracer modules"
by RPM Fusion Bugzilla
https://bugzilla.rpmfusion.org/show_bug.cgi?id=2838
Bug #: 2838
Summary: "Review request: lttng-modules - LTTng 2.x kernel
tracer modules"
Classification: Unclassified
Product: Package Reviews
Version: Current
Platform: All
OS/Version: GNU/Linux
Status: NEW
Severity: normal
Priority: P5
Component: Review Request
AssignedTo: rpmfusion-package-review(a)rpmfusion.org
ReportedBy: yannick.brosseau(a)gmail.com
CC: rpmfusion-package-review(a)rpmfusion.org
This is my first packages on RPM Fusion (I'm a fedora packager). They cannot go
in fedora, since they are kernel modules.
SPEC: http://www.dorsal.polymtl.ca/~ybrosseau/fedora/kernel/lttng-modules.spec
SRPM:
http://www.dorsal.polymtl.ca/~ybrosseau/fedora/kernel/lttng-modules-2.1.2...
%description
The LTTng project aims at providing highly efficient tracing tools for Linux.
Its tracers help tracking down performance issues and debugging problems
involving multiple concurrent processes and threads. Tracing across multiple
systems is also possible.
This package contains the LTTng kernel modules. These provide
the ring buffer library and the kernel tracer itself
rpmlint output:
[scientist@fedora rpmbuild]$ rpmlint SPECS/lttng-modules.spec
0 packages and 1 specfiles checked; 0 errors, 0 warnings.
[scientist@fedora rpmbuild]$ rpmlint
/home/scientist/rpmbuild/SRPMS/lttng-modules-2.1.2-1.fc18.src.rpm
1 packages and 0 specfiles checked; 0 errors, 0 warnings.
[scientist@fedora rpmbuild]$ rpmlint
/home/scientist/rpmbuild/RPMS/x86_64/lttng-modules-2.1.2-1.fc18.x86_64.rpm
lttng-modules.x86_64: E: no-binary
1 packages and 0 specfiles checked; 1 errors, 0 warnings.
--
Configure bugmail: https://bugzilla.rpmfusion.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
You are the assignee for the bug.
7 years, 3 months